so it's stuck in this screen: www . youtube . com/watch?v=paihg2b4F5U
video is not mine, but it's doing exactly the same, just stays like that
i just want the phone fixed i don't really care about the files they can get lost. i tried connecting it to my pc but no hope it just stays connected for like 20 secs and disconnects. same with the phone: stays on for 20-40 secs and turns off
progress
so i connected it to my computer somehow by turning it off while it was looping and now it's connected to computer and does not get off
it's not in loop it's turned off but connected to the pc. now that i have established a connection any way to force it to factory reset or something FAST PLEASE ANSWER IT TOOK ME 20MIN TO FIND HOW TO MAKE IT NOT GO OFF AHHHH.
anyone here?
yooooooooooooooooooooooooooooooooooooooooo. anyone hereeeeeeeee?
Related
Hey guys
I couldn't get an answer to my question in any topic, so I decided to post here and ask for help.
I bought a Galaxy 5 from my neighbor and I didn't test it 'cause it was with the battery discharged.
I charged the battery to 100% I tried to turn on my galaxy.
But every time I try to turn on the smartphone, It get stuck on a screen with samsung logo and with the text: "Ramdump mode (arm9 mode)".
I just tested it in 4 computers but everytime I connect the phone to usb it just starts to charge the battery.
I can enter in download mode to put a stock rom on it, but it doesn't help me so much 'cause if my phone isn't recognized in the PC and in Odin, I can't do nothing.
So that's the situation: My smartphone isn't recognized by the computer (windows don't at least show any message about usb device connected). When I plug it in usb it just starts to charge.
So I'm asking for help.
Is there any way to put a bootable android in my microSD that starts automaticlly the installation when I turn on the phone ?
Thanks
Anyone haver a solution for this problem?
Hi, recently bought ThL 5000 and was ok. Yesterday started to heat and showed writing:CPU is overheating. Do you want to cool down!... I pressed Yes and for 5 minutes nothing could not do like freeze screen. Then phone restarted and started on where network could not be used and after sim out and in, switch off phone and could not power on!
Now, only when connect on USB computer there is sound like you connect usb stick and sound after 30sec like you take out stick. This should mean that "inside" phone thl5000 is mess and needs to flash if possible.
How to flash, does someone has scatter file that needed, which programs to use it for Thl5000?
Thanks in advance
My phone only shows the the elephone 2 e sign when I turn it on. I have tried pressing the on and volume key when I turn it on but nothing happened. I have followed some instructions on the elephone manufacturer site about installing drivers to my computer and then trying to reinstall the firmware. Unfortunately my computers (I have tried on three different ones) does not identify that a device is connected to the computer. Therefore I can't proceed to install the driver as according to my computer it is not installed. I have tried 2 different leads as well. I would be grateful for some help as I have no idea where to go from here.
Facing a similar issue, and since there's still no reply to this thread, I would like to add up a few findings I have on this matter to maybe help others and get helped.
My P3000S is also reaching the Elephone logo and displays it for a minute and then restarts, repeating the process (aka boot-loop).
The same happens whether it is connected or not connected to the charger/computer through a USB cable. (I've tried new cables but that's not the case).
When disconnected I can stop the boot-loop only by holding down the on/off button for a few seconds (or removing the battery of course).
When connected to the the charger or computer through the USB cable I have no way to stop the boot-loop (holding down on/off just restarts it).
Now with the battery removed..:
If I connect it to the charger/computer, though the charging red light turns on normally, I can't turn on the phone using the on/off button.
However, when connected through USB to a windows computer, I can see in the device manager that, right when I connect the phone it shows up as "Mediatek Preloader USB VCOM Port" under COM ports group, for 1 second and then disappears as if it was disconnected. There's no repetition here I have to manually hold down the on/off button or disconnect and reconnect the phone from the cable to cause this to happen again.
So, I am unable to flash anything nor turn the phone on because I practically only have 1 second of its presence in my devices list.
Also, I have tried all possible combinations with the volume up/down keys and the on/off button in order to enter recovery mode, with no success..
In case anyone has faced something similar or has any ideas on a possible fix on this phone please feel free to reply.
At last a reply to my initial message. Unfortunately it was someone with the same problem as me. I took out a paypal case against the person I bought the phone from and eventually they repaired it. Unfortunately they never told me how. To make matters worse it broke again within 2 months. The phone is now sat in a draw doing nothing. I have given up on it and will never buy another Elephone phone again.
So this scenerio happened when i tried to power up my lumia 540 after 2-3 months of inactivity ... the device gives 0 response to buttons and when i put it to charge after some minutes when i press the power button for severl seconds the device gives some vibrational feedback nothing else.. so i decided to connect it to the pc .. then at first it installed some sort of drivers and showed as usb input device .. then i disconnected and connected ones again then the device was listed as something named qualcommxxxxx driver and it downloaded some driver from internet (25mbapprox.). after it started connectimg and disconnecting automatically ... so the device connects and disconnects continously ..coz of this disconnevtion **** i cant even use the recovery software of lumia .. it shows the connected device but as it disconnects i cant flash the rom .... can someone give a solution for this issue plzzzzzz
As the title states, I used USB tether to connect my laptop to my phone's internet. Worked well. I then turned on wifi tether and connected my space phone to the wifi tether network. Worked for 5 minutes, then my oneplus 7 pro restarted itself and now is stuck in bootloop. I can't even get into fastboot.
It is stuck on the loading screen. It wont even turn off if I hold the power button. Just keeps loading until battery is drained.
How can I fix this? Is there a way I can keep all my data?
All suggestions welcome.
P.s. This is video of loading screen for reference
https://imgur.com/a/BxKB6kY
champstar said:
As the title states, I used USB tether to connect my laptop to my phone's internet. Worked well. I then turned on wifi tether and connected my space phone to the wifi tether network. Worked for 5 minutes, then my oneplus 7 pro restarted itself and now is stuck in bootloop. I can't even get into fastboot.
It is stuck on the loading screen. It wont even turn off if I hold the power button. Just keeps loading until battery is drained.
How can I fix this? Is there a way I can keep all my data?
All suggestions welcome.
P.s. This is video of loading screen for reference
https://imgur.com/a/BxKB6kY
Click to expand...
Click to collapse
When it's on the loading screen was those white dots moving slow if so might loose data if they was moving fast,then you can prob get it to boot into safe mode and delete whatever you got going on. But you could prob just download the ota package an slideload thru adb and not loose data