Am stuck at LG LOGO after ics update from GB to ICS using LGMOBILE SUPPORT TOOLS.....factory reset my phone still can't boot stuck at LG LOGO...i followed this thread (http://forum.xda-developers.com/showthread.php?t=2195753) but still cant boot stuck at LG LOGO......Any Help cause i really want ICS on my phone....
Only GB ROM BOOT(STOCK/CUSTOM)
Hard factory reset as described.
Did it several times....still stuck(Volume down + power) Only GB boot tried Wkpark bootloader still cant boot
wrong partion & don't inject cwm recovery in rom befor
Brisco59 said:
Did it several times....still stuck(Volume down + power) Only GB boot tried Wkpark bootloader still cant boot
Click to expand...
Click to collapse
wrong partition & don't inject cwm recovery in rom befor flash it .
try this http://forum.xda-developers.com/showthread.php?t=2337545
Thx GrMo
GrMo Hady said:
wrong partition & don't inject cwm recovery in rom befor flash it .
try this http://forum.xda-developers.com/showthread.php?t=2337545
Click to expand...
Click to collapse
Thanks i wil try that....feedback when it done.....
flash and stuck at upgrading system.....after upgrading system completed.....it cant get to the home screen.....so i rebooted i did hardreset now am stuck at lg logo again.....i have to flash back to gb to let my phone to work again......any help to pass through upgrading system .....
Related
hi guys
i installed wid Cm7 which was wrking fine on DEfy and i have backup for my froyo and CM7 aswell on my SD card. Now i was trying go in recovery mod then My screen is stuck on GOOGLE logo of CM , but still i can go on bootloader and recovery mod 3e. Not Clockwork Mod. whenever i start phone its come to the GOOGLE logo by CM n then stucks there. i tried to do wipe data n factory data, just took my chances if it could do miracle but didnt wrk either erroe comes.
I tried RSD Lite to flash back Stock Rom Froyo but seems like it cannot " show My device on it" b4 i try to flash. Even if i try to flash with RSD Lite its lands up to fail error. what shud i do any suggestion ? how can i make my device work again :| pls help or guide me out of this problem.
i tried to factory reset my data through cwm recovery and my mobile stuck there... i removed the battery and restarted my cell but it hanged on samsung logo.... i tried to flash firmware through KIES but now i get a screen saying """"" Flash firmware encountered an issue.. select recovery mode in kies and try again""...... what to do.....
samsung galaxy note GT-N7000, ICS 4.0.4..... plzzzz help.. i m stuck...... also found some error like "E:// cant load emmc" while wiping in cwm recovery.. plz helpppppp
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
naveed8695 said:
i tried to factory reset my data through cwm recovery and my mobile stuck there... i removed the battery and restarted my cell but it hanged on samsung logo.... i tried to flash firmware through KIES but now i get a screen saying """"" Flash firmware encountered an issue.. select recovery mode in kies and try again""...... what to do.....
samsung galaxy note GT-N7000, ICS 4.0.4..... plzzzz help.. i m stuck...... also found some error like "E:// cant load emmc" while wiping in cwm recovery.. plz helpppppp
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
you have to remember that after wiping the phone, you MUST flash a rom in your phone. The reason why your phone is stuck in the boot logo is because, there is NO software for it to run. Try flashing a rom
click thanks if helped
cs098 said:
you have to remember that after wiping the phone, you MUST flash a rom in your phone. The reason why your phone is stuck in the boot logo is because, there is NO software for it to run. Try flashing a rom
click thanks if helped
Click to expand...
Click to collapse
Wrong.
When you wipe user data/factory reset in the recovery it formats "/data/", the ROM itself is located in "/system/".
@naveed8695
You have to download a stock rom for your phone that you can flash using ODIN. You can follow this to flash your phone. At the bottom of the post you can find a small, simple tutorial on how to use ODIN. (1.b Final Installation)
REMEMBER TO KEEP "RE-PARTITION" UNTICKED
Can't figure it out? Visit the VillainRom IRC channel here.
cs098 said:
you have to remember that after wiping the phone, you MUST flash a rom in your phone. The reason why your phone is stuck in the boot logo is because, there is NO software for it to run. Try flashing a rom
click thanks if helped
Click to expand...
Click to collapse
it just stuck at factory reset.... nw i m stuck at flash firmware encountered and issue..... cant go to recovery mode .... and download mode always shows low battery cant download
TeeJay3800 said:
Just a reminder to everyone creating a new thread in the Q&A section. Please always include a relevant and descriptive title!
Click to expand...
Click to collapse
hi
Explain wat exactly happende so that i can help
i did full wipe to my p500 and now it's stuck on ROM logo (that one after lg). i'm waitin more than 10 minutes.. What should i do?
pls help guys, I have 4.0.4 with cwm recovery.
i could not open downlaod mode, i'll try again. but idk how to flash through this it's my brother's phone i have s4 at all
and i know nothing about lg.... :/
Superlolz said:
pls help guys, I have 4.0.4 with cwm recovery.
i could not open downlaod mode, i'll try again. but idk how to flash through this it's my brother's phone i have s4 at all
and i know nothing about lg.... :/
Click to expand...
Click to collapse
LG phones don't have download mode
Are you still able to reboot to recovery a.k.a CWM ?
Sent from my GT-I9082 using Tapatalk
if u wiped all, that means u using CWM. boot into recovery by pressing home+volumeUP+power , wipe data/cache/dalvik-cache/batterystats and flash any rom from LGP500 thread.
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom