Database Info

Stock OTA Update and Checking the Status of your Phone

I'm using the default ROM for my One X and I'd like to update it (I haven't since I got it 6 month ago); do I need to re-lock the bootloader and unroot it before I can use the OTA update? Also it's been a while since I even fiddled with my phones software so I forgot anything else I may have done, is there a way I can check to see what else has been done and if it's safe to update it?
Currently I have:
Android Version: 4.0.3
HTC Sense Version: 4.0
Software Number: 1.73.631.1
HTC SDK API Level: 4.11
HTC Extension Version: HTCExtension_403_1_HA_4

What firmware are u on currently for starters
Sent from my HTC One XL using xda app-developers app

I added the info to the original post

bman3k said:
do I need to re-lock the bootloader and unroot it before I can use the OTA update?
Click to expand...
Click to collapse
Your phone should be factory default before performing OTA updates or results may be unexpected.
Most OTA updates are patch file based and require the files to be exactly what is expected.
There have been known issues with root being detected and the OTA failing.
Rooted phones progressing with an update but root lost after the update.
System files being modified and the OTA failing.
Recovery must be factory; not TWRP or CWM.
CID and MID must suit OTA.
The only modification I would consider safe through all OTA's so far has been SuperCID.

If you have any interest in rooting and flashing custom ROMs, I would suggest rooting and unlocking the bootloader now, while you are on 1.73, and not updating via OTA. The latest 2.20 update will also update your hboot, which plugs the holes by which kernels and radios can be flashed from recovery.

Since you're with att you can expect the jelly bean update any time from now till the end of the world which isn't fun waiting for .. I'd suggest if you were rooted download goo manager flash twrp....than flash a solid ics Rom if your prefer ice sense or you can go venture into the jb realms

omario8484 said:
Since you're with att you can expect the jelly bean update any time from now till the end of the world which isn't fun waiting for .. I'd suggest if you were rooted download goo manager flash twrp....than flash a solid ics Rom if your prefer ice sense or you can go venture into the jb realms
Click to expand...
Click to collapse
Agree. If you are already BL unlocked and rooted, why go through the hassle of relocking the BL and returning to stock, just to wait for the OTA?
Just flash a JB ROM, as there are already stock and custom JB ROMs posted in Development.
Plus, until the OTA actually hits, we don't know if it will even be rootable. They have plugged the existing root exploits with every successive AT&T OTA for this phone so far. No reason to think any different for the JB update.
Just flash a JB ROM and stay rooted.

Ya I really like viper xl v3 . Just apply fix listed on op and you should be good to go
Sent from my HTC One XL using xda premium

Stock OTA is not WORTH IT IMO, been there
Reselling the phone is probably the only reason i'd revert to stock.

Ok, so I tried to flash Android Revolution HD 18.0 instead of going back to stock. I used TWRP, but it said "unable to read zip file" and the flash failed, now my phone won't start up it just shows the HTC screen with "this build is for development purposes..." and continuously turns on and off.

bman3k said:
Ok, so I tried to flash Android Revolution HD 18.0 instead of going back to stock. I used TWRP, but it said "unable to read zip file" and the flash failed, now my phone won't start up it just shows the HTC screen with "this build is for development purposes..." and continuously turns on and off.
Click to expand...
Click to collapse
Ok you're really lucky you didn't just brick your phone.... You want to stay in the att one x forums.... Notice theres a title diff. You're lucky it didn't succesfully flash or your phone would be dead... That's an international one x rom

bman3k said:
Ok, so I tried to flash Android Revolution HD 18.0 instead of going back to stock. I used TWRP, but it said "unable to read zip file" and the flash failed, now my phone won't start up it just shows the HTC screen with "this build is for development purposes..." and continuously turns on and off.
Click to expand...
Click to collapse
Stick to the ROM's in our forum, I never heard of anything like that ROM for our phone sorry. Lucky you didn't brick it

O damn I feel very stupid now...
Can someone recommend me a JB ROM?
Also how would I even install one now? The AR HD one was the only ROM I had on my SD card
Edit: I figured out the Mount function in TWRP, so I know how to add new ROMs now

bman3k said:
O damn I feel very stupid now...
Can someone recommend me a JB ROM? Also how would I even install one now? The AR HD one was the only ROM I had on my SD card
Click to expand...
Click to collapse
Try them all, they are all good, the time it takes to ask for other peoples opinions you could have test driven them all yourself.

Are you looking for jb sense?

omario8484 said:
Are you looking for jb sense?
Click to expand...
Click to collapse
I'm just going to try a couple like wrecker suggested now that I've figured out how to flash ROM's properly
Thanks for your guys' helps
Is there a way to back up my apps/texts and stuff when flashing ROM's? I totally forgot about that and lost all of it, I didn't have anything particularly important, but it'd be a hassle to redownload everything everytime. I had Titanium Backup, but that's not a recovery for if you reflash right?

bman3k said:
I'm just going to try a couple like wrecker suggested now that I've figured out how to flash ROM's properly
Thanks for your guys' helps
Is there a way to back up my apps/texts and stuff when flashing ROM's? I totally forgot about that and lost all of it, I didn't have anything particularly important, but it'd be a hassle to redownload everything everytime. I had Titanium Backup, but that's not a recovery for if you reflash right?
Click to expand...
Click to collapse
Funny that you bring titanium up...titanium helps you back up apps it also backs up your app data...and for sms just download something from the market here's one download the app super backup and you can backup your sms

So I installed Cyanogen 10.0.0 but it didn't come with Google Play so I installed Gapps as well; now I keep getting the "Android Keyboard ASOP has stopped working" and I can't do anything. I've tried multiple versions of Gapps but they all give the error. I've also tried installing a keyboard apk on it's own but I am still unable to type anything.
Edit: Also when I downloaded Google Play as an apk separately it would crash immediately, but when I installed it from Gapps it was ok.

bman3k said:
So I installed Cyanogen 10.0.0 but it didn't come with Google Play so I installed Gapps as well; now I keep getting the "Android Keyboard ASOP has stopped working" and I can't do anything. I've tried multiple versions of Gapps but they all give the error. I've also tried installing a keyboard apk on it's own but I am still unable to type anything.
Edit: Also when I downloaded Google Play as an apk separately it would crash immediately, but when I installed it from Gapps it was ok.
Click to expand...
Click to collapse
You did a full wipe before hand right?

I did the factory, system, cache and dalvik cache wipes
Edit: I got it to work, not really sure what I did different =/

Need some help

in this thread here (http://forum.xda-developers.com/showthread.php?t=2504712&highlight=baseband) is a thread about flashing a new baseband. I need to know if someone can pull the baseband from 12.15.15.
heres the situation. I received a replacement device from Verizon today as the camera on my current maxx keeps failing to initialize (low and behold as soon as the new phone arrives, the old one starts working LOL)
Any who..i wanted to root the phone and then update to 4.4 and since this phone shipped with 4.2.2 i figured why not try Jcase's methods.
Soooooo i made the mistake of using House of Moto and flashing the 12.15.15 firmware over top of the current OS instead of flashing the update file. Big MISTAKE. the phone booted and was fine..except no radio. no signal. baseband was missing. completely. sooo i decided to do a factory reset. now the phone wouldn't go past the activation screen. So i searched out the forums and found the thread above. but I believe the baseband is for the MotoX and the revert that is posted is for 12.7.7.. either way..the flash was successful and the phone boots and runs fine.. However..upon trying to upgrade to 4.4 it gives me an error message about the modem having unknown contents. Which leads me to believe that the baseband i reverted to is the 12.7.7 not the one for 12.15.15. Now the phone goes right to AP Fastboot and says 'Partition (boot) Security Version Downgraded. If i can flash the correct modem files, i can then try and reapply the update. Im going to see if i can FXZ back to 12.15.15 again. but who knows if it'll work
Can anyone help me?

dano1282 said:
in this thread here (http://forum.xda-developers.com/showthread.php?t=2504712&highlight=baseband) is a thread about flashing a new baseband. I need to know if someone can pull the baseband from 12.15.15.
heres the situation. I received a replacement device from Verizon today as the camera on my current maxx keeps failing to initialize (low and behold as soon as the new phone arrives, the old one starts working LOL)
Any who..i wanted to root the phone and then update to 4.4 and since this phone shipped with 4.2.2 i figured why not try Jcase's methods.
Soooooo i made the mistake of using House of Moto and flashing the 12.15.15 firmware over top of the current OS instead of flashing the update file. Big MISTAKE. the phone booted and was fine..except no radio. no signal. baseband was missing. completely. sooo i decided to do a factory reset. now the phone wouldn't go past the activation screen. So i searched out the forums and found the thread above. but I believe the baseband is for the MotoX and the revert that is posted is for 12.7.7.. either way..the flash was successful and the phone boots and runs fine.. However..upon trying to upgrade to 4.4 it gives me an error message about the modem having unknown contents. Which leads me to believe that the baseband i reverted to is the 12.7.7 not the one for 12.15.15. Now the phone goes right to AP Fastboot and says 'Partition (boot) Security Version Downgraded. If i can flash the correct modem files, i can then try and reapply the update. Im going to see if i can FXZ back to 12.15.15 again. but who knows if it'll work
Can anyone help me?
Click to expand...
Click to collapse
Try the fxz it should work it will reset everything.

bigv5150 said:
Try the fxz it should work it will reset everything.
Click to expand...
Click to collapse
tried to FXZ to 12.15.15 but because the recovery has been updated to 4.4 recovery...it won't fxz. still gives me the security version downgrade error. Looks like i might have to wait until the FXZ for 4.4 comes out for the Maxx
And..(for now) the camera in my other maxx is working LOL sooo i just throw my sim back in that one for the time being. Hopefully the camera doesn't fail again.

dano1282 said:
tried to FXZ to 12.15.15 but because the recovery has been updated to 4.4 recovery...it won't fxz. still gives me the security version downgrade error. Looks like i might have to wait until the FXZ for 4.4 comes out for the Maxx
And..(for now) the camera in my other maxx is working LOL sooo i just throw my sim back in that one for the time being. Hopefully the camera doesn't fail again.
Click to expand...
Click to collapse
there's and FXZ for 4.4 floating around here somewhere
Edit: and here it is https://www.dropbox.com/sh/om9j3iys8em3ccf/2r5u7m-h4d

I have to go to work.. But I will download when I come home. I hope this works lol
Sent from my XT1080 using xda app-developers app

BladeRunner said:
there's and FXZ for 4.4 floating around here somewhere
Edit: and here it is https://www.dropbox.com/sh/om9j3iys8em3ccf/2r5u7m-h4d
Click to expand...
Click to collapse
Thanks for that link man. I downloaded the file while i was at work..and used Fastboot to manually flash the entire OS completely. Phone is 100% up and running again.. AND!! The camera works!!

[Q] Help! Rooted phone with Custom Mode, ROM Manager Bricked

Hey guys,
I just got my phone and it updated to 4.4 pretty much out of the box. I still wanted to root so I used a method I found on here (will find if necessary) which is supposed to not trip the KNOX by putting the phone into "Custom Mode." Everything went fine until I tried to use ROM Manager to install CM.
When I boot I get the message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." I've tried reflashing using Odin, clearing the cache and factory resets, but I get the same error every time.
I'm currently downloading another stock ROM which might work, but I wanted to see if anyone else has had this problem?
Thank you!

mortified21 said:
Hey guys,
I just got my phone and it updated to 4.4 pretty much out of the box. I still wanted to root so I used a method I found on here (will find if necessary) which is supposed to not trip the KNOX by putting the phone into "Custom Mode." Everything went fine until I tried to use ROM Manager to install CM.
When I boot I get the message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." I've tried reflashing using Odin, clearing the cache and factory resets, but I get the same error every time.
I'm currently downloading another stock ROM which might work, but I wanted to see if anyone else has had this problem?
Thank you!
Click to expand...
Click to collapse
You are permanently stuck on the TW 4.3 OTA because the bootloader is signed with special keys that prevents:
-installing a custom recovery
-flashing custom roms/kernels
-downgrading your software below 4.3
If you can boot into download mode, do this 4.3 soft brick method.
With TW 4.3 OTA, all you can do is root using a tool called: Saferoot.

If you have 4.3 stock firmware you can root and that's it, no custom recovery, no custom rom, kernel, nothing, and just a heads up there are like 10 threads where people don't read and have done what you have, you need to flash the Odin 4.3 image for you phone to work again, never take an ota, enjoy your locked down device now
Sent from my SCH-I535 using XDA Premium 4 mobile app

SlimSnoopOS said:
You are permanently stuck on the TW 4.3 OTA because the bootloader is signed with special keys that prevents:
-installing a custom recovery
-flashing custom roms/kernels
-downgrading your software below 4.3
If you can boot into download mode, do this 4.3 soft brick method.
With TW 4.3 OTA, all you can do is root using a tool called: Saferoot.
Click to expand...
Click to collapse
Worked perfectly! Thank you so much!

mortified21 said:
Worked perfectly! Thank you so much!
Click to expand...
Click to collapse
My pleasure but all the thanks is owed to ThePagel, make sure to post your success in his thread. The more people that report their success with that method, then the less fear someone else may have in using that should they suffer the same experiences. :victory::good::good:
If you need any updates on the state of TW 4.3 then keep this discussion thread bookmarked.

I did the same thing today. The 4.3 update installed by itself!!! So i rooted it using Saferoot,
i installed rom manager, clicked the Install rom from sd card and i got that message. it will repeat that message and it wont boot. So i went into Odin mode and hit the volume down button to restart it. And after that it booted normally.
So basically i am stuck with 4.3? and is there 4.4 out for our phones yet?
also forgot to mention, it says my OS is custom when i first realized it updated.

AURMEND said:
I did the same thing today. The 4.3 update installed by itself!!! So i rooted it using Saferoot,
i installed rom manager, clicked the Install rom from sd card and i got that message. it will repeat that message and it wont boot. So i went into Odin mode and hit the volume down button to restart it. And after that it booted normally.
So basically i am stuck with 4.3? and is there 4.4 out for our phones yet?
also forgot to mention, it says my OS is custom when i first realized it updated.
Click to expand...
Click to collapse
Once you successfully updated with 4.3, you stuck with 4.3, there is no going back or flash anything and 4.3 is the latest factory rom for now. There's no 4.4 yet for our phone. There is custom 4.4 but only for people who didn't take the 4.3 update. Since they still have unlocked bootloader so they could load any custom rom.

buhohitr said:
Once you successfully updated with 4.3, you stuck with 4.3, there is no going back or flash anything and 4.3 is the latest factory rom for now. There's no 4.4 yet for our phone. There is custom 4.4 but only for people who didn't take the 4.3 update. Since they still have unlocked bootloader so they could load any custom rom.
Click to expand...
Click to collapse
Dang this sucks. I have no idea how it installed automatically then. I was listening to music the whole time. And I was trying to get a custom 4.4 after the update...

AURMEND said:
Dang this sucks. I have no idea how it installed automatically then. I was listening to music the whole time. And I was trying to get a custom 4.4 after the update...
Click to expand...
Click to collapse
Yep! sucks big time!!

[Q] [URGENT] setup wizard crash! Can't use my tab

Hi. I'm new here. Idk much.
So basically i owned a galaxt tab 2 7.0 gt p3110. i've flash custom rom pac rom 4.3 and i find it abit laggy. So i decided to flash stock rom 4.2.2 with mobile odin. After its done flashing. It needs to setup the tab. After pressing start on the "select language" a message popup saying "unfortunately, Samsung setupwizard has stopped" . Can anyone help me with this? I've been searching for the solution but all i see is something needs to be done with cwm recovery while i'm only having stock recovery.

wxlker said:
Hi. I'm new here. Idk much.
So basically i owned a galaxt tab 2 7.0 gt p3110. i've flash custom rom pac rom 4.3 and i find it abit laggy. So i decided to flash stock rom 4.2.2 with mobile odin. After its done flashing. It needs to setup the tab. After pressing start on the "select language" a message popup saying "unfortunately, Samsung setupwizard has stopped" . Can anyone help me with this? I've been searching for the solution but all i see is something needs to be done with cwm recovery while i'm only having stock recovery.
Click to expand...
Click to collapse
since its based on Cyanogemond aswell i think that is the problem because i would get the same thing when i flashed Cyanogemond 10.2 on my tab 2 10.1, did you flash nightlies?

Trozzul said:
since its based on Cyanogemond aswell i think that is the problem because i would get the same thing when i flashed Cyanogemond 10.2 on my tab 2 10.1, did you flash nightlies?
Click to expand...
Click to collapse
I couldnt recall actually. I'm not so sure. But i think its nightlies
But now i flash with official stock rom and i dont understand why this happen

wxlker said:
I couldnt recall actually. I'm not so sure. But i think its nightlies
But now i flash with official stock rom and i dont understand why this happen
Click to expand...
Click to collapse
so your fine now and able to use the tab? as for the rom you would just have to post on the rom page.

Trozzul said:
so your fine now and able to use the tab? as for the rom you would just have to post on the rom page.
Click to expand...
Click to collapse
The setupwizard crash and i cant use my tab without bypassing the setupwizard. Is there anyway to bypass it?

wxlker said:
The setupwizard crash and i cant use my tab without bypassing the setupwizard. Is there anyway to bypass it?
Click to expand...
Click to collapse
I looked up the problem and some people bypassed it by swipping up from the bottom(sounds werid I think they might mean the status bar) and going to settings enabling WiFi will bypass it.
Edit: oh your on stock right now,vi think it might be a bad flash otherwise you need to ask your tablets official forum, this looks like a problem only they can fix if its on stock. Sorry for the misread.

Trozzul said:
so your fine now and able to use the tab? as for the rom you would just have to post on the rom page.
Click to expand...
Click to collapse
Trozzul said:
I looked up the problem and some people bypassed it by swipping up from the bottom(sounds werid I think they might mean the status bar) and going to settings enabling WiFi will bypass it.
Edit: oh your on stock right now,vi think it might be a bad flash otherwise you need to ask your tablets official forum, this looks like a problem only they can fix if its on stock. Sorry for the misread.
Click to expand...
Click to collapse
I cant swipe down the statusbar. It does nothing. So can i flash with odin to fix this probem?

i think you reflash it in odin but if the problem still persists ask here http://forum.xda-developers.com/galaxy-tab-2/help

Help Deodexing stock rom-Verizon i535PP

im in need of help deodexing. i used the universal deodexer and didnt get proper start up. it became stuck on verizon logo. i reflashed the firmware so its like new again. question is how to properly deodex the stock rom so i can theme status icons? maybe some zip file that i can use in safestrap to make things easier. oh im using verizon prepaid galaxy s3 which is i535PP. any help is appreciated

bjf189 said:
im in need of help deodexing. i used the universal deodexer and didnt get proper start up. it became stuck on verizon logo. i reflashed the firmware so its like new again. question is how to properly deodex the stock rom so i can theme status icons? maybe some zip file that i can use in safestrap to make things easier. oh im using verizon prepaid galaxy s3 which is i535PP. any help is appreciated
Click to expand...
Click to collapse
If root can even be obtained this might be an option, otherwise your probably out of luck
Sent from my Nexus 5

Root has been obtained @ShapesBlue
Nobody has created a ROM for i535PP users yet(the i535 roms run but no wifi/data). And you're correct about having to use safestrap to flash it.If you're comfortable with a bash terminal you can try using one of the various tools found around here to modify the stock rom. If you're not then I'll see what I can do this weekend and try to get something for us i535pp users (after a day or so of testing)

ShapesBlue said:
If root can even be obtained this might be an option, otherwise your probably out of luck
Sent from my Nexus 5
Click to expand...
Click to collapse
Ok, there wasn't really a need to mention me in this thread. Everytime someone does that I get an email. And just because root has been obtained doesn't mean you can flash roms via safestrap
Sent from my Nexus 5

ShapesBlue said:
Ok, there wasn't really a need to mention me in this thread. Everytime someone does that I get an email. And just because root has been obtained doesn't mean you can flash roms via safestrap
Sent from my Nexus 5
Click to expand...
Click to collapse
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.

OpenSourcererSweg said:
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.
Click to expand...
Click to collapse
Its cool. Good to see safestrap works on the prepaid version also
Sent from my Nexus 5

I'm not sure what a bash terminal is unless it's the same thing as the terminal emulator. I tried using that rom that's called paulpizz or something like that. I used some other rom to. The paulpizz one always failed to install even after downloading it a third time. The other one i can't remember the name but it installed but wouldn't start at all. It would just go black and bootloop and goes into stock recovery for some reason. I came across the nf5 module when i found that paulpizz rom on the goo server they hosted it on. So i got the module and i figured if i were to flash the module over the i535 rom that it would fix the wifi an data problem but never got an answer because it always failed to start up properly and would just bootloop into stock recovery. Ugh Verizon is making things so difficult with modding lol. As of now I'm just using xposed to get at least some theming in and tweaks. I couldn't get any deodex program to work. Whenever i used the deodex files and pushed them to the system of apps and framework, it would restart and just stick on the Verizon logo. So i had to flash the firmware to fix the problem.

When i was on 4.3 with this phone safestrap worked and i got the wifi and data sim error. Now that i got it replaced I'm running the kernel of July 22 2014. Everyone was saying I'm out of luck but i came across kingroot and got the most recent version and it worked. I have root. Installed safestrap for 4.4 and it runs fine but can't get any custom roms to boot. I only managed to find one 4.4 touchwiz rom unfortunately

OpenSourcererSweg said:
Root has been obtained @ShapesBlue
Nobody has created a ROM for i535PP users yet(the i535 roms run but no wifi/data). And you're correct about having to use safestrap to flash it.If you're comfortable with a bash terminal you can try using one of the various tools found around here to modify the stock rom. If you're not then I'll see what I can do this weekend and try to get something for us i535pp users (after a day or so of testing)
Click to expand...
Click to collapse
OpenSourcererSweg said:
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.
Click to expand...
Click to collapse
Can you tell me what rom you have successfully flashed with safestrap? I would like to test something

bjf189 said:
Can you tell me what rom you have successfully flashed with safestrap? I would like to test something
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...iterom-v1-0-i535vrudne1-t2805797/post53919312
If you're going to try flashing an i535 rom and then the i535pp modules let me know how that goes, can't test as I won't be able to do anything till the weekend. If that's the case then there's no need for roms for the pre paid version. Cyanogenmod was also bootable but very buggy.

OpenSourcererSweg said:
http://forum.xda-developers.com/gal...iterom-v1-0-i535vrudne1-t2805797/post53919312
If you're going to try flashing an i535 rom and then the i535pp modules let me know how that goes, can't test as I won't be able to do anything till the weekend. If that's the case then there's no need for roms for the pre paid version. Cyanogenmod was also bootable but very buggy.
Click to expand...
Click to collapse
I'll let you know how it goes and thank you. How is it that you were able to boot CM? From my understanding being that the bootloader is locked and has Knox for extra security to make the unlocking like impossible. But a genius came up with safestrap so we are able to use some custom roms but the down side is that it has to be the same Android OS and has to be a touchwiz based rom. So how are you getting lucky with all this? I love CM and I'd pick CM over any custom rom any day but i gave up an lost hope of ever getting CM because of the locked bootloader

bjf189 said:
I'll let you know how it goes and thank you. How is it that you were able to boot CM? From my understanding being that the bootloader is locked and has Knox for extra security to make the unlocking like impossible. But a genius came up with safestrap so we are able to use some custom roms but the down side is that it has to be the same Android OS and has to be a touchwiz based rom. So how are you getting lucky with all this? I love CM and I'd pick CM over any custom rom any day but i gave up an lost hope of ever getting CM because of the locked bootloader
Click to expand...
Click to collapse
Safestrap 3.75 had support for AOSP roms (wifi/data didn't work for them either) and 4.0 dropped support for that (there is currently no point). Read the thread for more info http://forum.xda-developers.com/showthread.php?t=2797314

Ok i wasn't using safestrap 4.0. I had 3.75 B05 which i thought was the latest version they had. I'm updated to 4.0 now and about to test the modules on the superlite rom

Update: i have tried the super lite rom using safestrap. The boot animation won't work during start up. When it gets to the welcome screen it freezes. It still does it even without applying the nf5 module. It freezes and will keep popping up that system isn't responding. System just keeps freezing and prompting me to wait or force close. So not sure why my s3 has a problem running it but yours don't

bjf189 said:
Update: i have tried the super lite rom using safestrap. The boot animation won't work during start up. When it gets to the welcome screen it freezes. It still does it even without applying the nf5 module. It freezes and will keep popping up that system isn't responding. System just keeps freezing and prompting me to wait or force close. So not sure why my s3 has a problem running it but yours don't
Click to expand...
Click to collapse
Did you wipe cache/data after installing? Other than that I can't think of anything that would cause that

OpenSourcererSweg said:
Did you wipe cache/data after installing? Other than that I can't think of anything that would cause that
Click to expand...
Click to collapse
Well no. The instructions just said to do a full wipe off everything then install and reboot so extra what i did. What version you running of the rom?

bjf189 said:
Well no. The instructions just said to do a full wipe off everything then install and reboot so extra what i did. What version you running of the rom?
Click to expand...
Click to collapse
I'm running the stock prepaid rom, not superlightrom, sorry if there's any confusion there.
When I tried out superlightrom (quite some time ago) it appeared to work fine (excluding wifi/data and nagging about no SIM card being inserted, nothing like what you're describing) and I went back to stock.

Oh ok. Well it seems that the prepaid version or the s3 in general is dead. That's unfortunate