hi,
i have a problem with my umi x2. i flashed new rom from cwm. did all clear /cache/dalvik...before install. instalaltion went fine. but when restarted phone stucked at umi logo. would reflaash the phone but vol+power combination dont work and there is no way i can acces cwm. tried with flash tools to flash some new rom but in flash tools progres bar stoped at red bar. doesent go to purple and yellow....is there any other way to acces cwm or something.
---
ok i manage to reflash with flash tool with another rom.
Related
hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks
amitsaini said:
hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks
Click to expand...
Click to collapse
bro flash stock rom via SP flash tools it will work'
i got this already twice and solved via SP flash tool
amitsaini said:
hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks
Click to expand...
Click to collapse
bro. no need to flash full Rom.. ..rename clockworkmod recovery.. file to recovery.img and flash it through sp tools ...problem will solve
If nothing seems to work then try twrp recovery..flash it through sp flash tools or mobile uncle tools as per ur wish..
Hey techs,
Thanks, actully problem was solved after 5 mins when i posted this thread,, but i was not able to find this thread to post the answer.
solution was right there when i reinstalled the stock recovery and again installed the cwm hehehehe,, it worked,, thank you all have a nice day
Ntg happen. Open ur flas tools and load the scatter load file 4.1.1 and then click start after the green ring appers. Its ok. Now the process of rooting. Now u can easily root ur mobile.
Sent from my Micromax A110 using xda app-developers app
I'm using a lenovo s820, rooted, running stock rom and jb 4.2.1
I couldn't find any recovery like cwm or twrp for my phone and I ended up downloading a recovery that said it was a version of cwm for my phone from this app called mobileuncle mtk tools
The app flashed the recovery onto my phone and rebooted into recovery except that it didn't boot into recovery
Now it is stuck in a boot loop where it only shows the lenovo logo but does not boot
I've tried booting into recovery by holding "vol up+vol down+power" but it does the same thing
I tried booting into factory mode but it is in chinese and I cannot understand anything in it
I have a backup of my rom before flashing the recovery but it is stuck in the boot loop even after restoring the backup
I've also searched a lot and can't find a solution to my problem!
I've seen some solutions saying I should flash stock rom using flash tools but there's a big problem here. Flash Tools refuses to flash the stock rom onto my phone. I tried to do it while keeping the phone in meta mode but it wasn't happening.
I've attached the image of the factory mode menu
Please help asap! I can't use my phone at all and I'm panicking and I don't know what to do!!! :crying: :crying: :crying:
Update: I managed to restore clockworkmod recovery on my phone and I tried to restore the stock os from it but it says installation aborted and refuses to install the os :/
Look here:
http://forum.xda-developers.com/showthread.php?t=2576898
hi,
I was trying to flash STOCK ROM.
After flashing the stock rom, I found that I lost IMEI numbers and bluetooth address.
So, I went back to recovery to flash the rom again, Android Bot with red alert was coming.
So, I used SP tools to flash the ROM again but now with "Format option" including boot loader also.
After that, phone is stuck in Micromax logo and am not able to access anything including recovery.
Pls help.
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.
I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.
i tried to install custom recovery on my device
segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS
i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz
NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery