PRL doesnt stick? - Nexus 5 Q&A, Help & Troubleshooting

running the latest CM11 nightly, update PRL function does not work. so i grabbed a stock rom, flashed it updated prl (theres a new one) and restored my cm11 backup. guess what, prl did not stick, its back to 55016 instead of 55017. isnt it supposed to? why i cant update prl?

Related

[How To] Update PRL in official Froyo OTA

Hello,
I upgraded to the unofficial leaked HTC froyo and desperately wait both root and possibly upgrade to OTA 2.2 (or downgrade.) I went to do the prl hack described in another thread which was exceedingly useful and found that ##PRL# doesn't work. This has been commented on a few times in various threads in the last few days.
Someone in one of the threads briefly commented on it but the knowledge doesn't seem to have been picked up by everyone.
I was able to update my prl to a file of my choosing using the demo of CDMA Workshop. Follow the instructions to setup CDMA Workshop in the thread covering how to get your MSL#. After getting your Evo running and connected to CDMA Workshop, go to the "Other" tab, click write in the PRL subcategory and select the prl file located on your computer. Disconnect, restart your phone and it should say the new prl# in the About Phone stuff.
edit: i am retarded
^i couldnt agree more.
Sent From My Evo Running Froyo Rooted
can OP or mod change the title of this to [HOW TO] Change PRL on FroYo or something similar please. slightly uninformative title currently. thanks.
edit: nice title change
This tutorial is in the "General" Section
Just to let you guys know...this method doesn't work if you're running CM6. When trying to write the PRL, you get this error: "60669.prl is not a valid PRL file"
12MaNy said:
Just to let you guys know...this method doesn't work if you're running CM6. When trying to write the PRL, you get this error: "60669.prl is not a valid PRL file"
Click to expand...
Click to collapse
yah, because CM6 isn't based off of the OTA 3.26.651.6 build.
anything based off of that build should have no issues.
this is why i stick to ROMs that are really close to stock. never have any issues.
I'm on Flipz Rom and my. Prl updated just fine
sent with my evo from a secret place
i just did a nandroid backup of my cm6 install. flashed over the rooted froyo official long enough to update the PRL then restored the cm6.
CM6 PRL update
gx1400 said:
i just did a nandroid backup of my cm6 install. flashed over the rooted froyo official long enough to update the PRL then restored the cm6.
Click to expand...
Click to collapse
I did the same thing to update PRL. I started out running CM6 nightly builds, currently running CM6 RC1. Did a nandroid backup, then restored Fresh 1.0.1 and updated PRL from 60662 to 60668. After that I restored CM6 RC1.

[Q] Help. Flashed my Telus Nexus S with ATT firmware, now network type shows GPRS.

I'm (obviously) a bit of a newb when it comes to android, and I was flashing back from cm7 to see how it was done. When I reinstalled GRJ22, everything was working fine. I then downloaded and flashed the OTA update to GRK39C (or so I thought). It turns out it was the update to GRK39F, which apparently is ATT or GPRS specific. My phone now thinks it's on ATT and is trying to use GPRS.
I'm on Telus in canada, and use HSPDA.
The phone was also showing baseband version I9020AXXKF1, it should be I9020AUCKD1.
I've tried restoring from a backup, flashing back to cm7 and to stock fw's, and even tried flashing the radio.
My phone still shows GPRS, and now baseband version shows I9020AXXKD1.
Is there any way to fix this? I hope someone here is knowledgeable about this...
That baseband is associated with the i9020t, or the t-mobile variant. The canadian nexus s is identical to the at&t version.
There is a sticky with all the roms. Use it and get the right rom installed
Unfortunately, the ROM I need seems to be one of the missing ones. Is there any way to backup the radio from my wife's (identical) phone and flash it to mine?
It looks like the file I need is 5282b5b3eb74.signed-sojua-ota-178324.5282b5b3.zip but I'm unable to locate a working link for the file. Can anyone tell me if this is correct and/or provide a live link?
Actually that particular one you want has broken tethering... This is a dump is the 2.3.4 with I9020AUCKD1 radio from my US import i9020a tested and working on SaskTel HSDPA+.
http://dl.dropbox.com/u/7812800/Stock-GRJ22-i9020A-unsigned.zip (will need to be flashed via CWM Recovery)
Thanks! I got it working by flashing the unsigned ROM in the sticky thread, and I'm running cyanogenmod 7.1 RC now. I'll keep the stock ROM on file just in case though...
r.asimi said:
Thanks! I got it working by flashing the unsigned ROM in the sticky thread, and I'm running cyanogenmod 7.1 RC now. I'll keep the stock ROM on file just in case though...
Click to expand...
Click to collapse
Cool... I hope it works out well for you.
btw i got a rooted version of the stock 2.3.4 if you are interested as well.
So, for some reason flashing with your ROM set my phone to UMTS. Can someone refer me to a howto to backup a full ROM image from a phone, since my wife's is working fine and is on the right type of network.

[Q] Can't Connect To Mobile Data

Hi, I have an HTC Sensation running Cyanogenmod 9's June 14th Nightly. Originally I was running the June 15th Nightly, but I realized that my data was not connecting.
I was using WIFI and that worked perfectly, but when I was out of range, my phone attempted to connect to T-Mobile's network but failed to do so. The HSPA+ icon flickers on and off while the bars remain full and white. I was still able to make calls but I have no data connection. This was originally on the June 15th CM9 nightly. I flashed back to the June 14th nightly and the problem persists. I have also tried re-booting my phone several times.
I flashed the stock ROM with the 1.17 radios and Data worked but when I went back to ICS ROMS with the latest radios it didn't work. I also tried installing the latest RILs and Data still doesn't work.
Here is how my homescreen looks:
http://gyazo.com/8e4c50313720c6ce34434292d6616a2e
Any help would be greatly appreciated.
I had the same problem using my new Miui Rom (it's based off cm9 nightly) . I used titanium backup to clean out my Roms and just like you I realized that my data keep starting and cutting out. I backed up everything so i re-installed everything one by one until something called Key Chain 4.0.4 finally was found as the missing piece. You might want to install titanium backup and check for that app (key chain)
Mine did that when I was trying to use different APN's. The only one that allows me to connect is wap.cingular
You could check that, I guess. Otherwise, try opensensation and/or a different radio.

[Q] Lost all data/mobile connectivity after flashing CM10.1.0.1

I then flashed other modems, versions of CM10.1 and no luck. I odin'd back to stock 4.1.1 and I am still disconnected to the mobile network. What do I do
Please Help
jbjarko said:
I then flashed other modems, versions of CM10.1 and no luck. I odin'd back to stock 4.1.1 and I am still disconnected to the mobile network. What do I do
Click to expand...
Click to collapse
I am also having the same problem I went from MOAR rom to CM 10.1 and my phone says roaming. I try to call and it tells me to call Verizon. SO I went back to MOAR rom and I still have the same problem
zavala_android said:
I am also having the same problem I went from MOAR rom to CM 10.1 and my phone says roaming. I try to call and it tells me to call Verizon. SO I went back to MOAR rom and I still have the same problem
Click to expand...
Click to collapse
Same issue here. Had to restore to previous.
Check Q&A and Dev threads.
The .1 breaks data. Either go back to release, RC5 or go to Nightlies.
I went to nightlies and i'm working fine now. (and get the new features)
My problem is I flashed back to stock via odin and I still have no data, at all. It's roaming...Will attempt to reflash tonight.
Alright I'm on the latest OTA build, MF1 I believe, still roaming only. Where should I go from here, what should I flash to hopefully get rid of this. *228 doesn't work. *2767*3855# says my phone is not authorized to make this call, etc...I'm stuck.
Nevermind, I did a full reset and have all my data back. I'm on the latest OTA, can I root, unlock, and proceed as normal from this build?

[Q] viperone m8 no connectivity 1.4, 1.5 or 1.6

Rooted, s-off vzw m8. After a fresh install I have no network connectivity. I try to alter the default APN but as soon as I change the MCC/MNC numbers the APN disappears from the APN list. This includes any new APN I make as well. Any ideas?
I can use other ROMs just fine, but any time i try to use ViperRom i have no connectivity.
i've tried dirty flashing, clean wipe, and ota updates from older versions. nothing seems to get this working.
screenshots at
oi59.tinypic.com/24x0vlw.jpg
oi59.tinypic.com/2j3mc14.jpg
oi62.tinypic.com/8y8c4l.jpg
the solution was to use a different version of twrp. i was originally using 2.7.0.3 which i can't seem to find anywhere and is now making me wonder if that was even an official release of twrp.

Categories

Resources