My phone Micromax A44 is rooted.
how to fix the bootloop in it. I tried various methods in it,but all in vain.
IN CMD COMMAND
I tried fastboot but its keep on showing "waiting for device".
I have installed the drivers properly as when i type "adb devices " it shows "device attached is a44".
i also tried to reflash it by SP FLASH tool but it is not detecting my decvice .
kindly please help. ASAP.
camflauged said:
My phone Micromax A44 is rooted.
how to fix the bootloop in it. I tried various methods in it,but all in vain.
IN CMD COMMAND
I tried fastboot but its keep on showing "waiting for device".
I have installed the drivers properly as when i type "adb devices " it shows "device attached is a44".
i also tried to reflash it by SP FLASH tool but it is not detecting my decvice .
kindly please help. ASAP.
Click to expand...
Click to collapse
Sorry i was unavailable...
you will have to reflash entire stock rom using sp flash tool..
Related
Hi all,
I'm trying for days to get my Umi X2 running again.
Momentarily I see the Umi screen, followed bij the start screen where it says android.
Then I see for a few seconds the menu where you can select the language and then reboots.
I tried using Shuame, SP Flash tool and MTK Droid Tools. Nothing seems to work.
Via ADB sideload I can push a package but this gets always aborted.
I used Shuame to push the CWM 6.0.3 recovery to the phone. It states that it worked, but when I reboot to Recovery I can only get to the Factory recovery. Here you can only update software instead of installaing complete zip images.
I read about a guy who had the somewaht same issue. He said that he fumbled around with Shuame and suddenly had a recovery menu of Shuame on his Device.
ADB shell works, but I can;t get to my SDCARD as it says no device found. When I run ADB Devices nothing returns.
I already tried adding my USB device to the ini-file of ADB, to no avail.
Can someone help me get my device running again.
Chucho72 said:
Hi all,
I'm trying for days to get my Umi X2 running again.
Momentarily I see the Umi screen, followed bij the start screen where it says android.
Then I see for a few seconds the menu where you can select the language and then reboots.
I tried using Shuame, SP Flash tool and MTK Droid Tools. Nothing seems to work.
Via ADB sideload I can push a package but this gets always aborted.
I used Shuame to push the CWM 6.0.3 recovery to the phone. It states that it worked, but when I reboot to Recovery I can only get to the Factory recovery. Here you can only update software instead of installaing complete zip images.
I read about a guy who had the somewaht same issue. He said that he fumbled around with Shuame and suddenly had a recovery menu of Shuame on his Device.
ADB shell works, but I can;t get to my SDCARD as it says no device found. When I run ADB Devices nothing returns.
I already tried adding my USB device to the ini-file of ADB, to no avail.
Can someone help me get my device running again.
Click to expand...
Click to collapse
Got it running.
If someone needs instructions, let me know.
err... did u reflash the partion part ?
Sent from my GT-S5360 using xda app-developers app
Ryanrioz said:
err... did u reflash the partion part ?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I used SP Flash Tool to reflash the recovery.img
More Details
I need more details on how did you use the flash tool to solve your problem? I have the same problem here. I need to know how to show (in sp flash tool) where is my downloaded .IMG file. Step by step
Chucho72 said:
Yeah, I used SP Flash Tool to reflash the recovery.img
Click to expand...
Click to collapse
Me Too
toninhocs said:
I need more details on how did you use the flash tool to solve your problem? I have the same problem here. I need to know how to show (in sp flash tool) where is my downloaded .IMG file. Step by step
Click to expand...
Click to collapse
Hi, I have the same problem (silly me), where did you get that recovery.img?
Any hints would be helpful
Thanks
TOM
I have a Doogee DG100 and I changed the build,prop.
After that does not boot.
I have tried to change the permissions with ADB but I get an error after adb shell command "error:close".
I have tried to flash a new rom but I get an error from SP Flash Tool "BROM ERROR:S_NOT_ENOUGH_STORAGE_SPACE(1011)".
Can you please tell me what to do?
psild said:
I have a Doogee DG100 and I changed the build,prop.
After that does not boot.
I have tried to change the permissions with ADB but I get an error after adb shell command "error:close".
I have tried to flash a new rom but I get an error from SP Flash Tool "BROM ERROR:S_NOT_ENOUGH_STORAGE_SPACE(1011)".
Can you please tell me what to do?
Click to expand...
Click to collapse
did u repair that problem?
Hi I found the problem you must remove "fat.img" file from firmware folder and the firmware will be install without problems
I am not sure whether my mobile is Bricked or it has nothing installed in it.It is in boot loop and there is showing a triangle wit exclamatory mark in it,I think it has no recovery installed.
Mobile:-Micromax A62
I tried following idea.
1.Tried using fastboot but fastboot don't detect my phone(drivers are installed).
2.Using DownloadManager,It does not proceed after "Checking Baudrate".
3.Sp tool also don't detect it .
Please Please answer my question .
mayur42 said:
I am not sure whether my mobile is Bricked or it has nothing installed in it.It is in boot loop and there is showing a triangle wit exclamatory mark in it,I think it has no recovery installed.
Mobile:-Micromax A62
I tried following idea.
1.Tried using fastboot but fastboot don't detect my phone(drivers are installed).
2.Using DownloadManager,It does not proceed after "Checking Baudrate".
3.Sp tool also don't detect it .
Please Please answer my question .
Click to expand...
Click to collapse
you can download driver manually from this link: https://www.hard-reset.in/micromax-a62-hard-reset.html
I have drivers
There is no problem with drivers .Even though I installed drivers my phone is not detecting in fastboot devices,So i am unable to flash any recovery from fastboot or sp tool .
Hi, need your help if possible. Trying to unbrick my phone via this tutorial:
https://www.youtube.com/watch?v=boyU1MnI7HU
When i need to flash ROM with "adb sideload" i get error "device not found"
fastboot devices give my phone code, i can flash recovery image without problems. only ADB SIDELOAD GIVE ME ERROR
Help me out please.
or tell me some other was to fix brick
PS: can be this coz of USB debugging is not enabled? cannot enable coz cannot start phone
If debuging usb is not enable adb wont detect your device :/
BuzzFuzz said:
Hi, need your help if possible. Trying to unbrick my phone via this tutorial:
https://www.youtube.com/watch?v=boyU1MnI7HU
When i need to flash ROM with "adb sideload" i get error "device not found"
fastboot devices give my phone code, i can flash recovery image without problems. only ADB SIDELOAD GIVE ME ERROR
Help me out please.
or tell me some other was to fix brick
PS: can be this coz of USB debugging is not enabled? cannot enable coz cannot start phone
Click to expand...
Click to collapse
What does typing "adb devices" give you?
BuzzFuzz said:
Hi, need your help if possible. Trying to unbrick my phone via this tutorial:
https://www.youtube.com/watch?v=boyU1MnI7HU
When i need to flash ROM with "adb sideload" i get error "device not found"
fastboot devices give my phone code, i can flash recovery image without problems. only ADB SIDELOAD GIVE ME ERROR
Help me out please.
or tell me some other was to fix brick
PS: can be this coz of USB debugging is not enabled? cannot enable coz cannot start phone
Click to expand...
Click to collapse
For using ADB sideload your phone must be booted to custom recovery e.g TWRP or CWM and SIDELOAD mode must be started manually.
Hello,
Recently I flashed a CWM file for 'Lava Iris X1' found on this site for my android 'Lava Iris X1 Grand'. Now my phone is stuck in a bootloop. For some reason i cant enter recovery mode even before my phone was stuck in a bootloop. I am not sure whether my phone has USB debugging enabled or not. I rooted my android with KingRoot before all this happened. I have downloaded your Minimal Adb and Fastboot but it cant find my device.
Overall problem:
1) Phone Stuck in Bootloop
2)USB debugging enabled ? Not sure
3) Can't enter recovery mode
4) ADB wont find my device
Note : When I used Minimal Adb and Fastboot, I typed 'fastboot devices' and some numbers appear:
0123456789ABCDEF devices
but when I used the command 'adb devices' my device is not shown:
List of devices attached
I have a backup at my phone through the Flashify app but since recovery mode cant show I cant recover it. I also need a some flash recovery images.
Please help me out here. I don't know what else to do.
Thank You in advance
Fixed
Nevermind guys, i was able to get my phone out of bootloop using SP Flash Tool.
Now all I have to do is restore IMEI.
Marticco said:
Nevermind guys, i was able to get my phone out of bootloop using SP Flash Tool.
Now all I have to do is restore IMEI.
Click to expand...
Click to collapse
Can you please tell me how did you do that.. i am also in the same situation.