I have looked everywhere for an answer.
When I conect my note3 to my windows 8 ta let I get net and can surf,however I can't watch amazon prime if I go to the Adobe flash install page it thinks I am on a Linux machine. It only does this while cone Ted via usb.
I have even tried user agent switching in chrome,ff, and ie.
Any suggestions would be great.
Related
It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.
I have not had a problem tethering my tp2 with verizon using Win XP Pro x64, or XP home x86.
The way that works for me is:
Run the internet sharing program, Not the VZW access manager crap.
Tell it to connect
After it connects, then plug in usb from pc to phone
The pc recognizes it as another network connection
It gets its IPs and all no problems.
Open up your choice of browser and off you go.
I have never had to install drivers to do any of this, and also it doesnt use active sync when doing it this way.
hope this helps.
I pulled the internet sharing program out of the Windows folder (made a shortcut ). The problem is when I connect to the PC. The install new hardware wizard comes up for Generic RNDIS device. This is after I clicked "Connect" in IS. I have clicked cancel , then it says install failed, your new hardware may not work properly. IS disconnects and Activesync starts syncing. I tried it the first way , letting AS sync once then turning IS on, same problem.
I dont use VZ Access Manager. I was forced to uninstall that and Activesync when suddenly the PC wouldnt recognize anything while the phone was plugged in. After that, the phones internet wouldn't work either so I then had to restore the phone to factory defaults via a hard reset. After resetting, I found that 228 wouldn't program the phone. The next day I nearly took it in to VZW. tried 228 again and it worked finally. Got my phone internet back and I'm back to trying to get IS working. I didn't install VZAM, but I do have the USB driver installed.
Are there certain files that are needed on XP for this? I am still running 32bit XP Pro if that makes any difference. Service packs maybe? I'm up to the point where I'm about to go out and buy a WiFi card and try connecting it that way. Something Has to work here.
The generic RNDIS ( Remote Network Driver Interface Specification ) drivers are part of the ActiveSync install and are needed for TCP/IP between the PC and the phone.
Install ActiveSync.
Plug in the phone.
Don't cancel the New Hardware Found - let it install the drivers.
Set up a sync relationship with the PC if you like - not needed.
When you tell ICS to connect, it should drop any other connection to the PC (Hard Drive, Active Sync) and make the Windows connect sound. Then you should see the network negotiation icon in the System Tray as it sets up the internet sharing.
When I dont cancel New Hardware wizard, it doesn't find any drivers to install. This is if I let it search for drivers automatically, and after Activesync is installed. See what the problem is here? What should normally work, doesn't. Are there key files missing in the copy of Activesync that is included on the CD from VZW? What am I missing here? When I turn Internet sharing on, on the phone, it always says something like ''Check USB cable connection'' and it never changes. The hardware wizard never finds the drivers, and when I try to point it towards driver files, it says theres an entry missing and wont install.
Grr..if you read through the other thread link above, you know how long i have been trying to get it to work. Frustrating!!
Wallking HotSpots
THE-COPS said:
It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.
Click to expand...
Click to collapse
I myself use WalkingHotSpots http://www.walkinghotspot.com/. It is 24.99 for a lifetime license and currently they allow you to use the license over and over when you upgrade your phone. I used it first when I had the Touch Pro and now I am using it with my TP2. It is a program that allows me to add up to 5 connections and use my TP2 as a Hotspot. Now of course it would requre you to have your TP2 connected and charging via wall outlet. But basically it will allow me to connect 3G using my WiFi. I just used it Tuesday night while at church to connect back to my business server and resolve some databases issues. My laptop was running at an excellent speed and I was online over 2 hours with no drop connections. The walking hotspot website says that it will not work with Verizon but I can personally say that it does. I do not have the Internet connection software installed on my TP2 so I am going all WiFi for my connection. I added a password and name for my Walking HotSpot so no random joe could just drive by and conect lol and I was up and running in about 10 minutes. They don't offer a free tiral but you can try it for 1 month for 6.99 and if it doesn't work you will not have wasted 25.00. Just choose to use it for a Touch Pro and you should be able to get the download. I have had it over a year now and it has come in very handy especially when I go home to visit Mom as she has no internet and walking hot spots runs my husband's laptop and mine without any issues. So whatever you ultimately do I hope you get it worked out
WMWifiRouter
I use WMWifiRouter on my phone for internet sharing. It works great. This may be an alternative for you.
http://www.wmwifirouter.com/
(the site appears to be down at the moment)
I just loaded a program called PdaNet and was really amazed at how easy it was to install. Hooked up on Verizon @ 2.4mbps - actually faster than my DSL!!!
I've only tried it a couple times but I recommend going to here http://www.junefabrics.com/pdanet/index.php and download a trial version.
WMWiFiRouter
I second the vote for WMWiFiRouter. I used it on my Mogul and now on my TP2 (both with Sprint) -- no issues whatsoever -- more importantly, no tethering fees.
For me now, when i use USB or Bluetooth over ICS, my browser has to go to 3g.vzwdun.com. It didn't use to do that before. How can I keep the device from reporting that I'm tethering...
This question has probably been asked a million times but i couldn't find an answer.
On my HTC Hero (android 2.1), there was an option to tether once you plugged the phone into your computer. This could also be used as a wireless receiver for a desktop computer lacking a wireless access card. I was using this as a last resort after losing dozens of Ethernet cables to vermin under the house. Basically the idea was: connect to your homes wireless router on the phone, then plug the phone into the usb slot of your computer and it would share that wifi connection with your computer. Recently I have switched over to the all powerful HTC HD2 and I am realizing there is no way to do this, that I can tell, with the stock phone. Is there something I'm missing?
I have tried using the Internet Sharing option, as well as the CMInternetSharing.cab I downloaded from you guys, and neither seem to bring this ability to the table. Is there an app out there that can solve this problem?
Ussually a Custom rom will fix this most have the Internet share or WiFi router but you need to HARDSPL your phone. also theres a way for you to do it just deleting your or editing your REGISTRY.
---------------------
Here is the Thread for the roms for your phone
http://forum.xda-developers.com/forumdisplay.php?f=534
and this is the rom I Recomend
http://forum.xda-developers.com/showthread.php?t=591784
use the Cookie GTX (white theme)
Follow the intructions on how to install it(rom) also onces done click on your Window button>tools>WiFi Router and you can use your phone as a wireless router also if you connected your phone Via usb to your conputer you can connect using internet sharing.
fixed the problem
WMWifiRouter has a wifi to usb mode.
will definitely be buying it after my trial runs out.
hi all i am somewhat new to rooting my phone. i love it makes my phone worth the price i paid for it. however i have a wireless tether which i use for my laptop but i was looking around for a tether that i can get internet access on through the USB. sadly i havnt found anythin gif anyone knows about anything that would be a HUGE help. I have the EVO 4G running on superuser, and using windows 7. I need a USB tether for my desktop computer so i can access the internet on my xbox from my desktopcomputer. so what im basicly looking for help with is an app program or what ever it takes to beable to use a USB (not wireless) and get the internet on my desktop computer which cannot pick up a wifi signal.
thanks all again, I OWE YOU one
You can use this: https://market.android.com/details?id=com.pdanet&hl=en or this: https://market.android.com/details?...EwOSwiY29tLm1zdHJlYW0uZWFzeXRldGhlcl9iZXRhIl0.
FYI: Root is not needed (but it doesn't affect it either way)
My question is, what would you do in my situation?
My Xoom connected to my computer (HP Pavilion dv6000) (Windows Vista) once before in past times. It will not connect anymore, I have done everything possible that people have said to do. Still in the same situation.
I connected it to my mothers Toshiba Satellite U505-S2950 (Windows 7)after installing Moto software, and its working perfectly.
Should I re-install Windows/Re-set to default? I've tried everything, from installing drivers, to changing permissions, to installing adb, blah blah blah.
I just recently found DropBox which I am using now, until I can figure out exactly what to do with my HP.
Anyone? TBH: I don't want to use my moms laptop every time I want to transfer a movie to my Xoom, rather it be mine.
Appreciation is high.
-Nic
So I guess you are using your original Xoom USB cable, and have tried different USB ports (like the ones on the back if you have a tower), you tried with debugging on and off, you've tried with the USB plugged into the Xoom 1st and then into the computer as well as the other way around...do you have Windows Media Player (9?) installed on your pc? It seems it needs it to connect....
Its not a solution to USB woes as I reckon I am in the same position with XP Windows machines, but an alternative.
Why not run a FTP Server on either your Laptop or your Xoom....
I doubt its as fast as USB transfer but may be quicker than Dropbox (definitely quicker for me in the UK with cruddy upload speeds !!!)
I use FTPServ on the PC and SwiFTP on the Xoom as the FTP Server - I just switch each one on when needed depending on which copy method I feel like using
I use Total Commander for the FTP Client on the Xoom.
Yuccaman said:
Its not a solution to USB woes as I reckon I am in the same position with XP Windows machines, but an alternative.
Why not run a FTP Server on either your Laptop or your Xoom....
I doubt its as fast as USB transfer but may be quicker than Dropbox (definitely quicker for me in the UK with cruddy upload speeds !!!)
I use FTPServ on the PC and SwiFTP on the Xoom as the FTP Server - I just switch each one on when needed depending on which copy method I feel like using
I use Total Commander for the FTP Client on the Xoom.
Click to expand...
Click to collapse
Interesting idea...
This I suppose could be seen to be quite drastic, but it will fix 99.9% of all USB related issues across windows OS's
*** Read first before actioning ***
>Right click My computer and manage, you are using Vista? So will probably need to run as admin.
>Go to device management and expand Universal Serial Bus controllers.
>Ok delete the lot
>Yup delete the lot
What this means is that it should now prompt you to reinstall the drivers for any USB device plugged in to the PC, yes you may find that you have to unplug and replug in your keyboard and mouse to re-install the drivers for those devices. But it should also re-install the Motorola Xoom drivers also.
At the end of the days its quicker to try this than re-install Windows
Unfortunately not every USB Root Hub or Host controller displays what it actually is, some do but that's a case of right clicking each one to see what it is. If for example it states that its a mouse then perhaps don't delete that one but hopefully you get my drift.
Nickitt said:
My question is, what would you do in my situation?
My Xoom connected to my computer (HP Pavilion dv6000) (Windows Vista) once before in past times. It will not connect anymore, I have done everything possible that people have said to do. Still in the same situation.
I connected it to my mothers Toshiba Satellite U505-S2950 (Windows 7)after installing Moto software, and its working perfectly.
Should I re-install Windows/Re-set to default? I've tried everything, from installing drivers, to changing permissions, to installing adb, blah blah blah.
I just recently found DropBox which I am using now, until I can figure out exactly what to do with my HP.
Anyone? TBH: I don't want to use my moms laptop every time I want to transfer a movie to my Xoom, rather it be mine.
Appreciation is high.
-Nic
Click to expand...
Click to collapse
/this happened to me aswell when i was running vista, if you havnt already tried then go check this site out tiny.cc/wk2fdw and download the file which will run a check and tell you what to do next
/if that doesnt work google "windows vista usb.inf and go from there, hope this helps
Hi guys,
So I have a new challenge here... I have my new S8 and I don't plan to root it...yet (at least till I find an easy and reliable step by step procedure)...I wanted to have tethering capabilities so I installed PDA net wich worked fine with my laptop through USB cable. But I want to use it for my Fire TV. I installed the app in both my S8 and fire TV, and was able to connect via WiFi but with problems. It shows as Connected, but says Internet is not available. Any suggestions? I tried USB and didnt work either. They are both Android platforms so I figure there must be a way. Thanks in advance!