I have Xperia E and it won't turn on, just stuck on green light. Anyone have solution for my problem? Thanks before.
iya said:
I have Xperia E and it won't turn on, just stuck on green light. Anyone have solution for my problem? Thanks before.
Click to expand...
Click to collapse
Try to connect it in flashmode via flashtool& flash stock ftf
Sent from my ST21i using Tapatalk
Take out the battery, put it in again, and turn it on. Unless you screwed your phone up so badly that tejasjani55's solution is required, you might try this.
tejasjani55 said:
Try to connect it in flashmode via flashtool& flash stock ftf
Sent from my ST21i using Tapatalk
Click to expand...
Click to collapse
I tried that but still stuck. When I turn on the phone it vibrate a second with green light blinking.
NSDCars5 said:
Take out the battery, put it in again, and turn it on. Unless you screwed your phone up so badly that tejasjani55's solution is required, you might try this.
Click to expand...
Click to collapse
I already tried that too, but still not working.
Not sure, but try this. Take out the battery, and hold the power button for ~5 seconds. Connect the phone to a PC. Flash the stock FTF. When it asks to press the back button, insert the battery (without removing the microUSB). The flash will begin. After the flash is complete, let the phone be for about half an hour, then remove the cable and turn it on.
iya said:
I tried that but still stuck. When I turn on the phone it vibrate a second with green light blinking.
I already tried that too, but still not working.
Click to expand...
Click to collapse
Bro ,describe in detail that what you have done before And error you are getting in flashtool.
Sent from my ST21i using Tapatalk
iya said:
I have Xperia E and it won't turn on, just stuck on green light. Anyone have solution for my problem? Thanks before.
Click to expand...
Click to collapse
Hi
I had this same problem a while ago, I am sorry to say your phone is bricked BUT FIXABLE
1. Take battery out of the phone.
2. Install all drivers needed.
3. Download Sony Update Service (Google it).
4.Open SUS and click Agree and next, select the Xperia E and hit next.
5. Put the battery in.
6. Now as instructed by SUS plug in the USB cable to the PC while holding the volume down key.
7. If you have done everything correctly, update service should detect your phone.
8. Click Install and follow instructions on screen.
THANK ME
Sent from my C1505 using Tapatalk
NSDCars5 said:
Not sure, but try this. Take out the battery, and hold the power button for ~5 seconds. Connect the phone to a PC. Flash the stock FTF. When it asks to press the back button, insert the battery (without removing the microUSB). The flash will begin. After the flash is complete, let the phone be for about half an hour, then remove the cable and turn it on.
Click to expand...
Click to collapse
Thanks fo giving me that solution, Bro. I will try that :good:
tejasjani55 said:
Bro ,describe in detail that what you have done before And error you are getting in flashtool.
Sent from my ST21i using Tapatalk
Click to expand...
Click to collapse
That's no error when I use flashtool to flash the stock ftf, Bro. Always success. But, when flashtool done flashing I remove my phone from pc and want to turn on the phone it stuck on green light led.
UltraGamerHD said:
Hi
I had this same problem a while ago, I am sorry to say your phone is bricked BUT FIXABLE
1. Take battery out of the phone.
2. Install all drivers needed.
3. Download Sony Update Service (Google it).
4.Open SUS and click Agree and next, select the Xperia E and hit next.
5. Put the battery in.
6. Now as instructed by SUS plug in the USB cable to the PC while holding the volume down key.
7. If you have done everything correctly, update service should detect your phone.
8. Click Install and follow instructions on screen.
THANK ME
Sent from my C1505 using Tapatalk
Click to expand...
Click to collapse
I will try that, Bro. Thanks before for try to helping me :good:
UltraGamerHD said:
Hi
I had this same problem a while ago, I am sorry to say your phone is bricked BUT FIXABLE
1. Take battery out of the phone.
2. Install all drivers needed.
3. Download Sony Update Service (Google it).
4.Open SUS and click Agree and next, select the Xperia E and hit next.
5. Put the battery in.
6. Now as instructed by SUS plug in the USB cable to the PC while holding the volume down key.
7. If you have done everything correctly, update service should detect your phone.
8. Click Install and follow instructions on screen.
THANK ME
Sent from my C1505 using Tapatalk
Click to expand...
Click to collapse
Still not working, Bro. Please help me everyone
iya said:
Still not working, Bro. Please help me everyone
Click to expand...
Click to collapse
Only other thing I could advice is that you should switch computer and follow my process, what exactly is wrong with my method?
UltraGamerHD said:
Only other thing I could advice is that you should switch computer and follow my process, what exactly is wrong with my method?
Click to expand...
Click to collapse
Okay, I'll try again later with other computer. Nothing wrong with your method, I follow your instructions step by step and when the process completed, I unplug the usb from my phone, exit from SUS, turn on the phone, and still vibrate a second with green light blinking. Now, I try use PC Companion, still progress. Or maybe something wrong with my hardware?
iya said:
Still not working, Bro. Please help me everyone
Click to expand...
Click to collapse
iya said:
Okay, I'll try again later with other computer. Nothing wrong with your method, I follow your instructions step by step and when the process completed, I unplug the usb from my phone, exit from SUS, turn on the phone, and still vibrate a second with green light blinking. Now, I try use PC Companion, still progress. Or maybe something wrong with my hardware?
Click to expand...
Click to collapse
If this is the case then it is bricked. Take it to the store and if your under warranty get it fixed for free. If not your only choice is to pay to get if fixed.
This also happened to me!
UltraGamerHD said:
If this is the case then it is bricked. Take it to the store and if your under warranty get it fixed for free. If not your only choice is to pay to get if fixed.
This also happened to me!
Click to expand...
Click to collapse
Yeah I think so, Bro. Thanks for trying to help me :good:
iya said:
I have Xperia E and it won't turn on, just stuck on green light. Anyone have solution for my problem? Thanks before.
Click to expand...
Click to collapse
First of all !
I think you might have a battery issue too !
First charge your battery fully !
Incase it isn't charging follow these steps :
- Pull out battery
- Plug in the charger and start charging
- After the charging LED turns on, insert the battery while pressing the back button and during this don't stop charging.
- Congo, now you have your phone charging.
Now, make sure you have an unlocked bootloader of your Phone to try the flashing things and if you already have it unlocked then try relocking it with Flashtool and apply for warranty ! or you can still flash your original stock firmware with locked bootloader too or use Sony Update Service.
You can check out this thread for the Sony Xperia E Single stock firmware and guide to get back into stock :
Link : http://forum.xda-developers.com/showthread.php?t=2568176
Or if you want your bootloader unlocked and want to fix the phone then try flashing the stock firmware of your device.
As mentioned by other members in the earlier posts.
JiMiTVAiDYA said:
First of all !
I think you might have a battery issue too !
First charge your battery fully !
Incase it isn't charging follow these steps :
- Pull out battery
- Plug in the charger and start charging
- After the charging LED turns on, insert the battery while pressing the back button and during this don't stop charging.
- Congo, now you have your phone charging.
Now, make sure you have an unlocked bootloader of your Phone to try the flashing things and if you already have it unlocked then try relocking it with Flashtool and apply for warranty ! or you can still flash your original stock firmware with locked bootloader too or use Sony Update Service.
You can check out this thread for the Sony Xperia E Single stock firmware and guide to get back into stock :
Link : http://forum.xda-developers.com/showthread.php?t=2568176
Or if you want your bootloader unlocked and want to fix the phone then try flashing the stock firmware of your device.
As mentioned by other members in the earlier posts.
Click to expand...
Click to collapse
Okay, I'll try bro. And give you the result :good:
iya said:
Okay, I'll try bro. And give you the result :good:
Click to expand...
Click to collapse
Any progress?
Sent by magic!
MatsPunt said:
Any progress?
Sent by magic!
Click to expand...
Click to collapse
Still bricked, Bro
Hmm. Do you still have warranty left? Reading this thread, and assuming you have tried everything, I see no other option that returning it to the shop(if you still have warranty). Sorry, man. Perhaps a smarter person than me could help, but I don't see any other solution. Sorry, man.
Goodluck!
Sent by magic!
I KNOW!
Something similar happenned to xperia j and i fixed it like this.
My Problem: http://forum.xda-developers.com/showthread.php?t=2376753&page=3
my solution: is attached
attached
attached
Related
Hi guys,
yesterday I put evoking (android 4.2.1) on my phone, and I wanted to change it, so I've installed ROM Manager..
After that, I've rebooted on recovery, but, the phone shows only the lg's icon..
So I tried to unbrick this whit KDZ (using this guide http://forum.xda-developers.com/showthread.php?t=883314) and, I tried all the possibility, but it still not working. Now, it does not turn on!! Can you help me please?
P.S. Sorry for the english I'm using google translate..
remove battery, plug the phone to computer while pressing vol up and power to see if computer recognize it, if it does, flash again via kdz
after reflash, restart and w8 for the phone to boot, it will take some minutes to boot, just be patient
grigtm said:
remove battery, plug the phone to computer while pressing vol up and power to see if computer recognize it, if it does, flash again via kdz
after reflash, restart and w8 for the phone to boot, it will take some minutes to boot, just be patient
Click to expand...
Click to collapse
And if the computer don't recognize it?
that will not be good, maybe hardbrick
grigtm said:
that will not be good, maybe hardbrick
Click to expand...
Click to collapse
and there isn't any solution?
sao_95 said:
Hi guys,
yesterday I put evoking (android 4.2.1) on my phone, and I wanted to change it, so I've installed ROM Manager..
After that, I've rebooted on recovery, but, the phone shows only the lg's icon..
So I tried to unbrick this whit KDZ (using this guide http://forum.xda-developers.com/showthread.php?t=883314) and, I tried all the possibility, but it still not working. Now, it does not turn on!! Can you help me please?
P.S. Sorry for the english I'm using google translate..
Click to expand...
Click to collapse
Hey bud,
its simeple.
even i faced the same issue once. Just reboot the mobile and while booting go to the recovery mode (home+vol up + powerbutton). tere u can reinstall the rom. try ICy/PAC MAN. it works beautifully. remember to keep this rom zip file in SD card while rebooting.
skanth said:
Hey bud,
its simeple.
even i faced the same issue once. Just reboot the mobile and while booting go to the recovery mode (home+vol up + powerbutton). tere u can reinstall the rom. try ICy/PAC MAN. it works beautifully. remember to keep this rom zip file in SD card while rebooting.
Click to expand...
Click to collapse
I know, but my phone don't turn on!!
sao_95 said:
I know, but my phone don't turn on!!
Click to expand...
Click to collapse
OMG, u should ve done this step before KDZ's steps. things were simpler. Its time to take to the store i guess.
arlways areenadd
skanth said:
OMG, u should ve done this step before KDZ's steps. things were simpler. Its time to take to the store i guess.
Click to expand...
Click to collapse
I ve done this step..
sao_95 said:
I ve done this step..
Click to expand...
Click to collapse
If you removed the battery after unsuccessful kdz flash, then your phone is hard bricked and you need to go to LG
Sent from my LG-P500 using Tapatalk 2
I just tried installing the Energy Rom from forum.xda-developers.com/showthread.php?t=2010108 and after I installed the Energy_JB_4.2.1_Partitions.zip file and rebooted I received the asus logo screen and then my tablet just went off. I tried rebooting into TWRP to continue installing the rom and just got a black screen. THAT'S ALL I GET NOW IS BSOD. I've tried holding down the the volume+power, just power, sticking a pin in the reset hole. NOTHING!!! However my light by the power button still lights up orange or green when charging.
IS THERE ANYWAY I CAN GET OUT OF THIS MESS??? I don't care if I have to wipe everything from the tablet. Just as long as I can get this thing to boot again in anyway would make me happy! :crying:
I would ask NRG as he was the one who created this zip. He will know more about it and its bugs/issues. Post in the energy thread if you haven't already.
Sent from my Nexus 7 using xda app-developers app
Take the back off, take the heatsink/metal plate off the device (WARNING THIS WILL VOID YOUR WARRANTY!!!!) Find the black cable with a white connector, disconnect it and connect it again.
CorkedA said:
Take the back off, take the heatsink/metal plate off the device (WARNING THIS WILL VOID YOUR WARRANTY!!!!) Find the black cable with a white connector, disconnect it and connect it again.
Click to expand...
Click to collapse
NOTHING!!!
When you have installed Energy, have you used offical 4.2.1 JB from Asus?
Hazard17 said:
When you have installed Energy, have you used offical 4.2.1 JB from Asus?
Click to expand...
Click to collapse
The more I think about it.... I think no. I was on Energy 12/22 which was 4.1.1 and then started the install of files. I installed the first one which was a 14MB partition file, it rebooted, I got the logo and then it shut off. The light still comes on though when I plug in the charger and changes from orange to green. But if I hold the power, power+volume, reset hole or anything else... Nothing happens.
Your tablet is unrecoverable bricked! You make misteak, because you should first install offical Asus JB 4.2.1 OTA via Fastboot.
Gogeta5026 said:
The more I think about it.... I think no. I was on Energy 12/22 which was 4.1.1 and then started the install of files. I installed the first one which was a 14MB partition file, it rebooted, I got the logo and then it shut off. The light still comes on though when I plug in the charger and changes from orange to green. But if I hold the power, power+volume, reset hole or anything else... Nothing happens.
Click to expand...
Click to collapse
Look at my signature and go to the link for getting into the bootloader menu. Don't worry with apx, just the info for the bootloader.
Good Luck!
tobdaryl said:
Look at my signature and go to the link for getting into the bootloader menu. Don't worry with apx, just the info for the bootloader.
Good Luck!
Click to expand...
Click to collapse
Thank you. I'll try it when I get home tonight from work!!!
Gogeta5026 said:
Thank you. I'll try it when I get home tonight from work!!!
Click to expand...
Click to collapse
Good Luck!
tobdaryl said:
Good Luck!
Click to expand...
Click to collapse
NO LUCK!!!
Not sure if this will help
If when you flashed this zip, and the 4.2.1 bootloader did manage to take I would try this.
Connect your device to your pc with the usb cable and power on like you would when normally trying to boot into bootloader (vol- & power)
Even though the screen is black if the bootloader did take then fastboot will be automatically running here.
Open command prompt (run as admin) and cd to your android-sdk\platform-tools folder and try command
Code:
fastboot devices
and see if you get a response.
If you do get a list with your s/n, then I would give my how-to a go & see if that works.
I'll try that tonight or tomorrow. I was going to try to find an identical one today at Best Buy and then return the screwed up one a few days later. But if I can save my original I'll just keep it and not go through all the hassle.
Sent from my LG-P930 using xda premium
Hi,
some days ago I connected my Tipo to the charger before going to sleep. When I woke up it was turned off. I removed the battery then I put it back but still it didn't power on.
Sometimes, when I tried to power it on, it vibrated (as it usually does when I power it on) or there is the red led (like if the battery is discharged). It never powers on, neither with the charger.
I tried another battery (a friend has the same smartphone), but nothing changed.
Did someone have the same problem and solved it?
Pls reflash you Rom with flashtool bro and corret ftf file....
Sent from my ST21i
vinoth3342 said:
Pls reflash you Rom with flashtool bro and corret ftf file....
Sent from my ST21i
Click to expand...
Click to collapse
As soon as I can use a PC with win7, I'll try. At the moment I have windows8 and I don't find the proper drivers.
But maybe I can't solve the problem. I tried the fastboot mode and it doens't work.
Ok, I tried but it doesn't work. I can't use the fastboot mode.
I guess I'm going to bring it to a repair center.
skawise said:
Ok, I tried but it doesn't work. I can't use the fastboot mode.
I guess I'm going to bring it to a repair center.
Click to expand...
Click to collapse
It's a dead phone, much people had those issues, for no reason.
Ketcchup said:
It's a dead phone
Click to expand...
Click to collapse
That's my opinion too.
But the phone deserve a try.
Hey!
Recently, I installed Cyanogenmod 11 for my Xperia J but this ROM didn't work great for me as SIM and Camera are the most essentials of the phone and they were not working.
So I decided to revert to my stock android firmware. I downloaded the firmware and flashed it by using Xperia flash tool.
But now (after successful flashing) when I press the power button, a red light on the phone flashes 3 to 4 times and then it goes off and nothing comes up on the screen. And when I put my phone on charging, it just turns up the green light which is known for flashmode.
Please help. I couldn't find the thread related to mine so I posted the new thread. And sorry for my English.
Thanks,
Abdul Hanan
abhanan93 said:
Hey!
Recently, I installed Cyanogenmod 11 for my Xperia J but this ROM didn't work great for me as SIM and Camera are the most essentials of the phone and they were not working.
So I decided to revert to my stock android firmware. I downloaded the firmware and flashed it by using Xperia flash tool.
But now (after successful flashing) when I press the power button, a red light on the phone flashes 3 to 4 times and then it goes off and nothing comes up on the screen. And when I put my phone on charging, it just turns up the green light which is known for flashmode.
Please help. I couldn't find the thread related to mine so I posted the new thread. And sorry for my English.
Thanks,
Abdul Hanan
Click to expand...
Click to collapse
Re flash ftf... Cause it may be broken or not for ur device
DastanShaikh said:
Re flash ftf... Cause it may be broken or not for ur device
Click to expand...
Click to collapse
Tried it. Still the same.
All right! Thanks for looking out this thread. Problem is solved now.
The battery was completely dead. Therefore, I first charged it with Universal charger and then put it in phone. The phone is working fine now.
Thanks,
Abdul Hanan
abhanan93 said:
All right! Thanks for looking out this thread. Problem is solved now.
The battery was completely dead. Therefore, I first charged it with Universal charger and then put it in phone. The phone is working fine now.
Thanks,
Abdul Hanan
Click to expand...
Click to collapse
Good to heAr.. That ur problem is solved
Every time I try it (no batt, up on vol) I get a missing battery sign.
When I try to do it with the battery and plugged in it shows up and I can assign ports but flashtool cannot see it!
Any ideas?
Do you have latest drivers installed?if not install them first.and always keep better in when flashing.
ComradeZ said:
Every time I try it (no batt, up on vol) I get a missing battery sign.
When I try to do it with the battery and plugged in it shows up and I can assign ports but flashtool cannot see it!
Any ideas?
Click to expand...
Click to collapse
It's not really supposed to work with the battery out of the phone anyway.
You are using a USB 2.0 correct? USB 3.0 will not work.
What do you mean flashtool won't see it?
Your selecting the tot file clicking the yellow button and when it says ready you've unplugged and re plugged the device?
Sent from my iPhone using Tapatalk
I'm using 2.0 usb.
How exactly do I get to download mode with battery in it?
Flashtool never gets a yellow go color. It just sits there. When I click go, it fails out.
hyelton said:
It's not really supposed to work with the battery out of the phone anyway.
You are using a USB 2.0 correct? USB 3.0 will not work.
What do you mean flashtool won't see it?
Your selecting the tot file clicking the yellow button and when it says ready you've unplugged and re plugged the device?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Post the screenshots of what you are doing.
Jahanzaibawan said:
Post the screenshots of what you are doing.
Click to expand...
Click to collapse
Nevermind, got a new battery and I was able to go back to stock kitkat just fine. Now problem of getting no OTAs
ComradeZ said:
Nevermind, got a new battery and I was able to go back to stock kitkat just fine. Now problem of getting no OTAs
Click to expand...
Click to collapse
If you don't have at&t sim,you will never recieve updates ota.
Does it need to be activated or can it be just the sim and no plan on it?
ComradeZ said:
Does it need to be activated or can it be just the sim and no plan on it?
Click to expand...
Click to collapse
It must be activated and functional.