I have a Doogee DG100 and I changed the build,prop.
After that does not boot.
I have tried to change the permissions with ADB but I get an error after adb shell command "error:close".
I have tried to flash a new rom but I get an error from SP Flash Tool "BROM ERROR:S_NOT_ENOUGH_STORAGE_SPACE(1011)".
Can you please tell me what to do?
psild said:
I have a Doogee DG100 and I changed the build,prop.
After that does not boot.
I have tried to change the permissions with ADB but I get an error after adb shell command "error:close".
I have tried to flash a new rom but I get an error from SP Flash Tool "BROM ERROR:S_NOT_ENOUGH_STORAGE_SPACE(1011)".
Can you please tell me what to do?
Click to expand...
Click to collapse
did u repair that problem?
Hi I found the problem you must remove "fat.img" file from firmware folder and the firmware will be install without problems
Related
Hi all,
I'm trying for days to get my Umi X2 running again.
Momentarily I see the Umi screen, followed bij the start screen where it says android.
Then I see for a few seconds the menu where you can select the language and then reboots.
I tried using Shuame, SP Flash tool and MTK Droid Tools. Nothing seems to work.
Via ADB sideload I can push a package but this gets always aborted.
I used Shuame to push the CWM 6.0.3 recovery to the phone. It states that it worked, but when I reboot to Recovery I can only get to the Factory recovery. Here you can only update software instead of installaing complete zip images.
I read about a guy who had the somewaht same issue. He said that he fumbled around with Shuame and suddenly had a recovery menu of Shuame on his Device.
ADB shell works, but I can;t get to my SDCARD as it says no device found. When I run ADB Devices nothing returns.
I already tried adding my USB device to the ini-file of ADB, to no avail.
Can someone help me get my device running again.
Chucho72 said:
Hi all,
I'm trying for days to get my Umi X2 running again.
Momentarily I see the Umi screen, followed bij the start screen where it says android.
Then I see for a few seconds the menu where you can select the language and then reboots.
I tried using Shuame, SP Flash tool and MTK Droid Tools. Nothing seems to work.
Via ADB sideload I can push a package but this gets always aborted.
I used Shuame to push the CWM 6.0.3 recovery to the phone. It states that it worked, but when I reboot to Recovery I can only get to the Factory recovery. Here you can only update software instead of installaing complete zip images.
I read about a guy who had the somewaht same issue. He said that he fumbled around with Shuame and suddenly had a recovery menu of Shuame on his Device.
ADB shell works, but I can;t get to my SDCARD as it says no device found. When I run ADB Devices nothing returns.
I already tried adding my USB device to the ini-file of ADB, to no avail.
Can someone help me get my device running again.
Click to expand...
Click to collapse
Got it running.
If someone needs instructions, let me know.
err... did u reflash the partion part ?
Sent from my GT-S5360 using xda app-developers app
Ryanrioz said:
err... did u reflash the partion part ?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I used SP Flash Tool to reflash the recovery.img
More Details
I need more details on how did you use the flash tool to solve your problem? I have the same problem here. I need to know how to show (in sp flash tool) where is my downloaded .IMG file. Step by step
Chucho72 said:
Yeah, I used SP Flash Tool to reflash the recovery.img
Click to expand...
Click to collapse
Me Too
toninhocs said:
I need more details on how did you use the flash tool to solve your problem? I have the same problem here. I need to know how to show (in sp flash tool) where is my downloaded .IMG file. Step by step
Click to expand...
Click to collapse
Hi, I have the same problem (silly me), where did you get that recovery.img?
Any hints would be helpful
Thanks
TOM
My phone Micromax A44 is rooted.
how to fix the bootloop in it. I tried various methods in it,but all in vain.
IN CMD COMMAND
I tried fastboot but its keep on showing "waiting for device".
I have installed the drivers properly as when i type "adb devices " it shows "device attached is a44".
i also tried to reflash it by SP FLASH tool but it is not detecting my decvice .
kindly please help. ASAP.
camflauged said:
My phone Micromax A44 is rooted.
how to fix the bootloop in it. I tried various methods in it,but all in vain.
IN CMD COMMAND
I tried fastboot but its keep on showing "waiting for device".
I have installed the drivers properly as when i type "adb devices " it shows "device attached is a44".
i also tried to reflash it by SP FLASH tool but it is not detecting my decvice .
kindly please help. ASAP.
Click to expand...
Click to collapse
Sorry i was unavailable...
you will have to reflash entire stock rom using sp flash tool..
Hello,
I've bricked my rooted Alcatel onetouch pop 2 5042D after installing chainfire3d plug-ins. First, i try factory reset via
CWM but i get "(some thing with chineese) .android/secure.... " then my phone doesn't reboot. So i try a tutorial on this Forum using ADB, but when i type "adb shell" command, i get (~ #) instead of ($), then i type "Su" and i get this txt error "sh/sbin : su not found", so i can t get root access to uninstall CF3D.
PLEASE, Help me, my alcatel STUCK at logo,but i can turn it on recovery or fastboot mode.
HOW to fix this problem ? (and sorry for my bad english)
Hi, thank you for using XDA Assist. You need to flash your device's stock firmware. Unfortunately I can find very little about your device in XDA. I'm going to ask a moderator to move your post here,http://forum.xda-developers.com/android/help
Eliox-Zz said:
Hello,
I've bricked my rooted Alcatel onetouch pop 2 5042D after installing chainfire3d plug-ins. First, i try factory reset via
CWM but i get "(some thing with chineese) .android/secure.... " then my phone doesn't reboot. So i try a tutorial on this Forum using ADB, but when i type "adb shell" command, i get (~ #) instead of ($), then i type "Su" and i get this txt error "sh/sbin : su not found", so i can t get root access to uninstall CF3D.
PLEASE, Help me, my alcatel STUCK at logo,but i can turn it on recovery or fastboot mode.
HOW to fix this problem ? (and sorry for my bad english)
Click to expand...
Click to collapse
you need to download the mobile upgrade tool and restore the os
xdauser45 said:
you need to download the mobile upgrade tool and restore the os
Click to expand...
Click to collapse
Thanks, but you know how to do it for my phone's model ??
xdauser45 said:
you need to download the mobile upgrade tool and restore the os
Click to expand...
Click to collapse
If you can enter inside custom recovery, you can Restore rom.
I have a oneplus 7t pro. bootloader is unlocked, orangefox installed, I have tried many methods but none seem to work in regards to installing another rom and getting access to internal storage while on orangefox, I intend to install another rom on the phone, also tried adb method via orangefox and when I usae the command adb side load (filename.rar) it gives me this error: (~0%) * failed to read command:
it is so fustrating because I tried every possible method on the internet, but if anyone has any suggestions or solutions please feel free to inform me.
Do I need root in order to get access?
I also tried the guide from this forum: How to fix unable to mount data internal storage 0mb in twrp permanently : but no method worked, I get errors trying to change the file system type and repairing it, no proccess works, nothing WORKED, SO FUSTRATING!
help
update: tried on twrp and managed to transfer rom zip to it but when I tried installing it, I got these errrors:
system_root invalid arugement
vendor invalid argument
Be sure to check if you are loading the fastboot rom via fastboot or the recovery rom first
ValgarBaldr said:
Be sure to check if you are loading the fastboot rom via fastboot or the recovery rom first
Click to expand...
Click to collapse
What do you mean?
helpUrgently said:
can you explain to me in steps so I can follow?
Click to expand...
Click to collapse
Sorry, I was replying you but I think the best for you is telling me first what rom are you trying to flash and if you are able to log in the device normally
the only working method for me was to create a fastboot rom and install it via cmd with flashall.bat, no recovery os worked, I was almost there but idk how to create a flash all.bat file properly for the rom, im trying to install the pixel experience rom, these are the payload output files(they are in the correct descending order top to bottom)
oh I get it now, VIA FAST BOOT
Yeah you are getting it. Via fastboot you flash the recovery file and the rom so you have all in one. Look the installation guide for arrowos as the Devs usually explain all very closely
Hello, all I need is the correct flash-all.bat file for execution of the files, I couldnt flash the rom normally on fastboot, this is the only working meethod for me
ValgarBaldr said:
Yeah you are getting it. Via fastboot you flash the recovery file and the rom so you have all in one. Look the installation guide for arrowos as the Devs usually explain all very closely
Click to expand...
Click to collapse
I tried but I get errors trying to do it
Hi. My phone symphony W17 ( mt6572) is stuck on bootloop. I tried flashing stock rom using sp flash tool in format all + download mode. I tried clearing dalvik cache and data but no luck.
Firmware I flashed - https://www.mediafire.com/file/8csalmwtcxf0nme/Symphony_W17_V01.5_UP11.zip
SP flash tool version - 5.1516
Scatter - https://drive.google.com/file/d/12jhrdeM8bKjPU5Ej0KZVfEK4ZBg5DVzq/view?usp=sharing
Please help me
try fastboot format:ext4 userdata
aIecxs said:
try fastboot format:ext4 userdata
Click to expand...
Click to collapse
what to do after that ? should i try flashing phone again?
phone should boot again, or at least /data should be mountable. you can repeat for cache partition that is basically what factory reset does
aIecxs said:
phone should boot again, or at least /data should be mountable. you can repeat for cache partition that is basically what factory reset does
Click to expand...
Click to collapse
No. it cant get out of bootloop
I think its the end of my phone
you should figure out the reason for boot loop with adb logcat
for this you need to enable usb-debugging via modifying default.prop first.
check out this thread and come back with logcat
Bypass secure USB debugging prompt on phone with broken screen
aIecxs said:
you should figure out the reason for boot loop with adb logcat
for this you need to enable usb-debugging via modifying default.prop first.
check out this thread and come back with logcat
Bypass secure USB debugging prompt on phone with broken screen
Click to expand...
Click to collapse
I somehow flashed cwm recovery and connected my device to pc and i was trying to edit the default.prop and build.prop but i got these errors
Code:
E:\Downloads\platform-tools_r31.0.3-windows (1)\platform-tools>adb pull /data/property/persist.sys.usb.config
adb: error: remote object '/data/property/persist.sys.usb.config' does not exist
Code:
E:\Downloads\platform-tools_r31.0.3-windows (1)\platform-tools>adb pull /system/build.prop
adb: error: remote object '/system/build.prop' does not exist
.
Help
Code:
adb shell mount /system
adb pull /system/system/build.prop
or maybe
Code:
adb shell mount /system_root
adb pull /system_root/system/build.prop
aIecxs said:
Code:
adb shell mount /system
adb pull /system/system/build.prop
or maybe
Code:
adb shell mount /system_root
adb pull /system_root/system/build.prop
Click to expand...
Click to collapse
I have lost all hopes and i will save money for a new phone. Thanks for trying to help me
aIecxs said:
Code:
adb shell mount /system
adb pull /system/system/build.prop
or maybe
Code:
adb shell mount /system_root
adb pull /system_root/system/build.prop
Click to expand...
Click to collapse
Hey bro, after many days i flashed the same rom and it booted but im getting many errors such as apps crashing and also a wifi named "NVRAM WARNING ERR X10" is appearing. please help me. I somehow got into settings and enabled usb debuging
first you should recover NVRAM
How to use SN Write Tool to Write IMEI on MediaTek Devices
please capture logcat during boot for further debugging
Code:
adb logcat '*:W' -b all > logcat.txt
aIecxs said:
first you should recover NVRAM
How to use SN Write Tool to Write IMEI on MediaTek Devices
please capture logcat during boot for further debugging
Code:
adb logcat '*:W' -b all > logcat.txt
Click to expand...
Click to collapse
Im getting this error
Junaid433 said:
Hi. My phone symphony W17 ( mt6572) is stuck on bootloop. I tried flashing stock rom using sp flash tool in format all + download mode. I tried clearing dalvik cache and data but no luck.
Firmware I flashed - https://www.mediafire.com/file/8csalmwtcxf0nme/Symphony_W17_V01.5_UP11.zip
SP flash tool version - 5.1516
Scatter - https://drive.google.com/file/d/12jhrdeM8bKjPU5Ej0KZVfEK4ZBg5DVzq/view?usp=sharing
Please help me
Click to expand...
Click to collapse
Hi .
What did you use before installing Stoke ROM? For example, have you unlocked the phone bootloader or not?
Junaid433 said:
Hi. My phone symphony W17 ( mt6572) is stuck on bootloop. I tried flashing stock rom using sp flash tool in format all + download mode. I tried clearing dalvik cache and data but no luck.
Firmware I flashed - https://www.mediafire.com/file/8csalmwtcxf0nme/Symphony_W17_V01.5_UP11.zip
SP flash tool version - 5.1516
Scatter - https://drive.google.com/file/d/12jhrdeM8bKjPU5Ej0KZVfEK4ZBg5DVzq/view?usp=sharing
Please help HI again . perform a factory reset may solve this problem .
Click to expand...
Click to collapse
BYSOFT said:
Hi .
What did you use before installing Stoke ROM? For example, have you unlocked the phone bootloader or not?
Click to expand...
Click to collapse
bootloader is unlocked but sometime ago when i flashed this rom my phone was working fine and now when i flash this rom its stuck in bootloop. I found another rom for my phone and i flashed it and im getting errors like apps crashing and a wifi named nvram err x10
go to recovery mode and reset factory the phone may solve this problem .
BYSOFT said:
go to recovery mode and reset factory the phone and wipe the cache partition my solve this problem .
Click to expand...
Click to collapse
I even wiped data but no luck
@BYSOFT as mentioned in OP whole eMMC was erased by SP Flash Tool (format all + download)
important phone unique calibration data, bluetooth, mac address and IMEI are not included in stock ROM/firmware and must recovered manually (NVRAM and PERSIST partitions got lost forever)
aIecxs said:
@BYSOFT as mentioned in OP whole eMMC was erased by SP Flash Tool (format all + download)
important phone unique calibration data, bluetooth, mac address and IMEI are not included in stock ROM/firmware and must recovered manually (NVRAM and PERSIST partitions got lost forever)
Click to expand...
Click to collapse
Hi I flashed the rom , link is in the post and it booted and phone is working but its not detecting my sim cards help