Micromax funbook keeps booting into recovery - help - General Questions and Answers

okay, so, i tried to install CWM on my micromax funbook P255 using Novatools or something.
and now, it keeps booting into recovery (v5.5.0.4 for SmartPad 907c)
and it gives this log below -
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
i've tried flashing a new recovery
when i do 'adb devices', it shows my device in recovery
when i do 'flashboot devices' it doesn't show my device at all
when i try to 'flashboot flash recovery recovery.img' it is stuck on waiting for device.
there's no external SD card yet, but I have a spare one which I tried
I put the recovery.img in a 'newzip.zip' and put the SD card into my tablet, and then tried to install the update from the .zip, but it said 'installation aborted'
i just got this tablet yesterday, i NEED to fix this by myself anyhow!
i've rooted my HTC One V before, so I do have basic rooting experience.
I just want to get my tablet to work, f*ck the root and recovery, just anyhow it can functional normally!
also, there's a reset pinhole at the back, but i don't think it's working, i put a pin in there and nothing happened at all..

help
hey i am having almost the same problem
i have micromax funbook P255
i wanted install custom ROM but i first flashed cwm recovery (cwmics.rar)
when it booted to the recovery, the volume up and down keys are not working only power button for selecting
"reboot" option is highlighted and when i press the power button it shows the boot screen and again comes to the recovery
it is also showing at the bottom
E: can't mount /cache/recovery/ command
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
WHY IS THIS HAPPENING??????????
PPLLEEAASSEE HELP ME FROM GETTING OUT THIS HELL...FOR GOD'S SAKE...!!!

help pls
same problem here.
why the developers then post these kind of recoveries without checking.
feeling very bad.helpless

OK, reflash your stock firmware using live suite. You can get your Micromax P255 stock rom from this link- can't provide link because i am a new memberjust google android 4.0.4 stock rom for micromax funbbok p255.Then click the first link . Scroll down to the bottom and you will see the Mcromax P255 rom . Just download it.You get A zip File. Open it .It contains Live suite and the rom. how to use Live Suite ? Google it .
I had this problem.Fixed it yesterday using this method

This..is a common type of error with the micromax devices with cwm...which often results into imperfect flash.
Your device might be going in boot loop...
Solution;
Open the flashing software(i hope you would be using spreadtrum flashing software;Research Downloader) you are using open the stock image(To find yours google"Micromax all Stock Roms")
Connect your device randomly between vibration ...
You will observe that your computer will load the drivers then suddenly your phone will reboot
Identify the time driver loads ...
Run the system flash software though drivers aren't identified ...
Hold on the flash key(look up on google each set has different pattern) pattern of your phone and plug in cable(iam assuming that usb cable can be used to flash many other standard cable are used i had to cut the supply wire for mine to mske it flashable) at random times it will work.
PRESS THANKS If I was of any help.
Sent from my Micromax A65 using XDA Free mobile app

As of now there is no cwm recovery compatible vid our p255 ..but if u jus want to use ur tab den flash p255 stock firmware from tabletguru website....
Plzzz hit thnx if i helped

Related

[Q] HELP! I cant boot my device after updating to froyo 2.2 vibrant

So i followed i guide to install the froyo 2.2 update to my samsung galaxy s vibrant tmobile version.
my issue all seemed to go fine till it rebooted.
this is what i used
Odin 3 v1.0
S1_ODIN_20100512.pit
i9000XXJP2 Firmware
when it boots it goes into recovery utils
says enter: ok key select with vol up or down
i cant get past this screen i cant click ok
at the bottom it says update media. please wait
e:Can't mount /dev/block/mmcb1k0p1
(invalid argument)
e:copy_dbdate_media:Can't mount SDCARD
your storage not prepared yet, please use UI me nu for format and reboot actions
copy default meda content failed
What should i do now it wont boot?? Thnaks

[Q] PLEASS !HELP! HELP! moto DROID 2 E:can't open /cache/recobery/com

please i need help with my MOTOROLA DROID 2 i had rooted my droid like 2 months ago, at that pint was everything oK. but then i looked on room manager for updates and i found the that says OTA and at that point i had installed gingerbread room on my device everything was good but when i was downloaded the file it stopped without a reason and i started to dowload again this time was complete and when i TRIED TO INSTALLED IT THE PHONE SHOW
This message:
Android sistem recovery<3e>
use volume up/down to highlight and camera to s
reboot sistem now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
E:can't open /cache/recovery/command
WHEN I APPLY SDCARD:UPDATE.ZIP
IT SHOWS
- -install from sdcard. . .
. . .finding update package. . .
openin update package. . .
verifying update package. . .
E:failed toverify whole-file signature
E:signature verification failed
installation aborted
please help me
Please flash any other recovery because you are in stock recoveey
Forever living in my Galaxy Ace using XDA App
how do i flash it
can you tell me how do i flash mi phone on the way that you say
i don't know how to do anything with my droid cause i cant turn it on and when i plug it un all what it does is shows the big letter of motorola the "M" AND I HAVE TO GLUG ITIN AND THEN TRY TO GO RECOVERY MODE AND IT JUST SHOW THE TRIANGLE AND THE"!" AND I CANT GO TO THE RECOVERY MODE THE WAY THAT IT SUPOSSE TO DO IT AND WHEN I PRESS THE LETTERS AROUND THE "Z" IT SHOWS android sistem recovery please help me
Please use the Q&A Forum for questions Thanks
Moving to Q&A

My I9003 Is Dead...After Flash

My I9003 Is Dead...After Flash
after i flash I9003JPKP5 all is done but phone run to 3e recovery
and show this error message.
E:can't mount/dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:can't mount SDCARD
your storage not prepared yet.please use UI menu for format and reboot actions.
copy default media cantent failed.
i try to reboot but that phone wont go in UI menu...
now keep restart
Just reflash using odin following insturctions closely. Its a soft brick, nothing to worry about.
Cheers
Sent from my i9003 powered by Cyanogenmod 7
ngagegames said:
My I9003 Is Dead...After Flash
after i flash I9003JPKP5 all is done but phone run to 3e recovery
and show this error message.
E:can't mount/dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:can't mount SDCARD
your storage not prepared yet.please use UI menu for format and reboot actions.
copy default media cantent failed.
i try to reboot but that phone wont go in UI menu...
now keep restart
Click to expand...
Click to collapse
Here's a step by step tutorial on how to recover a soft bricked I9003
Your storage not prepared yet
I am getting the same error message after flashing to xxkpe, is there a fix for this?
redcarullo said:
I am getting the same error message after flashing to xxkpe, is there a fix for this?
Click to expand...
Click to collapse
facing the same problem...pls help
i dont know my base number also..
http://plusandroid.posterous.com/recover-a-soft-bricked-galaxy-sl-gt-i9003
Have you all tried this tutorial?
stuck on sumsung logo
i can enter into download mode with simple vol down+ok+power...i also flashed it with xxkph (i dont know my base model number)..but still same stuck on sumsung boot ... and error like can't mount sdcard
You guys should try this....hope it helps.
http://forum.xda-developers.com/showpost.php?p=26505576&postcount=1295
Don't forget the thanks button

[Q] Help : My Phone isn't detecting in Odin

Not being detected in Odin3 1.3, 1.83, 1.85, Drivers are installed properly, Tried in two systems and all USB ports, I had flashed UC V8, Was in MIUI and was updating when new updates were releasing through CW mode, Even had tried cm7 V2, now the USB mass storage isn't working, its just charging, and when i go to download mode and connect to system with Odin on, phone isn't detecting, USB Debugging is checked, Firewall and anti virus is off.
Working : CW mode, can flash through that.
Can not bear battery drain anymore in MIUI, so going back to Stock/Titanium.
My phone is Samsung Galaxy Sl I9003
Can you tell us what did u do before this happened?
First i was in stock KPN, then i flashed UC V8 and then through CW mode i flashed zip file of MIUI 9, then when update came, i had inatalled zip MIUI 10 through cw mode, then since there was heavy battery drain, i flashed cm 7.2, but since i used to like UI of MIUI and no change in battery drain, i flashed MIUI next version.. between this, i forgot till when i could do mass storage, but suddenly few days back it was just battery charging when i connect to sys, then i thought it will be fine if i go back to stock( also battery is better in that)/ thought to install titanium rom DDKP3, but now to do that, odin is not detecting device..
driver is installed properly, tried uninstalling and installing, tried in diff systems, diff cables, all the USB ports, but its just getting charged, USB Debugging is checked..
Help please..
recovery and downloading mode working.. i can also flash from zip files without any problem..
Re install...
RE
install drivers........kies
check ur ports....
download new odin.....
check ur usb cable....try ur friends..
nd finally if all is good...nd still nt working..
format ur windows..
Hope this helped
He tried on two systems, I guess its not Windows. When you connect your running device (not download mode) do you hear that typical device connected sound?
Sent from my GT-I9003 using XDA
YEAH...
Im in w7..
I also hear while in download mode.......also..dat tring
I guess it would be driver(kies)problem.....
Sure this would also work in download mode, but if she does, I wanted to ask whether she is able to communicate with the phone over adb or not...
If yes -> Some strange problem. Try to reinstall the drivers, but i think she has a low chance that this will work.
If no -> Probably the drivers are damaged?!? The system recognizes a usb device. Try a reinstall...
If she doesn't even hear a sound from her computer its something with the phone that probably only gets charged due to voltage on the usb port...
Sent from my GT-I9003 using XDA
Even i face this problem in MIUI. USB storage works occasionally for me. When it worked i had transferred CM7 rom.
USB works in CM7 but not in MIUI for me. So it isnt any driver problem on the pc.
my samsung galaxy s gt i9003 mt booting
my samsung galaxy s gt i9003 stop on booting screen hang on startup screen
When I tried to enter in "Recovery mode" it give followin massage:
Android system recovery <3e>
Enter : Ok Key, Select : Vol Up/ Vol Down
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
---------------------------------------------------------
E:failed to mount /data (no such file or directory)
--Copying media files...
Sucessfully copied media files.
# MANUAL MODE #
-- Appling Multi-CSS...
Installing Multi-CSS
Can't access to '/system/csc/INU/system/'.
Successfully applied multi-CSS.
and sometime When I tried to enter in "recovery mode" it give followin massage:
Android system recovery <3e>
Enter : Ok Key, Select : Vol Up/ Vol Down
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
---------------------------------------------------------
E:failed to mount /data (no such file or directory)
--Copying media files...
E:failed to mount /data (File exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet, Please use UI menu for format and reboot action.
Media files copy failed.
# MANUAL MODE #
-- Appling Multi-CSS...
Installing Multi-CSS
Can't access to '/system/csc/INU/system/'.
Successfully applied multi-CSS.
its not detecting in odin also
someone help me plz
try to take away external sd card and sim i got the same problem on the original froyo rom and was unable to update the phone whitout pulling them out (both odin and kies was unable to recognize the phone but i was able to use it as mass storage)

[Resolved] unable to mount storage n 0 mb internal storage

i have Micromax unite 2 , thats a mediatek device
installed custom recovery TWRP V3
when am doing this in twrp
1. Install zip
2. Wipe/ advanced /format
3. ADB side loading failed
4. fix permissions
5. Mount > unable to select system/cache/data
6. Restore
7. Partition external sd card i didn't tried
I am getting this errors
E: Unable to mount '/system'
E: Unable to mount '/cache'
E: Unable to mount '/data'
Unable to mount storage
after searching a lot on web i didn't find anything useful even though some are mentioning it as "big deep problem n something related to motherboard etc.) that's y am posting this
(worked for my device hope works for others too)
I don't what this error actually means or how it get fixed from what i did
I SIMPLY FLASHED A STOCK ROM FROM LAPTOP
(am not adding any links bcz this is my first post so am not allowed , but u will easily get the steps details on web)
as TRWP isn't working at all
use a PC/LAPTOP with a working USB cable
1. Download drivers of device n installed in PC (there r various methods available find a suitable one for ur device)
2. for mediatek device use SP FLASH TOOL for flashing ROM/CUSTOM ROM i used STOCK ROM (or find a suitable way to flash from PC/LAPTOP depending on ur device)
3. follow the procedure of flashing ROM as described
4. After successful flashing disconnect phone from PC/LAPTOP and reboot phn (it will take some tym on first boot so wait for some minutes)
5. All done
n check ur IMEI (*#06#) if u get INVALID
as i get then just use MAUI META OR SN WRITE TOOL (or any other method suitable to ur device some apps r also mentioned which works on rooted device to fix this) i used maui meta
n might b u get NVRAM WARNING: ERR= 0*10( if used SP FLASH TOOL) simply search on web n u will resolve it
phone is working fine am also using internet
worked for me( didn't tried on any other device)
hope works for others also, who r getting this error
Al the best

Categories

Resources