I just tried installing the Energy Rom from forum.xda-developers.com/showthread.php?t=2010108 and after I installed the Energy_JB_4.2.1_Partitions.zip file and rebooted I received the asus logo screen and then my tablet just went off. I tried rebooting into TWRP to continue installing the rom and just got a black screen. THAT'S ALL I GET NOW IS BSOD. I've tried holding down the the volume+power, just power, sticking a pin in the reset hole. NOTHING!!! However my light by the power button still lights up orange or green when charging.
IS THERE ANYWAY I CAN GET OUT OF THIS MESS??? I don't care if I have to wipe everything from the tablet. Just as long as I can get this thing to boot again in anyway would make me happy! :crying:
I would ask NRG as he was the one who created this zip. He will know more about it and its bugs/issues. Post in the energy thread if you haven't already.
Sent from my Nexus 7 using xda app-developers app
Take the back off, take the heatsink/metal plate off the device (WARNING THIS WILL VOID YOUR WARRANTY!!!!) Find the black cable with a white connector, disconnect it and connect it again.
CorkedA said:
Take the back off, take the heatsink/metal plate off the device (WARNING THIS WILL VOID YOUR WARRANTY!!!!) Find the black cable with a white connector, disconnect it and connect it again.
Click to expand...
Click to collapse
NOTHING!!!
When you have installed Energy, have you used offical 4.2.1 JB from Asus?
Hazard17 said:
When you have installed Energy, have you used offical 4.2.1 JB from Asus?
Click to expand...
Click to collapse
The more I think about it.... I think no. I was on Energy 12/22 which was 4.1.1 and then started the install of files. I installed the first one which was a 14MB partition file, it rebooted, I got the logo and then it shut off. The light still comes on though when I plug in the charger and changes from orange to green. But if I hold the power, power+volume, reset hole or anything else... Nothing happens.
Your tablet is unrecoverable bricked! You make misteak, because you should first install offical Asus JB 4.2.1 OTA via Fastboot.
Gogeta5026 said:
The more I think about it.... I think no. I was on Energy 12/22 which was 4.1.1 and then started the install of files. I installed the first one which was a 14MB partition file, it rebooted, I got the logo and then it shut off. The light still comes on though when I plug in the charger and changes from orange to green. But if I hold the power, power+volume, reset hole or anything else... Nothing happens.
Click to expand...
Click to collapse
Look at my signature and go to the link for getting into the bootloader menu. Don't worry with apx, just the info for the bootloader.
Good Luck!
tobdaryl said:
Look at my signature and go to the link for getting into the bootloader menu. Don't worry with apx, just the info for the bootloader.
Good Luck!
Click to expand...
Click to collapse
Thank you. I'll try it when I get home tonight from work!!!
Gogeta5026 said:
Thank you. I'll try it when I get home tonight from work!!!
Click to expand...
Click to collapse
Good Luck!
tobdaryl said:
Good Luck!
Click to expand...
Click to collapse
NO LUCK!!!
Not sure if this will help
If when you flashed this zip, and the 4.2.1 bootloader did manage to take I would try this.
Connect your device to your pc with the usb cable and power on like you would when normally trying to boot into bootloader (vol- & power)
Even though the screen is black if the bootloader did take then fastboot will be automatically running here.
Open command prompt (run as admin) and cd to your android-sdk\platform-tools folder and try command
Code:
fastboot devices
and see if you get a response.
If you do get a list with your s/n, then I would give my how-to a go & see if that works.
I'll try that tonight or tomorrow. I was going to try to find an identical one today at Best Buy and then return the screwed up one a few days later. But if I can save my original I'll just keep it and not go through all the hassle.
Sent from my LG-P930 using xda premium
Related
I was updating to froyo using the Odin installer and for some reason it stalled. I waited 10 minutes and nothing happened, it was stuck on DO NOT TURN OFF TARGET!! aaand being the genius that I am reset the Odin installer and phone...now I get nothing. The phone is completely unresponsive, no ! screen or anything.
Am I screwed?
edit: sorry for posting this in the wrong forum, please move to Q&A if a mod gets a chance.
close EVERYTHING, take everything out of your phone (sim, battery, and sd card.) then put the battery in but DONT TURN IT ON. have your usb cable ready. hold the two volume buttons down, and then plug in your usb cable to the phone (it should be plugged into your comp) WITHOUT PRESSING ANY POWER BUTTONS. if you get back into downloader mode, you are fine and can then restore using odin or the i click restore
hmmm, well try this take out the battery sim card and ex sd if u got one, open odin, put the battery back in and plug the usb in while holdin the volume buttons, aka download mode... sometimes it doesnt work the first time just try it a couple more...
I did this with my phone. If nothing comes on screen when you plug in the USB cable and entering recovery and download mode don't work, then take thye phone back to AT&T, they accepted my bricked phone back. Just act dumb like you have no clue why it's broken.
I have a similar issue, however I can still get into the downloader..but it just hangs when restoring on factoryfs.rfs....
Any suggestions on that?
hazard96 said:
close EVERYTHING, take everything out of your phone (sim, battery, and sd card.) then put the battery in but DONT TURN IT ON. have your usb cable ready. hold the two volume buttons down, and then plug in your usb cable to the phone (it should be plugged into your comp) WITHOUT PRESSING ANY POWER BUTTONS. if you get back into downloader mode, you are fine and can then restore using odin or the i click restore
Click to expand...
Click to collapse
I cannot explain how much you have just helped me at this moment. I did NOT expect this to work at all, and it did.
thank you, thank you THANK YOU truly
haha well seeing as you're new...
Welcome to the warm hearts at xda-developers
Have I mentioned how good it feels to see resolvable brick threads after the JH7 OTA disaster?
texasryno said:
I have a similar issue, however I can still get into the downloader..but it just hangs when restoring on factoryfs.rfs....
Any suggestions on that?
Click to expand...
Click to collapse
This happened to me as well, is there anything I can do?
jonttu said:
This happened to me as well, is there anything I can do?
Click to expand...
Click to collapse
Try a computer reboot / different USB port... sometimes USB gets interrupted when its flashing in big files like the factory.rfs
Zilch25 said:
Try a computer reboot / different USB port... sometimes USB gets interrupted when its flashing in big files like the factory.rfs
Click to expand...
Click to collapse
Thank you, had to switch the usb to one that was directly on the board, again much gratitude
It seems my phone is fully bricked, I tryed the download method with taking out everything. Nothing turns on, its completley blackscreened. I did have it working, but now its completley unresponsive.
mrbloog said:
It seems my phone is fully bricked, I tryed the download method with taking out everything. Nothing turns on, its completley blackscreened. I did have it working, but now its completley unresponsive.
Click to expand...
Click to collapse
Are you doing the method where you remove the battery first, hold the volume buttons (without power) and plug into USB? That *SHOULD* get you into download mode- if not, maybe check a different USB port.
Up and running, with Froyo to boot! Thanks again and good luck to those with problems. Thanks for the welcome again and I've made a donation in the site for saving my ass $500
HELP please HELP !!
I upgrade to Froyo and then wanted to go back to 2.1. The problem now I can only boot into download mode, but I tried to load other roms (one click, odin i9000 and Froy) and nothing happens! need help please!
dude, i love you for this.
monkas said:
I upgrade to Froyo and then wanted to go back to 2.1. The problem now I can only boot into download mode, but I tried to load other roms (one click, odin i9000 and Froy) and nothing happens! need help please!
Click to expand...
Click to collapse
Can you clarify? Did you successfully upgrade to froyo or incur and error somewhere in the process. When you say that "nothing happens" what exactly does that mean?
What does ODIN show when you try to upload?
vsboxerboy1 said:
Can you clarify? Did you successfully upgrade to froyo or incur and error somewhere in the process. When you say that "nothing happens" what exactly does that mean?
What does ODIN show when you try to upload?
Click to expand...
Click to collapse
Upgrade to Froyo successfully. Want to go back to 2.1 after using One Click Odin JF6 rom, it never ends. Following on from here, probe with OCD Froyo, eclair, odin and any rom could do to finish flashing. He stays in zImage and shows the status bar.
Any idea I can try?
monkas said:
Upgrade to Froyo successfully. Want to go back to 2.1 after using One Click Odin JF6 rom, it never ends. Following on from here, probe with OCD Froyo, eclair, odin and any rom could do to finish flashing. He stays in zImage and shows the status bar.
Any idea I can try?
Click to expand...
Click to collapse
This may seem elementary but I noticed your tag says your location says Buenos Aires. Are you sure you have a Captivate and not an i9000?
JOe K. said:
This may seem elementary but I noticed your tag says your location says Buenos Aires. Are you sure you have a Captivate and not an i9000?
Click to expand...
Click to collapse
Guys, good news! I recovered the phone and install Froyo. My error was that it came to how to download and then disconnect the USB and reconnected.
Joe K Captivate works perfect in Argentina because it uses the same bands as AT & T, send me a friend who lives in NYC, obviously unlocked.
Thank you all for your concern, I return to live!
Hi,
One day I was having fun with my brand new TF101 trying to root it and flash a rom...
I did a MASSIVE FAIL and now I get the asus logo when I turn it on and it only turns off when it has low battery . I can however acces the XPA mode (but useless, NVFLash doesn't work on B70+) and I can get into wipe mode and cold-booting. I tried both but the transformer just freezes . I wonder if one of you guys can tell me if I just have a 399€ paper weight mad or if it can be a tablet again D)?
Thanks,
HorClok
What were the exact steps you did to root and flash ?
Did you install CWM Recovery ?
Power off the TF by holding Power for a while until it turns off, then
Try holding Volume Down + Power until white text appears onscreen, then either choose Recovery or Wipe Data
*Detection* said:
What were the exact steps you did to root and flash ?
Click to expand...
Click to collapse
Can't remember, I think I downgraded then used razorclaw.
*Detection* said:
Did you install CWM Recovery ?
Click to expand...
Click to collapse
Wish I had...
*Detection* said:
Power off the TF by holding Power for a while until it turns off, then
Try holding Volume Down + Power until white text appears onscreen, then either choose Recovery or Wipe Data
Click to expand...
Click to collapse
All i get is wipe Data or cold booting Android... :/ I don't have a recovery mode on this tablet (it's a WW)
after the words appear, you have to push vol up within 5 sec to get into recovry.
If you wait after 5 sec. you'll only get the clear data or boot options.
Sent from my Transformer TF101 using Tapatalk
I think he has nearly the same problem like me.
i also cant get into recovery. but now its enough for me.
I will RMA it tomorrow. i also highly doubt that new SBK-Codes will ever be leaked/cracked.
There was nothing for month now.
Good Luck for you, but i guess only Asus can Flash it back with there "secret-Flash tool" or whatever, which we unfortunately don't have!
Horclok said:
Hi,
One day I was having fun with my brand new TF101 trying to root it and flash a rom...
I did a MASSIVE FAIL and now I get the asus logo when I turn it on and it only turns off when it has low battery . I can however acces the XPA mode (but useless, NVFLash doesn't work on B70+) and I can get into wipe mode and cold-booting. I tried both but the transformer just freezes . I wonder if one of you guys can tell me if I just have a 399€ paper weight mad or if it can be a tablet again D)?
Thanks,
HorClok
Click to expand...
Click to collapse
Maybe you can try to use the rom from the asus support site, put it on the external card and look if it will take the "update" ?
You have to unzip the downloaded zip file once. So you get a ASUS dir on the card. I think not unzipping further down.
Or try to play around with the unzipped file like is done here (even in that thread it is an OTA update and not a complete rom).
Just some idea's, didn't try it myself.
If it has access to fastboot...can't he just use the fastboot command to flash the system and boot images?
Where can i find this fastboot, and how get it to work?
Not all hope is lost - I did the exact same thing to my B70 trying to install CWM on it (then found out what a B70 was...). I managed to recover it using ASUS built-in recovery kernel.
The catch is that it seems the recovery kernel will only install a newer firmware - not the current or an older one. If you were still on the older (pre-Christmas firmware) maybe you can use that one right away, otherwise ICS is right on the horizon. If you don't know which you were on, it doesn't hurt to try anyway.
Here's what I did:
1. Stash the transformer under my bed for a month so I couldn't see it laughing at me while waiting for an update.
2. Once there is a newer firmware than the one you currently have, download it from ASUS (sorry I can't post the URL because I'm too new, it's pretty easy to find though)
2. Unzip the downloaded package
3. Find the zip file under ASUS/Update, copy it to an external Micro SD Card and rename it to TF101_SDUPATE.ZIP
4. Insert the sd card into the transformer, then resart it while holding the volume down button (if, like mine, the transformer won't stay off, that's fine - hold down the power key until it turns off, then hold the volume down as it starts back up)
5. When you see the white text in the top left corner, press volume up to enter the RCK.
6. Cross your fingers
If it works in a minute or two you should see a progress bar start up. If it doesn't you will see an android with an exclamation mark in a yellow triangle on it's chest.
If it doesn't work, don't despair - it might be the firmware you are using is too close to the existing one on the tablet. Wait for the next release and try again. It took me a month of waiting, but I finally got mine back.
hmm but you where always been able to access the Recovery, so that you can the Androidman with yellow triangle or?
On my Pad, if i press vol-up it shortly shows "booting recovery Kernel", and than screen gets black and instantly reboots.
You had the same behaviour?
knopper84 said:
hmm but you where always been able to access the Recovery, so that you can the Androidman with yellow triangle or?
On my Pad, if i press vol-up it shortly shows "booting recovery Kernel", and than screen gets black and instantly reboots.
You had the same behaviour?
Click to expand...
Click to collapse
Unfortunately it seems yours might be even more hosed than mine was then - I could always access the android with the yellow triangle. The recovery/wipe/cold boot screens were always available, it would just hang at the ASUS screen on boot, always restart when turned off
First of all, thanks for responding everyone.
If it has access to fastboot...can't he just use the fastboot command to flash the system and boot images?
Click to expand...
Click to collapse
I have to remember you that NVFlash does not work on Asus B70+.
The catch is that it seems the recovery kernel will only install a newer firmware - not the current or an older one. If you were still on the older (pre-Christmas firmware) maybe you can use that one right away, otherwise ICS is right on the horizon. If you don't know which you were on, it doesn't hurt to try anyway.
Click to expand...
Click to collapse
I'm on the 8.6.5.19, so I can try with the 8.6.5.21 and that's what i'm doing right now.
it would just hang at the ASUS screen on boot, always restart when turned off
Click to expand...
Click to collapse
have the exact same problem. I'm trying your method right now, i'll edit to tell you
EDIT: Tried the SD101_UPDATE.zip method, it didn't work, my firmware isin't old enough. I'll just wait for another update or ICS. Thanks anyway!
Horclok said:
EDIT: Tried the SD101_UPDATE.zip method, it didn't work, my firmware isin't old enough. I'll just wait for another update or ICS. Thanks anyway!
Click to expand...
Click to collapse
Just to double-check - did you use the name TF101_SDUPATE.zip? I'm not sure if your above name was a typo after a long day of debugging
Good luck - I had pretty much given up hope after bricking mine, but did get it back. Hope your recovery efforts go as smoothly!
hmm, TF101_SDUPATE.zip ?
i thought all times "EP101_SDUPDATE.zip" ?
So what is the right name?
knopper84 said:
hmm, TF101_SDUPATE.zip ?
i thought all times "EP101_SDUPDATE.zip" ?
So what is the right name?
Click to expand...
Click to collapse
Now I'm wishing I had taken better notes when I did it.
I'm 90% sure I ended up using TF101_SDUPDATE.zip, because I was surprised too - I had previously seen EP101...
It certainly doesn't hurt to try both. It's also possible that the current firmware recognizes a couple of names.
[EDIT]
Looking at my terminal history, it looks like TF101... was an earlier failed attempt, and I did use EP101_SDUPATE.zip
If you haven't try it with the name EP101_SDUPATE.zip and see if it works any better!
stcanard said:
[EDIT]
Looking at my terminal history, it looks like TF101... was an earlier failed attempt, and I did use EP101_SDUPATE.zip
If you haven't try it with the name EP101_SDUPATE.zip and see if it works any better!
Click to expand...
Click to collapse
Yeah I did use TF101_SDUPDATE.zip, I'll try EP101_SDUPDATE.zip this evening. Really hope it will work. Anyway ICS is on the way! (Do you guys know when it's gonna be on the tf101? )
Might be worth having a read of http://forum.xda-developers.com/showthread.php?t=1417006??!!
Horclok said:
Yeah I did use TF101_SDUPDATE.zip, I'll try EP101_SDUPDATE.zip this evening. Really hope it will work. Anyway ICS is on the way! (Do you guys know when it's gonna be on the tf101? )
Click to expand...
Click to collapse
Make sure your microsd is FAT32, not FAT.
ICS is in february.
[EDIT]
Looking at my terminal history, it looks like TF101... was an earlier failed attempt, and I did use EP101_SDUPATE.zip
If you haven't try it with the name EP101_SDUPATE.zip and see if it works any better!
Click to expand...
Click to collapse
Just tried with EP101_SDUPDATE.zip and it doesn't work either. Now trying pjfriend's solution.
pjfriend said:
Might be worth having a read of http://forum.xda-developers.com/showthread.php?t=1417006??!!
Click to expand...
Click to collapse
Just tried it, doesn't work either. I'll just wait for ICS and hope it will work when I get there... Thanks to all anyway!
I've tried to search but cannot find a solution. I had Hellfire ICS running on my G2X and today while trying to access the weather it froze. I pulled the battery and now it will not power back on. I can connect it to the computer and I can hear it connect but I cannot reload nvflash. It gets stuck trying to initialize bootloader. I've pulled the battery and tried everything that has been mentioned but no luck. Any help is appreciated.
G2X Will Not Power On.. answer
Just had the same problem your phone is probably toast .Find the file G2X_V21E_00_NVFlash ,download,unzip,unplug battery,plug in usb click on flash.bat . Make sure you have Nvidia usb drivers installed and make sure you use a fresh rebooted pc. Also persistance maybe necessary It may take 1 attempt or a dozen. Once it flashs the stock system and boots up if it freezes again send it back .
This procedure returns the phone to unrooted factory stock Good luck
I've called T-Mobile and they are sending me another G2X.... Still trying to get this one working. I don't like being beat.
Dishfsm1 said:
I've called T-Mobile and they are sending me another G2X.... Still trying to get this one working. I don't like being beat.
Click to expand...
Click to collapse
Did you overclock? if so what was the Mhz
Never overclocked
Dishfsm1 said:
Never overclocked
Click to expand...
Click to collapse
Do you hear it connect or see it? Open device manager and verify that it shows as some nvidia device (boot something) under usb before applying nvflash.
Sent from my LG-P999 using XDA
It does connect as APX while connecting it to usb but will not turn on. I will say that after repeatedly trying to install the stock flash as jdakk1982 had suggested it finally went to the boot screen but froze half way through. Now when I connect it to usb whether i'm holding the volume buttons or not it will connect as APX but I cannot get it to power on in apx mode again.
Dishfsm1 said:
It does connect as APX while connecting it to usb but will not turn on. I will say that after repeatedly trying to install the stock flash as jdakk1982 had suggested it finally went to the boot screen but froze half way through. Now when I connect it to usb whether i'm holding the volume buttons or not it will connect as APX but I cannot get it to power on in apx mode again.
Click to expand...
Click to collapse
Can you please try this and report if it fixes the issue our not?
http://forum.xda-developers.com/showthread.php?t=1590523
This is as close to a new phone as it gets
Sent from my LG-P999 using XDA
I am downloading now and will report back.
Still stuck at waiting foe bootloader to initialize
Dishfsm1 said:
I am downloading now and will report back.
Still stuck at waiting foe bootloader to initialize
Click to expand...
Click to collapse
Assuming this was done with battery out. Can you try with everything removed (battery, sim, sd card) and see if it works? If it does not I am afraid you may have a brick .
Boot loader should initialize... unfortunately this is a must step (but you probably already know that).
Sent from my LG-P999 using XDA
Yea.... I Know.... I will have my new g2x on Monday
I have the same problem
I have same problem as OP but I did overclock to 1.4 Ghz - I had just flashed the T15 kernel and was running quadrant when the phone froze. Did a battery pull and nothing. Will not boot, will not turn on. Guess its probably toast but any ideas of what I could try?
I had to get a new phone... I did notice that the battery was completely dead but it still would not turn back on. I replaced it with t-mobile.
Dishfsm1 said:
Yea.... I Know.... I will have my new g2x on Monday
Click to expand...
Click to collapse
If you still have your phone with you and you are able to connect the phone to PC without your battery try this:
http://forum.xda-developers.com/showthread.php?t=1248644
Please let me know if works. Good luck
Got it working...
Thanks for the link ratza (I bookmarked it) but I did get it up and running. It would not power on for almost 24 hrs and I could not connect it to PC. With battery out and plugged in PC did not see it.
It took a different battery to get it to boot. Even after that I could not get into Clockwork recovery either from the app or by holding down power / down buttons. I tried about a 2 dozen times. It took an older SD card that had a nandroid backup that finally worked.
cdtofer said:
Thanks for the link ratza (I bookmarked it) but I did get it up and running. It would not power on for almost 24 hrs and I could not connect it to PC. With battery out and plugged in PC did not see it.
It took a different battery to get it to boot. Even after that I could not get into Clockwork recovery either from the app or by holding down power / down buttons. I tried about a 2 dozen times. It took an older SD card that had a nandroid backup that finally worked.
Click to expand...
Click to collapse
Good to hear that you are up and running again
Just happened to me
This same thing just happened to me no more than two hours ago. After searching through the net I found that there was really nothing I can do because I do not own a computer. So after giving up hope because no one has posted anything recently I decided to just bull**** with the phone. I took the battery out sim and SD card. Plugged USB cord into USB wall mount charger plugged it into the phone without battery held down the power and vol- button all of a suddon LG screen flashes turns off. I quickly put battery in left it plugged in pushed same two buttons and it came to life. Hopefully thus helps anyone who's searching with no luck
Hi mates
I bricked my HTC One S. It was running on ViperS rom long time but i want it flash back to stock rom but i didnt find any new tmo de rom and old didn't work. So i changed cid to supercid. Installed stock EU RUU without problems. Ota update worked after it so i updated it 2 times and next update was to 4.1 that was what i needed but after download during installation something happend, I wasn't watching on screen. I saw only how display turned off and now its good brick . Black screen without, connection to pc its only making conect and dc sound for 30secs in windows( same sound when i disconnect usb device). Neither led don't turn on after connecting to charger.
Any ideas? how to flash BL to mainboard? I reaed about some company which is flashing it. Do u know where is it or have some contact?
Have you checked out this thread?
http://forum.xda-developers.com/showthread.php?t=1990043
[TUT] Downgrade/Unbrick Ville S4
Sent from my HTC One S using Tapatalk 2
droidmakespwn said:
Have you checked out this thread?
http://forum.xda-developers.com/showthread.php?t=1990043
[TUT] Downgrade/Unbrick Ville S4
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
No, it can't help me coz phone is dead i cant turn it or connect with pc adb says no devices found
adb is weird.
Whenever I think my phone is dead (when I do something stupid), I first hold down the power button for five to six second, and see if I get the blinking lights at the bottom of the screen. If nothing, I plug the phone to charge (to make sure it hasn't died. I leave it there for a good hours. Then try the power again. If I don't get anything after that, then I'm positive that I've bricked it.
firefiber said:
adb is weird.
Whenever I think my phone is dead (when I do something stupid), I first hold down the power button for five to six second, and see if I get the blinking lights at the bottom of the screen. If nothing, I plug the phone to charge (to make sure it hasn't died. I leave it there for a good hours. Then try the power again. If I don't get anything after that, then I'm positive that I've bricked it.
Click to expand...
Click to collapse
No he really has bricked because of having SuperCID and doing the JB OTA.
Holy crap, I was actually going to do that. Whoops.
firefiber said:
Holy crap, I was actually going to do that. Whoops.
Click to expand...
Click to collapse
Ya I would just wait in till it comes out for your CID.
heeey
i have a Htc one s i have installed a custom rom not invalable for my phone
nooow the phone he never turn off and also he does not charge
and i don't have any rom in the phone also i can't read the sdcard
please help me :crying:
zakar2009 said:
heeey
i have a Htc one s i have installed a custom rom not invalable for my phone
nooow the phone he never turn off and also he does not charge
and i don't have any rom in the phone also i can't read the sdcard
please help me :crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2184408 > Read ALL of this. This is noob-friendly, it won't take you long. Even if your phone runs out of battery, you won't have a brick, because when you turn the phone on when it has charge, it will stay on the "quietly brilliant" splash screen, so your phone is not destroyed. I'll edit in a link for the stock recovery on this post once I find it and upload it to dropbox.
kylepont said:
http://forum.xda-developers.com/showthread.php?t=2184408 > Read ALL of this. This is noob-friendly, it won't take you long. Even if your phone runs out of battery, you won't have a brick, because when you turn the phone on when it has charge, it will stay on the "quietly brilliant" splash screen, so your phone is not destroyed. I'll edit in a link for the stock recovery on this post once I find it and upload it to dropbox.
Click to expand...
Click to collapse
thank you
but how i charge it. and give some advice to my phone . should i take him turn off for a moment ??
zakar2009 said:
thank you
but how i charge it. and give some advice to my phone . should i take him turn off for a moment ??
Click to expand...
Click to collapse
Erm... If you have an alternative phone charger then try that. The new ones are designed to take the hit if something goes wrong, where they used to be designed so that the phone takes the hit, so there could have been a surge going through and your charger died. If not, then try a different power socket/USB port.
kylepont said:
Erm... If you have an alternative phone charger then try that. The new ones are designed to take the hit if something goes wrong, where they used to be designed so that the phone takes the hit, so there could have been a surge going through and your charger died. If not, then try a different power socket/USB port.
Click to expand...
Click to collapse
thank you
i'm waiting for your drophox link
When you connect your phone to a Windows computer via USB, does it try and install QHSUSB_DLOAD drivers? If so, you are in a messy situation. You'll need to read the unbrick thread in the dev section and unbrick your device.
Sent from my One S using Tapatalk 2
zakar2009 said:
thank you
i'm waiting for your drophox link
Click to expand...
Click to collapse
I had some problems uploading that, I'll try again when I'm home from school today, that will be at around 4pm GMT (8 hours from now)
Sent from my One S using xda premium
usaff22 said:
When you connect your phone to a Windows computer via USB, does it try and install QHSUSB_DLOAD drivers? If so, you are in a messy situation. You'll need to read the unbrick thread in the dev section and unbrick your device.
Sent from my One S using Tapatalk 2
Click to expand...
Click to collapse
can you give me more explication, because that's not work with me
connect your phone with the usb cable to your computer. Open device manager on your computer. Does it say QHSUSB_DLOAD anywhere?
https://www.dropbox.com/sh/re4srugcrtk3tem/RqzbVJphwW
The stock recovery is saved as STOCKS4.img. I'm assuming that you use the all in one kit, so copy it into data/resources/recoveries and then go onto the all in one, select custom recovery and choose the stock. Flash this, then boot into bootloader, click on recovery and that will do the magic for you. Then flash TWRP, flash the boot.img of the ROM you want to use through fastboot. Mine is as follows:
C:\Users\Kyle> cd C:\AndroidSDK\AndroidSDK\sdk\platform-tools
C:\AndroidSDK\AndroidSDK\sdk\platform-tools>fastboot flash boot boot.img
Then copy the ROM onto your SD card or push it through adb if you wish, then flash it through TWRP. You should have a working phone again.