My opinion of the iMagnet dock has slipped a bit after having used it for a while now.
I got it at Amazon: http://www.amazon.com/gp/product/B008IOQ3K6/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1 and the price was right.
The mounting sticky suction cup works great and it is not too large so it is not obtrusive.
However ... the magnet is just not strong enough. Once you put a case on, the strength (or lack thereof) becomes more apparent.
I put an el cheapo s-view case on and since it covers the back instead of replacing the battery cover, the extra thickness insulates it from the magnet a bit too much.
Yes, it holds the phone. However, the choice of a round-shaped magnet may have been the big mistake.
Since the magnetic field is round, it allows the phone to pivot around the central axis and after a bit of driving, the phone tilts to one side or the other.
A rectangular magnet or at least a much stronger one would probably correct this.
When my Spigen Slim Armor case arrives I will try it out and see if the s-view case if just too thick or what.
I've had the whole phone rotating and less magnetic strength as you op. I used it with my s3 and put the metal plate inside the plastic on my seidio ext battery case. The phone was pretty heavy and it did hold pretty well. A good pothole could knock it off though. It'd be much stronger on the outside of the case but way to ugly.
Now I'm using a ballistic sgmaxx this case is way to thick to put it in the inside. Plus I have a wireless receiver for charging making it a no go. And on top of all that even if I placed the plate on the outside it blocks the wireless charging from working.
It really sucks because I loved that mount. No tabs to adjust, no pieces to break or lose, no clicking it in place and pushing a button to release.
nunjabusiness said:
My opinion of the iMagnet dock has slipped a bit after having used it for a while now.
I got it at Amazon: and the price was right.
The mounting sticky suction cup works great and it is not too large so it is not obtrusive.
However ... the magnet is just not strong enough. Once you put a case on, the strength (or lack thereof) becomes more apparent.
I put an el cheapo s-view case on and since it covers the back instead of replacing the battery cover, the extra thickness insulates it from the magnet a bit too much.
Yes, it holds the phone. However, the choice of a round-shaped magnet may have been the big mistake.
Since the magnetic field is round, it allows the phone to pivot around the central axis and after a bit of driving, the phone tilts to one side or the other.
A rectangular magnet or at least a much stronger one would probably correct this.
When my Spigen Slim Armor case arrives I will try it out and see if the s-view case if just too thick or what.
Click to expand...
Click to collapse
Any luck with the Spigen Slim Armor case? I have the Slim Armor right now and am debating this mount but after reading this thread, I'm a little skeptical. I was thinking to put the round disk between the TPU and Hard Shell of the case so that there's less insulation of the magnet.
I have had this mount for over 18 months starting with my s3. I can see where with the extended battery it may be an weight issue. I have the slim armor case and with the plate between the 2 layers (the hard plastic and the rubber) on my S4 it works great. even in the pot hole state of Michigan. I don't know if the other people are using the large plate that is included but its almost a must in order to keep the magnet in full contact with metal.
Funny enough, with the Spigen Slim Armor, it works better than the el cheapo sview I was using.
The $5 slim armor from AliExpress is just plain awesome, although a little hard to open..
I was thinking of getting one of these.. now I am not
shoutcast said:
I was thinking of getting one of these.. now I am not
Click to expand...
Click to collapse
Your missing out.
I'm going to have to figure out how to use one with wireless charging. Maybe a rare earth magnets instead.
blwnv8 said:
Your missing out.
I'm going to have to figure out how to use one with wireless charging. Maybe a rare earth magnets instead.
Click to expand...
Click to collapse
I swear I have been thinking that ever since I got it, I even wrote the MFR and told them if they put an induction charger in there somehow they would make a million fast.
Related
Well Ive pretty much gone always against the idea of getting a case but Im seeing one day my poor phone falling and breaking to pieces so rather be safe than sorry.
What I need:
- This is a question: Whats the difference between hard cases (plastic) and soft cases (rubber)? Obviously besides the material
- The phone with the case on MUST still be able to be inserted without major problems into the pockets of a jeans pants (I see this a bit for difficult for rubber cases)
- I would still like to access everything, button/port wise (except maybe the back cover)
- No difference in using the keyboard or the phone in general
- Very easy to remove and put on the case from and to the phone
- Seeing as the phone is kinda heavy as is, a light material would be nice.
- No reception issues
A clear or a green case would be my personal choices as clear the phone is still visible and I like the color green Also my media player use to have a kickstand which would be nice but I care less...
Thanks
from dustrho's thread about HTC cases
GREEN CASE
http://www.youtube.com/watch?v=UQObS6fsY6Q
http://www.wirelessground.com/t-mobi...ase-green.html
Otterbox Commuter case. Solid and rugged case that can withstand almost any abuse you throw at it. Fits nicely into my jean pockets and is easy to whip out when I need it. All buttons and ports are easily accessible. Bulks the phone up just alittle, but I would rather have the bulk and have the phone survive a 4ft drop than have a cheap or flimsy case and have both case and phone go to the garbage.
http://www.otterbox.com/HTC-G2-/-HT...HTC4-G2XXX_color=20&start=1&cgid=htc-g2-cases
Got mine with a free car charger on ebay for about $30
from dustrho's thread about HTC cases
GREEN CASE
http://www.youtube.com/watch?v=UQObS6fsY6Q
http://www.wirelessground.com/t-mobi...ase-green.html
Click to expand...
Click to collapse
Thats the first case I looked at and like. The link is to the rubber version but there is a plastic one as well. Im not sure which to get as I dont know the different "feel" between the two.
Otterbox Commuter case. Solid and rugged case that can withstand almost any abuse you throw at it. Fits nicely into my jean pockets and is easy to whip out when I need it. All buttons and ports are easily accessible. Bulks the phone up just alittle, but I would rather have the bulk and have the phone survive a 4ft drop than have a cheap or flimsy case and have both case and phone go to the garbage.
http://www.otterbox.com/HTC-G2-/-HTC...d=htc-g2-cases
Got mine with a free car charger on ebay for about $30
Click to expand...
Click to collapse
1: Way too expensive
2: Bulks the phone up (making it hard to slide in a pocket quickly)
3: Very very bad looking
The quality looks OK (with port covers and everything) but those 3 things and after viewing a video just throw me off.
The difference is just how it feels on your hands. Rubber has a slightly softer feel while the plastic one is smoother but almost slippery (doesnt slip, just feels like it due to its smoothness)
Go for that case if anything. Another way to get a real feel is to drop by a tmo store. They sell both types (atleast where i live) and you can handle it to see if u like it.
Sent from my Desire Z via XDA App
I got the otterbox commuter a while back. it's nice, rubber inside, hard plastick outside, two layer case. There is rubber covers for usb and headphone jacks.
Case has nice texture on the backside, gives nice grip.
If you use headphone whit bulky 3.5mm like steel series siberia, it wont fit in whit the case. but any earplugs will fit just fine.
case makes the power button more easily accessible, like it.
the camera button is ****ed up. it's way to hard to press, and you dont feel the 2-stage shutter whit this case, you could easily cut the button covering part of tough.
i have put it back on and of multiple times, ans i'm not using it anymore, my front cover has 2 broken clips that keep to case on :/
i trust my grip enough, so i'm not using cases anymore, I have hard plastic shelled belt pouch to carry my phone, so if i fell of a bike or something hits me in the pocket, this case in pouch, phone will be just fine.
-Whippler
riahc3 said:
Well Ive pretty much gone always against the idea of getting a case but Im seeing one day my poor phone falling and breaking to pieces so rather be safe than sorry.
Click to expand...
Click to collapse
These phones are harder to break than you would think. Mine has survived at least 5 falls from about a metre in height onto concrete, and just scuffed up the aluminum edges in two spots
Sent from my SilverBullet 'HTCDesireZ running CM7'
The difference is just how it feels on your hands. Rubber has a slightly softer feel while the plastic one is smoother but almost slippery (doesnt slip, just feels like it due to its smoothness)
Go for that case if anything. Another way to get a real feel is to drop by a tmo store. They sell both types (atleast where i live) and you can handle it to see if u like it.
Click to expand...
Click to collapse
But doesnt the rubber one have a "grip" as well? It would seem logical.
I got the otterbox commuter a while back. it's nice, rubber inside, hard plastick outside, two layer case. There is rubber covers for usb and headphone jacks.
Case has nice texture on the backside, gives nice grip.
If you use headphone whit bulky 3.5mm like steel series siberia, it wont fit in whit the case. but any earplugs will fit just fine.
case makes the power button more easily accessible, like it.
the camera button is ****ed up. it's way to hard to press, and you dont feel the 2-stage shutter whit this case, you could easily cut the button covering part of tough.
i have put it back on and of multiple times, ans i'm not using it anymore, my front cover has 2 broken clips that keep to case on :/
i trust my grip enough, so i'm not using cases anymore, I have hard plastic shelled belt pouch to carry my phone, so if i fell of a bike or something hits me in the pocket, this case in pouch, phone will be just fine.
-Whippler
Click to expand...
Click to collapse
Like I commented, the otterbox isnt for me.
These phones are harder to break than you would think. Mine has survived at least 5 falls from about a metre in height onto concrete, and just scuffed up the aluminum edges in two spots
Click to expand...
Click to collapse
Until it falls from one fall from 1/2 a meter into grass and it breaks.
Better to be safe than sorry about making this costly investment.
I never said the rubber one doesn't have a grip. in fact, if i remember correctly, it has such a grip that it keeps on pulling my pockets inside out. go figure.
and as I said, drop by a tmo store and check it out. you'll feel the difference and it'll help you more than just words of explanations.
Check this one out:
http://forum.xda-developers.com/showthread.php?t=1096776
This is the case I am using, LOVE IT!
Best case for me hands down is the oem g1 sock slip case thing.
No need for screen protectors, no scratches on screen now or later
Goes into any pocket, no rubber annoying crap
Costs 3 bucks on ebay
Fits even with the 3600mah mugen battery (big plus for me)
Sent from my T-Mobile G2 using XDA App
preferably rubberized battery cover door with a kick stand, that would be ideal
Check out Seidio. They have a few.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
I bought the case mate pop for the s4 (http://www.case-mate.com/Samsung-Galaxy-S4-Olo-Cases/Case-Mate-Samsung-Galaxy-S4-Pop-Cases.asp) I got it to use while I debated ordering a Spigen Neo Hybrid, but I have to say i'm liking it, the inside is not all rubber, the back part of it is, but the sides where the chrome bezel is is not all rubber there is plastic there, the case is a tight fit with rubber on all the open slots, i've used it for 2 days and it doesn't seem any dust has gotten in there. It quite tough to take out of the case, the case doesn't have much give which I think is a good thing, I might keep it. The stand is designed to work primarily in landscape and is pretty good, it will also work in portrait, its kind of hard to unclip it though which may also be a good thing since it wont come loose easily. Behind the kick stand there is a hole that leads to the battery cover but thats only exposed when the kickstand is out. The case is decently slim, doesn't add too much.
I second Seidio. I've had two of their cases before, and they're great. The Surface line is very slim but is compatible with their holster and their dock. I'll be ordering one for my S4 as soon as they have the color I want.
Erm ... not really.
Can anyone give some advice about a belt case/holster?
I'm thinking on the lines of this type http://www.amazon.co.uk/dp/B00OHFTPXM/ a horizontal case.
But, this don't usually last that long.
So, I was thinking about http://www.amazon.co.uk/Urvoix-Case-Cover-Samsung-Galaxy/dp/B00S6DQ37W/ a vertical canvas style.
But, I'm unsure using it with a belt and in vertical orientation would it just get in the way, sitting down, driving etc?
I'll probably be buying a case for the phone too.
Any advice please.
Thank you
I used to use belt holsters and cases but problem is this phone is so big the cases look like fanny packs Lol.
With that out of the way, I think the horizontal holders are better for when you sit down.
I'm using a Seidio CAPSA exoskeleton holster in horizontal orientation, with a UAG case. They fit perfectly together. If you search the forums someone on here has posted photos of this combination. If you rotate it to vertical it does get in the way a little when sitting down, so I use it horizontal.
http://www.seidioonline.com/samsung-galaxy-note-4-capsa-touchview-holster-p/hl4ssgt4ast.htm
DarkManX4lf said:
I used to use belt holsters and cases but problem is this phone is so big the cases look like fanny packs Lol.
With that out of the way, I think the horizontal holders are better for when you sit down.
Click to expand...
Click to collapse
Kinsman-UK said:
I'm using a Seidio CAPSA exoskeleton holster in horizontal orientation, with a UAG case. They fit perfectly together. If you search the forums someone on here has posted photos of this combination. If you rotate it to vertical it does get in the way a little when sitting down, so I use it horizontal.
http://www.seidioonline.com/samsung-galaxy-note-4-capsa-touchview-holster-p/hl4ssgt4ast.htm
Click to expand...
Click to collapse
Thank you both very much
I use an Otterbox Defender w/holster & don't have any issues sitting down w/ the phone in the landscape/horizon mode. I do take the phone off my belt in the car to use my Craig's Docks car dock/mount. I think your physique has a lot to do with the comfort of the phone when seated. I also have a horizontal nylon belt pouch I got from Amazon that fits the phone with the Defender case but I've never used it because I've had no problems with the Defender's holster. The nylon pouch would be very useful if you're in a warm climate & it's raining & you're outside a lot.
One thing I really like about the Defender holster is it allows the phone to be placed in the screen out position so I can see/use the screen when it's clipped on my belt (it's of course less protection than screen in but for me the functionality outweighs that). I do agree that the size of the N4 looks like you've got a tablet on your belt, it does look ridiculous but it is what it is.
The Defender is a high quality precision made case IMO and if you buy one online make sure you buy it either directly from Otterbox or directly from Amazon (not a third party reseller) as counterfeiting is rampant with them. Also you have to remove the included plastic screen protector & use something else for clarity & to prevent the constant dirt that accumulates through the opening for the home key w/ the installed screen protector.
I haven't used the exact same one that you listed, but I used a very similar design holster for my gs1 and that fake pleather material wore out pretty quick by the belt area. I can't believe I paid $15 for that. If you want to go vertical, I personally recommend it on the side. Would interfere if worn near the front. Out of those 2, I would say the nylon holster would last longer because of the 1000d cordura nylon, but I can't speak for the overall quality. The stitching might be shoddy and stuff could fall apart easily.
I used the supcase beetle case with holster, but the case and holster broke. The case could not take a huge impact. I wore the holster on my side horizontally and broke the belt clip getting out of the car. I am currently using a cheap otterbox defender type case with holster.
mty msi said:
I use an Otterbox Defender w/holster & don't have any issues sitting down w/ the phone in the landscape/horizon mode. I do take the phone off my belt in the car to use my Craig's Docks car dock/mount. I think your physique has a lot to do with the comfort of the phone when seated. I also have a horizontal nylon belt pouch I got from Amazon that fits the phone with the Defender case but I've never used it because I've had no problems with the Defender's holster. The nylon pouch would be very useful if you're in a warm climate & it's raining & you're outside a lot.
One thing I really like about the Defender holster is it allows the phone to be placed in the screen out position so I can see/use the screen when it's clipped on my belt (it's of course less protection than screen in but for me the functionality outweighs that). I do agree that the size of the N4 looks like you've got a tablet on your belt, it does look ridiculous but it is what it is.
The Defender is a high quality precision made case IMO and if you buy one online make sure you buy it either directly from Otterbox or directly from Amazon (not a third party reseller) as counterfeiting is rampant with them. Also you have to remove the included plastic screen protector & use something else for clarity & to prevent the constant dirt that accumulates through the opening for the home key w/ the installed screen protector.
Click to expand...
Click to collapse
burntrat said:
I haven't used the exact same one that you listed, but I used a very similar design holster for my gs1 and that fake pleather material wore out pretty quick by the belt area. I can't believe I paid $15 for that. If you want to go vertical, I personally recommend it on the side. Would interfere if worn near the front. Out of those 2, I would say the nylon holster would last longer because of the 1000d cordura nylon, but I can't speak for the overall quality. The stitching might be shoddy and stuff could fall apart easily.
I used the supcase beetle case with holster, but the case and holster broke. The case could not take a huge impact. I wore the holster on my side horizontally and broke the belt clip getting out of the car. I am currently using a cheap otterbox defender type case with holster.
Click to expand...
Click to collapse
Awesomes x2 Thank you
I think we can close this one now, if needed :good:
http://www.seidioonline.com/samsung...-kickstand-combo-black-p/bd2-hr3ssgt4k-bk.htm
iv been using the seido surface for about 6-7 months now and its still working great, spring on the holster still seems as strong as brand new, and its pretty slim compared to the other case+holster combos. it provides plenty of protection, iv dropped my phone at least 10 times since november, each time onto hard surface floors from about waist high (im 5 foot 11), and each time i remove the case to see what damage i caused and surprised to see that my phone itself still it perfect cosmetic condition. no scratches or scuffs anywhere on the edges or corners. phone sits pretty snug into the clip, it has NEVER came off on its own. if something were to go wrong with this case ill definitely buy another one.
Read my thread about Seidio & buying form their online store.
http://forum.xda-developers.com/note-4/accessories/dont-want-to-buy-seidios-webstore-t3036913
I have to initiate a chargeback w/ the bank that issued the credit card I used to get a refund. Seidio refunded zero.
Seido's online store is a joke if you have a problem w/ one of their products. By far the worst experience I've ever had purchasing online.
The Surface is a decent case but completely overpriced. Only reason I got one was to turn into the Surface w/ holster which was complete garbage, both the case & the holster. Everytime I moved the phone fell off the beltclip, is was unusable. And yes, I did have the case locked to the beltclip.
For the price Seidio charges for the Surface it should have rocker switch covers at a bare minimum. You can spend a fraction of the cost of a Surface & get a far nicer case.
Best Buy sells the Surface as their Platinum series at half the price Seidio charges.
IMO Seidio = garbage.
Maxpedition
Ever since I starting using tactical pouches with my iPhone 5s, I have continued to do so with my Note 4. I use Maxpedition pouches, as they are made of 1050d ballistic nylon. They are quite excellent.|
When I'm at work, during my food vendering stuff, I use their TC-3 pouch. However, I rock their leg pouch for any other events. Since I run around with no case on my phone except for the leg pouch and the small pouch that my phone and cards slip in, I am quite pleased with the setup. Excellent durability and I can carry my expensive IEMs, wallet, phone, and a couple extras with no problem.
Thank you all for the additional post and information
After a lot of head scratching I ordered the vertical case (2nd link in my OP).
I'll use it as a starting point and try other cases once I get my Note 4 through the post.
Hello Everyone,
New Note 4 user here, (yeah sounds strange upgrading from the note 3 finally, but samsungs gone full potato) and like any other purchase, the hunt for cases is on. I have scoured the internet/ebay/threads for possible solutions to my dilemma and haven't found anything, so I figure its a good time to ask. With my N3 I had the Seidio Dilex Extended battery case with the belt clip holster. This was an amazing combo and accounted for 99% of my needs, minus the stupid negative incline when the phone was flat on its back, due to the kickstand bulge.
Anyways, I am having a hell of a hard time finding extended battery cases that have a kickstand, or have the plastic belt clip holsters for that matter. Essentially it looks like its the Zerolemon and thats it for holster combos, or if I want an integrated kickstand, its the mugen, for outrageous pricing.
I had originally hoped that I'd be able to reuse the same case and such from my n3 with some modifications, since these two phones are very close in size. Well that got quickly abandoned, but there was still the possibility of using the seidio case and cover/holster since they appeared to be the same dimensions. Wrong again.
The sides of the case have much steeper angle coming out from the phone on the bottom and top, but could possibly be adjusted depending on how or if I can rework the holster.
and the top
I have found a temporary starting point to try and reclaim some of the utility I had with my N3 with a few random pieces from amazon.
Anker has been out of stock for a while, unless you want to pay scalper prices on ebay, so I figured I'd give Kranich a whirl for the $25 they asked for 6400mah battery and the plastic textured back panel.
Next I picked up a generic tpu honeycomb case (hopefully this is better than the plastic crap I had on my SIII) for $10 https://www.amazon.com/gp/product/B00S1581X4/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
and lastly found a neat little gadget for another $10, a magnetic kickstand with adhesive. https://www.amazon.com/gp/product/B01HP15P60/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
My plan should it go well, is to try and either cut a loop in the tpu case and secure the kickstand to the plastic backing itself, or to the tpu on the outside if thats not possible. Either way, ill make sure to correct the confusing mistake seidio made by putting the kickstand on the bottom of the phone and having it lay with the bottom of the phone slightly elevated instead of flat.
This should get me back to at least the core level of performance that the seidio case I had before offered, with a little less protection I think.
The last problem however, is the belt holster (or whatever you want to call it). Again, not many options, so I am looking at modifying my existing seidio holster to fit my N4 or possibly getting an otterbox holster and trying to work with that. You know, interestingly enough, I figured Alibaba would be swarming with weird stuff like that, and I really didn't see anything different
If anyone has any bright ideas, I'd love to hear it. Or for that matter any other cool suggestions for gear.
==============================Update #1==========================================
TPU case came in, god this stuff still sucks, and spigen kcikstand as well. After slipping my note 4 into something more sensual, I decided it was time to try out the holster, which I prayed to the case gods would still fit, and i-it d-d-does! Success! It does in deed definitely fit securely in the mount, albeit a it rides a little higher in the clip due to being ever so slightly longer that the note 3 with the seidio case (works for me still).
Far Away shot.
Damnit, point and shoots are picky when shoplights are involved.
Now that the first test was an overwhelming success, I decided it was time to make some cuts and drop the kickstand in, maybe risk some fingers or violate some safety rules. I decided to cut my way through the TPU case (while half listening to a linus tech tips webisode) and attach the kickstand directly to the phone case for more stability and a slightly smoother surface and a little more professional look. Results below:
First was to figure out where to put the case, I noticed that the first set of honeycombs was almost a perfect border for the ends of the kickstand and those served as an excellent guide for my first cuts.
To achieve a straight cut, i used a square razor blade and tapped it down through the tpu into an old notepad. this have a nice clean straight edge, id soon have to murder since it was nowhere near wide enough for accommodate the whole kickstand. A halfway picture would have been nice, but I was eager to finish.
If you do decide to copy this, make sure you cut the material, almost too tight for the kickstand, so it fits snugly, instead of stretching and leaving a gap like mine did. I would have liked to have rounded my edges a little better, but oh well, its not like I bought the phone to look at the back.
In any case(oh god not the puns), I think it worked out pretty well, but I think I'm gonna try and find a few more TPU cases, maybe that are a little spongier since this hardly gives any protection for drops. An added benefit is the lip of the kickstand in this spot serves as a nice rest for your fingers while using the phone.
I own and use the Thor Champagne Gold version of this one for more than 18 months now: https://www.amazon.com/Galaxy-Note-Verus-Charcoal-Black/dp/B00MHBSHYG
and am very happy with it. Have dropped the Note4 while bicycling, and from other stupid high positions on stone, it has saved my Note4 many a time. These verus cases rock!
So try that brand, I bet you they have what you need.
Switched from Hyperion 8000mah with honeycomb tpu, now using Verus Iron Shield with Spigen kickstand add on and purchased 3 extra batteries with external charger for $23 US from Amazon. I have leather holster, but front pocket works just fine.
jult said:
I own and use the Thor Champagne Gold version of this one for more than 18 months now: https://www.amazon.com/Galaxy-Note-Verus-Charcoal-Black/dp/B00MHBSHYG
and am very happy with it. Have dropped the Note4 while bicycling, and from other stupid high positions on stone, it has saved my Note4 many a time. These verus cases rock!
So try that brand, I bet you they have what you need.
Click to expand...
Click to collapse
That looks and sounds amazing, and reminds me of some of the drops my note 3 has taken and survived. This is what I really, really wanted to reproduce with my note 4, because, well it makes sense. Only problem is, I really want an extended battery since charging is much slower than my n3, and I don't want to rely on batteries.
tbvnz said:
Switched from Hyperion 8000mah with honeycomb tpu, now using Verus Iron Shield with Spigen kickstand add on and purchased 3 extra batteries with external charger for $23 US from Amazon. I have leather holster, but front pocket works just fine.
Click to expand...
Click to collapse
It looks goregeous, but I'm a little concerned about dampening shock, TPU doesn't seem to be the best at it..
I see a lot of the cases don't actually offer any hinge protection and if you drop the phone right on the edge with the hinge, something might break.
I am looking to see what cases with hinge protection are available. So far I have only found 1 : Spiegen Tough, but it is bulky, personally I am looking for something more minimalistic.
Are there any other options?
I have preordered the UAG Civilian Series Case. But I guess it’s also pretty bulky
I've found this one. Will be giving it a go when I get mine in a couple of weeks - https://www.mobilefun.co.uk/araree-nukin-360-samsung-galaxy-z-flip-3-case-crystal-clear-85997
What i found so far:
Spigen Tough Armor
UAG Civilian
VRS Active
Araree Aero Flex
Araree Nukin 360
Goospery ZFLP3
Mercury Fard (same as Goospery)
I returned Tough Armor as i find it's too bulky for me... will give Araree and Goospery a try
I want something like the araree aeroflex but clear!
D4rk4 said:
I want something like the araree aeroflex but clear!
Click to expand...
Click to collapse
Samsung make clear case with ring. I’ll be getting for free with my preordered Zflip 3, but I opted for VRS case.
Spec-V said:
Samsung make clear case with ring. I’ll be getting for free with my preordered Zflip 3, but I opted for VRS case.
Click to expand...
Click to collapse
I ordered one in the first place, too. But its a pain to plug the loose parts and phone together and it gives minor hinge protection as the strip is way too narrow and the ring can touch or scratch the hinge in your pocket as well in some angles...
btw. meanwhile i got the Goospery/Mercury Case here, it's nice looking and feeling but sits very loose (i don't use the adhesive tape at first) so that the top part of the case detaches from the phone when flipping open, very annoying :/ my hopes are for the araree aero flex now, should get it delivered these days...
I've ordered the araree aeroflex. Will report back when it arrives in a week or two.
I got my Araree aero flex today and i'm in love... perfect fit, perfect feeling BUT there is one big problem: when the phone is fully closed and i open it the hinge protection doesnt slide properly inside the lower case. It needs a little push with the finger. I improved it by putting a little Tesa on the inside of the lower case (above the factory sticker which should NOT be removed) and now it slides better but not everytime...
Whatever you do, stay away from that Samsung clear case with the ring. First case in my life that I had to read the user guide and search YouTube on how to install on phone.
Two pieces of plastic, that hold the ring, has to fit perfectly between the case and the phone. If they are not align properly, the case will not fit the phone. And it's almost impossible to align that s**t. It has no adhesive to keep it in place.
Went with the Spigen Tough Armor case myself and yeah like someone else said, it's definitely bulky (thick as a pack of cigarettes when closed) but it looks like it will offer very good protection, and I work in the construction industry so I'll take all the protection I can get.
Just noticed another Flip 3 case with hinge protection on Etsy, I dont know nothing about the seller (always bought the wallet cases from the seller "Hand & Hide" from USA on there for my slab phones) but these from the seller "Andantannerie" (from South Korea) look interesting, although $115 is a bit expensive, if they're actually full grain leather they just might possibly be worth it (but upon closer inspection of the pics they look like they might be made from a very thin layer of leather over a plastic shell though)......... https://www.etsy.com/listing/1060335374/premium-leather-galaxy-z-flip-3-case-3?ref=shop_home_recs_1&crt=1&variation0=2201540456
UPDATE: No doubt about it the leather is paper thin, sent the seller an email asking about it and he replied it was 2.5 to 3.5mm thick (about a tenth of an inch) and I replied as to whether that was the thickness of the entire case itself or the leather covering on it, in turn he sent me a photo of him measuring it and he was measuring the thickness of the entire case. Got to give him credit the cases do look nice on his product pics though, but not no where near a $115 nice.......
HDCowboy said:
Went with the Spigen Tough Armor case myself and yeah like someone else said, it's definitely bulky (thick as a pack of cigarettes when closed) but it looks like it will offer very good protection, and I work in the construction industry so I'll take all the protection I can get.
Click to expand...
Click to collapse
Ordered the same one. Wasn't sure about the adhesive, but after 5 different installations (trying various cover screen protectors), it still holds without any of the wiggle or creaking you get on an Otterbox that clips together. It isn't the most amazing hinge protection, but its enough. The case feels less bulky the more I use it and definitely makes the phone feel more sturdy.
I bought an Araree AERO Flex for my Flip 3 and it works fine. It was available on Amazon but became unavailable shortly after I got mine. It is not bulky and has hinge protection. Feels good in hand too. This case does not require any adhesive tape or pad. It just snaps onto the phone securely.
Just check Amazon from time to time and it could be available again. Maybe it is out of stock due to popularity.
I have the same araree case. Great case, no bulk, feels nice in the hand, smudge free. Definitely recommend it.
chompx2 said:
I bought an Araree AERO Flex for my Flip 3 and it works fine. It was available on Amazon but became unavailable shortly after I got mine. It is not bulky and has hinge protection. Feels good in hand too. This case does not require any adhesive tape or pad. It just snaps onto the phone securely.
Just check Amazon from time to time and it could be available again. Maybe it is out of stock due to popularity.View attachment 5407609View attachment 5407611View attachment 5407613View attachment 5407615
Click to expand...
Click to collapse
D4rk4 said:
I have the same araree case. Great case, no bulk, feels nice in the hand, smudge free. Definitely recommend it.
Click to expand...
Click to collapse
does your aeroflex cases flip open smoothly when fully closed or do you have to give the hinge protection a little push?
It does now. On the first night I got it, I did have to place my finger over the hinge protection a couple of times to help push it down. But it seems to have sorted itself out now.
I did take it off and put it back on on the 2nd day, so maybe it wasn't sat properly the first time I put it on?
When it was new, the hinge cover did not slide into the slot smoothly. It even pushed the bottom case down when I opened the phone from the closed position. It was not a big deal as I could easily push up the bottom half of the case back up. I took the case off the phone and examined it but found nothing out of the ordinary. After I reinstalled the case, it never happen again. After some use, the hinge cover is sliding back into the case fine. However, if I open the phone rapidly, the hinge cover would bulge out and then snap back into the case. Never, did require me to push on it to help it to slide back. A new car would require some run-in period for its engine. I expect this hinge cover should soften up and loosen up after some more use.
chompx2 said:
When it was new, the hinge cover did not slide into the slot smoothly. It even pushed the bottom case down when I opened the phone from the closed position. It was not a big deal as I could easily push up the bottom half of the case back up. I took the case off the phone and examined it but found nothing out of the ordinary. After I reinstalled the case, it never happen again. After some use, the hinge cover is sliding back into the case fine. However, if I open the phone rapidly, the hinge cover would bulge out and then snap back into the case. Never, did require me to push on it to help it to slide back. A new car would require some run-in period for its engine. I expect this hinge cover should soften up and loosen up after some more use.
Click to expand...
Click to collapse
Which case?
twistedumbrella said:
Which case?
Click to expand...
Click to collapse
Araree AERO Flex.