At first I thought this was impossible, I am using "Light Flow" and always as soon as I unlocked the screen, the led turned off.
But now, I flashed a kernel with touch controls, and I notice that when I wake up the screen with a double tap or a swipe, and I'm on the PIN/etc locker screen, the led is still ON! In fact, it can stay on until I unlock the phone..
If hardware can handle screen and led on at the same time without a problem, there's any way to keep it ALWAYS on without caring if you wake up the phone with the button or unlock it?
Thanks!
Related
This is really weird, my NS just always lights up the screen after I lock the screen.
I locked screen, the screen went black, then after a few seconds the screen turned on just like I pressed the power button.
Why this kind of thing happens? I have reboot my phone, It still the same.
As the title says the phone's screen won't turn on after I ended a longer call, i have to press the power button to get the screen working.
Did it happen to you also?I have this phone for 2 months but it never happened in the beginning, this seems to be a recent issue.
Is it a hardware issue or a software bug?I've tested the proximity sensor and it works just fine as much i can tell, it switches the screen of and on, it never happened to wake the screen during a call and to activate random keys.
Another strange thing that i noticed during a call:If have the keypad up and i lay the phone horizontally the screen won't turn off if i hover my hand over the proximity sensor but if i put the phone vertically the screen goes off or if i hide the keypad the screen also goes instantly off.
im using stock rom light manager for notifications, and have it checked so every notification lights up the screen.
the problem is when the screen starts dimming in a minute, just before locking and letting the LED kick in, it wakes the phone up back to a fully lit up lock screen...and the cycle always continues until I lock manually with finger.
any help????
TheNamelessMan said:
im using stock rom light manager for notifications, and have it checked so every notification lights up the screen.
the problem is when the screen starts dimming in a minute, just before locking and letting the LED kick in, it wakes the phone up back to a fully lit up lock screen...and the cycle always continues until I lock manually with finger.
any help????
Click to expand...
Click to collapse
Check your settings in light manager, make sure there is no notifications pending in there, any you have say read from the lock screen which doesn't appear in my experience clear these as read. Once in a while I have to go in and cancel the notifications (lightflow) is what I use, although I just use to to illuminate the led's not the screen (otherwise my battery would be flat in half a day)
Tablet functions as expected after power-on by presenting lock screen and as expected after unlocked. However, once the screen times-out and turns to black, it will not turn on again no mater what swipe or button is pushed unless the unit is powered off then on again.
Flash stock firmware and test .
jeco7 said:
Tablet functions as expected after power-on by presenting lock screen and as expected after unlocked. However, once the screen times-out and turns to black, it will not turn on again no mater what swipe or button is pushed unless the unit is powered off then on again.
Click to expand...
Click to collapse
same, phone works fine but lock screen wont work after it locks itself, power button works but phone screen wont light up, responsive but no light up.
Same problem. Has anyone come up with a solution yet?
As posted flash stock firmware.
Fails its hardware.
Am i the only one whose screen, when it's off, doesn't turn back on properly? It registers both the fingerprint and the power "button" with haptic feedback, and the screen flickers quickly, but doesn't stay on until trying it finally works randomly, or if i use the squeeze gesture to open the camera immediately after pressing the power button. Locked and stocked too.
What is os version are you running?
Does this happen indoors or out?
I used to have an issue where auto brightness would immediately adjust to 0. The screen itself was on but the backlight was essentially turned of.
Only noticed it outside and auto-brightness was on (didn't even think that might be related to the issue! good call. If it happens again, I'll turn that off and see if the issue persists). Running 8.0.0.0 w/ 1.30.617.2 in USA
I have similar experience with my unlocked U12+ and may be Smart screen affected somehow screen back light. I've tried different combinations of settings (automatic Brightness on/off), Smart screen on/off and I noticed lack off problem in dark room. Even though some very strange reactions off haptic buttons (volume down by itself) makes me think about some general functionality problems of this device.
Has anyone noticed whether pressure on a particular point on the display affects the backlight?
When I squeeze moderately strong with two fingers in the area of the padlock (that is seen in a locked screen), it's the same as pressing the power button.
I've been using HTC flags for a long time, but for the first time I've come across such a touch-sensitive device. Every touch wakes him up, even in my pocket, which uses a battery.
I am terrified that there is no separate adjustment of the power and response style of touch-sensitive locations (haptic buttons, squeeze sensor)