Related
Hello everyone, I considered putting this in the marketplace but it makes 100% more sense to have it here.
I'm selling my faulty nexus one for spare parts so if anyone needs a part of the phone (except the PCB that the microusb sits on)
give me a PM and we can come to some sort of arrangement, obviously undercutting ebay prices lol.
for example... lcd replacement, digitizer or camera, speaker, volume buttons etc.
I've got a weird one to ask about....
What about the bottom soft touch cover (that goes over the usb port)?
do you have the little black plastic piece that covers the bottom pcb? its got the little vibrator connected to it.
Mine is like slowing down and isnt as powerful and i think its the reason for my haptic feedback dying
MaximReapage said:
I've got a weird one to ask about....
What about the bottom soft touch cover (that goes over the usb port)?
Click to expand...
Click to collapse
Could you get a picture of a nexus one and draw on paint what bit you mean? lol
Hi, may I have the camera module, the flash module and the power/volume buttons? how much for them? also, can u send them to colombia? thx!
If not, I got a friend in USA who will receive them!
edit: and usb cable and charger!! I know, I've been very bad with my N1
Rikarudo said:
Hi, may I have the camera module, the flash module and the power/volume buttons? how much for them? also, can u send them to colombia? thx!
If not, I got a friend in USA who will receive them!
edit: and usb cable and charger!! I know, I've been very bad with my N1
Click to expand...
Click to collapse
PM me so we can sort it all out
Megacamz said:
Hello everyone, I considered putting this in the marketplace but it makes 100% more sense to have it here.
I'm selling my faulty nexus one for spare parts so if anyone needs a part of the phone (except the PCB that the microusb sits on)
give me a PM and we can come to some sort of arrangement, obviously undercutting ebay prices lol.
for example... lcd replacement, digitizer or camera, speaker, volume buttons etc.
Click to expand...
Click to collapse
Hi Magacamz! I wonder if you still have your LCD Replacement? For how much are you expecting to sell it? Would you send it using USPS International? If positive, we can arrange using Paypal or something similar...
Tnks!
gciola said:
Hi Magacamz! I wonder if you still have your LCD Replacement? For how much are you expecting to sell it? Would you send it using USPS International? If positive, we can arrange using Paypal or something similar...
Tnks!
Click to expand...
Click to collapse
i'll take second in line if he doesn't take this.
Megacamz said:
Could you get a picture of a nexus one and draw on paint what bit you mean? lol
Click to expand...
Click to collapse
It is literally the piece that goes over the USB port and gold power connectors on the bottom of the phone. It's the same material as the battery cover.
I dropped my three-week old HTC one X on driveway by accident. The screen was shattered like a spiderweb. So I ordered a HTC One X screen/digitizer replacement from Amazon.
Today I tried to follow each step described in youtube ( http://www.youtube.com/watch?v=ceHw6mezG60). In the last step when tried to separate glass screen from LCD, the LCD was ruined.
The glass and LCD were glued very tight. In my opinion, it is almost impossible to separate them safely. There are some differences in cables and connectors between the US version and the one showed in youtube (i assume it is the international version). There is one cable in the AT&T version that is very hard to disconnect.
Just to be clear, I consider myself very handy in electronics. I hope you can learn from my lesson. Tomorrow, I am going to send the phone to HTC repair center. Since I voided the warranty by disassembling it. I have no idea how much they will charge me.
i learned my lesson on this with a friends Inspire 4G...I have changed many many iphone screens, but the Inspire was a whole different ball game, and i would expect the One X to be even worse.
You are right, pay someone to do it.
jjss4433 said:
I dropped my three-week old HTC one X on driveway by accident. The screen was shattered like a spiderweb. So I ordered a HTC One X screen/digitizer replacement from Amazon.
Today I tried to follow each step described in youtube ( http://www.youtube.com/watch?v=ceHw6mezG60). In the last step when tried to separate glass screen from LCD, the LCD was ruined.
The glass and LCD were glued very tight. In my opinion, it is almost impossible to separate them safely. There are some differences in cables and connectors between the US version and the one showed in youtube (i assume it is the international version). There is one cable in the AT&T version that is very hard to disconnect.
Just to be clear, I consider myself very handy in electronics. I hope you can learn from my lesson. Tomorrow, I am going to send the phone to HTC repair center. Since I voided the warranty by disassembling it. I have no idea how much they will charge me.
Click to expand...
Click to collapse
Why don't you just order the whole LCD/digitizer/glass module? And of course the things gunna be hard to separate, you need to heat it up A LOT to loosen the glue
Sent from my Evo3d using Tapatalk 2
stumpyz9 said:
Why don't you just order the whole LCD/digitizer/glass module? And of course the things gunna be hard to separate, you need to heat it up A LOT to loosen the glue
Sent from my Evo3d using Tapatalk 2
Click to expand...
Click to collapse
Agreed
I learned my lesson with iphone/ipad digatizers. Of course its less than half the price for just the digi but the lcd/digi combo is definitely the way to go. If you do get it separated you have a lot of cleaning to do to get all the old glue/glass off and they are much harder to get back together than you would think. Also invest in a good set of tools. The tools are garbage that they send with the parts.
jjss4433 said:
I dropped my three-week old HTC one X on driveway by accident. The screen was shattered like a spiderweb. So I ordered a HTC One X screen/digitizer replacement from Amazon.
Today I tried to follow each step described in youtube ( http://www.youtube.com/watch?v=ceHw6mezG60). In the last step when tried to separate glass screen from LCD, the LCD was ruined.
The glass and LCD were glued very tight. In my opinion, it is almost impossible to separate them safely. There are some differences in cables and connectors between the US version and the one showed in youtube (i assume it is the international version). There is one cable in the AT&T version that is very hard to disconnect.
Just to be clear, I consider myself very handy in electronics. I hope you can learn from my lesson. Tomorrow, I am going to send the phone to HTC repair center. Since I voided the warranty by disassembling it. I have no idea how much they will charge me.
Click to expand...
Click to collapse
The price you pay for having those perfect 180 degree viewing angles and outdoor visibility...
stumpyz9 said:
Why don't you just order the whole LCD/digitizer/glass module? And of course the things gunna be hard to separate, you need to heat it up A LOT to loosen the glue
Sent from my Evo3d using Tapatalk 2
Click to expand...
Click to collapse
A screen is about $50, and a screen/LCD combo is at least $180. If I knew it was so hard to separate, I would probably order the combo. Another concern is, I am not really sure that the LCD/glass combo from ebay is as good as that from HTC.
Fyi I had HTC replace my cracked screen. They also replaced the housing (new case, yay) for some reason. They had it for two days plus 3 days shipping time to get it back. Total cost was $220. I'm handy in electronics but seems this is the way to go for now based on costs for the full assembly. They really had great service through the process and you can track the repair online.
Sent from my HTC One X using XDA
Oh how I wish I saw this thread before..
So I sure did break my digitizer.. and when I tried to replace it, it sure was glued to the LCD, and it did come apart lol. On the brighter side, I got a new digitizer and tools, I ordered an LCD but they shipped the wrong one.. but I will say this, I don't think it's that hard to take apart and reassemble.. aside from everything being glued together, and from what I gather the international version is not this way. Everything seems to make sense. I am starting to get lonely without her working. Sometimes I ADB into her just to say hi, mount my storage and make sure I got everything out just in case I butterfingers it and short something out. So aside from my agreement, here are the lessons I have learned.
1) Have a hair dryer handy, that glue is like concrete.
2) Don't just tug that battery cable out, the wires will come out of a socket (took 2 hours to get em back in)
3) For those of you whose digitizers and LCD's are broke.. "adb shell /system/bin/sdutil ums enable" will mount your storage so you can backup some stuff.
4) That torx screw driver you think you might need, haven't seen a torx screw yet, just loads of glue.
5) Take pictures of stuff before you disconnect it, and how you disconnected it for reference in reassembly.
6) This is the correct part # for the LCD 60H00664-01P, except no substitutes.
7) There are little crystal gluey things on the back of the digitizer that go through the case and transfer light. Don't expect them to fully light up ever again without remembering to move them (if you can)
8) It's worth fixing, sure I pre-ordered an HTC-One, but my One X will remain my phone because I love her, she's my first HTC and by far my best android ever. My HTC-One will be for Dev purposes >
9) Resist the urge to take the heat shield off to see if you can upgrade your storage by some kind of hidden micro sd, even if there is one, I'm sure it's got 5lbs of that crappy glue AT&T insisted upon.
10) If you think you want to change your digitizer just to rid your self of the AT&T logo, It's not worth it, I'm in it for 18$ for the digitizer and $43.99 for the LCD. Sure it's worth the money, but my sanity is long gone, I will name my next dog sanity.
You guys are the best ever! Good luck! God Speed!
Hunt3r.j2 said:
The price you pay for having those perfect 180 degree viewing angles and outdoor visibility...
Click to expand...
Click to collapse
I can't even see my screen outside.. what am I doing wrong
Sent from my HTC One X using xda app-developers app
ceo4eva said:
I can't even see my screen outside.. what am I doing wrong
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Are you running viper Rom by chance?
Sent from my HTC6435LVW using Tapatalk 2
beaups said:
Fyi I had HTC replace my cracked screen. They also replaced the housing (new case, yay) for some reason. They had it for two days plus 3 days shipping time to get it back. Total cost was $220. I'm handy in electronics but seems this is the way to go for now based on costs for the full assembly. They really had great service through the process and you can track the repair online.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
I think I might do this if AT&T doesn't let me take my upgrade early to the One. So you would recommend HTC to do this? Just out of curiosity, was your phone rooted/romed when you sent it in? How long ago was this done for you?
jjss4433 said:
The glass and LCD were glued very tight. In my opinion, it is almost impossible to separate them safely. There are some differences in cables and connectors between the US version and the one showed in youtube (i assume it is the international version). There is one cable in the AT&T version that is very hard to disconnect.
Just to be clear, I consider myself very handy in electronics. I hope you can learn from my lesson. Tomorrow, I am going to send the phone to HTC repair center. Since I voided the warranty by disassembling it. I have no idea how much they will charge me.
Click to expand...
Click to collapse
So if you can't do it, no one can?
ceo4eva said:
I can't even see my screen outside.. what am I doing wrong
Click to expand...
Click to collapse
Are you not enabling auto brightness?
Well..
Not that if he can't do it no one can, but the threshold of glue being heated to separation vs. the heat destroying the lcd is so close.. and the parts are so cheap to get independantly of one another. In the words of the hunger games.. may the odds be forever in your favor.
thebobmannh said:
So if you can't do it, no one can?
Are you not enabling auto brightness?
Click to expand...
Click to collapse
Hmm..
LOL figures I would run into a problem like this, new screen stops the phone from booting, old screen fires up the phone, if i plug in the new one while its running, the new one works fine, if i restart, back to death.. i could reassemble with it still running and pray i never need to restart my phone, but that would be messed up.. any ideas?
I've never had problems with it. Even while drinking. Just apply heat, then pull. If it doesn't come that easily, then it isn't hot enough or hasn't heated evenly.
Btw the combo fpr screens and digitizer rins $50-75 on eBay
Sent from my HTC One X using xda premium
Hello
Alright, so I had my lcd digitizer combo replaced, since the glass was broken. At first the lcd didnt work because it was AOM or something like that and wasnt Sharp's model like originally, but i syncded it as follows:
1.Took out the battery
2.Connected the old screen
3.Put back your battery
4.Start your phone
5.Wait about 2min to be sure
6.Take the old screen and replace it by the new
7.Press power button
8. Should be running and working.
But now.. after assembly it does detect the sim card, but gets no signal, so i cant make calls go to internet etc.. But wlan however does work ?
is there something I broke in the progress or ..
Hoping for some help, thanks
Delacty said:
Hello
Alright, so I had my lcd digitizer combo replaced, since the glass was broken. At first the lcd didnt work because it was AOM or something like that and wasnt Sharp's model like originally, but i syncded it as follows:
1.Took out the battery
2.Connected the old screen
3.Put back your battery
4.Start your phone
5.Wait about 2min to be sure
6.Take the old screen and replace it by the new
7.Press power button
8. Should be running and working.
But now.. after assembly it does detect the sim card, but gets no signal, so i cant make calls go to internet etc.. But wlan however does work ?
is there something I broke in the progress or ..
Hoping for some help, thanks
Click to expand...
Click to collapse
Sure sounds like you didn't re-connect the cell antenna correctly. Those ribbon cables are a *****. Could also be the little EMI tabs that come off of the blue antenna PCB and connect to the case, I would think (just guessing, as I'm staring at my disassembled phone right now).
thebobmannh said:
Sure sounds like you didn't re-connect the cell antenna correctly. Those ribbon cables are a *****. Could also be the little EMI tabs that come off of the blue antenna PCB and connect to the case, I would think (just guessing, as I'm staring at my disassembled phone right now).
Click to expand...
Click to collapse
Is the cell antenna the black wire ? if thats the case, im pretty sure its well connected.
Delacty said:
Is the cell antenna the black wire ? if thats the case, im pretty sure its well connected.
Click to expand...
Click to collapse
I'm not positive which is the cell and which is the WiFi, to be honest....
Hello everyone,
Unfortunately I broke the Gorilla glass screen digitizer on my One X. I had it my back pocket and I sat on chair and I heard a cracking noise. It is a thin hairline crack, but it goes from one side to the other; the LCD is fine though. I am fairly good with fixing things and with a good guide I'll attempt to fix it myself.
The question I have is: should I change just the glass digitizer or should I change the screen too? From what I've seen on Youtube the digitizer is glued pretty good to the LCD and it is difficult to remove. I would attempt to remove just the digitizer but I am afraid not to scratch or damage the LCD in the process. Some people were recommending changing the digitizer and display in one piece. Price wise I am looking at around $20 for the digitizer alone or $80 for digitizer + LCD so I could definitely save on changing just the digitizer.
Has anyone tried change to change any of them and could you please share any feedback I could use ?
Thanks.
WRONG SECTION
Sent from my HTC One XL using Tapatalk 2
There have been a few threads about this. The consensus has been that only HTC can ever get the phone back to a presentable condition after trying to reinstall the glass. And I believe their cost is in the $200-$300 range. I don't think I have seen a single report of a DIY replacement that worked out well. And several "professional" fixes that looked terrible. If you want the glass seated back flush with the phone and the capacitive buttons lined up right I think your only option is HTC, and its not cheap.
Sent from my HOCKS
---------- Post added at 09:24 AM ---------- Previous post was at 09:20 AM ----------
CheesyNutz said:
WRONG SECTION
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
And, <sigh> this does belong in the Q&A section, as so eloquently stated above. That's where you will probably find the other threads about screen replacements.
Sent from my HOCKS
CheesyNutz said:
WRONG SECTION
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Ops, you're right. Could a MOD please move it to the Questions and Answers section?
quarlow said:
There have been a few threads about this. The consensus has been that only HTC can ever get the phone back to a presentable condition after trying to reinstall the glass. And I believe their cost is in the $200-$300 range. I don't think I have seen a single report of a DIY replacement that worked out well. And several "professional" fixes that looked terrible. If you want the glass seated back flush with the phone and the capacitive buttons lined up right I think your only option is HTC, and its not cheap.
Click to expand...
Click to collapse
OK, so installing just the glass is difficult and might not look or work as good. But what if I change buy the glass and LCD in one piece and install it in one block (costs around $90 for the part)? Any bad reports for this one? Sending to HTC is out of the question, for $300 I might as well get another phone.
Also is there any difference between the international EndeavorU Tegra 3 and Evita S4 variants when it comes to LCD size compatibility? Most of the vendors on eBay don't specify if it is for the international version or Evita so I am assuming it should be the same thing. But, the Evita is 0.5 mm longer than the International version so there is a possibility the displays are different.
There is a difference in sizes among the various One X models. They are not interchangeable. The AT&T version costs the most, naturally (I want to say $150+). If you have an AT&T version, the international One XL (must be LTE version) screen will fit almost perfect, but the capacitive keys don't line up right. Plus with the exception of the AT&T logo its really hard to tell them all apart.
Basically, if the still screen works, keep using it as is. Otherwise getting a new phone is recommended.
Sent from my HOCKS
quarlow said:
There is a difference in sizes among the various One X models. They are not interchangeable. The AT&T version costs the most, naturally (I want to say $150+). If you have an AT&T version, the international One XL (must be LTE version) screen will fit almost perfect, but the capacitive keys don't line up right. Plus with the exception of the AT&T logo its really hard to tell them all apart.
Basically, if the still screen works, keep using it as is. Otherwise getting a new phone is recommended.
Sent from my HOCKS
Click to expand...
Click to collapse
I have the version sold in Canada by Telus and Rogers (LTE). Basically it is the AT&T version but with a HTC logo instead of AT&T (and with an unlockable bootloader). I would prefer to get a 100% working screen with a HTC logo, not AT&T. But from you mentioned, my only option would be the LTE International One XL.
What do you mean the capacitive keys don't line up right? Aren't they built inside the whole glass-LCD assembly? If I change the whole thing, do I still need to mess with the capacitive keys ?
Thank you.
I've only seen people replace the whole front glass assembly, which includes the buttons. The lights are in a different place, so the buttons work, but only halfway light up. I'm not sure on the Canadian version, I have the AT&T version, so that's the one I have watched for. Everything I read about this is on xda somewhere. I just don't know exactly where the threads were. Possibly in the accessories forum too.
Sent from my HOCKS
I think it is safer to avoid replacing just the glass, I want to go with glass and LCD one piece swap. If I replace it with this eBay item for example, I should have everything work back to original state including the capacitive buttons assuming that the display is compatible with my HTC ?
At this point you have nothing to lose except 90 bucks... Buy the glass, and replace it. Take your time, and you will also learn something. Whenever people say something is hard, I use it as my drive to prove them wrong. YOU CAN DO IT!!!
Tip: reassemble it, then if t dont look right, take it apart again, then reassemble it again, this kind of softens the plastic gasket that holds the screen in place, after a couple attempts it should sit in just like new.
Sent from my HTC One X using xda premium
That's what I meant: glass, digitizer, and LCD in one unit. Its hard to tell if that came out of a LTE version. There are no many One X variants that use the same name. You can try to ask the seller. The only guarantee to get the right part and get them installed correctly is to deal with HTC. Having a screen not seated right, or the buttons not lighting up right would drive me crazy.
Personally, I would just get a new phone, depending on the crack.
Sent from my HOCKS
quarlow said:
That's what I meant: glass, digitizer, and LCD in one unit. Its hard to tell if that came out of a LTE version. There are no many One X variants that use the same name. You can try to ask the seller. The only guarantee to get the right part and get them installed correctly is to deal with HTC. Having a screen not seated right, or the buttons not lighting up right would drive me crazy.
Personally, I would just get a new phone, depending on the crack.
Sent from my HOCKS
Click to expand...
Click to collapse
Oh I got it. So the capacitive buttons lights are NOT inside the digitizer-LCD unit, that's why the misalignment issues. So basically my best bet would be with an AT&T branded screen. I guess I'll take an AT&T logo instead of a bad capacitive buttons.
tylerdurdin said:
At this point you have nothing to lose except 90 bucks... Buy the glass, and replace it. Take your time, and you will also learn something. Whenever people say something is hard, I use it as my drive to prove them wrong. YOU CAN DO IT!!!
Tip: reassemble it, then if t dont look right, take it apart again, then reassemble it again, this kind of softens the plastic gasket that holds the screen in place, after a couple attempts it should sit in just like new.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I will try to do it, I fixed my galaxy S2 before with guides from the internet, I'll try with the One X. I am just waiting for the seller to confirm if his part is compatible with the HTC One X Evita.
But the bottom line is > phones have grown to big for their own good. The bigger the screen size, the higher the flex. The result is easy to see.
I didn't want a 4.7" but really wanted an HD screen. I guess from now on I'll stick with a 4.3 screen, it is easier to operate with one hand and probably more flex resistant.
Everyone wants thinner, bigger, lighter phones. At some point people need to stop and look at longevity of the device.
Sent from my HOCKS
Thread moved to Q&A. Please keep all question threads in that section only. Thank you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
I have emailed 4 eBay sellers and none of them know if their LCD-display assembly is 100% compatible with the North American HTC One X ( AT&T, Telus, Rogers ).
Has anyone bought a display lately and can recommend a seller ?
Corbu said:
I have emailed 4 eBay sellers and none of them know if their LCD-display assembly is 100% compatible with the North American HTC One X ( AT&T, Telus, Rogers ).
Has anyone bought a display lately and can recommend a seller ?
Click to expand...
Click to collapse
http://www.ebay.com/itm/180915293231
this is the one I used for my HTC ONE X att branded.
Sent from my HTC One X using xda premium
I broke my screen a couple months ago on my att HOX. I ordered a new screen to attempt a repair because the lcd was not damaged. I trolled the inet researching before and after I received my screen. short of the long is replacing the screen only? IMPOSSIBLE! way too much adhesive heating slightly only ended up damaging the lcd. I ended up ordering my screen/lcd from repair universe. Meanwhile phone was out of order Once the later than promised repair item arrived from them. It had the HTC logo instead of the ATT one at the top. (little scared at that point to continue, but what the hell) everything fit well. my only complaint is the captivate buttons on the bottom. I was able to transfer the plastic light things for the captivate buttons, just not as perfect as I would like. However works well.
(edit) I still have the screen digitizer. Free to anyone willing to pay for the shipping from Utah, or talented enough to get the screen away from the lcd. LOL
At&t one x and international one xl are identical except for software and the logo. You can get either of these screens with no misalignment.
Sent from my One XL
Intub8 said:
http://www.ebay.com/itm/180915293231
this is the one I used for my HTC ONE X att branded.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
subarudroid said:
I broke my screen a couple months ago on my att HOX. I ordered a new screen to attempt a repair because the lcd was not damaged. I trolled the inet researching before and after I received my screen. short of the long is replacing the screen only? IMPOSSIBLE! way too much adhesive heating slightly only ended up damaging the lcd. I ended up ordering my screen/lcd from repair universe. Meanwhile phone was out of order Once the later than promised repair item arrived from them. It had the HTC logo instead of the ATT one at the top. (little scared at that point to continue, but what the hell) everything fit well. my only complaint is the captivate buttons on the bottom. I was able to transfer the plastic light things for the captivate buttons, just not as perfect as I would like. However works well.
(edit) I still have the screen digitizer. Free to anyone willing to pay for the shipping from Utah, or talented enough to get the screen away from the lcd. LOL
Click to expand...
Click to collapse
Thanks. One question regarding these screens from eBay: Is the LCD the same quality as the original one (same colors, contrast, brightness) and is the glass Corning Gorilla Glass or ordinary non scratch resistant glass ?
PurpleFries said:
At&t one x and international one xl are identical except for software and the logo. You can get either of these screens with no misalignment.
Sent from my One XL
Click to expand...
Click to collapse
Do you have a link with a XL screen (HTC logo) that works just like the original one?
Some people are reporting that the capacitive buttons light are not properly aligned with the One XL, only half of the buttons light up. I would get a XL screen with an HTC logo, but I think I would tolerate an AT&T logo instead of half lit capacitive buttons.
No clue on the quality or type of glass. The day after my repair, I had invisasheild installed. I like The feel of glass vs plastic but I don't really want to go though that again. The display on 1080 looks great for my movies.
Sent from my One X using xda app-developers app
do we need to heat the screen and back to get the screen+digitizer of the housing, i got this thing all dis-assembled...
Guys i was reading ebook last night when suddenly my volume keys fell off, and there are no genuine Replacement back cover available in my country, please guide me can i stick it with super glue? and which part i should use to put glue in? felt better to ask in fear of messing it up, or if anyone knows any site which delivers without need of paypal or credit cards.
Alipk52 said:
Guys i was reading ebook last night when suddenly my volume keys fell off, and there are no genuine Replacement back cover available in my country, please guide me can i stick it with super glue? and which part i should use to put glue in? felt better to ask in fear of messing it up, or if anyone knows any site which delivers without need of paypal or credit cards.
Click to expand...
Click to collapse
Maybe trying to go and repair it on the phone store?
Sent From Viperized Beats Sensation XE
I wouldn't suggest you to stick it with a super glue. It can damage your phone and get worse than now. Try to find someone, who works with that things. good luck!
Alipk52 said:
Guys i was reading ebook last night when suddenly my volume keys fell off, and there are no genuine Replacement back cover available in my country, please guide me can i stick it with super glue? and which part i should use to put glue in? felt better to ask in fear of messing it up, or if anyone knows any site which delivers without need of paypal or credit cards.
Click to expand...
Click to collapse
Yes they are cheap plastic, I'm afraid the back cover should be changed. You can also use the phone withour volume buttons, they are rarely used anyway. Adda widget on homescreen for volume control and you should be ok
Sent from my HTC Sensation Z710e using Tapatalk 2
reddvilzz said:
Maybe trying to go and repair it on the phone store?
Sent From Viperized Beats Sensation XE
Click to expand...
Click to collapse
There are many, but problem is they're not reliable, instead of fixing they may make it even worse
karolisdirma said:
I wouldn't suggest you to stick it with a super glue. It can damage your phone and get worse than now. Try to find someone, who works with that things. good luck!
Click to expand...
Click to collapse
Same Answer as above, if you guys know reliable site other than amazon or ebay, who supports various payment methods, i searched alot but couldn't find any
elvisypi said:
Yes they are cheap plastic, I'm afraid the back cover should be changed. You can also use the phone withour volume buttons, they are rarely used anyway. Adda widget on homescreen for volume control and you should be ok
Sent from my HTC Sensation Z710e using Tapatalk 2
Click to expand...
Click to collapse
Yup that is a good solution, but it'll not help once i'll plan to sell the device, buyer'll complain/reject bcoz of missing/faulty hardware keys
P.S I guess i have to buy replacement back cover, but don't know online store which will support other options than credit card or paypal, i checked here at local stores, but it isn't available here.
karolisdirma said:
I wouldn't suggest you to stick it with a super glue. It can damage your phone and get worse than now. Try to find someone, who works with that things. good luck!
Click to expand...
Click to collapse
i used super glue to put my newly ordered volume button on, works great :]
Do you know anyone in another country that can buy a new case for you and then post it to you?
tapped out from my sexy sensation XE
Hey there, if anybody could point me in the direction of a replacement Power/ Volume flex cable it would be greatly appreciated. I had seen them being sold 2-3 weeks back, yet now no amount of searching is turning one up. I need to replace the flex cable on my Pixel Xl due to water damage. If anybody happens to know if the part is cross compatible between the Pixel and the XL varient I would really like to know also.
Thanks in advance,
Hugh
hughisdaft said:
Hey there, if anybody could point me in the direction of a replacement Power/ Volume flex cable it would be greatly appreciated. I had seen them being sold 2-3 weeks back, yet now no amount of searching is turning one up. I need to replace the flex cable on my Pixel Xl due to water damage. If anybody happens to know if the part is cross compatible between the Pixel and the XL varient I would really like to know also.
Thanks in advance,
Hugh
Click to expand...
Click to collapse
This is all I could find. Looks like you'd have to import it if you're in the states.
Power/Volume Flex Cable
Part # 51H20821-01M
troy` said:
This is all I could find. Looks like you'd have to import it if you're in the states.
Power/Volume Flex Cable
Part # 51H20821-01M
Click to expand...
Click to collapse
Thank you the world, I appreciate you going out of your way to lend a hand.
hughisdaft said:
Thank you the world, I appreciate you going out of your way to lend a hand.
Click to expand...
Click to collapse
No problem! I've been repairing phones for many years now and I know how annoying it is when you can't find the components you need.
Good luck!
I know that this is an old thread, but
does anyone know where I can purchase the "Google Pixel XL (G-2PW2200) Power flex + Volume flex" cable also?
there are the sites that I found that would sell it, IF it was in stock. I would be extremely grateful if I could find this part.