hi
sorry for bad english
i have a htc one xl ( evita ) with J__015 cid and build xx.401.xxx
for update to 4.2.2 we need to s off and super cid
after super cid and run ruu phone Breaked
jtag by RIFF and dll HTC_OneXL_PJ8312000.dll problem sloved and write supercid flashed by
RUU_EVITA_UL_ICS_40_S_hTC_Asia_WWE_2.23.707.2_Radio_0.19as.32.09.09_L_10.104b.32.25L_release_271654_signed.exe
and again wite CID HTC__044 by riff and update to 4.1.1 and 4.2.2 by WIFI
now phoen is no service and signal
info before jtag and...
C:\>Fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.10.0000
INFOversion-baseband: 3.12.38.00.24
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.01.401.03
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT2CTW302008
INFOimei: xxxxx0050183663
INFOproduct: evita_utl
INFOplatform: HBOOT-8960
INFOmodelid: PJ8350000
INFOcidnum: HTC__J15
INFObattery-status: good
INFObattery-voltage: 4134mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-b27b8968
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.069s
After ( NOW )
INFOversion: 0.5
INFOversion-bootloader: 2.15.0000
INFOversion-baseband: 1.30a.32.45.18
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.05.707.1
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT28EW301290
INFOimei: xxxxx0050183663
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8312000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 3860mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-de589c6eef
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
hi
sorry for bad english
i have a htc one xl ( evita ) with J__015 cid and build xx.401.xxx
for update to 4.2.2 we need to s off and super cid
after super cid and run ruu phone Breaked
jtag by RIFF and dll HTC_OneXL_PJ8312000.dll problem sloved and write supercid flashed by
RUU_EVITA_UL_ICS_40_S_hTC_Asia_WWE_2.23.707.2_Radio_0.19as.32.09.09_L_10.104b.32.25L_release_271654_signed.exe
and again wite CID HTC__044 by riff and update to 4.1.1 and 4.2.2 by WIFI
now phoen is no service and signal
info before jtag and...
C:\>Fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.10.0000
INFOversion-baseband: 3.12.38.00.24
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.01.401.03
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT2CTW302008
INFOimei: xxxxx0050183663
INFOproduct: evita_utl
INFOplatform: HBOOT-8960
INFOmodelid: PJ8350000
INFOcidnum: HTC__J15
INFObattery-status: good
INFObattery-voltage: 4134mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-b27b8968
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.069s
After ( NOW )
INFOversion: 0.5
INFOversion-bootloader: 2.15.0000
INFOversion-baseband: 1.30a.32.45.18
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.05.707.1
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT28EW301290
INFOimei: xxxxx0050183663
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8312000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 3860mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-de589c6eef
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
again sorry for bad english and need help TNX
If you knew you needed SuperCID and S-off (only needed for installing 2.15 firmware with Sense 5 custom ROMs), why did you SuperCID then run the RUU?
SuperCID and S-on is a known brick with Jellybean RUUs.
How did you end up updating to 5.05, was it by OTA?
redpoint73 said:
If you knew you needed SuperCID and S-off (only needed for installing 2.15 firmware with Sense 5 custom ROMs), why did you SuperCID then run the RUU?
SuperCID and S-on is a known brick with Jellybean RUUs.
How did you end up updating to 5.05, was it by OTA?
Click to expand...
Click to collapse
tanx for replay
I wanted to update the orginal version
for build 401 no 4.2.2 updata avaliable
i change the build number and run RUU RUU_EVITA_UL_ICS_40_S_hTC_Asia_WWE_2.23.707.2 and update from about >> update
frist update to 4.1.1 and 4.2.2 from about > software Updates
Now what way do you recommend for the no network problem ??
I need to help you
This may be proof evita ul and evita utl radios are not compatible.
This was assumed but never proven before.
The answer to the no network problem is likely you need to flash an evita utl radio again. But no images for one have been uploaded anywhere.
Another user with a functional evita utl and root should dump all partitions, in particular radio so we have access to radio 3.12.38.00.24.
eg:
adb shell dd if=/dev/block/mmcblk0p17 of=/sdcard/radio.img
Then upload the radio.img somewhere so alireza1994 can download it and flash.
fastboot flash radio radio.img
This is why you should not flash things that were not designed for your model of phone.
twistedddx said:
This may be proof evita ul and evita utl radios are not compatible.
This was assumed but never proven before.
Click to expand...
Click to collapse
Ahhh, missed that the OP has the utl variant (but its right there, amongst the posted info). Yes, it looks like this is an incompatibility of "standard" HOX software with the utl hardware. The incompatibility has been speculated, and I think another utl owner bricked his device trying to flash something meant for the "standard" evita. So the OP is lucky in this regard, and there is still some chance to recover.
redpoint73 said:
Ahhh, missed that the OP has the utl variant (but its right there, amongst the posted info). Yes, it looks like this is an incompatibility of "standard" HOX software with the utl hardware. The incompatibility has been speculated, and I think another utl owner bricked his device trying to flash something meant for the "standard" evita. So the OP is lucky in this regard, and there is still some chance to recover.
Click to expand...
Click to collapse
Yeah you're right, there was a guy that flashed a standard hboot or firmware package and it bricked his UTL variant.
Sent from my Evita.
redpoint73 said:
Ahhh, missed that the OP has the utl variant (but its right there, amongst the posted info). Yes, it looks like this is an incompatibility of "standard" HOX software with the utl hardware. The incompatibility has been speculated, and I think another utl owner bricked his device trying to flash something meant for the "standard" evita. So the OP is lucky in this regard, and there is still some chance to recover.
Click to expand...
Click to collapse
tnx
I'll offer you a way to solve the problem
after jtag mid is PJ8312000 After the change mid ?
I need step by step guidance to complete
Why do you want to change the MID?
Sent from my Evita.
timmaaa said:
Why do you want to change the MID?
Sent from my Evita.
Click to expand...
Click to collapse
What is your way do you recommend for this problem?
I did not understand what you mean.
:crying:
timmaaa said:
Why do you want to change the MID?
Sent from my Evita.
Click to expand...
Click to collapse
Phone antenna problem that I solved with this version of the profile is?
How can I back to normal?
It's really difficult to understand what you're saying with the translation.
Do you have service now?
Sent from my Evita.
evita_utl no servise
Now I'm on the phone SIM card. But the network is not found. But the Apns name is on my network.
mcinet (this is my operator) see? So we decided to activate the phone's internet settings but no network
I'm beginning to think your SIM card isn't compatible, have you activated the SIM card with your operator?
Sent from my Evita.
timmaaa said:
I'm beginning to think your SIM card isn't compatible, have you activated the SIM card with your operator?
Sent from my Evita.
Click to expand...
Click to collapse
my simcard is activated .i test other simcard
I am a mobile repair shop
My job was to update the phone. But it was pouring Rove break and after repair with riff box antenna does not
2 days later I opened it, I buy a phone of the same model with riff box to get a full Dump. And the customer is on the phone (the phone down) and I guess
Does this work?
Are you sure you loaded the correct firmware to the device?
Sent from my Evita.
What does, Fastboot getvar all, show since you flashed things with the riffbox?
APN details are likely being detected because of the sim card installed.
No network could be these issues:
1)Radio firmware is not compatible. Return the phone to original firmware.
2)ROM is not compatible. Return the phone to original ROM.
3)The phone is damaged.
No one that posts in these forums has much information about Evita_UTL's.
The language barrier means information about this model of phone is very vague.
timmaaa said:
Are you sure you loaded the correct firmware to the device?
Sent from my Evita.
Click to expand...
Click to collapse
no . i need a full dump by riff box.
are you can upload your radio?
I don't have the middle eastern variant so my radio isn't compatible. The owner of this thread has been asked to upload it but he hasn't replied yet.
Sent from my Evita.
alireza1994 said:
no . i need a full dump by riff box.
are you can upload your radio?
Click to expand...
Click to collapse
99.99999% of users on this forum have Evita_UL, not Evita_UTL.
You have flashed Evita_UL firmware to your Evita_UTL which has caused these problems.
We do not have any full dumps of Evita_UTL as very few that own this phone have come to XDA.
Evita_UTL is only sold in Saudi Arabia as far as we know.
Another user posted a CWM backup of his device here:
http://forum.xda-developers.com/showthread.php?p=46816777
But it only includes data, system, boot and recovery partitions.
It does not include firmware files.
I have asked in that thread if the user can post his radio partition but so far the user has not responded.
You said you bought another Evita_UTL? Why not get the radio partition yourself from that working phone?
twistedddx said:
99.99999% of users on this forum have Evita_UL, not Evita_UTL.
You said you bought another Evita_UTL? Why not get the radio partition yourself from that working phone?
Click to expand...
Click to collapse
Before I break my phone with my CMW recovery from a backup phone
* But take a backup of the partition, not the radio. Not someone who has a radio.
According to Your Loved Ones
i need a radio Evita _ UTL.
One of my friends has the same model.
1 How can I get back my normal phone radio?
2 How can I change my MID?
MID is one partition?
Related
Can someone please help, I'm truly stuck here.
I have followed the guide here..
http://forum.xda-developers.com/show....php?t=1460713
I have managed to remove the revolutionary logo, and all was good. I then attempted to install the following RUU...
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11_M_release_177977_signed
Went through all the prompts but the program "hung" at the sending screen. After around an hour I pulled the usb cable, yay the phone still boots. However I was still at the old HBOOT (cant remember the numbers 6.0.0002 or something ) and with the custom rom.
Though this might be a problem with the RUU... NAY.
I have since tried he following..
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085 AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30. 0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_O2_UK_1.31.206.1_Radio_20.28b.30.0805U_38 .03.02.14_M_release_178935_signed
All with the same results.
So I downgraded the hboot manually to 0.98.0002 and tried them all again. Still no luck.
The reason I have tried the different RUU is that it was originally from carphone warehouse. Their phones are generally unbranded so assumed it would be a standard euro ruu.
Please help.
I really don't get what the problem is. Removing the "Revolutionary" logo isn't the same as being S-ON. But check out the link below to see if it helps.
forum.xda-developers.com/showthread.php?t=1549636
@pttynan
PLease run the fastboot command "fastboot getvar all" remember to remove your imei and serial from your post.
Then I will direct you to a solution
foX2delta said:
@pttynan
PLease run the fastboot command "fastboot getvar all" remember to remove your imei and serial from your post.
Then I will direct you to a solution
Click to expand...
Click to collapse
Hi Fox2delta. The command gives the following.
INFOversion: 0.5
INFOversion-bootloader: 0.98.2000
INFOversion-baseband: 38.03.02.11
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.401.1
INFOserialno: HT13Jxxxxxxxx
INFOimei: 3550670xxxxxxxxx
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4136mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: ENG
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 7b851d36
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: 0.031s
Dont suppose anyone has any thoughts on this? Carphone flat out refused to touch it once the noticed S-OFF
hey, my phone is spoilt and im in desperate help of somebody who can help me with my HTC Sensation XE w Audio Beats.
This is what happened,
i was trying to root my phone with help from hansoon all in one toolkit, after unlocking the device and trying my best to install recovery it comes to no avail, had been receiving error when tryng to install / flash pg58img from hboot ( model id incorrect ) . later after i accidentally click on flash kernel and my phone restarted on its own and got stuck in hboot thereafter. I don't have recovery, no USB debugging mode for me to superCID and ive search the whole entire forum for a cure.. i really wish somebody would help me out here as i really want to get my only phone working and running.
UNLOCKED
pyramid pvt ship s-on rl
hboot. 1.27.0000
emmc-boot
thats all i have, i apprieciate anybody who is willing to help me thank you so much!
yuzhi92 said:
hey, my phone is spoilt and im in desperate help of somebody who can help me with my HTC Sensation XE w Audio Beats.
This is what happened,
i was trying to root my phone with help from hansoon all in one toolkit, after unlocking the device and trying my best to install recovery it comes to no avail, had been receiving error when tryng to install / flash pg58img from hboot ( model id incorrect ) . later after i accidentally click on flash kernel and my phone restarted on its own and got stuck in hboot thereafter. I don't have recovery, no USB debugging mode for me to superCID and ive search the whole entire forum for a cure.. i really wish somebody would help me out here as i really want to get my only phone working and running.
UNLOCKED
pyramid pvt ship s-on rl
hboot. 1.27.0000
emmc-boot
thats all i have, i apprieciate anybody who is willing to help me thank you so much!
Click to expand...
Click to collapse
Go to fastboot on your device
Connect it to pc (usb debugging enable is not required) (phone reads fastboot usb)
Then go to your adb folder on pc
And Type this
fastboot getvar all
Post the complete output except imei and serial number
I'll guide you through the process after this
Sent from my pyramid.. Through blazing fast sonic waves
Just download the latest RUU for your device and run it
Yeah do that lol u can get ur ruu from file factory
Sent from my HTC One S using xda premium
[SOLVED] OP's problem was solved on the irc over 5 hours ago.
Stuck in the same boot loop with my htc sensation
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s
reresp same
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already
xenonxeno said:
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s
Click to expand...
Click to collapse
What is the last rom you had?
You can still go to bootloader thus you can go to recovery...
So enter recovery and tell me whether you are able to e ter or not
Sent from my pyramid.. Through blazing fast sonic waves
w00dberry said:
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already
Click to expand...
Click to collapse
You mean you succesfully flashed RUU and still can't boot?
Sent from my pyramid.. Through blazing fast sonic waves
xenonxeno said:
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s
Click to expand...
Click to collapse
Flash an ICS ROM. Your GB ROM will not boot on 3.32 firmware.
---------- Post added at 11:28 AM ---------- Previous post was at 11:26 AM ----------
w00dberry said:
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already
Click to expand...
Click to collapse
I need a better description of the problem.
"It doesn't work" "I tried multiple RUUs" are useless to me.
What happens when you flash the RUU? Is it successful?
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.53
INFOserialno: SH19sdsdf
INFOimei: 35831gsdgsdfg
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3927mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
I had to s-off this thing with a lot of difficulties, but i still have the bootlooping prob, even after gettign the s-off and super cidd it..
doesnt matter which rom i am using i bootloop, i used a miuiv5 rom for 4 days wihtout bootloop, but then suddenly it started looping badly..
i flashed this file recently (RUU-Pyramid-ICS-hTC-Europe-3.33.401.53-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-280871-signed ) still it loads to htc splash screen and then restart..
dxbboy said:
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.53
INFOserialno: S************
INFOimei: 3************
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3927mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
I had to s-off this thing with a lot of difficulties, but i still have the bootlooping prob, even after gettign the s-off and super cidd it..
doesnt matter which rom i am using i bootloop, i used a miuiv5 rom for 4 days wihtout bootloop, but then suddenly it started looping badly..
i flashed this file recently (RUU-Pyramid-ICS-hTC-Europe-3.33.401.53-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-280871-signed ) still it loads to htc splash screen and then restart..
Click to expand...
Click to collapse
since you are on S-OFF and supercid try to install a gb ruu.exe
also remove your imei and serial number
got confused finding the gb RUU .. i found RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198179_signed.exe i am trying this thinking its a gb rom, and 401.1 is my orginal mid and cid i had .. ..
dxbboy said:
got confused finding the gb RUU .. i found RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198179_signed.exe i am trying this thinking its a gb rom, and 401.1 is my orginal mid and cid i had .. ..
Click to expand...
Click to collapse
it is a gb ruu.exe
ok here is the log, i flashed the ruu mentioned above and now i dont move ahead of htc logo, after that a blackscreen comes, how do i move ahead..
< waiting for device >
INFOversion: 0.5
INFOversion-bootloader: 1.17.0011
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.35.401.1
INFOserialno: SH1gfsdgsdf
INFOimei: 35831sdfgsdfgs
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3800mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 92e53710
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
rzr86 said:
it is a gb ruu.exe
Click to expand...
Click to collapse
now that i flashed the RUU, how do i install
1. 4ext recovery that i was having earlier
2. can my 10.2cm rom or above 9cm work after the flashed RUU ?
dxbboy said:
now that i flashed the RUU, how do i install
1. 4ext recovery that i was having earlier
2. can my 10.2cm rom or above 9cm work after the flashed RUU ?
Click to expand...
Click to collapse
man i think that something goes wrong with a parittion of your device
lets try this
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
before flashing check md5 sums(important)
use md5 checker to ckeck it(it is an exe for pc)
after that install 4ext recovery from here
http://forum.xda-developers.com/showthread.php?t=1631861 (only step 2 nothing else)
then put the cm rom in your sdcard and flash it from 4ext
best wishes
rzr86 said:
man i think that something goes wrong with a parittion of your device
lets try this
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
before flashing check md5 sums(important)
use md5 checker to ckeck it(it is an exe for pc)
after that install 4ext recovery from here
http://forum.xda-developers.com/showthread.php?t=1631861 (only step 2 nothing else)
then put the cm rom in your sdcard and flash it from 4ext
best wishes
Click to expand...
Click to collapse
i flashed the universal .. and now this is the log.. i will try to install the recovery now .. lets see..
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: 11.24A.3504.31_
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOserialno: SH1asdf
INFOimei: 358313asdf
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4015mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Flashed the recovery.. now installing the ROm .. IMPORTANT question .. after flashing the gb ruu , in my bootloader.. instead of locked or reloacked or unlocked.. it shows firmware 3.33 :S
dxbboy said:
i flashed the universal .. and now this is the log.. i will try to install the recovery now .. lets see..
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: 11.24A.3504.31_
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOserialno: SH1asdf
INFOimei: 358313asdf
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4015mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Flashed the recovery.. now installing the ROm .. IMPORTANT question .. after flashing the gb ruu , in my bootloader.. instead of locked or reloacked or unlocked.. it shows firmware 3.33 :S
Click to expand...
Click to collapse
it is the patched hboot which you can use whatever fastboot command you want(you are not limited)
besides you need it to flash 4ext via fastboot command
rzr86 said:
it is the patched hboot which you can use whatever fastboot command you want(you are not limited)
besides you need it to flash 4ext via fastboot command
Click to expand...
Click to collapse
yes i installed the 4ext recovery .. installed the 10.2cm ROm ..it booted firm time without a single loop.. but it says baseband unknown in the settings :S .. hope i can play around with this one a bit ..
thanks .. will let you know if another problem occours
dxbboy said:
yes i installed the 4ext recovery .. installed the 10.2cm ROm ..it booted firm time without a single loop.. but it says baseband unknown in the settings :S .. hope i can play around with this one a bit ..
thanks .. will let you know if another problem occours
Click to expand...
Click to collapse
baseband unknown hmm,
if you have good signal don't change nothing
glad for you mate
rzr86 said:
baseband unknown hmm,
if you have good signal don't change nothing
glad for you mate
Click to expand...
Click to collapse
BOOTLOOP alert!!
well for the first time it booted the best it ever had.. but i powered off my phone , then repowerd it .. and bammmm again bootlop
dxbboy said:
BOOTLOOP alert!!
well for the first time it booted the best it ever had.. but i powered off my phone , then repowerd it .. and bammmm again bootlop
Click to expand...
Click to collapse
try to flash the boot.img of the rom via fastboot command
rzr86 said:
try to flash the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
is it really required as i am already s-off?
plus i tried previously smartflash..
rzr86 said:
try to flash the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
cannot boot ahead of any roms splash screen htc comes, then the startup logo of the rom and bootloop
nops tried all.. havent seen the homescreen yet
dxbboy said:
is it really required as i am already s-off?
plus i tried previously smartflash..
Click to expand...
Click to collapse
dxbboy said:
cannot boot ahead of any roms splash screen htc comes, then the startup logo of the rom and bootloop
nops tried all.. havent seen the homescreen yet
Click to expand...
Click to collapse
i think something goes wrong with boot partition
also disable smartflash. you are on S-OFF
you don't need it
all i can say now is play with different roms and see how they go
but try this first
boot to the bootloader and select reboot
if it fails then boot to recovery
wipe dalvik + cache and then reboot
best wishes
rzr86 said:
i think something goes wrong with boot partition
also disable smartflash. you are on S-OFF
you don't need it
all i can say now is play with different roms and see how they go
but try this first
boot to the bootloader and select reboot
if it fails then boot to recovery
wipe dalvik + cache and then reboot
best wishes
Click to expand...
Click to collapse
nope tried this already .. with cm10 ,cm 9, miui v5, and others..i flashed the superwipe from 4ext aswell but just cant get pass the splash screen of the rom
dxbboy said:
nope tried this already .. with cm10 ,cm 9, miui v5, and others..i flashed the superwipe from 4ext aswell but just cant get pass the splash screen of the rom
Click to expand...
Click to collapse
don't use any superwipe script
use the format all partitions except sdcard option from 4ext
Remove the supercid and try to boot.. Change cid to something generic like HTC__001 (two underscores)
Command Is
fastboot oem writecid HTC__001
Sent from my HTC Sensation using XDA Premium 4 mobile app
Facing same problem... tried all the available solutions but still no luck..
device goes into never ending boot loop and unable to boot recovery from any method... Also installed RUU and it finished successfully but the phone does not want to wake up...
please help...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please someone help!! i have broken my phone bigtime, I unlocked the bootloader the official way and no it will not recognize the sim and wont let me connect to any network!!
any thoughts?
thanks
sounds like radio problem, try to get an app getRIL to match radio with your kernel
ferriscat said:
Please someone help!! i have broken my phone bigtime, I unlocked the bootloader the official way and no it will not recognize the sim and wont let me connect to any network!!
any thoughts?
thanks
Click to expand...
Click to collapse
i think maybe you're already updating incorrect hboot firmware from that site..
to make sure that..just go to your bootloader again and select FASTBOOT..then type fastboot command "fastboot getvar all"..then posting it in here the output from that command..but don't forget to remove your serial number and imei first..to avoid someone can cloning your phone..
JJeamy said:
i think maybe you're already updating incorrect hboot firmware from that site..
to make sure that..just go to your bootloader again and select FASTBOOT..then type fastboot command "fastboot getvar all"..then posting it in here the output from that command..but don't forget to remove your serial number and imei first..to avoid someone can cloning your phone..
Click to expand...
Click to collapse
Hi thanks for the reply ,
here it is,
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno:
INFOimei:
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3997mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Being pretty new, I would hazard a guess at having no baseband being the issue?
please advise thanks
ferriscat said:
Hi thanks for the reply ,
here it is,
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno:
INFOimei:
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3997mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Being pretty new, I would hazard a guess at having no baseband being the issue?
please advise thanks
Click to expand...
Click to collapse
use a ruu.exe
choose the one which corresponds to your firmware(or higher) and cid
http://forum.xda-developers.com/showthread.php?t=1672425
before use the ruu.exe relock first the bootloader
edit: probably there is no ics ruu for orange UK
RUU not working
rzr86 said:
use a ruu.exe
choose the one which corresponds to your firmware(or higher) and cid
http://forum.xda-developers.com/showthread.php?t=1672425
before use the ruu.exe relock first the bootloader
edit: probably there is no ics ruu for orange UK
Click to expand...
Click to collapse
Hi I tired the RUU late last night,
i tired a bout 5 and none of them worked error 131 and error 140,
is there a way to compleaty wipe it all and start again?
thanks
ferriscat said:
Hi I tired the RUU late last night,
i tired a bout 5 and none of them worked error 131 and error 140,
is there a way to compleaty wipe it all and start again?
thanks
Click to expand...
Click to collapse
i can only think now to do a factory reset from settings
rzr86 said:
i can only think now to do a factory reset from settings
Click to expand...
Click to collapse
Hi thanks for trying,
i tried factory reset still no luck, i think the only thing i can do it try get a complete new rom on it.. just got to work out how.
thanks
ferriscat said:
Hi thanks for the reply ,
here it is,
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno:
INFOimei:
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3997mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Being pretty new, I would hazard a guess at having no baseband being the issue?
please advise thanks
Click to expand...
Click to collapse
yap i think that you had already had wrong step..to unlocking your bootloader via htcdev.com...
to fix that...maybe you can try relocking your bootloader first...then flashing a stock RUU again..
but to do that..because i can't find the right RUU for you that have a same version as yours...you can download this RUU (this is a ruu for sensation xe) then modified that RUU file (i mean modified/ change the cid info on android-info.txt in PG58IMG.zip file..change it to your cid) or making a goldcard first to flashing that RUU or else that have a same or higher version than yours...
completed guide to flashing a RUU you can read here.. (you can read at step 4 in that thread)
JJeamy said:
yap i think that you had already had wrong step..to unlocking your bootloader via htcdev.com...
to fix that...maybe you can try relocking your bootloader first...then flashing a stock RUU again..
but to do that..because i can't find the right RUU for you that have a same version as yours...you can download this RUU (this is a ruu for sensation xe) then modified that RUU file (i mean modified/ change the cid info on android-info.txt in PG58IMG.zip file..change it to your cid) or making a goldcard first to flashing that RUU or else that have a same or higher version than yours...
completed guide to flashing a RUU you can read here.. (you can read at step 4 in that thread)
Click to expand...
Click to collapse
or see here
http://forum.xda-developers.com/showthread.php?t=1631861
No Ril
rzr86 said:
or see here
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
So ive tired the above and still no luck , the phone is rooted and is s-off now, after further investigation and using GetRil It is saying I have no RIL , is there an easy way to install it? I thought installing a new rom would do all that?
thanks
ferriscat said:
So ive tired the above and still no luck , the phone is rooted and is s-off now, after further investigation and using GetRil It is saying I have no RIL , is there an easy way to install it? I thought installing a new rom would do all that?
thanks
Click to expand...
Click to collapse
take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1202867
Hi everyone,
HTC One SV LTE (K2_UL) on Orange (it's about 2 years old)
Not rooted
S-ON
Phone was on 4.2.2
USB debugging is not enabled
I'm pretty technical and have scoured forums for the last couple of days and still haven't found a solution to the problem I have with my HTC One SV.
I left the phone on charge overnight and the next day I was presented with a screen asking me to decrypt storage. The phone was never rooted or tampered with.
The problem I have is that I'm unable to factory reset the phone or even get into recovery. Clearing storage doesn't make any difference.
Every time I try, the phone resets and takes me to the "please enter password to decrypt" screen. It appears that the internal SD storage or at least a directory is corrupt.
One solution is to run an Orange RUU to resotre to factory default but I can't fine one anywhere, and I could really do with one.
I'm able to run fastboot commands, but adb does not see the phone as a device.
Can anyone help?
I don't know, how that happened and i don't really have a (easy) solution.
But i guess you won't get it done without an unlocked bootloader and an recovery like Twrp.
A search broughr up similar problems on other devices: http://forum.xda-developers.com/showthread.php?t=2749625
old.splatterhand said:
I don't know, how that happened and i don't really have a (easy) solution.
But i guess you won't get it done without an unlocked bootloader and an recovery like Twrp.
A search broughr up similar problems on other devices: http://forum.xda-developers.com/showthread.php?t=2749625
Click to expand...
Click to collapse
Another thing worth mentioning is that when I try to run fastboot -w I get "Erasing 'userdata' ... FAILED (remote: not allowed)
I'm a pretty technical person (10+Years in IT) but I get the feeling that without the RUU to completely wipe it I won't be able to get this phone fixed.
I don't think, the RUU you are talking is available!
One idea could be:
-Unlock your bootloader
-flash TWRP
-try if you can get something done in recovery, if not,
-flash a stock rom
-get S-off with rumrunner.us
-downgrade hboot
-get Supercid
-run the WWE RUU (and debrand your device)
Is there anyone there who could help me? Does anyone have access or can send me a link to an Orange HTC One SV LTE RUU.exe ??
Well, let's give it a try and ask @djluisbento
Can you obtain a RUU for HTC One SV (K2_ul), Android 4.2.2, Orange/EE branded?
@geileskey
What was the software number your HTC One SV was running on?
old.splatterhand said:
Well, let's give it a try and ask @djluisbento
Can you obtain a RUU for HTC One SV (K2_ul), Android 4.2.2, Orange/EE branded?
@geileskey
What was the software number your HTC One SV was running on?
Click to expand...
Click to collapse
This is what I got from Fastboot:
INFOversion: 0.5
INFOversion-bootloader: 2.21.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.11.61.10
INFOversion-misc: PVT SHIP S-ON
INFOmeid:
INFOproduct: k2_ul
INFOplatform: HBOOT-8930
INFOmodelid: PL8010000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 4162mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-2bb255c2
INFOhbootpreupdate: 11
INFOgencheckpt: 0
thanks,
Mike
geileskey said:
This is what I got from Fastboot:
Click to expand...
Click to collapse
Remove serialno & imei and highlight INFOversion-main: 3.11.61.10
And then lets see, if @djluisbento will answer.
old.splatterhand said:
Remove serialno & imei and highlight INFOversion-main: 3.11.61.10
And then lets see, if @djluisbento will answer.
Click to expand...
Click to collapse
INFOversion: 0.5
INFOversion-bootloader: 2.21.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.11.61.10
INFOversion-misc: PVT SHIP S-ON
INFOmeid:
INFOproduct: k2_ul
INFOplatform: HBOOT-8930
INFOmodelid: PL8010000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 4162mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-2bb255c2
INFOhbootpreupdate: 11
INFOgencheckpt: 0
geileskey said:
INFOversion: 0.5
INFOversion-bootloader: 2.21.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.11.61.10
INFOversion-misc: PVT SHIP S-ON
INFOmeid:
INFOproduct: k2_ul
INFOplatform: HBOOT-8930
INFOmodelid: PL8010000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 4162mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-2bb255c2
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Click to expand...
Click to collapse
I've meant, remove it from the post # 7
old.splatterhand said:
I've meant, remove it from the post # 7
Click to expand...
Click to collapse
Sorry! Just made the edit
old.splatterhand said:
Well, let's give it a try and ask @djluisbento
Can you obtain a RUU for HTC One SV (K2_ul), Android 4.2.2, Orange/EE branded?
@geileskey
What was the software number your HTC One SV was running on?
Click to expand...
Click to collapse
Hello,
I already have the version 3.11.61.10 and 3.11.401.1 and i gonna upload it.
I'm new to this forum, would it be available as a link or a PM?
Many thanks, Mike.
geileskey said:
I'm new to this forum, would it be available as a link or a PM?
Many thanks, Mike.
Click to expand...
Click to collapse
Usually he shared it as a link for all.
@djluisbento
It would be really great if you could also upload the RUU for k2_u with Android 4.2.2 and software number 3.11.401.106 :highfive:
old.splatterhand said:
Usually he shared it as a link for all.
@djluisbento
It would be really great if you could also upload the RUU for k2_u with Android 4.2.2 and software number 3.11.401.106 :highfive:
Click to expand...
Click to collapse
I gonna Upload it for all.
https://drive.google.com/file/d/0B17smFr95pleUEw0SFRzemdhVVU/view?usp=sharing
https://drive.google.com/file/d/0B17smFr95pleZ3VlT1dOZ25fV0E/view?usp=sharing
djluisbento said:
https://drive.google.com/file/d/0B17smFr95pleUEw0SFRzemdhVVU/view?usp=sharing
https://drive.google.com/file/d/0B17smFr95pleZ3VlT1dOZ25fV0E/view?usp=sharing
Click to expand...
Click to collapse
I downloaded both, but the "PL80IMG_K2_UL_JB422_SENSE50_MR_Orange_UK_3.11.61.10_Radio_1.18.40a.00.05_10.81a.40.23_release_340236_signed.zip" only extracts to 98.1K even though the ZIP file is 665MB is there something wrong with the ZIP file?
thanks,
Mike
geileskey said:
I downloaded both, but the "PL80IMG_K2_UL_JB422_SENSE50_MR_Orange_UK_3.11.61.10_Radio_1.18.40a.00.05_10.81a.40.23_release_340236_signed.zip" only extracts to 98.1K even though the ZIP file is 665MB is there something wrong with the ZIP file?
thanks,
Mike
Click to expand...
Click to collapse
I'm also a complete noob to RUU flashing. I thought the ZIPs would contain an executable, but neither of them have an RUU.exe file in them. Am I doing something wrong?
The Ruu is encryted, thats why you can't extract. And you don't need to!
Bootloader must be locked!
Rename the Orange zip to PL80IMG.zip, copy it to external sdcard, boot your phone to bootloader and let it search for files to update. It will ask you, if you wat to flash the zip, confirm with Vol+ and follow the instructions.
@djluisbento
Any news about the RUU for k2_u with Android 4.2.2 and software number 3.11.401.106?
old.splatterhand said:
The Ruu is encryted, thats why you can't extract. And you don't need to!
Rename the Orange zip to PL80IMG.zip, copy it to external sdcard, boot your phone to bootloader and let it search for files to update. It will ask you, if you wat to flash the zip, confirm with Vol+ and follow the instructions.
@djluisbento
Any news about the RUU for k2_u with Android 4.2.2 and software number 3.11.401.106?
Click to expand...
Click to collapse
For the moment i do't have it. only the older version.