Database Info

Micromax A60 CWM-Recovery v5 by ngage_me

Presenting CWM Recovery v5
Hi Friends, Here is the download link...
CLICK HERE (Eclair 2.1) with 2.6.29 Kernel
MD5 checksum 37d712d4b8fb3856cd68ffd7147ac9d7
Click to expand...
Click to collapse
Please test this recovery for new A60 devices purchased in 2012
Click here to downlaod New (25th April)
Follow the below procedure to install.
Click to expand...
Click to collapse
How to install... Better instructions here for novice..
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Purpose of this recovery...... I can see only few... To clarify others doubt...
1. We can utilize latest format of updater/update scripts... while flashing....
2. It does backup of sd-ext also.. not sure if u hv observed for v2.5 or not...
3. Better and faster....
4. Most important... A recovery have nothing to do with any ROM... so it's 2.1 or 2.2 or 2.3... Its sole purpose is to backup the partition
Click to expand...
Click to collapse
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..

CwM Recovery v5 for Froyo 2.2.1
Here is the link for A60 Froyo 2.2.1 users.....
CLICK HERE (Froyo 2.2.1) with 2.6.32 Kernel STILL WAITING FOR CLARO TESTERS... LINK IS FALSE NOW
Click to expand...
Click to collapse
Installation Procedure remains same as mentioned above.....
CLARO USERS RECOVERY IS UNDER TEST.. NEED MORE TESTER FOR CLARO
Click to expand...
Click to collapse
Cheers.... Njoy.... & Thank....

For those who are using the recovery for first time
1. Root ur phone. check here
2. install busybox from market.
3. Install "recovery manager".. check there is a "recoveryy" folder on ur sd card is created.
4. Download the latest recovery or the v2.5 recovery.. links on my signature..
5. place the downloaded recovery in "recoveryy" folder and flash it via recovery manager..
For those recovery 5 isn't work.. try v2.5 recovery first..
Follow the instruction carefully...
A better way of doing this on the way.. stay tuned...

ngage_me said:
Planned to post for eclair, froyo..
and also for claro users....
Click to expand...
Click to collapse
It was long time awaiting development from your side..Good work again, keep going.........

????
ngage_me, this recovery will enable us to run gingerbread on our fones or something else, thanks for the development, I have already clicked the thanks button.
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse

link ?
dude when are you going to post the link ? and i have clicked on thanks !

ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
bro where is the link bro i am the most happiest man if this recovery works perfect in our a60 really thanks a lot bro

Sorry for d delay friends......
I did tested things.. nd all work fine.. jst usb toggle isn't work this time again..
it's detecting my sd-ext partition too... since i don't hv anything on sd-ext not sure if it will take backup.. for first few test it hvn't created any backup...
so just wanted to double sure before i post here.. that you guys don't loose ur valuable data of sd-ext..
so please b patient...
I'll upload it tonight......

@ngage_me-yes you did that again by making a new recovery as u made earlier, just one bug as you said in the mount corner except everything is fine........

confirmed successful flashing with android download tool on micromax a60.

thanks,I successfully flashed cwm recovery v5.0.2.8 using recovery manager.apk
Sent from my HTC Explorer A310e

@ngage_me
Awesome work!!!
Built from source??
Btw can I get recovery.fstab of this??
Sent from my Micromax_A70 using Tapatalk 2 Beta-4

Stuck at Micromax Screen
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?

awesome
bro really awesome bro downloading will reply in a while i already cliked thanks yesterday itself anyway thanks a lot bro
---------- Post added at 04:49 PM ---------- Previous post was at 04:31 PM ----------
bro your recovery is great can u please post me the backup.img files of the 2.1 eclair rom bro please i need them to flash it from the android download tool please help me bro
@nagae_me--please help me bro

rohan.sankhe said:
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
Click to expand...
Click to collapse
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.

Congrtzzz.....
ngage_me said:
Presenting CWM Recovery v5
How to install...
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
hey ngage_me....its another grt work from u dude.....u rockzzzzz..........and tanx for upgrading us frm stone age.......
--------------------------------------------------------
Juz click thanx if u liked this post...!!!

small problem bro
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do

Suggestion....
sridz.y.j said:
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Click to expand...
Click to collapse
OK cool!!! seems u messed of few things...
Try factory reset from recovery....
else
follow this... (2.1 original rom)
1. download full dump, link available in signature..
2. In case Android tool is detecting ur phone gr888.. just flash all the image available in the zip... MAKE SURE U HIG ERASE CHECK BOX WHILE FLASHING..., else first install the usb driver available in zip...
3. then repeat the step 2.
i sure ur phone will be back on working.... u can directly flash this recovery instead of using stock recovery from zip...
later u hv all options to using ny other rom...
Cheers!!!...
And yeah sorry for d delay.. i ws out on a party yesterday...

ramyjec said:
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Click to expand...
Click to collapse
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...

ngage_me said:
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
Click to expand...
Click to collapse
@ngage_me I am using Jet 2.1 (froyo one) and yours froyo recovery is not working (not installing through ARM 11 and if installed using recovery manager it stucks in micromax logo when going into recovery), but eclair recovery is working I have taken backup from it and everything sceems fine even sd-ext was backedup.

iball andi 4.5h Clockworkmod ( CWM ) Recovery and Custom Rom Full Tutorial

Hi Guys,
Here is Good News for iball andi 4.5h owners
Go here and download recovery :
http://www.4shared.com/file/oL1GKmGv/iball_andi_45h_V10.html
Note : phone must be rooted
1. Run Downloaded file
2. Attach Device to PC with screen unlocked
3.press 1 in cmd
4. after that it will ask for SU permission on device Grant it
5. you have done
6. test it by using Vol + and pwr key
Note : i m not responsible for any damage to your device . My device working smooth with it
post result here

It doesnt cause any problems?? also, what about backup of stock recovery??
and whats the use of custom recovery when there are no custom ROMS available?
---------- Post added at 11:21 PM ---------- Previous post was at 11:17 PM ----------
also, can you tell me what is this??
http://search.4shared.com/postDownload/3vTp7WBB/i_ball_andi_45h_-oppo_v1.html

also how to get back to stock recovery if we need it??

you can backup whole system using mtk flasher .
its around 950mb
you need to press vol + and vol - together for connection at the time of backup .
mtk 6577 scatter file.
Using Lewa OS in it .
I ll upload it later .
there are exams these days. I cant give too much time for modifying rom and other things.

Ok.. When you get time, please tell me in detail..

hello iBall Andi 4.5h users, we have the same phone but different brands a.k.a rebranded phone. my phone is the kata i1 you can search it and you can see it is similar you can join our facebook group. we have many mods already and maybe you can also contribute. thanks here is the link.
https://www.facebook.com/groups/katai1/:good:

Thank you
Sent from my Andi4.5h

how to root and extract the full stock rom of MT6577 devices
http://www.mediafire.com/view/?1al12tbqci5jmd8

anyone tried this? does this work on 4.5h?

does this work?
supercfc said:
Thank you
Sent from my Andi4.5h
Click to expand...
Click to collapse
@supercfc - did this worked for you?

TWRP
http://www.mediafire.com/download.php?8fp1q2d7ma675wv
CWMR
http://www.mediafire.com/download.php?zwlqhxbg1o7640q
How to Install:
1) Download Mobileuncle APK to you phone
2) Download, unzip then place recovery.img in your SD Card
3) Start Mobileuncle
4) Select Recovery Update
5) Select the recocvery.img
6) Phone will automatically boot into custom recoery
Credits: Victor Laviste

custom roms
http://iballandi45h.blogspot.in/

(CWM)Clockwork mod Recovery For Karbonn A1+

HELLO Mates Here i Present u Clockworkmod recovery for a1+
Downloads :Recovery.img http://www.mediafire.com/download/kf88nz9k9adugqa/A1+_recovery.img
Mobileuncletool : http://www.mediafire.com/download/lmd4m939ymahddz/Mobile_uncle_tools(1).apk
How to install
1.Download Recovery.img and Mobileuncle tool from given links
2.Rename A1+ recovery.img to recovery.img
3.Copy recovery.img to root of ur sd card
4.Install mobileuncle tool
5.Open mobileuncle tool click flash recovery from sdcard allow root permission and click ok
6. Thats it:angel::fingers-crossed:
HIT THANKS IF I HELPED U

Will this work ON S/W 2.1.3 ??
ch3than said:
HELLO Mates Here i Present u Clockworkmod recovery for a1
Downloads :Recovery.img http://www.mediafire.com/download/kf88nz9k9adugqa/A1+_recovery.img
Mobileuncletool : http://www.mediafire.com/download/lmd4m939ymahddz/Mobile_uncle_tools(1).apk
How to install
1.Download Recovery.img and Mobileuncle tool from given links
2.Rename A1 recovery.img to recovery.img
3.Copy recovery.img to root of ur sd card
4.Install mobileuncle tool
5.Open mobileuncle tool click flash recovery from sdcard allow root permission and click ok
6. Thats it:angel::fingers-crossed:
HIT THANKS IF I HELPED U
Click to expand...
Click to collapse
Is this working fully. Also which software version did u test it on. Mine is 2.1.3 and H/W 3.0. Will it work for me??

ch3than said:
HELLO Mates Here i Present u Clockworkmod recovery for a1
Downloads :Recovery.img http://www.mediafire.com/download/kf88nz9k9adugqa/A1+_recovery.img
Mobileuncletool : http://www.mediafire.com/download/lmd4m939ymahddz/Mobile_uncle_tools(1).apk
How to install
1.Download Recovery.img and Mobileuncle tool from given links
2.Rename A1 recovery.img to recovery.img
3.Copy recovery.img to root of ur sd card
4.Install mobileuncle tool
5.Open mobileuncle tool click flash recovery from sdcard allow root permission and click ok
6. Thats it:angel::fingers-crossed:
HIT THANKS IF I HELPED U
Click to expand...
Click to collapse
There's a major bug with this cwm. I tried using it to flash ur xperia rom but both the times my phone got bricked (stuck on the karbonn logo) and a third time when I tried restoring a backup the same happened again and finally I had to take it to service center. I don't know if this happened only to me but still I think there's some problem with this version of cwm and then there's the display problem. I'm not being cynical but just wanna report what happened with me. . Please come up with a solution soon. Thanks.

Atishay Jain said:
There's a major bug with this cwm. I tried using it to flash ur xperia rom but both the times my phone got bricked (stuck on the karbonn logo) and a third time when I tried restoring a backup the same happened again and finally I had to take it to service center. I don't know if this happened only to me but still I think there's some problem with this version of cwm and then there's the display problem. I'm not being cynical but just wanna report what happened with me. . Please come up with a solution soon. Thanks.
Click to expand...
Click to collapse
Same thing happened with me. Did the service center managed to fixed it ?? Also failed to flash .PAC stock. :crying:

Ovi_India said:
Same thing happened with me. Did the service center managed to fixed it ?? Also failed to flash .PAC stock. :crying:
Click to expand...
Click to collapse
sir how to root karbonn a1+
---------- Post added at 08:38 AM ---------- Previous post was at 08:33 AM ----------
ch3than said:
HELLO Mates Here i Present u Clockworkmod recovery for a1+
Downloads :Recovery.img http://www.mediafire.com/download/kf88nz9k9adugqa/A1+_recovery.img
Mobileuncletool : http://www.mediafire.com/download/lmd4m939ymahddz/Mobile_uncle_tools(1).apk
How to install
1.Download Recovery.img and Mobileuncle tool from given links
2.Rename A1+ recovery.img to recovery.img
3.Copy recovery.img to root of ur sd card
4.Install mobileuncle tool
5.Open mobileuncle tool click flash recovery from sdcard allow root permission and click ok
6. Thats it:angel::fingers-crossed:
HIT THANKS IF I HELPED U
Click to expand...
Click to collapse
sir how to root karbonn a1+??
plz help me

Root karbon a1+
djniksthehearteditor said:
sir how to root karbonn a1+
---------- Post added at 08:38 AM ---------- Previous post was at 08:33 AM ----------
sir how to root karbonn a1+??
plz help me
Click to expand...
Click to collapse
How to root Karbonn A1+ (Plus)
DOWNLOAD THE APP
Go to settings>Security & enable the install from Unknown Source. (Skip if already enabled)
Open Settings>Application>Development>USB debugging>Enable USB Debugging.(Skip if already enabled)
Download the Z4root app from above link.
Copy it to your phone sdcard.
Install the app.
Open the app&you will be seeing a button "Permanent Root".Press that.
Your phone will autoboot once, & you are done with rooting your karbonn a1 plus.

Ovi_India said:
How to root Karbonn A1+ (Plus)
DOWNLOAD THE APP
Go to settings>Security & enable the install from Unknown Source. (Skip if already enabled)
Open Settings>Application>Development>USB debugging>Enable USB Debugging.(Skip if already enabled)
Download the Z4root app from above link.
Copy it to your phone sdcard.
Install the app.
Open the app&you will be seeing a button "Permanent Root".Press that.
Your phone will autoboot once, & you are done with rooting your karbonn a1 plus.
Click to expand...
Click to collapse
tried bt failed with z4root

Ovi_India said:
Same thing happened with me. Did the service center managed to fixed it ?? Also failed to flash .PAC stock. :crying:
Click to expand...
Click to collapse
Yes the service center people did manage to fix it. My device was in warranty and they couldn't detect that the problem was due to my fault so they did that for free.

!!!!
Atishay Jain said:
Yes the service center people did manage to fix it. My device was in warranty and they couldn't detect that the problem was due to my fault so they did that for free.
Click to expand...
Click to collapse
hMMM !!! i will be there soon !!!
---------- Post added at 09:53 AM ---------- Previous post was at 09:44 AM ----------
djniksthehearteditor said:
tried bt failed with z4root
Click to expand...
Click to collapse
If z4 root failed for u then try Unlock root...
DOWNLOAD UNLOCK ROOT
PLEASE GIVE ME A FEED BACK IF U SUCCEED IN ROOTING BY THE HELP OF THESE SOFTWARE.

djniksthehearteditor said:
tried bt failed with z4root
Click to expand...
Click to collapse
Use vroot. It did the job for me. z4root worked only till s/w 2.0.3 but for later version (2.1.3 which is mine) you need to use vroot. It was the case with me at least.

quattro l50 hd
i wants cwm recovery for karbonn quattro l50 Hd anyone can provide me pls

Finally Lava Iris X1 CWM ready!!(PORTED)

Lots of people were asking to build a cwm for iris x1...well now guys ur cwm is ready...
Thanks to patenpisan,ajaz35,n but obviously me ...
Procedure to flash recovery:-
1)root your mobile.. (If you don't know what is rooting then u should google it first)
2)download flashify app from play store.
3)give the app root permission.
4)backup your current recovery & boot.img through it.(*important)
5)now go to flash option & select recovery there...the window will pop-up asking to choose a file or dwnld custom recoveries...
6)select choose a file...browse n select your downloaded img....
7)then select file way...
8)nw app will ask you whether to flash file or not....click yup! There..
9)Taaaadaaa....reboot your phone to recovery by pressing power button+volume down (power button first when mobile will vibrate immediately press volume down)
10)nw u successfully flashed cwm on iris x1
What's working:-
*All
If anyone finds a bug rather Dan screen blinking(*I mean when we reboot our phn to cwm n scroll down the menu will divided n wen backing up ROM or flashing or anything the screen blinks n not so stable) den post it..we will clear DAT bug...
#DOWNLOADS:-
Attached file is there!!
#THANKS TO:-:angel:
Me
Ajaz35
patenpisan

Thanks vedang for updating on XDA
Don't fix root permission with this cwm otherwise u will lose root

Thanks a lot team dev xda... It's working properly for me... Thanks :thumbup:

ajaz35 said:
Thanks vedang for updating on XDA
Don't fix root permission with this cwm otherwise u will lose root
Click to expand...
Click to collapse
Nthng like dis...DAT option only come wen u flash any file..i.e ROM if u want prerooted ROM den fix root permission..[emoji6]

tanmoy
ULTRAvEdAnG... said:
Lots of people were asking to build a cwm for iris x1...well now guys ur cwm is ready...
Thanks to patenpisan,ajaz35,n but obviously me ...
Procedure to flash recovery:-
1)root your mobile.. (If you don't know what is rooting then u should google it first)
2)download flashify app from play store.
3)give the app root permission.
4)backup your current recovery & boot.img through it.(*important)
5)now go to flash option & select recovery there...the window will pop-up asking to choose a file or dwnld custom recoveries...
6)select choose a file...browse n select your downloaded img....
7)then select file way...
8)nw app will ask you whether to flash file or not....click yup! There..
9)Taaaadaaa....reboot your phone to recovery by pressing power button+volume down (power button first when mobile will vibrate immediately press volume down)
10)nw u successfully flashed cwm on iris x1
What's working:-
*All
If anyone finds a bug rather Dan screen blinking(*I mean when we reboot our phn to cwm n scroll down the menu will divided n wen backing up ROM or flashing or anything the screen blinks n not so stable) den post it..we will clear DAT bug...
#DOWNLOADS:-
Attached file is there!!
#THANKS TO:-:angel:
Me
Ajaz35
patenpisan
Click to expand...
Click to collapse
Not working black screen problem

santunu said:
Not working black screen problem
Click to expand...
Click to collapse
Can u explain how u flashed
Your build no.
I
---------- Post added at 01:00 AM ---------- Previous post was at 12:55 AM ----------
ULTRAvEdAnG... said:
Nthng like dis...DAT option only come wen u flash any file..i.e ROM if u want prerooted ROM den fix root permission..[emoji6]
Click to expand...
Click to collapse
But we are already rooted and these binaries mess up with already existing binaries
So don't fix root permissions.
---------- Post added at 01:07 AM ---------- Previous post was at 01:00 AM ----------
santunu said:
Not working black screen problem
Click to expand...
Click to collapse
Give your cwm flashing procedure n Also give build no.

santunu said:
Not working black screen problem
Click to expand...
Click to collapse
How u flashed it?
Don't use fastboot method...I mentioned procedure...go with that procedure....!!

custom recovery
Dude I liked your recovery .
bole to ekdam mast.
5 stars to recovery.

Now please build up custom ROM for Iris X1, like any..... Please

Thanx for cmw recovery for lava iris x1...Can u Do custom rom for lava iris x1...I love MIUI v5 Rom..Can u do custom MIUI v5 rom for lava iris x1
Cool update..thanx again

tanmoy
ULTRAvEdAnG... said:
How u flashed it?
Don't use fastboot method...I mentioned procedure...go with that procedure....!!
Click to expand...
Click to collapse
Still same problem WhatsApp me 9612324233 plz

tanmoy
I am successfully flash the cwm and go the recovery mod
but there is a problem when I try to backup or anything else on cwm mod the screen is divided (what should I do sorry I don't know English properly). every time on cwm mod screen is divided two part

santunu said:
I am successfully flash the cwm and go the recovery mod
but there is a problem when I try to backup or anything else on cwm mod the screen is divided (what should I do sorry I don't know English properly). every time on cwm mod screen is divided two part
Click to expand...
Click to collapse
that is the only graphical glitch in the cwm
But it is working fully.
U an use it until the issue is fixed.

tanmoy
OK bro but how many days to fix it

santunu said:
I am successfully flash the cwm and go the recovery mod
but there is a problem when I try to backup or anything else on cwm mod the screen is divided (what should I do sorry I don't know English properly). every time on cwm mod screen is divided two part
Click to expand...
Click to collapse
same happend in my case!!

EonJone said:
Thanx for cmw recovery for lava iris x1...Can u Do custom rom for lava iris x1...I love MIUI v5 Rom..Can u do custom MIUI v5 rom for lava iris x1
Cool update..thanx again
Click to expand...
Click to collapse
If u r bored of ur normal ui...den u can try our first custom ROM....

ULTRAvEdAnG... said:
If u r bored of ur normal ui...den u can try our first custom ROM....
Click to expand...
Click to collapse
Thanx for info ..When u guys releasing it? ??
Sent from my iris X1 using XDA Free mobile app

tanmoy
Hi bro graphics problem are solved or not

Can u guide how to solve graphic problem ????

can anyone help me. phone not booting after installing stock ROM using multibootloader.
Can I flash this CWM using multibootloader?

[Q&A] PHILZ RECOVERY for SPICE MI509

Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.

epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???

saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)

now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me

epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean

Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.

epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...

saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).

epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...

saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:

epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...

Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.

subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...

saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.

subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920

Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0