It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.
I have not had a problem tethering my tp2 with verizon using Win XP Pro x64, or XP home x86.
The way that works for me is:
Run the internet sharing program, Not the VZW access manager crap.
Tell it to connect
After it connects, then plug in usb from pc to phone
The pc recognizes it as another network connection
It gets its IPs and all no problems.
Open up your choice of browser and off you go.
I have never had to install drivers to do any of this, and also it doesnt use active sync when doing it this way.
hope this helps.
I pulled the internet sharing program out of the Windows folder (made a shortcut ). The problem is when I connect to the PC. The install new hardware wizard comes up for Generic RNDIS device. This is after I clicked "Connect" in IS. I have clicked cancel , then it says install failed, your new hardware may not work properly. IS disconnects and Activesync starts syncing. I tried it the first way , letting AS sync once then turning IS on, same problem.
I dont use VZ Access Manager. I was forced to uninstall that and Activesync when suddenly the PC wouldnt recognize anything while the phone was plugged in. After that, the phones internet wouldn't work either so I then had to restore the phone to factory defaults via a hard reset. After resetting, I found that 228 wouldn't program the phone. The next day I nearly took it in to VZW. tried 228 again and it worked finally. Got my phone internet back and I'm back to trying to get IS working. I didn't install VZAM, but I do have the USB driver installed.
Are there certain files that are needed on XP for this? I am still running 32bit XP Pro if that makes any difference. Service packs maybe? I'm up to the point where I'm about to go out and buy a WiFi card and try connecting it that way. Something Has to work here.
The generic RNDIS ( Remote Network Driver Interface Specification ) drivers are part of the ActiveSync install and are needed for TCP/IP between the PC and the phone.
Install ActiveSync.
Plug in the phone.
Don't cancel the New Hardware Found - let it install the drivers.
Set up a sync relationship with the PC if you like - not needed.
When you tell ICS to connect, it should drop any other connection to the PC (Hard Drive, Active Sync) and make the Windows connect sound. Then you should see the network negotiation icon in the System Tray as it sets up the internet sharing.
When I dont cancel New Hardware wizard, it doesn't find any drivers to install. This is if I let it search for drivers automatically, and after Activesync is installed. See what the problem is here? What should normally work, doesn't. Are there key files missing in the copy of Activesync that is included on the CD from VZW? What am I missing here? When I turn Internet sharing on, on the phone, it always says something like ''Check USB cable connection'' and it never changes. The hardware wizard never finds the drivers, and when I try to point it towards driver files, it says theres an entry missing and wont install.
Grr..if you read through the other thread link above, you know how long i have been trying to get it to work. Frustrating!!
Wallking HotSpots
THE-COPS said:
It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.
Click to expand...
Click to collapse
I myself use WalkingHotSpots http://www.walkinghotspot.com/. It is 24.99 for a lifetime license and currently they allow you to use the license over and over when you upgrade your phone. I used it first when I had the Touch Pro and now I am using it with my TP2. It is a program that allows me to add up to 5 connections and use my TP2 as a Hotspot. Now of course it would requre you to have your TP2 connected and charging via wall outlet. But basically it will allow me to connect 3G using my WiFi. I just used it Tuesday night while at church to connect back to my business server and resolve some databases issues. My laptop was running at an excellent speed and I was online over 2 hours with no drop connections. The walking hotspot website says that it will not work with Verizon but I can personally say that it does. I do not have the Internet connection software installed on my TP2 so I am going all WiFi for my connection. I added a password and name for my Walking HotSpot so no random joe could just drive by and conect lol and I was up and running in about 10 minutes. They don't offer a free tiral but you can try it for 1 month for 6.99 and if it doesn't work you will not have wasted 25.00. Just choose to use it for a Touch Pro and you should be able to get the download. I have had it over a year now and it has come in very handy especially when I go home to visit Mom as she has no internet and walking hot spots runs my husband's laptop and mine without any issues. So whatever you ultimately do I hope you get it worked out
WMWifiRouter
I use WMWifiRouter on my phone for internet sharing. It works great. This may be an alternative for you.
http://www.wmwifirouter.com/
(the site appears to be down at the moment)
I just loaded a program called PdaNet and was really amazed at how easy it was to install. Hooked up on Verizon @ 2.4mbps - actually faster than my DSL!!!
I've only tried it a couple times but I recommend going to here http://www.junefabrics.com/pdanet/index.php and download a trial version.
WMWiFiRouter
I second the vote for WMWiFiRouter. I used it on my Mogul and now on my TP2 (both with Sprint) -- no issues whatsoever -- more importantly, no tethering fees.
For me now, when i use USB or Bluetooth over ICS, my browser has to go to 3g.vzwdun.com. It didn't use to do that before. How can I keep the device from reporting that I'm tethering...
so i have a bad wireless card in my laptop and i was trying to use my tilt connected via usb to pick up my linksys wireless signal. there wasnt a problem in teh world doing it with xp, i just pluged it in, installed activesync and off i went... but now with win7... lets just say this hasnt been my first attempt... anyone have any ideas or insight on this?
no one has any idea?
Activesync wouldn't have allowed you to do that on XP, only to use the laptops wireless internet on your phone.
Easiest and most reliable way of using your phone as a wifi dongle is WMWifIRouter but it isnt free. There are free alternatives such as ICS Control, but I never got them to work.
I want to know if there is a way to use an android device as a wireless adapter? Not wireless tethering of your data connection but the ability to use the wifi connection on your pc.
Sent from my DROID3 using Tapatalk
Turn your data off and turn on your WiFi, connect to the desired network and try to tether via usb to your phone. This should hopefully bridge your connection if you have an aosp ROM. I'm not sure about sense, as I've never tried it on a sense ROM before.
Sent from my PG86100 using XDA App
So you mean download the wirless tether app and use it while data is off? And you can do it via usb?/ I've never used data tethering so idk im a noob
Sent from my DROID3 using Tapatalk
He meant to say, connect to wifi and in settings there will be an option to tether via usb
Although i am also not sure about sense roms
Or you can use a market app
There are many, Easy Tether will do the job
Connect to the wifi network and then use usb tethering
okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk
Moved to proper section
yus4eel said:
okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.
Need for same
Need an expert here!
what we look for is using android phone to connect other devices not only to internet but also to each other .
We could do it with our modem,but with tethering is like a hotspot , every device can connect internet but cannot see other devices.
Everywhere i looked was explainin "how to tether" which is built in android 2.2 already.
Helps will be highly appreciated
Is it too simple?
I had trouble getting USB tethering on my macbook, not my PC, but:
I searched the market for USB tethering.
and with "Easy Tether lite" (the first app in the search results; there are other options, I tried this one first and it worked great).
I installed on my phone, ran it, followed the wizard, had to install USB tethering drivers for OS X at some point.
Now:
Phone getting WiFi from my router and entering my computer via usb.
I even set it up now to send this very post!!
cheers,
-nerB
EDIT: (Hmm, your syntax is kind of shaky, original poster... You don't mean use the computer as a wireless adapter for your phone do you?? that would be internet pass-through, yes? I think you do mean USB tethering but using a WiFi source, not the mobile connection. Is this as simple as hooking up a usb data tether but using the WiFi instead of 3G from your phone, such as to use a dingy laptop without wireless to get the WiFi in a Starbucks/etc/etc? Hmm.
Otherwise, your phone is not a WiFi wireless adapter, it has one that your phone OS connects to, which then "usb tethers" to computer...
I've never even seen a usb cable that connects a mobile phone to a mobile phone. Haha. I suppose if you had one, you should be able to USB tether from one phone and Internet Pass-Through on the other.....:/ )
Check out this thing called Bluetooth for that. It works wonders.
Sent from my ICS loving Evo 3D.
solution without additional software while having cyanogenmod
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
yet another reason to consider CM flash
Just some questions...
OK GUYS. thnx for the usefull info.
Now i wanna say that suppose we have this wifi dongle for connecting to computer..(see photo attached) we use this for connecting WIFI to our PC's. RIGHT???
NOW i wanna ask if it is possible that we can use our phone instead of this ""DONGLE"" as wifi signal catcher. NEITHER USB NOR WIFI TETHERING(like easy tether lite or many other options available on XDA.) [people are actually asking for "THIS OPTION" so we don't have to spend another 20-30 bucks but they ends up with USB or WIFI tether)
we connect our phone to PC and Search for WIFI Signals on PC... NOT on the phone itself.
please guys, if any one know how to do this then please share. OR please tell if it is possible or not..
thnx...
bump
pump
me too.
I want pc look the android devices (via usb) such as "usb wifi" and control the wifi (of android)
Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
Well sir thanks it surely did help some one out and in this case its me so thanks again ....
using linux
im wondering is there anyway to use my phone as my wifi adpater so that ill install kali linux on my pc and receive wireless ssid
Use phone as wireless adapter for pc
just connect to wifi network in android and connect that android to pc with data cable and enable usb tether in android phone
MikeCriggs said:
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.
Click to expand...
Click to collapse
sorry for bringin up a old thread
but man ure a life saver my dongle died on one of my pcs and i used the same method for my LG G4 works like a charm
thank you a million times man
I actually just tried the above program and it works. It has serious limitations if your not getting the paid version. Blocks a bunch of webs sites and all secure ones. It does work though. I really wish Verizon would not have found it necessary to remove wifi sharing over USB for some dam reason. The S7 I have, had it factory and they removed it. Not sure why? Seeing how it does not have a fuking thing to do with the mobile network. I can actual tether my computer by USB using mobile network and can't from my wifi. Can already bypass they're tethering fee.
I will continue reading and searching till I find a way to undo or work around big reds unnecessary removal of this feature. Even if it involves crawling a 1000 miles on my hands and knees, on broken glass to find some big wig and beating the reversal out of him with the very S7 I'm typing this on.
What I neeed is is an iphone or an android device to acts a wifi adapter/dongle so I can view a list of available access points on my computer and connect to them.
Does this make sense?
I'm sure this is possible.
Does anyone have any idea?
Ay help help? Thanks!!
houseonfire said:
What I neeed is is an iphone or an android device to acts a wifi adapter/dongle so I can view a list of available access points on my computer and connect to them.
Does this make sense?
I'm sure this is possible.
Does anyone have any idea?
Ay help help? Thanks!!
Click to expand...
Click to collapse
What exactly are you trying to do?
Are you trying to tether your computer through your phone (i.e. connect the computer to the phone via USB cable, and then use the phone's WiFi / 3G connection on your computer)?
Or just use the phone as a wifi finder (which seems odd because if your computer has WiFi then it should be able to see the access points on its own..)?
I'll assume you're going for the first one because the second one doesn't make any sense. You should search the forum for "USB tether" .. although since you're asking for iPhone or android, it seems like you don't have a device yet...
mdizzlew said:
What exactly are you trying to do?
Are you trying to tether your computer through your phone (i.e. connect the computer to the phone via USB cable, and then use the phone's WiFi / 3G connection on your computer)?
Or just use the phone as a wifi finder (which seems odd because if your computer has WiFi then it should be able to see the access points on its own..)?
I'll assume you're going for the first one because the second one doesn't make any sense. You should search the forum for "USB tether" .. although since you're asking for iPhone or android, it seems like you don't have a device yet...
Click to expand...
Click to collapse
I have no WiFi adapter. I want to use an android/iPod as a wifi adapter so I can see possible connections listed on the PC (providided by the ipod or android device)..
I build a WiFi antenna that i want to put the device in, i hook the phone/ipod to the computer, then on the computer i find the best wifi point to connect to and connect to it.
I dont want to see the listings for the access points on the device, i want to see and connect to the listings on my computer.
Shameless bump.
I basically want my old android phone or old iPod touch to act as a wifi adapter. That's it.
You mean a hotspot?
Hello guys
I just wanted a help
My PC doesn't have WiFi
But I wanted to use Shareit on it.
So I was planning to use my another phone WiFi as a WiFi dongal to my PC
Is there any way to do so?
Thanks in Anticipation
I'm not sure you can do that, but if you could, it would probably involve USB tethering which should get the job done. Just do a search for "tutorial USB tethering" or something similar and you'll get loads of guides.
It just tethers your data from your phone to your computer through the USB cable which is more dependable and consistent in my experience. Depending on your phone and carrier, you may be able to just turn it on in your settings with the appropriate drivers on the computer. My phone doesn't have it by default so I use FoxFi which has support for WiFi (which you don't have), Bluetooth and USB tethering.