Hi, recently bought ThL 5000 and was ok. Yesterday started to heat and showed writing:CPU is overheating. Do you want to cool down!... I pressed Yes and for 5 minutes nothing could not do like freeze screen. Then phone restarted and started on where network could not be used and after sim out and in, switch off phone and could not power on!
Now, only when connect on USB computer there is sound like you connect usb stick and sound after 30sec like you take out stick. This should mean that "inside" phone thl5000 is mess and needs to flash if possible.
How to flash, does someone has scatter file that needed, which programs to use it for Thl5000?
Thanks in advance
Related
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
cscheng:
I losted a lot of times comm upgrading Roms and NOTHING HAPPENS! (sorry for screaming...) Try to search some info at forums but....
-Try to close your upgrading soft (PC)
-Switch off-on your phone
-Connect usb cable again and try to upgrade now.
(maybe it refuses 2 or 3 times the upgrading, but I was trying and after 4 times it was like ever!)
Please, make it as your own risk.
Good luck friend!!
I have same Problem PLease Help
Have S200 G3 in Tri Color screen that gets to 50% on ROM load before it starts shutting off n on. It does the same thing if it is plugged into a pc via usb cable w/ battery installed after a short period of time.
It does not turn off n on it it is simply sitting there w/ the battery installed. Only when it is plugged in w/ a USB.
Does some 1 have access to info on phone recovery via flash card and Rom that I can use.
If not steps on resolving the problem long enough to load a basic Rom on the unit.
cscheng said:
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
Click to expand...
Click to collapse
Provide better break down, if possible w pics of actual steps. Ex. I don'd understand what you mean about the white wire and middle conectors in battery section. Only allow the other 2 to connect or ???
Dr.Thrax said:
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
Click to expand...
Click to collapse
I have i9023 runinng stock 2.3.6.
I want to back up some things from the storage but when I plug it ito my PC I don't get the notification thing to click to connect the storage anymore. Just the USB debugging icon pops up.
Any ideas why this is? Don't think I changed anything
Plug the phone into your computer, turn the phone off. While still plugged in boot into fastboot and you should hear your computer make the sound it makes when you normally plug your phone in. Unplug the phone and it should make another sound. Finally plug the phone back in and it should make said noise, click reboot and it should be able to connect. I don't know what causes this but it's happened to me about 3 times and everytime iv done these steps to fix it.
Sent from my Nexus S using XDA App
The only thing worked for me was to remove the battery.
If you done that before, just restart your pc and your phone, and connect them again.
I think you maybe disable some usb service. after restarted it will be fine.
thanks after messing around rebooting the phone etc I think the problem was the computer, doh. rebooted THAT and now all working fine
thanks for the replies =)
I have a galaxy s2 skyrocket, yes it is rooted.
My phone ran out of juice last night and I started to charge it.
I had class at 12, woke up at 11 so I turned off my phone to make it charge quicker. a few minutes later it was on. I tired turning it off to no avail. It turns off and comes right back on. I then tried to put it into usb mode so I could copy a few songs onto it....It wouldnt go into usb mode (it recognized the charge, but not the fact it was plugged into a pc) Kies wouldnt recognize it.
Did 3 factory resets, didnt work still same issues.
Also, it wont go into download mode, just vibrates every few seconds until i let go.
any help is appreciated.
ch4dwick92 said:
I have a galaxy s2 skyrocket, yes it is rooted.
My phone ran out of juice last night and I started to charge it.
I had class at 12, woke up at 11 so I turned off my phone to make it charge quicker. a few minutes later it was on. I tired turning it off to no avail. It turns off and comes right back on. I then tried to put it into usb mode so I could copy a few songs onto it....It wouldnt go into usb mode (it recognized the charge, but not the fact it was plugged into a pc) Kies wouldnt recognize it.
Did 3 factory resets, didnt work still same issues.
Also, it wont go into download mode, just vibrates every few seconds until i let go.
any help is appreciated.
Click to expand...
Click to collapse
Are you running an ICS rom or on GB rom or stock with root?
Stock GB with a root.
What do you mean ran out of juice? It went completely dead and shut off?
ch4dwick92 said:
I have a galaxy s2 skyrocket, yes it is rooted.
My phone ran out of juice last night and I started to charge it.
I had class at 12, woke up at 11 so I turned off my phone to make it charge quicker. a few minutes later it was on. I tired turning it off to no avail. It turns off and comes right back on. I then tried to put it into usb mode so I could copy a few songs onto it....It wouldnt go into usb mode (it recognized the charge, but not the fact it was plugged into a pc) Kies wouldnt recognize it.
Did 3 factory resets, didnt work still same issues.
Also, it wont go into download mode, just vibrates every few seconds until i let go.
any help is appreciated.
Click to expand...
Click to collapse
That's odd issue. Lets see did ya try to chose the option phone in USB debugging mode then plug your usb cable and check if you get the usb mass storage in the notification bar so you can activate it from there? Also check the drivers in your pc just in case. Sorry if my English sounds bad english not my natal language.
Every action that failed is cable dependent. Try a different "known good" USB cable, or test your same cable with another smartphone. Test On/off while connected, Mass Storage PC connection and Download Mode if possible.
My phone only shows the the elephone 2 e sign when I turn it on. I have tried pressing the on and volume key when I turn it on but nothing happened. I have followed some instructions on the elephone manufacturer site about installing drivers to my computer and then trying to reinstall the firmware. Unfortunately my computers (I have tried on three different ones) does not identify that a device is connected to the computer. Therefore I can't proceed to install the driver as according to my computer it is not installed. I have tried 2 different leads as well. I would be grateful for some help as I have no idea where to go from here.
Facing a similar issue, and since there's still no reply to this thread, I would like to add up a few findings I have on this matter to maybe help others and get helped.
My P3000S is also reaching the Elephone logo and displays it for a minute and then restarts, repeating the process (aka boot-loop).
The same happens whether it is connected or not connected to the charger/computer through a USB cable. (I've tried new cables but that's not the case).
When disconnected I can stop the boot-loop only by holding down the on/off button for a few seconds (or removing the battery of course).
When connected to the the charger or computer through the USB cable I have no way to stop the boot-loop (holding down on/off just restarts it).
Now with the battery removed..:
If I connect it to the charger/computer, though the charging red light turns on normally, I can't turn on the phone using the on/off button.
However, when connected through USB to a windows computer, I can see in the device manager that, right when I connect the phone it shows up as "Mediatek Preloader USB VCOM Port" under COM ports group, for 1 second and then disappears as if it was disconnected. There's no repetition here I have to manually hold down the on/off button or disconnect and reconnect the phone from the cable to cause this to happen again.
So, I am unable to flash anything nor turn the phone on because I practically only have 1 second of its presence in my devices list.
Also, I have tried all possible combinations with the volume up/down keys and the on/off button in order to enter recovery mode, with no success..
In case anyone has faced something similar or has any ideas on a possible fix on this phone please feel free to reply.
At last a reply to my initial message. Unfortunately it was someone with the same problem as me. I took out a paypal case against the person I bought the phone from and eventually they repaired it. Unfortunately they never told me how. To make matters worse it broke again within 2 months. The phone is now sat in a draw doing nothing. I have given up on it and will never buy another Elephone phone again.
Hello there everyone, hope you guys are doing great. Well, this thread might be a bit stupid at first since many others might have posted something related to it but since I couldn't find the exact answer, I had to post a newer thread.
I have a Fire Phone which used to run great and perfect and I had been using it the other day while charging it with an Aspor Powerbank which does run great. The Fire Phone got stuck due to a few NOT FOR THE FIRE PHONE apps such as the Instagram and the rest. When stuck, I held the power button for 10-15 seconds to do a reset and it did work while it was still on charging. Now the phone wouldn't turn on without the AC power via the USB. It gets stuck in a boot-loop. Just shows the Amazon logo and restarts again. Nothing works at all, not even the recovery mode or the rest or even resets without the USB plugged in.
I did try to upgrade but was of no use at all, did try the Cynogen OS by flashing it in. It didn't work at all and the same issue persists. I have removed the battery and plugged it back in but again of no use. The battery does charge if you think it's the battery, The battery does stay there active and great. I did try changing the USB cable and the Adapter. Nothing!
One more thing, when plugged in to AC, I can go to the Recovery Mode and then remove the USB cable, the Recovery Mode does stay active on battery power for countless hours. What should I do?
Is it the USB port? Is the battery? Or is it just me?
Oh btw, I did try installing the Stock Update available on Amazon.com and the PC (Windows 8 64-bit) does recognize the phone on ADB mode. Does list the serial of the phone when connected but when side-loading an update via the ADB, it says that it doesn't read! Gives an error. How do I work on that? I did try installing the ADB drivers again but still nothing. Did try downloading the updates from other sites and even a downgraded file, nothing works. What should I do?