So this scenerio happened when i tried to power up my lumia 540 after 2-3 months of inactivity ... the device gives 0 response to buttons and when i put it to charge after some minutes when i press the power button for severl seconds the device gives some vibrational feedback nothing else.. so i decided to connect it to the pc .. then at first it installed some sort of drivers and showed as usb input device .. then i disconnected and connected ones again then the device was listed as something named qualcommxxxxx driver and it downloaded some driver from internet (25mbapprox.). after it started connectimg and disconnecting automatically ... so the device connects and disconnects continously ..coz of this disconnevtion **** i cant even use the recovery software of lumia .. it shows the connected device but as it disconnects i cant flash the rom .... can someone give a solution for this issue plzzzzzz
Related
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
cscheng:
I losted a lot of times comm upgrading Roms and NOTHING HAPPENS! (sorry for screaming...) Try to search some info at forums but....
-Try to close your upgrading soft (PC)
-Switch off-on your phone
-Connect usb cable again and try to upgrade now.
(maybe it refuses 2 or 3 times the upgrading, but I was trying and after 4 times it was like ever!)
Please, make it as your own risk.
Good luck friend!!
I have same Problem PLease Help
Have S200 G3 in Tri Color screen that gets to 50% on ROM load before it starts shutting off n on. It does the same thing if it is plugged into a pc via usb cable w/ battery installed after a short period of time.
It does not turn off n on it it is simply sitting there w/ the battery installed. Only when it is plugged in w/ a USB.
Does some 1 have access to info on phone recovery via flash card and Rom that I can use.
If not steps on resolving the problem long enough to load a basic Rom on the unit.
cscheng said:
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
Click to expand...
Click to collapse
Provide better break down, if possible w pics of actual steps. Ex. I don'd understand what you mean about the white wire and middle conectors in battery section. Only allow the other 2 to connect or ???
Dr.Thrax said:
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
Click to expand...
Click to collapse
Hi, i have a motorola XT720 which after a short drop it never power on again...there is no cracks nothing at the lcd...so i decide to plug to computer to see whats wrong...no response from the phone..after removing the battery for some hours after put back the battery and connect again to pc nothing except when i pushed the power button, the pc start recognize and start searching for drivers and after a while suddenly it shows device unplugged...also my phone it recognize it as an OMAP3430 device(and searching drivers for that) i have download the drivers from official page of motorola...what to do??please help!!!
Thanks anyway!!
turokomos said:
Hi, i have a motorola XT720 which after a short drop it never power on again...there is no cracks nothing at the lcd...so i decide to plug to computer to see whats wrong...no response from the phone..after removing the battery for some hours after put back the battery and connect again to pc nothing except when i pushed the power button, the pc start recognize and start searching for drivers and after a while suddenly it shows device unplugged...also my phone it recognize it as an OMAP3430 device(and searching drivers for that) i have download the drivers from official page of motorola...what to do??please help!!!
Thanks anyway!!
Click to expand...
Click to collapse
Are you sure that the battery is charged? The PC will not recognize your phone if it is not powered on
Hi, sorry for my late reply have internet problem...thanks for your reply!!! i can't even charg it as i can charge it via phone only..is there a way to charge it other that??
Thanks again!!!
so it's stuck in this screen: www . youtube . com/watch?v=paihg2b4F5U
video is not mine, but it's doing exactly the same, just stays like that
i just want the phone fixed i don't really care about the files they can get lost. i tried connecting it to my pc but no hope it just stays connected for like 20 secs and disconnects. same with the phone: stays on for 20-40 secs and turns off
progress
so i connected it to my computer somehow by turning it off while it was looping and now it's connected to computer and does not get off
it's not in loop it's turned off but connected to the pc. now that i have established a connection any way to force it to factory reset or something FAST PLEASE ANSWER IT TOOK ME 20MIN TO FIND HOW TO MAKE IT NOT GO OFF AHHHH.
anyone here?
yooooooooooooooooooooooooooooooooooooooooo. anyone hereeeeeeeee?
My phone only shows the the elephone 2 e sign when I turn it on. I have tried pressing the on and volume key when I turn it on but nothing happened. I have followed some instructions on the elephone manufacturer site about installing drivers to my computer and then trying to reinstall the firmware. Unfortunately my computers (I have tried on three different ones) does not identify that a device is connected to the computer. Therefore I can't proceed to install the driver as according to my computer it is not installed. I have tried 2 different leads as well. I would be grateful for some help as I have no idea where to go from here.
Facing a similar issue, and since there's still no reply to this thread, I would like to add up a few findings I have on this matter to maybe help others and get helped.
My P3000S is also reaching the Elephone logo and displays it for a minute and then restarts, repeating the process (aka boot-loop).
The same happens whether it is connected or not connected to the charger/computer through a USB cable. (I've tried new cables but that's not the case).
When disconnected I can stop the boot-loop only by holding down the on/off button for a few seconds (or removing the battery of course).
When connected to the the charger or computer through the USB cable I have no way to stop the boot-loop (holding down on/off just restarts it).
Now with the battery removed..:
If I connect it to the charger/computer, though the charging red light turns on normally, I can't turn on the phone using the on/off button.
However, when connected through USB to a windows computer, I can see in the device manager that, right when I connect the phone it shows up as "Mediatek Preloader USB VCOM Port" under COM ports group, for 1 second and then disappears as if it was disconnected. There's no repetition here I have to manually hold down the on/off button or disconnect and reconnect the phone from the cable to cause this to happen again.
So, I am unable to flash anything nor turn the phone on because I practically only have 1 second of its presence in my devices list.
Also, I have tried all possible combinations with the volume up/down keys and the on/off button in order to enter recovery mode, with no success..
In case anyone has faced something similar or has any ideas on a possible fix on this phone please feel free to reply.
At last a reply to my initial message. Unfortunately it was someone with the same problem as me. I took out a paypal case against the person I bought the phone from and eventually they repaired it. Unfortunately they never told me how. To make matters worse it broke again within 2 months. The phone is now sat in a draw doing nothing. I have given up on it and will never buy another Elephone phone again.
I have One plus three(android 9.0) . My phone once got dead due to low battery. I plugged the phone and restarted the device but on restarting at 0% itself the screen got line lines(black and purple) and the suddenly my phone shut down again.Afterward, its not responding, no response nothing not able to get to even one plus logo, led in not working, My PC(windows 10) is also not detecting the phone.
I tried to unbrick it using https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700.
But the phone is not detected not of these and obviously not as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)] in device manager.
But the deviceOne Plus 3 hands free HF keeps getting installed in device manager.
It also installs the bluetooth drivers and SMS/MMS under other devices when connecting the device with PC, once uninstalled and connected again.
Thanks.