Related
I tried installing chainfire3d driver in jellybean( i didnt know then that it is not for JB). Now my nexus wont boot into os. it just stays at the unlocked bootloader logo.
1. I can get into recovery mode
2. I have wiped out the cache and factory reset
3. I dont have a update file in my phone.since nexus dont have an external sd card i cant put any file in it directly.
4. I have tried fastboot -it shows my serial ID and i am able to reboot my phone using it but whenever i try to flash recovery.img or update update.zip it shows "cannot load recovery.img" or "cannot update update.zip"
5. I have tried ADB - on using adb shell it shows "error:device not found"
6. on using Odin (not sure whether it is compatible with Nexus s) it detects my phone. when i tried to flash the stock fireware it fails and my device shows "verify image (radio) fail"
Plz help.Is my phone bricked???????
Ok I don't want to be insulting, but you really REALLY need to read on the whole process of Nexus S rooting and using it.
You don't have to use ODIN at all for something so simple. You simply need to reflash a ROM/your ROM.
Mount your SD from within Clockworkmod recovery and transfer a ROM. Then flash it. Done.
What polo says go to recovery- mount and formay- all the way down "mount sd card". Now your phone will be like a usb drive
Sent from my Nexus S
polobunny said:
Ok I don't want to be insulting, but you really REALLY need to read on the whole process of Nexus S rooting and using it.
You don't have to use ODIN at all for something so simple. You simply need to reflash a ROM/your ROM.
Mount your SD from within Clockworkmod recovery and transfer a ROM. Then flash it. Done.
Click to expand...
Click to collapse
thank u for the suggestion. I just have the stock recovery right now. I tried installing clockwork recovery through fastboot but as i mentioned in my first post i get "error:cannot load recovery.img" .Is there any other way of installing a clockwork recovery?
kwibis said:
What polo says go to recovery- mount and formay- all the way down "mount sd card". Now your phone will be like a usb drive
Sent from my Nexus S
Click to expand...
Click to collapse
thank u for the suggestion. I just have the stock recovery right now. I tried installing clockwork recovery through fastboot but as i mentioned in my first post i get "error:cannot load recovery.img" .Is there any other way of installing a clockwork recovery?
amvignesh said:
thank u for the suggestion. I just have the stock recovery right now. I tried installing clockwork recovery through fastboot but as i mentioned in my first post i get "error:cannot load recovery.img" .Is there any other way of installing a clockwork recovery?
Click to expand...
Click to collapse
is your boot loader unlocked??? (command: fastboot oem unlock)
then in the folder that is your fasboot exe, there is the recovery too?
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Cascabreu said:
is your boot loader unlocked??? (command: fastboot oem unlock)
then in the folder that is your fasboot exe, there is the recovery too?
Click to expand...
Click to collapse
yes it is unlocked(using the command in fastboot also shows already unlocked) and yes the recovery image is in the same folder as that of fastboot.
amvignesh said:
yes it is unlocked(using the command in fastboot also shows already unlocked) and yes the recovery image is in the same folder as that of fastboot.
Click to expand...
Click to collapse
Instead of writting fastboo flash recovery (file name)
Do this fastboot flash recovery (drag and drop file)
Cascabreu said:
Instead of writting fastboo flash recovery (file name)
Do this fastboot flash recovery (drag and drop file)
Click to expand...
Click to collapse
Thanks a lot Cascabreu.it worked . i never knew one could drag and drop files in command prompt(wonder y it didnt work otherwise, I had specified the path correctly).Thanks again..will change the thread topic accordingly....
Yes!!!!! Finally i helped someone!!!!! Hit the thanks button please.
sent from my Nyan NeXus S
I just lolled xD
Sent from my Nexus S
kwibis said:
I just lolled xD
Sent from my Nexus S
Click to expand...
Click to collapse
helppp..im also facing the same prob...i dun know how to run adb shell and those stufff after that...:crying:
C4SCA said:
Yes!!!!! Finally i helped someone!!!!! Hit the thanks button please.
sent from my Nyan NeXus S
Click to expand...
Click to collapse
Good job.. I wouldn't have thought of that...
Sent from my Nexus S using XDA Premium 4 mobile app
C4SCA said:
Yes!!!!! Finally i helped someone!!!!! Hit the thanks button please.
sent from my Nyan NeXus S
Click to expand...
Click to collapse
hi there i also need help with almost the same problem, im using alcatel one touch pop c1, i have rooted it a while ago and the decide to install chainfire 3d i didnt know it doesnt work on jelly bean and now my phone cant boot, i tried doing factory reset but nothing happens it just shows the logo and plays that start up sound but can go past that, i have no back up or anything, and please try to explain in a best possible way im not so good when it comes to computers thanks in advance
tlangey said:
hi there i also need help with almost the same problem, im using alcatel one touch pop c1, i have rooted it a while ago and the decide to install chainfire 3d i didnt know it doesnt work on jelly bean and now my phone cant boot, i tried doing factory reset but nothing happens it just shows the logo and plays that start up sound but can go past that, i have no back up or anything, and please try to explain in a best possible way im not so good when it comes to computers thanks in advance
Click to expand...
Click to collapse
either u can find onlien a way to flash back to stock.
or ur best bet is to go to the store and say u got an update but it failed and that now its not turning on. Warranty will cover that
RECOVERY IMAGE for SU760 ICS leak build for P920
This is all based on wkpark's thread here but focused only for p920.
ClockWorkMod(6.0.1.5) and TWRP(2.2.2.1) images as flashable images, to be used after you installed WKPark's alternate bootloader using his root signature. then we get full recovery back working on top of ICS.
Instructions on how to install the recovery.
Click to expand...
Click to collapse
Download wkparks fastboot loader from here
and extract contents into a temp folder.
1a. follow his instructions on how to install device drivers then goto step 2 or
1b.
remove battery, attach usbcable between pc and mobile.
Install the omap4430 driver, when you see a device appearing in "devicemanager" named omap4430,
rightclick on it and install driver from the 7z download and look in folder usb_drv_windows for the device driver.
remember to be fast to rightclick as it wil disappear and re-appear often until driver is installed.
1c. pc will find and install driver at next mobile restart (which is some seconds after.
Download the modified x-loader.bin,u-boot.bin,boot.img from this post and extract content into the temp folder from step1 and put files into the files directory found there.
extract attached p920-2-twrp.zip to the files folder you find in your files directory in the temp folder
extract attached p920-3-cwm.zip to the files folder you find in your files directory in the temp folder
remove battery and disconnect usb cable from mobile.
enter the temp you extracted to at step1, and run start_fastboot and select "2" in the menu shown in the commandline console.
attach usb cable
wait for the "start_fastboot to show alot of details and show booting 2ndboot.
attach battery when the 2ndboot information shows
fastboot v0.5 should be shown with a grey LG logo on your mobile now. , if not, go back and follow steps again.
at this stage, it can happen that "fastboot" driver for "LG Cosmo" device is installing but cannot find a driver, so you need to update driver through device manager, and point to the drivers, where the omap4430 driver was located too and update it.
Now its time to flash to new files run the 3 commands (one by one, do not try to copy/paste all 3 lines) shown just below as shown.
execute: fastboot flash x-loader files\x-loader.bin
execute: fastboot flash u-boot files\u-boot.bin
execute: fastboot flash boot files\boot.img
Lastly time to flash your recovery,
execute: fastboot flash recovery files\cwm.img
or
execute: fastboot flash recovery files\twrp.img
you cannot flash both images, as its not possible to have both recoveries installed.
11-nov-2012 - BOOTING INTO RECOVERY
Click to expand...
Click to collapse
You can always boot into recovery by holding 3D-BUTTON + VOL-UP down while pressing power-button to turn on mobile (without any cables attached to pc or power).
NOTES:
Click to expand...
Click to collapse
- If you do happen to get a bootloop it has been mentioned now, that it can happen if you copy/paster fastboot commands into the commandline shell.
these steps do NOT change anything of your system or data. it is only the bootloaders and boot.img/recovery.img which will change for the ICS build.
- both recoveries got USB mount storage issues, you will have to transfer files to sdcard or internal memory through windows.
- IMPORTANT: do not try and restore boot.img partition (before this install) from your ICS backups, it will cause the mobile not to boot.
and you will have to do the fastboot steps flashing this boot.img again. (it is caused by the signature is no longer a match)
THANKS TO:
Click to expand...
Click to collapse
wkpark - for his incredible work on getting us a custom uboot (still signed but a big help) - we await the unsigned boot
milaq - for the initial work on recoveries for our devices and cwm/twrp is used as base in these 2 images attached.
xbsall - the original release of ICS for p920/su760 edition.
A FEW STATEMENTS - CONFIRMING IT WORKS:
Click to expand...
Click to collapse
GlossGhost said:
I just installed it and it works as it should.
Click to expand...
Click to collapse
lemach said:
I have installed it on w7 64 bits and no problems. also i have installed rom manager and i can restart into recovery through rom manager o through app like quickboot.
Click to expand...
Click to collapse
Here is an alternative:
- download p920-1.zip and unpack to a temp directory.
- download usb_drv_windows.zip and install the driver. This is done when you see "omap4430" appear for a few seconds in device manager, when you attach phone to pc using usb without battery inserted.
- when driver is installed, install one of the recoveries attached to post #1 and unpack to the temp directory too, and finally run "runme.bat" from the temp directory you unpacked. and follow guideline here.
- when you see the commandline information "wait 5 seconds", you re-insert the battery.
- When "fastboot v0.5" shows in the optimus 3D display, you might need to install the fastboot driver(device: LG Cosmo) as well also located in the same zip above where OMAP4430 is found.
- If you do not get the "fastboot v0.5" in the phone display, something went wrong. and you might need to double check that your device manager in windows also shows the "OMAP4430 FastBoot USB device"
Never mind, wainting for a fix. Thanks
sorry guys, my guide works fine and so does the TWRP image and getting into it. But problem is, it seems original recovery does a trick to reset the flag "booting into recovery". So problem now is that it keeps booting into recovery and it cannot boot normally if you get TWRP started once.
I flashed back the original recovery for now and it works fine, when i sign that image with the new signature as well. but not worth much
booting original recovery once and the flag is reset and normal boot is possible.
Ill dig into this and report back and upload a working image, when i figured out the workaround this sad behaviour.
First, thanks for the tutorial and for your work. I wanted to know if this tutorial could be installed boot.img compiled by myself.
Google Translator
Enviado desde TheDarkRoom
adri_360 said:
First, thanks for the tutorial and for your work. I wanted to know if this tutorial could be installed boot.img compiled by myself.
Click to expand...
Click to collapse
yes, we can make custom boot.img as well with the solution he made. scripts and solution is posted in same thread mentioned in step1. i used it to create the recovery.img, but same goes for boot.img.
I hope u can find the solution for this. For some people like me, after we flash the bin, fls, root the device and use twrp. It just wont boot to recovery. So i hope this would work. But thanks again to xbsall for bringing ics to our device. At least now im on ics. Is there anyway i can use original recovery? So u can make a backup and restore if i need to reflash the ics bin again?
Thanks
Sent from my GT-P7500 using xda app-developers app
and it is working!!!!!
Finally got the continous reboot to recovery fixed!!!!
The images are bootable and do only reboot once into the recovery now.
the fix was to use some of the original binaries in the recovery so that mounts and binaries were started once.
So its all ok now.
I have also compiled a new CWM v6.0.1.5 from Recovery Builder clockworkmod, so its using latest release here, but it is not tested yet for full functionality.
This is nice. Thanks.
Sent from my LG-P920 using xda app-developers app
Thank you very much!! now it is late for me, but tomorrow i will follow your guide.
HELL YEAH! haha
HUGE THANKS, MAN!!! :victory: I was just about to flash the whole ROM again, just to make the TWRP work again :crying:
Im goin to start downloading and following the guide in a few min's.
I'll report as soon as im done with it :good:
-TMP
---------- Post added at 11:37 PM ---------- Previous post was at 10:50 PM ----------
ok.. im stuck @ 11.
"waiting for device"
it just wont start flashing. so i went to device manager and theres this new "connection" called LG Cosmo
and it says that the drivers for LG Cosmo are not installed.. what to do?
TMProduct1onZ said:
ok.. im stuck @ 11.
"waiting for device"
Click to expand...
Click to collapse
im stuck on highways, but where, might sometime be a good question if you want to avoid it
you cannot get much help unless you give more, so that kinda ends here.
but it might just be that when the OMAP4430 driver is installed and it loads fastboot v0.5 menu, it could be that the "fastboot" driver also needs to be updated.
check your device manager and find any new android device, and refer to the drivers you got with the step1 package or from my post#2 (i believe it could be your LG Cosmo device)
hmm
Dexter_nlb said:
im stuck on highways, but where, might sometime be a good question if you want to avoid it
you cannot get much help unless you give more, so that kinda ends here.
but it might just be that when the OMAP4430 driver is installed and it loads fastboot v0.5 menu, it could be that the "fastboot" driver also needs to be updated.
check your device manager and find any new android device, and refer to the drivers you got with the step1 package or from my post#2 (i believe it could be your LG Cosmo device)
Click to expand...
Click to collapse
lol ive told you where exactly i stuck :/
ok.. im stuck @ 11.
"waiting for device"
it just wont start flashing. so i went to device manager and theres this new "connection" called LG Cosmo
and it says that the drivers for LG Cosmo are not installed.. what to do?
Click to expand...
Click to collapse
So...
ive installed the LG COSMO drivers and it flashed.
and here's what happend:
-rom manager installed, reboot recovery
-bootloop
-had to flash XBSA404 again :/
-tryed again, same (bootloop)
-gived up
so at the end i had to do exactly that what ive tryed to avoid lol
but one good thing happend tho': Dualclock is gone :good:
now ive installed p940 recovery/TWRP again and it works...
Dont know if its only me
TMProduct1onZ said:
Dont know if its only me
Click to expand...
Click to collapse
you are not alone, its all those that do not understand the installation and wkpark's guide on using his tool. it is not that simple as just running an app. if drivers fail to install or you install the wrong driver, you never get fastboot opened, and if you never see fastboot menu on the phone when the tool starts and you insert battery as his guide says many things goes wrong.
but the instructions cannot be much more simple as they are, its 2 drivers its some steps in a command line to execute and thats pretty much it.
I will try it asap. I could go into fastboot mode last time so finger crossed. For those u have some problem going to fasboot mode try search the how to recover ur device to gb from xbsall. It works for me
Sent from my GT-P7500 using xda app-developers app
Dexter_nlb said:
you are not alone, its all those that do not understand the installation and wkpark's guide on using his tool. it is not that simple as just running an app. if drivers fail to install or you install the wrong driver, you never get fastboot opened, and if you never see fastboot menu on the phone when the tool starts and you insert battery as his guide says many things goes wrong.
but the instructions cannot be much more simple as they are, its 2 drivers its some steps in a command line to execute and thats pretty much it.
Click to expand...
Click to collapse
Hmm idk... maybe i really did something wrong but im sure it was all ok i did see the fastboot menu and i executed everything.
However ill do a backup and then try again later today
Sent from my P920 using ICS 4.0.4 by XBSA
Now its time to flash to new files run the 3 commands shown just below as shown.
fastboot flash x-loader files\x-loader.bin
fastboot flash u-boot files\u-boot.bin
fastboot flash boot files\boot.img
I could start fastboot with the grey logo and fastboot v0.5 on the top left of my device
when i type fastboot flash x-loader files\x-loader.bin
it says waiting for device
after i waited for 2-3 minutes the device just boot normally.
what did i do wrong?
thanks
edit:
i flashed all the command sucessfully
install rom manager
reboot into recovery and it boot loop
it only shows twrp logo and then reboot to lg logo
what should i do?
HOW TO INSTALL RECOVERY IMAGE WITH SUCCESS
I just installed it and it works as it should.
Here's how to do it.
1. Boot into fastboot
2. After installing drivers for OMAP and LG Cosmo, start the shell.
3. Execute lines one by one:
fastboot flash x-loader files\x-loader.bin
then
fastboot flash u-boot files\u-boot.bin
and
fastboot flash boot files\boot.img
EXECUTING THEM ALL WILL LEAD IN A BOOTLOOP, DONT WORRY ITS FINE
4. Boot into fastboot and flash them again.
fastboot flash x-loader files\x-loader.bin
then
fastboot flash u-boot files\u-boot.bin
and
fastboot flash boot files\boot.img
5. Flash recovery image.
fastboot flash recovery files\cwm.img
or
fastboot flash recovery files\twrp.img
After boot, install ROM Manager and reboot into recovery.
If you still have problems, go back and do everything right.
GlossGhost said:
HOW TO INSTALL RECOVERY IMAGE WITH SUCCESS
I just installed it and it works as it should.
Here's how to do it.
Click to expand...
Click to collapse
thanks, hope your assistance above will help those still failing, because when it works, its actually rather nice to have working.
i will also try to improve the documentation executing the lines now.
awi05 said:
what did i do wrong?
Click to expand...
Click to collapse
try and flash all the "fastboot" files as written once more, and maybe for testing purposes, try the cwm.img instead of twrp image. you can also switch to twrp when you see you got it working. i do not flash all files switching, only cwm or twrp images needs to be flashed.
When the bootloader is updated, we can actually flash boot and recovery images from a shell prompt now. as long as the image is with signature. but fastboot will just be a brick recovery step when you first got it working.
In case you ever want to claim warranty.
Instructions:
Download ADB and recovery.zip.
Extract both to same folder.
Power down device.
Reboot into fastboot by pressing the 'Volume up + Power' buttons.
Connect phone to PC using USB cable
Open Command Prompt and CD to the ADB directory.
Type the command below
Code:
fastboot flash recovery recovery.img
Code:
fastboot reboot
Downloads:
ADB and Fastboot courtesy @ankur850 from here https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
Stock recovery from here: http://www.mediafire.com/download/j7h4u4x2nfnm676/recovery.zip
Hit Thanks :good: if this thread is helpful.
Refer this link for commonly asked questions before posting your doubts.
stuck at waiting for device
hi , i am trying to restore my xolo play to stock odexed rom provided at http://forum.xda-developers.com/showthread.php?p=44264063
. when i connected my phone , its saying waiting for the device. I know i am missing some drivers . Can you explain the procedure to install the drivers.
Thanks.
deepaktom said:
In case you ever want to claim warranty.
Instructions:
Download ADB and recovery.zip.
Extract both to same folder.
Power down device.
Reboot into fastboot by pressing the 'Volume up + Power' buttons.
Connect phone to PC using USB cable
Open Command Prompt and CD to the ADB directory.
Type the command below
Code:
fastboot flash recovery recovery.img
Code:
fastboot reboot
Downloads:
ADB and Fastboot courtesy @ankur850 from here https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
Stock recovery from here: http://www.mediafire.com/download/j7h4u4x2nfnm676/recovery.zip
Hit Thanks :good: if this thread is helpful.
Click to expand...
Click to collapse
sreekar said:
hi , i am trying to restore my xolo play to stock odexed rom provided at http://forum.xda-developers.com/showthread.php?p=44264063
. when i connected my phone , its saying waiting for the device. I know i am missing some drivers . Can you explain the procedure to install the drivers.
Thanks.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=43981028
installed drivers: but returns Failed
Hi i was able to install drivers. after lot of searching.
now when i sent command "astboot oem get_identifier_token" it is aying Failed.
when i searched , i found out that bootloader needs to be unlocked. can you explain in steps how to do this? and will i loose warrenty if i do this?
currently :
i did an ota update. its resulting in improper video playback. so i want to flash recovery rom.
thanks.
deepaktom said:
Try this
http://forum.xda-developers.com/showthread.php?p=43981028
Click to expand...
Click to collapse
sreekar said:
Hi i was able to install drivers. after lot of searching.
now when i sent command "astboot oem get_identifier_token" it is aying Failed.
when i searched , i found out that bootloader needs to be unlocked. can you explain in steps how to do this? and will i loose warrenty if i do this?
currently :
i did an ota update. its resulting in improper video playback. so i want to flash recovery rom.
thanks.
Click to expand...
Click to collapse
This one is not like other phones man. Boot loader is already unlocked
Sent from my XOLO Play using Tapatalk 2
sreekar said:
Hi i was able to install drivers. after lot of searching.
now when i sent command "astboot oem get_identifier_token" it is aying Failed.
when i searched , i found out that bootloader needs to be unlocked. can you explain in steps how to do this? and will i loose warrenty if i do this?
currently :
i did an ota update. its resulting in improper video playback. so i want to flash recovery rom.
thanks.
Click to expand...
Click to collapse
The bootloader is already unlocked & to flash recovery ,use instruction given by deepak or use app flashify from play store
Flashing with a custom rom.
har****181 said:
The bootloader is already unlocked & to flash recovery ,use instruction given by deepak or use app flashify from play store
Click to expand...
Click to collapse
hi,
from the link,
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
i don't have custom recovery installed.
and i don't have a memory card.
what i need to do if i want to install odexed rom install.
does custom recovery installation involves rooting phone?
is it not possible to flash unrooted phones?
update:
i did
fastboot flash boot boot.img
from the boot.img file from odexed rom zip.
Is my warranty still intact?
what i did by flashing the boot partition?
boot.img is only 8 MB what is the other content present in the rom zip file and how its used?
thanks,
sreekar
sreekar said:
hi,
from the link,
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
i don't have custom recovery installed.
and i don't have a memory card.
what i need to do if i want to install odexed rom install.
does custom recovery installation involves rooting phone?
is it not possible to flash unrooted phones?
update:
i did
fastboot flash boot boot.img
from the boot.img file from odexed rom zip.
Is my warranty still intact?
what i did by flashing the boot partition?
boot.img is only 8 MB what is the other content present in the rom zip file and how its used?
thanks,
sreekar
Click to expand...
Click to collapse
OK I'll spend some time here so you can understand. Warranty can be checked in most phones with locked bootloaders . ours is not locked. Bootloader locked means no change can be made unofficially by us.
The only way they can find warranty on our phone is if you use official root method.
For this purpose we have unofficial root method.
Now about partitions. /boot is the kernel. Its like drivers for your hardware.
/system is the os. It is either rooted or unrooted like in windows having admin account or normal account.
You can either use an OS which has already admin account by using a rooted ROM or you can use a limited unrooted ROM and then root it thereby making it an admin account.
Now recovery is a mini OS which will help you to recover your OS in case something is wrong. Stock recovery has limited options and allows only official updates. Custom recovery has more options and allows unofficial updates like our prerooted already admin OS/ROM.
Finally fast boot is like your Intel BIOS. Whatever happens as long as it is working you're saved. All other things like recovery, boot, system can be modified from here.
Now you flashed boot.img using fast boot and if you got a success message you're good. Use a recovery image in one of the xolo play threads and flash it using the instructions provided there.
This is required for you to install ROM.
Finally, don't worry about warranty. In case you ever need warranty, follow instructions in my ROM post about warranty. Where you can flash the ROM and recovery that came with the phone. So no worries and good luck.
Edit: for you, since you're so worried, simply install cwm recovery, then install stock odexed ROM, install build.prop.zip then reinstall stock recovery and you're like how u purchased the phone.
Sent from my XOLO Play using Tapatalk 4
i m having this problem .. after typing command it keeps displaying waiting for device .. nothing happens after that .. wat am i doing wrong . ( i tired instaling drivers but it says -windows has determined software is up to date) what shud i do .. cant install ny rom too
mkr17 said:
i m having this problem .. after typing command it keeps displaying waiting for device .. nothing happens after that .. wat am i doing wrong . ( i tired instaling drivers but it says -windows has determined software is up to date) what shud i do .. cant install ny rom too
Click to expand...
Click to collapse
right click the device under device manager and select uninstall. then replug device and browse and select the driver
http://support.moulnisky.com/index.php?dir=Xolo/Xolo Play/
Here factory firmware and instructions
BR
Alex
http://forum.xda-developers.com/showpost.php?p=47122148&postcount=881
Posted the same here
btw, There is an S018 fw out too. Those linked above are outdated.
Free Radical said:
http://forum.xda-developers.com/showpost.php?p=47122148&postcount=881
Posted the same here
btw, There is an S018 fw out too. Those linked above are outdated.
Click to expand...
Click to collapse
Yes,
Already added it in the support area
BR
Alex
mr moulinsky i have karbonn A8 device i flash software but now device is show fizzy and white display with china sound no karbonn logo please help me how to flash karbonn A8 with right flash files
Sent from my Micromax A76 using XDA Premium 4 mobile app
HELP!!
kkbs4u said:
mr moulinsky i have karbonn a8 device i flash software but now device is show fizzy and white display with china sound no karbonn logo please help me how to flash karbonn a8 with right flash files
sent from my micromax a76 using xda premium 4 mobile app
Click to expand...
Click to collapse
my xolo play t1000 is locked due to too many pattern locks. Now it is asking for gmail id & password but my data is off. Now i got struck as my xolo secure is on i cannot wipe data/factory reset the phone. What should i do to unlock also i dont want to loose my warranty.i also cannot visit the service center as it will cost me a flight fare of 6000 bucks. Help me!!!!
Thanks in advance..
morning.revz08 said:
my xolo play t1000 is locked due to too many pattern locks. Now it is asking for gmail id & password but my data is off. Now i got struck as my xolo secure is on i cannot wipe data/factory reset the phone. What should i do to unlock also i dont want to loose my warranty.i also cannot visit the service center as it will cost me a flight fare of 6000 bucks. Help me!!!!
Thanks in advance..
Click to expand...
Click to collapse
try booting into recovery and factory resetting the device...press vol down+power button to boot into recovery and then wipe data/factory reset
So I'm using Elephone P6000 (Aka Just5 Blaster2 as named in Latvia).
I searched many places couldn't find anything.
Tried to open bootloader via fastboot but "fastboot oem unlock" or "fastboot flashing unlock" doesn't work and shows me error
"FAILED (Remote: Unknown command)" But the second option was mentioned on help. Also I didn' t found oem unlock option in dev options.
So post any ways how to root.
Ps My android version is 5.0
Just install SuperSU from Play Store and let it update binary. The phone i factory bootloader unlocked and prerooted.
It can't download su binary because of android 5
It has nothing to do with lollipop, how do you try to do that?
nlooooo said:
It has nothing to do with lollipop, how do you try to do that?
Click to expand...
Click to collapse
It shows: There is no su binary and SuperSU cannot install it. This is a problem!
If you just installed android 5 you have to re root.
It said something like that.
Ok, I didn't have that problem.
Have you tried with Kingroot.
nlooooo said:
Ok, I didn't have that problem.
Have you tried with Kingroot.
Click to expand...
Click to collapse
Yes, I tried every app. Can't you tell how to do it manually or at least help me with the problem I can; t flash custom recovery.
It shows that I have flashed it but I still have old stock recovery. I used fastboot.
Use SP Flash Tools to flash custom recovery. You can find TWRP recovery on needrom site, and you have a lot of tutorials how to use SP Flash Tools.
It doesn't work. I turned phone off and on and still just stands still and does nothing.
In which mode I have to turn phone on?
I used stock ROM text and carliv recovery to flash.
To use Flash Tool you need to turn of the phone, remove the battery, press download button in tool and then connect your phone, not turning it on. I got an error trying to flash recovery with Flash Tool, but it's not a real error, phone simply disconnected from PC before it checks if the flash was successful.
Nothings happens Just shows "Super Phone flash tool(Runtime trace mode).
I did everything I need, connected via usb with no battery in phone.
I have phone normal and adb drivers. Meh.
Have you even red some tutorial how to use SP Flash Tool?
Try with tool and tutorial from here:
http://bbs.elephone.hk/thread-1037-1-1.html#.Vryb6fIrK01
As I told you, you need to start Flash tool, select rom to flash (scatter file), in your case to deselect all partitions, select custom recovery, click on download and then to connect phone to PC. It's all written in tutorial, all you need is to read.
I have the same problem,this phone seems to be unrootable and without the possibility to flash a costum recovery,help me please,MMI TEST on the device appears everytime I reboot phone and I launch an app so I want costum recovery to manually root and remove this system app,HELP PLEASE.
Custom recovery flashing and rooting your phone are advanced user activities, if you can't learn how to use SP Flash Tool you shouldn't try to do it.
nlooooo said:
To use Flash Tool you need to turn of the phone, remove the battery, press download button in tool and then connect your phone, not turning it on. I got an error trying to flash recovery with Flash Tool, but it's not a real error, phone simply disconnected from PC before it checks if the flash was successful.
Click to expand...
Click to collapse
Tell me all drivers what I need for SP Flash tool.
LV_User said:
Tell me all drivers what I need for SP Flash tool.
Click to expand...
Click to collapse
As I already posted you have it all here:
http://bbs.elephone.hk/thread-1037-1...l#.Vryb6fIrK01
For Win 8-10 you need to disable driver signature verification.
nlooooo said:
As I already posted you have it all here:
http://bbs.elephone.hk/thread-1037-1...l#.Vryb6fIrK01
For Win 8-10 you need to disable driver signature verification.
Click to expand...
Click to collapse
Broken link, nothing writen there.
LV_User said:
Broken link, nothing writen there.
Click to expand...
Click to collapse
How about this one?
http://bbs.elephone.hk/thread-1037-1-1.html#.VPQ3RPRAWk4
And here you can find the latest stock rom:
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=5486&extra=page=1&ordertype=2#.Vr4BZPIrK02
nlooooo said:
How about this one?
http://bbs.elephone.hk/thread-1037-1-1.html#.VPQ3RPRAWk4
And here you can find the latest stock rom:
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=5486&extra=page=1&ordertype=2#.Vr4BZPIrK02
Click to expand...
Click to collapse
Wizard failed to install 6 (Probably all) drivers.
Google Inc. (WinUSB) AndroidUsbDeviceClass (12/06/2010 4.0.0000.00000)
MediaTek Inc. (wdm_usb) Ports (09/11/2014 3.0.1437.1)
MediaTek (Modem) Modem (05/26/2014 3.0/1422.1)
MediaTek Inc. Net (07/14/2011 1.1129.00)
MediaTek (wdm_usb) Ports (05/26/2014 3.0.1422.1)
Microsoft (WUDFRd) WPD (02/22/2006 5.2.5326.4762)
All have error "Install failed"
(And why the hell I need stock rom)
LV_User said:
Wizard failed to install 6 (Probably all) drivers.
Google Inc. (WinUSB) AndroidUsbDeviceClass (12/06/2010 4.0.0000.00000)
MediaTek Inc. (wdm_usb) Ports (09/11/2014 3.0.1437.1)
MediaTek (Modem) Modem (05/26/2014 3.0/1422.1)
MediaTek Inc. Net (07/14/2011 1.1129.00)
MediaTek (wdm_usb) Ports (05/26/2014 3.0.1422.1)
Microsoft (WUDFRd) WPD (02/22/2006 5.2.5326.4762)
All have error "Install failed"
(And why the hell I need stock rom)
Click to expand...
Click to collapse
What Windows do you use?
You need stock rom because of the scatter file.
My question is: Is there any way that i can install any custom recovery now, when I am locked out of my phone, so I can try Method 7 from this post . I have enabled USB debugging, but for some reason, my device is unauthorized from executing adb commands.
I have Xiaomi Redmi Note 3, and have forgotten its password. I have tried Method 2, 5 and 6 from this post, but to no avail.
I tried method 2 and 5 which requires ADB to be installed, but I was not able to access my phone. I have USB debugging enabled and my phone is not rooted. When I tried to run the following code:
Code:
adb devices
adb shell
it showed that my phone is unauthorized and error: device unauthorized This adb server's $ADB_VENDOR_KEYS is not set
Here's the screenshot:
When trying method 6, I had to change the path of ADB driver because the file I downloaded from the post, had its own ADB driver which clashed with my already installed ADB driver, but even after that, it again showed the above error. Here' the screenshot:
Finally I want to try method 7 from the above post, which requires custom recovery to be installed on the phone, is there any way now?
Though it seems now that the I have only one option left and that is to factory reset my phone, but if , there is any other way by which I can bypass my lock screen, please please please inform me.
Of course you can. Just boot your phone into fastboot and do "fastboot flash recovery <recovery image name>.IMG" and you'll flash it. And you can't access the adb because your screen is locked... This is how companies prevent phone hacking
So flash custom recovery, backup the /data , factory reset and after resetting restore the /data backup. And you're good to go. I suggest you using TWRP, because I use it and it never left me hanging Keep me updated.
Sent from Lenovo a6000 1GB version.
Install TWRP or CWM with fastboot and then flash the Unlock me! zip that I've created and you won't lose your data.
Sent by my iPad using Tapatalk
joe2k01 said:
Install TWRP or CWM with fastboot and then flash the Unlock me! zip that I've created and you won't lose your data.
Sent by my iPad using Tapatalk
Click to expand...
Click to collapse
Didn't know that such package existed... I'd still do it my way if your phone was laggy/corrupted,... Else do the package flash. Keep me updated!
Sent from Lenovo a6000 1GB version.
Thanks! a lot, could you please guide me a little bit, how should I proceed?
MGlolenstine said:
Of course you can. Just boot your phone into fastboot and do "fastboot flash recovery <recovery image name>.IMG" and you'll flash it. And you can't access the adb because your screen is locked... This is how companies prevent phone hacking
So flash custom recovery, backup the /data , factory reset and after resetting restore the /data backup. And you're good to go. I suggest you using TWRP, because I use it and it never left me hanging Keep me updated.
Sent from Lenovo a6000 1GB version.
Click to expand...
Click to collapse
Thanks! a lot for reply, As I am still a newbie and trying to learn few things. Could you please guide me how should I proceed?
Like What files I need to download and from where? Also how should I use these files to install recovery?
dost25 said:
Thanks! a lot for reply, As I am still a newbie and trying to learn few things. Could you please guide me how should I proceed?
Like What files I need to download and from where? Also how should I use these files to install recovery?
Click to expand...
Click to collapse
OK... So first boot into fastboot. When you've done that, connect It to your pc with usb, download fastboot package from somewhere on xda(you'll find it).
Open command prompt "CD" to the directory where your fastboot is located in, put recovery image in the folder where fastboot.exe is and type "fastboot flash recovery <recovery file name>.IMG". I'm gonna update this answer in 2 days, when I get to my pc, so try to do it by these instructions, if something isn't working, comment and we'll resolve the problem. If something isn't clear, just ask. Keep me updated.
Sent from Lenovo a6000 1GB version.
Ok i will try
MGlolenstine said:
OK... So first boot into fastboot. When you've done that, connect It to your pc with usb, download fastboot package from somewhere on xda(you'll find it).
Open command prompt "CD" to the directory where your fastboot is located in, put recovery image in the folder where fastboot.exe is and type "fastboot flash recovery <recovery file name>.IMG". I'm gonna update this answer in 2 days, when I get to my pc, so try to do it by these instructions, if something isn't working, comment and we'll resolve the problem. If something isn't clear, just ask. Keep me updated.
Sent from Lenovo a6000 1GB version.
Click to expand...
Click to collapse
Can unlocking my bootloader somehow brick my phone?
Everything can brick your phone. Updating my lenovo phone with official update hardbricked mine... But yeah, it can.