I'm running all stock on my Nexus 5 with 4.4.2. If I talk on the phone with it next to my ear the screen turns on and off as it should, so I know that the proximity sensor works. If I use the speaker phone and have the phone away from me, the screen goes black after a minute (which is what I have the screen timeout set to). The only way I can get it to wake up is to hit the power button. This is not a big deal except if I want the power button to end calls. Is there a way to wake the screen after it times out without using the power button? Or, is there a way to tell the phone not to shut off the screen during calls?
Thanks in advance.
After every reboot,the proximity sensor works fine for the first few calls. It properly turns off the screen during a call when the device is near your ears & turns the screen on when it is moved away.
But post 4-5 calls, the sensor stops working. Irrespective of how you hold the device, the screen does not get turned off. User needs to manually turn the screen off & on using the lock button. This continues for all calls after that.
Rebooting the device fixes this problem again but only for 4-5 calls...
Can Anyone Found The Fix???
Hi Ive had the Galaxy S8 about slightly more than a week, and Im facing this recurring issue whereby the pressure-sensitive home button starts to take light taps as heavy presses, and on some occasions when i turn off the screen, it turns on by itself thinking that I made a hard press. I can feel it as the vibration motors are activated. I tested it using *#0*#, but it works perfectly fine there. Anyone else facing these issues? Can anyone tell me if this is a hardware fault or software?
I've just witnessed it turned phone off and back on and back to normal now had over a week only known this happen once about an hour ago
Never seen it turn on my accident, but it does glitch out sometimes. At times it can register a touch as a hard-press, and it does the double vibration every time I touch the home button. This is fixed with a screen off - screen on switch though, so not a problem for me, and I haven't experienced it after the new update
Got myself the S8 secondhand and while it looks immaculate, I also have this problem. At times the pressure sensitivity doesn't work at all, sometimes it will go through periods of immediately pressing and depressing, and sometimes it'll register a soft press of the home button as a hard press.
Think this is a hardware error? I've tried this in Ultra Power Saving mode and without my case on, and it's always repeatable.
galaxyYtester said:
Never seen it turn on my accident, but it does glitch out sometimes. At times it can register a touch as a hard-press, and it does the double vibration every time I touch the home button. This is fixed with a screen off - screen on switch though, so not a problem for me, and I haven't experienced it after the new update
Click to expand...
Click to collapse
I'm having the double vibration when I hard press the home button problem. It's a hardware problem? And how to fix it? I didn't understand the screen off - screen on switch solution
DZHero said:
I'm having the double vibration when I hard press the home button problem. It's a hardware problem? And how to fix it? I didn't understand the screen off - screen on switch solution
Click to expand...
Click to collapse
Double vibration? Isn't that what is meant to happen? The first vibration when pressing down simulates a real physical button being pushed down, and the second vibration when lifting your finger simulates you releasing the physical button. It's meant to happen, and it's not a hardware or a software problem.
What I meant with screen off - screen on solution is simply turning the screen off, and turning it back on again. It fixes a problem that occurs to me at times, where the double vibration happens every time I tap the virtual home button. Normally it's only meant to happen when pressing the virtual home button forcefully, not on light taps where no pressure is applied.
If the phone is in standby, with display turned off, if you double press the home button, or you keep it pressed, the phone will get back to phone mode with emergency call only. How to disable that damned festure? ?
I recently started having an issue that when I make a phone call and then hit my power button to turn the screen off, it keeps popping back on after a few seconds. It will not stay off.
I dont think its a proximity sensor issue because when I hold it to my face or cover it with my finger, the screen will go off.
Its not good because when I make a call and then turn the screen off and put it in my pocket, the screen will come on and buttons get activated. I have noticed that if I dial and THEN hit HOME key and then use power button to deactivate, screen will stay off. But I dont always remember to do it that way and dont understand why suddenly just using the power button no longer works.
Any advice?
Am i the only one whose screen, when it's off, doesn't turn back on properly? It registers both the fingerprint and the power "button" with haptic feedback, and the screen flickers quickly, but doesn't stay on until trying it finally works randomly, or if i use the squeeze gesture to open the camera immediately after pressing the power button. Locked and stocked too.
What is os version are you running?
Does this happen indoors or out?
I used to have an issue where auto brightness would immediately adjust to 0. The screen itself was on but the backlight was essentially turned of.
Only noticed it outside and auto-brightness was on (didn't even think that might be related to the issue! good call. If it happens again, I'll turn that off and see if the issue persists). Running 8.0.0.0 w/ 1.30.617.2 in USA
I have similar experience with my unlocked U12+ and may be Smart screen affected somehow screen back light. I've tried different combinations of settings (automatic Brightness on/off), Smart screen on/off and I noticed lack off problem in dark room. Even though some very strange reactions off haptic buttons (volume down by itself) makes me think about some general functionality problems of this device.
Has anyone noticed whether pressure on a particular point on the display affects the backlight?
When I squeeze moderately strong with two fingers in the area of the padlock (that is seen in a locked screen), it's the same as pressing the power button.
I've been using HTC flags for a long time, but for the first time I've come across such a touch-sensitive device. Every touch wakes him up, even in my pocket, which uses a battery.
I am terrified that there is no separate adjustment of the power and response style of touch-sensitive locations (haptic buttons, squeeze sensor)