I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
AlGeri said:
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
Click to expand...
Click to collapse
are you kidding me?
i really wanna know why can't people read before asking?
you don't need clockworkmod to flash 4.2.2
and you can't, if it actually started, you'll actually brick it
do your own searching job in the whole s2 plus forum
there are so many complete guides around the whole forum and nobody reads and keep asking questions which answers have been provided already.
just as @KINGbabasula said
"if everyone is 'just asking', then the whole forum will be filled with useless and meaningless questions"
Ok first of all you dont need to be such nervous about it -.- ... Im a newbie and dont understand very well the process . Can you please post a link of it it will be appriciated . I will delete the post then evetybody will live in peace
AlGeri said:
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
Click to expand...
Click to collapse
You know that search button on xda? Use it
Sent from my GT-I9105P using xda app-developers app
safariking said:
You know that search button on xda? Use it
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
exactly
AlGeri said:
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
Click to expand...
Click to collapse
erm,you have the wrong concept:
first of all,the method you use is for custom rom or any modded rom with zip file.
but what u have there is official firmware,which meant for flashing with odin(some sort of samsung's flashing program)
1)exact the file u downloaded until you got .tar.md5 in the end of the file name.
2)download odin 3.04
3)select ''I9105XXUBMH4_I91050XEBMH....tar.md5'' in the ''pda''
4) click ''start'' once u connected your phone in download mode(power+vol up+home button)
something like the photo i attached
Nothing happened
nickchk said:
erm,you have the wrong concept:
first of all,the method you use is for custom rom or any modded rom with zip file.
but what u have there is official firmware,which meant for flashing with odin(some sort of samsung's flashing program)
1)exact the file u downloaded until you got .tar.md5 in the end of the file name.
2)download odin 3.04
3)select ''I9105XXUBMH4_I91050XEBMH....tar.md5'' in the ''pda''
4) click ''start'' once u connected your phone in download mode(power+vol up+home button)
something like the photo i attached
Click to expand...
Click to collapse
Thanks for giving a proper answer ... Iv done that and after it finished and the "pass" was shown at odin 3.04 the phone automatically rebootet! i expetdet the newer version but instead it showed "installing new apps" after finishing nothing changed the same android version 4.1.2 (( Nothing happened after flashing :/ I dont know what im doing wrong
AlGeri said:
Thanks for giving a proper answer ... Iv done that and after it finished and the "pass" was shown at odin 3.04 the phone automatically rebootet! i expetdet the newer version but instead it showed "installing new apps" after finishing nothing changed the same android version 4.1.2 (( Nothing happened after flashing :/ I dont know what im doing wrong
Click to expand...
Click to collapse
which means you flashed the 4.1.2 again and without wiping.
which
you were not flashing 4.2.2
link?
Ok then can you please redirect me to a 4.2.2 rom ? But for gt-9105 version
AlGeri said:
Ok then can you please redirect me to a 4.2.2 rom ? But for gt-9105 version
Click to expand...
Click to collapse
Brian was right,you flash 4.1.2 again,try to separate firmware and don't get confuse. This is the link
http://live.samsung-updates.com/details/13204/Galaxy_S_2_Plus/GT-I9105/SER/I9105XXUBMH4.html
Yep you have to know what is a firmware and what is a custom rom. Or you'll risk bricking your phone in your further flashing
Sent from my GT-I9105P using XDA Premium 4 mobile app
MTk6589 galaxy s4
Please help
cannot install my file zip to my s4
install/sdcard
installation aborted
assaness said:
Please help
cannot install my file zip to my s4
install/sdcard
installation aborted
Click to expand...
Click to collapse
how many times do we have to say post these questions in your own forum
Sent from my GT-I9105P using XDA Free mobile app
AlGeri said:
I have a sg2 plus GT-1905 (without the p version) ...I have installed the latest Clockworkmod recovery v6.0.3.1 ..Iv been trying to update from 4.1.2 to 4.2.2 but without succes cuz when i try to install zip from sdcard it says :
E:Cant open /sdcard/I9105XXUBMH4_I91050XEBMH3_SER (1) - copy.zip (bad)
installation aborted.
Iv seen the other forums with the same problem and tried:
toggle on off signature verification
wipped data factory reset
formated my 2gb external sd card to fat32
redownloaded the zip file again
trying to install from internal and external but non of that worked and gave me the (bad) error .
Click to expand...
Click to collapse
Official 4.2.2 can be installed with odin, not in cwm
Updates at this thread have been stopped. Please check out Devs-Lab.com for all stuff that is/was/would be here. Links below are provided for reference, and will not be updated from now.
The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.
Click to expand...
Click to collapse
Original Karbonn ROM :
https://tr.im/20c3b
Click to expand...
Click to collapse
Stock ROM in a flashable Zip format :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Here are the Custom Recoveries for this device :
Preferred, Tested : Philz Touch Recovery 6.57.9 ( based on ClockWorkMod Recovery v6.0.5.1 )
https://tr.im/2eae8
TWRP Recovery 2.7.1.0 ( Touch )
https://tr.im/1757c
ClockWorkMod recovery for Karbonn Titanium S5 Plus : ( Non - Touch )
tr.im/RWOT
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( Modded by carliv @ xda )
tr.im/f2c21
Click to expand...
Click to collapse
Next, Here are the Custom ROMs
Click to expand...
Click to collapse
Sony Xperia Z:
https://www.dropbox.com/s/e8sq7s60de...nn_S5_Plus.zip
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.
Click to expand...
Click to collapse
Sony Xperia Z v2:
https://tr.im/ca47d
Credits : Ajinkya Mishra
Mayank Girdhar
Click to expand...
Click to collapse
Miui v5 :
http://www.needrom.com/wp-content/up...37e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Click to expand...
Click to collapse
Lewa OS:
https://tr.im/LewaOSforS5Plus
Click to expand...
Click to collapse
MIUI v6:
https://tr.im/MIUIv6forS5Plus
Click to expand...
Click to collapse
Samsung Galaxy Note 3-themed ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Stock Flashable ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Android Lollipop-themed ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Fly UI ROM :
https://www.dropbox.com/s/8q6ap1lnht...tfors5plus.zip
Click to expand...
Click to collapse
Samsung Galaxy S5-themed ROM :
http://www.4shared.com/zip/vP4RARWOba/XtremeS5.html?
Click to expand...
Click to collapse
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
http://karbonnroms.blogspot.in
Click to expand...
Click to collapse
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
Click to expand...
Click to collapse
SystemUI.apk and SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyub...lus_Syste.html
Click to expand...
Click to collapse
Steps for flashing a .img file to a specific partition ( here, recovery ) :
Here are the two methods :
1st Method ( Using ADB ) -- This needs the phone to be connected to the computer.
Go to the folder containing the recovery.img file you just downloaded.
Shift + Right Click on any empty space in the folder and Select Open Command Window Here
Connect the phone to the computer and make sure you have USB Debugging enabled and not USB Storage
Type these into the Command Window :
adb devices -- This should show the Device attached as KarbonnTitaniumS5Plus-xxxx or any such line.
adb get-state -- This is to ensure USB Debugging works. It will show device, recovery or offline, but here, we would be looking for device
adb reboot bootloader -- This reboots the device into Fastboot mode, also called as HBOOT or Bootloader. This mode is necessary for flashing the recovery.img file
fastboot oem unlock -- This is to ensure that you can flash xxxx.img files to specific partitions of the device.
fastboot flash <<partitionname>> <<nameofrecoveryimagefile.img>> -- This flashes the specific partition image file to the specified partition. Here, we would be looking for something like fastboot flash recovery philzrecoverys5plus.img for the PhilZ Touch Recovery and fastboot flash recovery twrprecovery.img for the TWRP Recovery and fastboot flash recovery cwmrecoverys5plus.img for the.... Well, you understand what I mean. This should show some text on the device like Transferring Flash or Writing Flash and the Time and Speed of it, that would confirm your flashing.
fastboot reboot -- This command reboots the device into the normal system, and lo, you're ready to go !
Click to expand...
Click to collapse
From here, you can reboot to recovery and back again without any issues. This is the tried and tested method, the method which worked perfectly when I tried it on my device. Else, if you have no patience for connecting the Phone to the PC, jabbing on the keyboard and entering n number of commands, you could try this out :
2nd Method ( Using Terminal Emulator ) -- This doesn't need the phone to be connected to the computer.
Place the recovery.img file in the Internal Storage or External SD Card -- Here, I'm placing it as in storage/sdcard0/xxxxrecovery.img
Install Terminal Emulator or any such app onto the phone and Open it.
Type these commands one by one :
su -- This gives root permissions to the Command Executor.
flash_image recovery /storage/sdcard0/xxxxrecovery.img -- This flashes the recovery image file to the recovery partition.
Close the Terminal Window.
Done !
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Another Note : If you're following the Second ( Terminal Emulator ) Method, note that there is a space between flash_image and recovery and the path of the image file. The first method is the preferred one, which worked perfectly with no errors for me; while the second method is risky and might return some errors while trying it out.
Click to expand...
Click to collapse
Another Loooooong Shortened Note : The TWRP Recovery might, in some rare cases, show your battery level as 19% when it is at 99% and the same goes for the others. If you are encountering this error damn frequently, I'd recommend reverting back to the original CWM basic recovery as it doesn't show any battery info at all ! You also have the option of wiping your Battery Statistics in case the Battery Error in the Touch Recoveries made the system too show the same error. Once, after fully charging the phone to 100% and rebooting to recovery, I found that the TWRP recovery showed the battery level at 19% ! Out of curiosity, I rebooted back to the system and it too, showed it at 19% ! I just plugged it into the charger and was like Whoa !, as the battery sprang from 19% to 24% in 7 seconds flat ! I know that neither the reboot to recovery does drain out that much battery, nor does the recovery randomly perform such miracles on it. So, I just flashed CWM basic recovery to it using fastboot mode, opened it, did a Battery Stats wipe and rebooted to the System. It was back to 99% ! So, a full Battery Statistics wipe helped me solve such errors, and might do the same to you too. Just remove the battery from the phone after you power off from the recovery, put it back in, and let the phone start up. Problem Solved ! Damn, why didn't I think of this earlier ?
Click to expand...
Click to collapse
Yet Another Short-But-Not-So-Short Note : I'd recommend disabling the Boot Animation on the phone ( using ROM Toolbox Lite or Pro ) so that the possibility of bootloops is diminished. No Boot Animation = Less Chance of Bootloops !
Click to expand...
Click to collapse
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
Check this thread for further development on this device.
If anybody is willing to volunteer to try a ROM still in development for this device, you can download it here :
https://tr.im/CarbonForKarbonnv1
It is NOT READY FOR FLASHING, but is a Kitkat ROM, so anybody willing to put in their efforts in the development of this ROM can help.
Click to expand...
Click to collapse
rjt.rockx said:
The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.
Original Karbonn ROM :
https://tr.im/20c3b
First off, Here are the Custom Recoveries for this device :
ClockWorkMod recovery for Karbonn Titanium S5 Plus :
tr.im/RWOT
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( modded by carliv @ xda )
tr.im/f2c21
Next, Here are the Custom ROMs
Sony Xperia Z:
https://www.dropbox.com/s/e8sq7s60de...nn_S5_Plus.zip
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.
Sony Xperia Z v2:
https://tr.im/ca47d
Credits : Ajinkya Mishra
Mayank Girdhar
Miui :
http://www.needrom.com/wp-content/up...37e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
http://karbonnroms.blogspot.in
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
SystemUI.apk and SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyub...lus_Syste.html
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
By the way, I'll be uploading links to some must-have apps for a custom ROM user within a few days. Check this thread for further development on this device.
Click to expand...
Click to collapse
Hey there,my question might seem foolish but just wanted to know if our device supports USB otg?
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
Hey there,my question might seem foolish but just wanted to know if our device supports USB otg?
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes and No.
No, as it isn't included in the device's features and comes with no otg cable.
Yes, if you buy a third party USB OTG cable and install chainfire's stickmount app.
Here's the link to the app :
https://play.google.com/store/apps/details?id=eu.chainfire.stickmount
and the xda thread :
http://forum.xda-developers.com/galaxy-nexus/themes-apps/23-03-2014-stickmount-v3-01-t1400034
Hope it helps !
Heck is their the possibility that i might get bootloop!!!Because the last time I tried one of Chainefire's app(chain fire 3D)I got stuck on 1.But anyways thanks
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
Heck is their the possibility that i might get bootloop!!!Because the last time I tried one of Chainefire's app(chain fire 3D)I got stuck on 1.But anyways thanks
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nah, there is no possibility of getting bootloop. The app doesn't need reboot at all !
Good news !
Finally, TWRP Recovery v 2.7.1.0 has been ported to our device by... me.
It works !
Features :
Touch recovery
Navigation buttons enabled
Displays Time, Date, Battery, etc.
File Manager built in
Option to Partition SD Card
Terminal Commands supported
ADB Sideload available
Ability to reboot into System, Recovery, Bootloader or Power Off
Can mount USB Storage
Toggles:
Zip file signature verification
Usage of rm -rf instead of formatting
Skip MD5 generation during backup
Enable MD5 verification of backup files
Screen Timeout Setting
Brightness Slider
Time zone Chooser
Keyboard built-in
Uploading the recovery.img file after some time. Check this thread for further updates !
Here's the link to the TWRP Recovery :
https://tr.im/1757c
Hope it helps !
rjt.rockx said:
Here's the link to the TWRP Recovery :
https://tr.im/1757c
Hope it helps !
Click to expand...
Click to collapse
Still working on the Carbon ROM... May take a few more days to create a working,booting ROM !!!
( Creating a new update binary file now, old one wasn't working. )
Anyway, after this and the flashable stock rom zip file, i'll be porting miui 6 to this device !
After that, maybe, I was thinking of an Android L ROM for this device...
Anyway, Back to Project CarbonForKarbonn for now...
Could anyone upload the specifications of moto g (codename falcon) in a post here ?
I need to know it's features and some information abt. it, like whether it supports dual sim, has external sd card support, etc.
so that I could rectify any problems which are occuring because of such non-compatibility errors.
Looooooong schedule... this might take forever...
rjt.rockx said:
Still working on the Carbon ROM... May take a few more days to create a working,booting ROM !!!
( Creating a new update binary file now, old one wasn't working. )
Anyway, after this and the flashable stock rom zip file, i'll be porting miui 6 to this device !
After that, maybe, I was thinking of an Android L ROM for this device...
Anyway, Back to Project CarbonForKarbonn for now...
Could anyone upload the specifications of moto g (codename falcon) in a post here ?
I need to know it's features and some information abt. it, like whether it supports dual sim, has external sd card support, etc.
so that I could rectify any problems which are occuring because of such non-compatibility errors.
Looooooong schedule... this might take forever...
Click to expand...
Click to collapse
As for TWRP how should I flash it?I already have CWM so what should I do in this case? I just want to try TWRP so pls tell me how should I remove CWM.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
As for TWRP how should I flash it?I already have CWM so what should I do in this case? I just want to try TWRP so pls tell me how should I remove CWM.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to have ADB and Fastboot tools and the recovery file in the same folder.
Connect the device to the computer, open USB Debugging in Android, open a command window in the folder with adb and twrprecovery.img image ( Shift + Right Click ), and type these commands in it :
adb root -- Don't worry if this shows any error like adbd cannot run as root in production builds. Just proceed with the next step.
adb devices
adb reboot bootloader
fastboot flash recovery twrprecovery.img -- This will automatically format that partition and install the recovery image to it.
fastboot reboot
adb reboot recovery
Done !
Anyway... Building the final parts of the Carbon Nightly ROM, also simultaneously working on MIUI 6 for this device.
Stock ROM build is happening... Just have to generate the updater-script and the update binary.
Status of Each Build :
Carbon ROM : Needs a new Update Binary, creating it, coding it.
TWRP Recovery : Done !
MIUI 6 : Downloading the latest release version. Porting and Update Binary and Updater Script pending.
Stock Flashable Zip : Creating all Update files from scratch, system folder is ready, deodexing pending, App updates pending.
Xperia v3 : Boot Animation Build Progressing, Updating all stock Google apps, Adding Xposed Framework, etc.
Android L ROM : Waiting for a Stable Android L ROM to be released here, still no progress.
Here are the basic mount points of this device which I accidentally discovered while messing about in the Stock ROM :
system : [email protected] : dev/block/mmcblk0p8 -- This is for the System folder, has ext4 partition type
data : [email protected] : dev/block/mmcblk0p10 -- This is for the Data folder, has ext4 partition type
cache : [email protected] : dev/block/mmcblk0p9 -- This is for the Cache folder, has ext4 partition type
Hope it helps !
Which do you think is better : External SD Card as Main Storage or Internal SD Card as Main Storage ?
Anybody can reply by posting here.
This question is for the Carbon ROM and the Stock Flashable Zip ROM.
I felt I should ask you this question as I felt that Internal SD Card has way too less storage for me, but my decision cannot be everybody's decision, can it ?. ( I have 180+ Apps on this device, all linked to SD Card ( 32 gb, ~1.5 gb free space remaining ) ).
rjt.rockx said:
Which do you think is better : External SD Card as Main Storage or Internal SD Card as Main Storage ?
Anybody can reply by posting here.
This question is for the Carbon ROM and the Stock Flashable Zip ROM.
I felt I should ask you this question as I felt that Internal SD Card has way too less storage for me, but my decision cannot be everybody's decision, can it ?. ( I have 180+ Apps on this device, all linked to SD Card ( 32 gb, ~1.5 gb free space remaining ) ).
Click to expand...
Click to collapse
Internal SD card is always a better options.Anyways keep it up with all the developments.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
But then, what about the apps ? Wont you need that much storage for apps ?
rjt.rockx said:
But then, what about the apps ? Wont you need that much storage for apps ?
Click to expand...
Click to collapse
But any was 2 GB storage is much low.Heck I have installed so much things on my device I have been having 'storage space running out' since two weeks!Anyways try to keep the internal storage as our SD Card.
Oh and nobody seems to be active on this thread except you and me.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
cybercrawler said:
But any was 2 GB storage is much low.Heck I have installed so much things on my device I have been having 'storage space running out' since two weeks!Anyways try to keep the internal storage as our SD Card.
Oh and nobody seems to be active on this thread except you and me.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah... But once I upload the ROMs which I am building, some more will definitely visit.
Hi rjt.rockx.....Thank you very much for ur hard work to make our device pretty awesome....
Plz make the ext. Sd card as main storage bcoz 2gb space s not enough for application itself.......
Wishing u all the best in ur current n future projects....:beer::beer::beer:
Sent from my GT-N8000 using XDA Premium 4 mobile app
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
Currently am using xperia v2 rom....everything works pretty good n smooth.........Eagerly waiting for ur future updates.......And one more thing , camera quality s not that good in low light. So any changes will be pretty nice too....
Sent from my GT-N8000 using XDA Premium 4 mobile app
rjt.rockx said:
Yeah... But once I upload the ROMs which I am building, some more will definitely visit.
Click to expand...
Click to collapse
Is there any way to change the on-screen soft keys to look them like that of Nexus 5 lollipop soft keys.They look really cool and other thing is the transparency of the on screen buttons.It would be great if you made this above mod in the new ROM
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
algates said:
Hi rjt.rockx.....Thank you very much for ur hard work to make our device pretty awesome....
Plz make the ext. Sd card as main storage bcoz 2gb space s not enough for application itself.......
Wishing u all the best in ur current n future projects....:beer::beer::beer:
Sent from my GT-N8000 using XDA Premium 4 mobile app
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
Currently am using xperia v2 rom....everything works pretty good n smooth.........Eagerly waiting for ur future updates.......And one more thing , camera quality s not that good in low light. So any changes will be pretty nice too....
Sent from my GT-N8000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I'm working on that. You know that camera you have in other Xperia devices with all that Timescape feature and everything ? I'm adding that to the updated version of this ROM. But, the ROM will still be based on Android Jellybean 4.2.2. I'm sorry, but there's nothing I can do about that because, if I change the base OS, I'll have to rebuild all the apps from scratch to fit alongside the new permissions and all that stuff, which will take off most of my time.
I'll consider your decision about the Main Storage, but there's one drawback about using it that way. You won't be able to remove your SD Card or unmount it while the OS is on. If that's okay with you, please reply. Anyway, if you want to change it afterwards, you can do so by the vold.fstab edit which cybercrawler had mentioned here : http://forum.xda-developers.com/showpost.php?p=55154053&postcount=31
Thanks for your opinion, by the way !
Rom:https://drive.google.com/file/d/0BxEtNjv9mRSsemdnS3lFb3E1M3M/view?usp=drivesdk
Port patch:https://drive.google.com/file/d/0B1VlhmzBW9opRkVveVNMcWhxblE/view?usp=drivesdk
After logging with mi account and on opening other account in setting FC occurs
FC with following error message
drsarkar said:
FC with following error message
Click to expand...
Click to collapse
Ok
After 2 -3 day upload new version of miui
Recovery image file
iammrugesh said:
Rom:https://drive.google.com/file/d/0BxEtNjv9mRSsemdnS3lFb3E1M3M/view?usp=drivesdk
Port patch:https://drive.google.com/file/d/0B1VlhmzBW9opRkVveVNMcWhxblE/view?usp=drivesdk
Click to expand...
Click to collapse
Sir,
Please share the recovery img file, which you are using for flash this rom. I am getting error (cant extract system to system) while loading the rom.
Thank u,
Abhijith
abhirai22 said:
Sir,
Please share the recovery img file, which you are using for flash this rom. I am getting error (cant extract system to system) while loading the rom.
Thank u,
Abhijith
Click to expand...
Click to collapse
Dear friend pls use Philz or twrp recovery.
Remember to partition internal storage to more than 1.5 gb.
recovery
drsarkar said:
Dear friend pls use Philz or twrp recovery.
Remember to partition internal storage to more than 1.5 gb.
Click to expand...
Click to collapse
hi, friends,
I have installed PhilZ 6.57.9 cwm 6051recovery and I have 7gb internal memory partition, but still I am getting same error that " failed to extract dir from system to system". Kindly help me......
Bug
I have installed this ROM
Facing some issues
1. IInd sim is only 2g, please try to Port dual SIM 3g
2. In security app battery shows only 2000 mah and so battery don't work properly some times charge and discharge at once.
Please bro fix this ROM and upload newer version. I am Miui lover.
Thanks