Database Info

Rooting Micromax Funbook easiest way!!!!

This is the method to root Micromax Funbook & install CWM recovery.
1) Download the attachment funbook.rar
2) Extract it , it contains CWM recovery & CWM-SuperSU.zip two .rar files
3) Extract CWM recovery to desktop & connect your funbook via usb
4) If the device is not detected then install the ADB driver in the attachment
5) open CWM recovery run Recovery-Install.bat
it has 3 option select 1 to install CWM recovery
select 2 to reboot into recovery
select 3 to quit.
6) then move CWM-SuperSU.zip to internal sd of funbook
7) boot into CWM recovery by pressing menu button & power button simultaneously.
8) select install zip from internal sd card & select the CWM-SuperSU.zip & press power button, select yes to continue.
now you are Rooted
Before installing any custom rom perform a NANDROID backup.
This method is successfully tested by me however use this at your own risk!

How exactly is CWM recovery supposed to be installed on the tablet?

just run the Recovery-Install.bat with micromax funbook connected & ADB driver installed on your computer, it will autometically install CWM recovery on your funbook.

Funbook is Pre-Rooted. No Need to root it again.

Thank You
Thank You..
I Love you...

not working
Its say system remount failed, could not copy recovery image
Please help me I want to install custom rom ,
I am using micromax funbook

Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.

pls help
when i run recovery-install.bat
permission denied can somone pls help

I am Getting The following error
remount failed: Operation not permitted
failed to copy 'recovery.img' to '/data//recovery.img': Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied

Problem with installation of CWM on Funbook
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.

help me
dushmanta.bgh said:
Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.
Click to expand...
Click to collapse
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it

JetMOD 5.0.1 stuck on Funbook logo, u may tru FunSeries or CyanBook for micromax funbook.Hit Thanks button

For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
INSTALLING CUSTOM RECOVERY
1. Download CWM Recovery 5 ICS.zip
2. Extract it.
These are the requirements fo Flash CWM...
- tablet must be running Android ICS version (4.0.x)
- tablet must have Superuser installed with SU binary loaded
- tablet must have Debugging enabled (ADB drivers included)
Your Funbook is Pre-Rooted, so we'll just proceed with installing Superuser App from Market
3. Go to Play Store and download Superuser.
4. Go to Superuser App > Settings > Su Binary > Install the Binary
5. Reboot.
Now we'll enable USB Debugging
6. Go to Settings > Developer Options > Turn On USB Debugging.
Now we'll increase the screen timeout to prevent screen from getting turned off in the middle of these procedures
7. Go to Settings > Display > Select Never at Sleep.
8. So now connect the USB Cable to your PC and Funbook and you should see USB Debugging Connected notification.
At this point, if this is your first time, you may see Windows trying to find Drivers which will fail ofcourse. Go to Device Management [Press Windows Key + R > Type devmgmt.msc] > Right Click on Unknown Devices > Update Driver Software > Browse My Computer for Driver Software > Both 64bit [Drivers-AllwinnerA10-64bits] and 32bit [Drivers-AllwinnerA10-32bits] Drivers are provided there within a folder named ADB_Drivers under the Recovery Package, so just browse them according to your OS Specification. A screen may appear up saying "The Publisher of this Driver could not be verified", just ignore that and "Continue Anyway".
9. DO NOT TURN ON USB STORAGE. LEAVE IT AS IT IS.
Time to install CWM. There are two methods. One is easy, by running a script and another is using ADB by typing commands. You'll get an _Instructions.txt there which lists both the methods in case you want to try out the 2nd method. Here I'll only cover the easy one i.e. using Script.
10. Run recovery-install.bat [Windows] / recovery-install.sh [Linux] and press any key and just wait and watch the show
11. Within few mins recovery will be installed.
To reboot in Recovery Mode -> Press Options Key and by keeping it pressed, Press Power Key. Release Power Key and then Release Options Key.
12. Reboot.
Code:
=======================================================
| How to control ClockworkMod Recovery 5 |
| |
| VOL+: up |
| VOL-: down |
| POWER: select |
| BACK: back |
=======================================================
Credit goes to tkin
HAVING PROBLEM WHILE INSTALLING CWM?? GETTING PERMISSION DENIED ERROR??
Ok, for those who cannot install CWM from the normal steps(most probably new funbook users having Base 1.2 and ICS 4.0.3) follow these steps.
1. Install Superuser from playstore, update binary, you'll notice it will fail one part(red text), re do the update 2,3 times staright away until all the text become green, no need to reboot phone, but you might want to.
2. Install Android terminal from playstore, in terminal put su and press enter, if you get a warning allow it, if # comes you have root access. If not, re do step one. Don't continue till you get this step correct.
3. Download ES File manager from playstore, go to settings, allow all root access related options and also tick go upto root option.
4. Now start ES file manager, go to root, long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steaps for nandg file.
5. Allow USB debugging from dev options, connect the cable, install drvers.
6. Run the ICS recovery script, wait for it to finish, if it fails then you need to check and set permission again, if all goes well you have successfully installed CWM.
Warning: When setting permissions in ES File Manager make sure the USB cable is not attached, if so it might cause a hard crash and brick the device.
I had used this method to flash CWM on mine and on my friends device, both Base 1.2 and ICS 4.0.3(made in may 2012, the rom build no is: 97F1-D1-H2-H01-MMX.20120512) hence I think funbooks made after may 2012 must use this method, otherwise the script will fails due to permission denial.
Click to expand...
Click to collapse
Worked like a charm for me after setting permissions... Good luck..

Guys try the new Rom
http://forum.xda-developers.com/showthread.php?p=28353648
Sent from my HTC Desire S using xda app-developers app

sudhirrawal20 said:
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it
Click to expand...
Click to collapse
If you want Custom to Jetmod you have to flash yuor ROM into ployer Momo9 Based ROM...
Please use search tool forum before asking question like this.

sukhjit321 said:
For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
Worked like a charm for me after setting permissions... Good luck..
Click to expand...
Click to collapse
dude 'm suck wit a problem!!
I can't change permission of nandg. file and the file name on my funbook is '2012nandg'
I time root browser es explorer
help!! and es explorer gives me on root access to change permission

how to root?
Micromax Funbook ICS 4.0.3 how to root it?
guys i had lots of troubles in installing custom recovery so i tried sparky root but that crappy app can only unroot.
after that i cant update su binary.so used superoneclick it can only root 2.2 and 2.3 now am stuck with rooting.
please guide me to root funbook

neo.abyss said:
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.
Click to expand...
Click to collapse
Try this:_
Right click on 'recovery-install.bat' and run as administrator.....

Unable to install recovey on funbook
Is there anybody to help, i am getting the same error while trying to install recovery on my funbook....
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied to install a custom rom...

this is the easiest way to root
1)download this super user by chainsDD on you funbook
2)open it and update you binary from it and you r done
installing cwm is easy use this guide

[dev] Are you able to root ZTE MD Smart? I will donate to you!

Hello to all developers! I have this phone (ZTE MD Smart) from two weeks and I think there is no way to get root privileges. I tried all the ways that I found online, but I did not succeed, the device is equipped with Android 2.3.5 compiled on 23/05/2012. If someone manages to gain the privileges of this phone I promise him a donation of €10. I can share the use of my phone and my PC by TeamViewer.
General info:
S.O.: Android OS 2.3.5 Gingerbread
CPU: mtk6573 800MHz
Ram: 256MB
Rom: 512MB
1) There isn't a key combination to start the phone in fastboot mode.
2) I think we can update the phone by the application "Flash Tool", but unfortunately ZTE has not released the original firmware and not release it ever.
3) Usefull app that scans your device for root vulnerabilities: X-Ray
Root method that I tried and do not work:
1) rageagainstthecage script
2) psneuter script
3) zergRush script
4) SuperOneClickv2.3.3-ShortFuse
5) UnlockRoot 2.4.2
6) z4root
7) GingerBreak
8) DooMLoRD v4
9) TPSparkyRoot
10) update.zip (unsigned error)
11) sync_agent backdoor
12) levitator script ([-] dev_attr_ro symbol not found, aborting! <--ERROR)
Donations for the one who finds a way to get the root:
- pajerm 10€
- quandrav 10€

have you tried the ZTE backdoor?
http://pastebin.com/wamYsqTV
might be worth a shot

unfortunately does not exist "sync_agent" in my phone, anyway thanks for the reply!

rooted by me!

[UPDATED Feb14][How-To] Root AML8726-MX Generic Devices

This is a (very) small how-to regarding Root on Generic (unbranded, mostly called "MID") Android Tablets with aml8726-mx platform.
This file was made originally for Ainol Novo 7 Crystal tablet, but it works (or should work) on all devices based on the following platform:
AML8726-MX System-On-Chip, AMLogic Meson6 gXX costumer platform
Cortex A9 Dual-Core CPU @ 1.5Ghz
1Gb Ram
Dual-Core Mali400 GPU
Android ICS 4.0.4 or JB 4.1.1
Other exploits have been tried, like Bin4ary's method, Doomlord's method, SRS Root, One Click Root, but all of them can't seem to work (for now) for these devices when Android ICS 4.0.4 or Jelly Bean 4.1.1 is present. So, if you own one of these devices, use this file to gain Root access.
1 - Put the zip file on the root of your SD card
2 - Reboot to recovery (with the device off, press the Vol - and Power button together until it enters recovery)
3 - Select (using Vol keys) "apply update from EXT"
4 - Select the file and run it pressing the Power button
5 - Reboot your device
You should see before Android finishes loading a small notification saying "Android is updating", and after it finishes loading, if you go to the App drawer, you should see SuperSU installed.
UPDATE:
It seems that some of these devices that come with newer versions of Android have EXT4 FS instead of UBIFS.
XDA Member Lannig has managed to edit the META-INF file of the "Crystal-Root.zip", re-compress it and re-sign it.
With his permission, and by suggestion of XDA Member AbliB, i'm posting Lannig's root file here in the OP, so that users with these AmLogic devices with EXT4 File System can have root.
Credits for the original root file (Crystal-Root.zip) go to Soulflier @ Slatedroid.com
Credits for the alternative root file go to Lannig @ XDA

JBolho said:
This is a (very) small how-to regarding Root on Generic (unbranded, mostly called "MID") Android Tablets with aml8726-mx platform.
This file was made originally for Ainol Novo 7 Crystal tablet, but it works (or should work) on all devices based on the following platform:
AML8726-MX System-On-Chip, AMLogic Meson6 gXX costumer platform
Cortex A9 Dual-Core CPU @ 1.5Ghz
1Gb Ram
Dual-Core Mali400 GPU
Android ICS 4.0.4 or JB 4.1.1
Other exploits have been tried, like Bin4ary's method, Doomlord's method, SRS Root, One Click Root, but all of them can't seem to work (for now) for these devices when Android ICS 4.0.4 or Jelly Bean 4.1.1 is present. So, if you own one of these devices, use this file to gain Root access.
1 - Put the zip file on the root of your SD card
2 - Reboot to recovery (with the device off, press the Vol - and Power button together until it enters recovery)
3 - Select (using Vol keys) "apply update from EXT"
4 - Select the file and run it pressing the Power button
5 - Reboot your device
You should see before Android finishes loading a small notification saying "Android is updating", and after it finishes loading, if you go to the App drawer, you should see SuperSU installed.
Full credits for the file go to Soulflier @ Slatedroid.com
Click to expand...
Click to collapse
Thanks !!!!
This works for my Viewsonic VB100a pro using 4.1.1

JBolho said:
This is a (very) small how-to regarding Root on Generic (unbranded, mostly called "MID") Android Tablets with aml8726-mx platform.
This file was made originally for Ainol Novo 7 Crystal tablet, but it works (or should work) on all devices based on the following platform:
AML8726-MX System-On-Chip, AMLogic Meson6 gXX costumer platform
Cortex A9 Dual-Core CPU @ 1.5Ghz
1Gb Ram
Dual-Core Mali400 GPU
Android ICS 4.0.4 or JB 4.1.1
Other exploits have been tried, like Bin4ary's method, Doomlord's method, SRS Root, One Click Root, but all of them can't seem to work (for now) for these devices when Android ICS 4.0.4 or Jelly Bean 4.1.1 is present. So, if you own one of these devices, use this file to gain Root access.
1 - Put the zip file on the root of your SD card
2 - Reboot to recovery (with the device off, press the Vol - and Power button together until it enters recovery)
3 - Select (using Vol keys) "apply update from EXT"
4 - Select the file and run it pressing the Power button
5 - Reboot your device
You should see before Android finishes loading a small notification saying "Android is updating", and after it finishes loading, if you go to the App drawer, you should see SuperSU installed.
Full credits for the file go to Soulflier @ Slatedroid.com
Click to expand...
Click to collapse
-------------------------------------
Need your help, i have use your root and it works find, but not sure what i did, after it reboot, the system hang and the screen gets lock up. I have use the factory default but still not working. Not sure if you have any way that can help me to see what happen.
the volume button still works. i.e. press up and down i can still hear the tone.
I must emphasize, i am not blaming your root program, as it was working fine
I am only seeking your help as i believe you may have some clue on how to troubleshoot. Thanks in advance.

Thanks.,this worked with my coby kyros mid1060.,please tell me how to make system dump?.,then CWM?.,

thye666 said:
-------------------------------------
Need your help, i have use your root and it works find, but not sure what i did, after it reboot, the system hang and the screen gets lock up. I have use the factory default but still not working. Not sure if you have any way that can help me to see what happen.
the volume button still works. i.e. press up and down i can still hear the tone.
I must emphasize, i am not blaming your root program, as it was working fine
I am only seeking your help as i believe you may have some clue on how to troubleshoot. Thanks in advance.
Click to expand...
Click to collapse
What happened exactly? Did the device boot properly after root? Or did this happen afterwards? If it happened on the first boot after root, than maybe this method is not suitable for your device, i suggest making a full factory reset (wipe cache and media partitions if the recovery has that option) and then do a factory reset in the recovery.

glennski_0104 said:
Thanks.,this worked with my coby kyros mid1060.,please tell me how to make system dump?.,then CWM?.,
Click to expand...
Click to collapse
I'm trying to find out that myself, since my tablet is a generic unbranded device. For now i only have root installed and nothing else, only the standard recovery. Since your device is not as generic, try searching Slatedroid.com for enything related to it, they have a ton of topics on most low-cost tablets on the market, including Ainol's, Coby's, Zenithink's, etc.

JBolho said:
What happened exactly? Did the device boot properly after root? Or did this happen afterwards? If it happened on the first boot after root, than maybe this method is not suitable for your device, i suggest making a full factory reset (wipe cache and media partitions if the recovery has that option) and then do a factory reset in the recovery.
Click to expand...
Click to collapse
It did root properly, the root works very well. its my own fault that after root, i download lots of apps and change the "boot animation" and also run fix permission using Clockwork and all hell broke loose after reboot. It was "bricked" as it even factory default also cannot work.
- Luckly i search the web for 3 days and finally able to find the original ROM + the tools from a Chinese website and able to use PC -USB - Tablet to reload everything using ImageBurnTool.exe.
Now my tablet is back to normal and with this ImageBurnTool, i have make it "brick" few time and still able to restore to factory default.
Actually i was thinking of sharing the ROM and the website here, but not sure how to do it.
It seems there is no Forum on Viewsonic VB100a pro, i wish to setup one to help other and share my experience.
:victory:

NEXT8D12F
I have tried this on my Nextbook NEXT8D12F which has AMLogic 8726-MX 1.5 Ghz and the ARM Mali TM-400 GPU but didn't have any luck.
I put the zip on the root of a formatted microSD and put it in the tablet whiles its off. Boot into recovery mode then it says:
E:Bad bootloader arguments
"(null)"
E:unknown volume for path [/udisk/factory_update_param.aml]
E:Can't mount /udisk/factory_update_param.aml
So I select the option 'apply update from sdcard' and select the Crystal_Root.zip and it starts doing something then says:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failes
Installation aborted.
Anyone know what's going on?
Cheers.

tenspeedtodd said:
I have tried this on my Nextbook NEXT8D12F which has AMLogic 8726-MX 1.5 Ghz and the ARM Mali TM-400 GPU but didn't have any luck.
I put the zip on the root of a formatted microSD and put it in the tablet whiles its off. Boot into recovery mode then it says:
E:Bad bootloader arguments
"(null)"
E:unknown volume for path [/udisk/factory_update_param.aml]
E:Can't mount /udisk/factory_update_param.aml
So I select the option 'apply update from sdcard' and select the Crystal_Root.zip and it starts doing something then says:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failes
Installation aborted.
Anyone know what's going on?
Cheers.
Click to expand...
Click to collapse
Have you tried to re-download the file? What Android version do you have on your device? This is designed for ICS 4.0.4 or JB 4.1.1 and possibly 4.1.2. The error you're getting suggests that the file is corrupted but there is a chance of your device manufacturer has it's own Android customized version and some paths may be different from the generic Google version. (This happens with Huawei for example)

ROM Android 4.1
thye666 said:
It did root properly, the root works very well. its my own fault that after root, i download lots of apps and change the "boot animation" and also run fix permission using Clockwork and all hell broke loose after reboot. It was "bricked" as it even factory default also cannot work.
- Luckly i search the web for 3 days and finally able to find the original ROM + the tools from a Chinese website and able to use PC -USB - Tablet to reload everything using ImageBurnTool.exe.
Now my tablet is back to normal and with this ImageBurnTool, i have make it "brick" few time and still able to restore to factory default.
Actually i was thinking of sharing the ROM and the website here, but not sure how to do it.
It seems there is no Forum on Viewsonic VB100a pro, i wish to setup one to help other and share my experience.
:victory:
Click to expand...
Click to collapse
Could you pass me the link to download the rom of android 4.1 for tablet vb100a pro?
thank you very much

JBolho said:
Have you tried to re-download the file? What Android version do you have on your device? This is designed for ICS 4.0.4 or JB 4.1.1 and possibly 4.1.2. The error you're getting suggests that the file is corrupted but there is a chance of your device manufacturer has it's own Android customized version and some paths may be different from the generic Google version. (This happens with Huawei for example)
Click to expand...
Click to collapse
I'll give it a re-download and try again later.
Yeah mine is 4.0.4 ICS.
Edit:
I re-downloaded and put the zip on a different microSD but same things agian.

can u pls tell me how to put Nextbook Next8d12F into recovery mode?
hi,
can u pls tell me how to put Nextbook Next8d12F into recovery mode?
i have tried pressing Vol - button and power. it didnt work.
can u pls guide me?
tenspeedtodd said:
I have tried this on my Nextbook NEXT8D12F which has AMLogic 8726-MX 1.5 Ghz and the ARM Mali TM-400 GPU but didn't have any luck.
I put the zip on the root of a formatted microSD and put it in the tablet whiles its off. Boot into recovery mode then it says:
E:Bad bootloader arguments
"(null)"
E:unknown volume for path [/udisk/factory_update_param.aml]
E:Can't mount /udisk/factory_update_param.aml
So I select the option 'apply update from sdcard' and select the Crystal_Root.zip and it starts doing something then says:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failes
Installation aborted.
Anyone know what's going on?
Cheers.
Click to expand...
Click to collapse

thye666 said:
It did root properly, the root works very well. its my own fault that after root, i download lots of apps and change the "boot animation" and also run fix permission using Clockwork and all hell broke loose after reboot. It was "bricked" as it even factory default also cannot work.
- Luckly i search the web for 3 days and finally able to find the original ROM + the tools from a Chinese website and able to use PC -USB - Tablet to reload everything using ImageBurnTool.exe.
Now my tablet is back to normal and with this ImageBurnTool, i have make it "brick" few time and still able to restore to factory default.
Actually i was thinking of sharing the ROM and the website here, but not sure how to do it.
It seems there is no Forum on Viewsonic VB100a pro, i wish to setup one to help other and share my experience.
:victory:
Click to expand...
Click to collapse
i also need it Could you pass me the link to download the rom of android 4.1 for tablet vb100a pro?
thank you very much

For those who need the VB100a pro rom, go to below cloud to download. Note this doesn't belong to me, i just stumble upon it from a Chinese Forum
http://yunpan.360.cn
[email protected]
viewsonic
-- once login, double click on the third folder[安卓-平板-固件], you will see [VB100a pro] folder, there are 4.0 and 4.1 i test 4.1 it is working. 4.0 does not working on my vb100a pro

i find it but~线刷andTF any different？

线刷 == USB to tablet. it is the only method when you have brick(no recovery menu) your Tablet
TF == put to sim card and use recovery menu

CWM
JBolho said:
This is a (very) small how-to regarding Root on Generic (unbranded, mostly called "MID") Android Tablets with aml8726-mx platform.
This file was made originally for Ainol Novo 7 Crystal tablet, but it works (or should work) on all devices based on the following platform:
AML8726-MX System-On-Chip, AMLogic Meson6 gXX costumer platform
Cortex A9 Dual-Core CPU @ 1.5Ghz
1Gb Ram
Dual-Core Mali400 GPU
Android ICS 4.0.4 or JB 4.1.1
Other exploits have been tried, like Bin4ary's method, Doomlord's method, SRS Root, One Click Root, but all of them can't seem to work (for now) for these devices when Android ICS 4.0.4 or Jelly Bean 4.1.1 is present. So, if you own one of these devices, use this file to gain Root access.
1 - Put the zip file on the root of your SD card
2 - Reboot to recovery (with the device off, press the Vol - and Power button together until it enters recovery)
3 - Select (using Vol keys) "apply update from EXT"
4 - Select the file and run it pressing the Power button
5 - Reboot your device
You should see before Android finishes loading a small notification saying "Android is updating", and after it finishes loading, if you go to the App drawer, you should see SuperSU installed.
Full credits for the file go to Soulflier @ Slatedroid.com
Click to expand...
Click to collapse
-hello do you have CWM for aml8726-mx?

Dude....you rock. I have been trying for days to root my dad's Zeki 7" 4.1.1 Jelly Bean tablet. This worked without any problems. Just flashed the zip and waited for Android to update and....rooted. Now, I got this bad boy looking like a Nexus 7. And with Google Play!!!
Thanks for your contribution....I will give donation once I have enough money because this is just plain awesome!!!! :good:

thye666 said:
For those who need the VB100a pro rom, go to below cloud to download. Note this doesn't belong to me, i just stumble upon it from a Chinese Forum
http://yunpan.360.cn
[email protected]
viewsonic
-- once login, double click on the third folder[安卓-平板-固件], you will see [VB100a pro] folder, there are 4.0 and 4.1 i test 4.1 it is working. 4.0 does not working on my vb100a pro
Click to expand...
Click to collapse
hi
i cant seem to get to the cloud
please help
thanks

iluvatrix said:
hi
i cant seem to get to the cloud
please help
thanks
Click to expand...
Click to collapse
Address(copy and paste in IE/firefox/Crome): http://yunpan.360.cn
ID: [email protected]
password: viewsonic

[Q] How to unroot t528w

Hi
I am using HTC One Su (t528w) handset bought from China.
I rooted the mobile in order to install google services. Now I want to unroot . I tried to unroot the same way I rooted it . But not able to do so . Below is the log below
HTML:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (13.10.2012) v15 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: x
Really (y/n) ?y
3278 KB/s (1085140 bytes in 0.323s)
rm failed for /system/bin/su, No such file or directory
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
I rebooted and still not able to unroot. Please help:crying:

Ohk, I am uable to unroot it .. But I am facing another problem now. My handset showing notificatiuon of system update to 4.1.1 from present 4.0.4 . when ever I click on install updates. it reeboted and log into bootloader menu . How can I install the updates ?

yogusmilu said:
Ohk, I am uable to unroot it .. But I am facing another problem now. My handset showing notificatiuon of system update to 4.1.1 from present 4.0.4 . when ever I click on install updates. it reeboted and log into bootloader menu . How can I install the updates ?
Click to expand...
Click to collapse
Stock recovery? Then do ota again
Verstuurd van mijn One S met Tapatalk

[root][sm-g7202/720] samsung galaxy grand max

Hey guys
Im new in XDA.
First on net....
ROOTING GUIDE FOR GRAND MAX
So this is my guide to ROOT GALAXY GRAND MAX
this is only tutorial.
im nt responsibile for any brick and all
.
ROOT GALAXY GRAND MAX TOTALLY SAFE AND SECURE WAY
Click to expand...
Click to collapse
Use follwing steps
Step 1: On your MAX Open Settings > Security > Device Administration > Unknown Source (tick to enable it).
Step 2: Download and install KingRoot APK on your Android Device.
Step 3: Once Installation is completed, you will be able to see the following icon in the Launcher Menu:
Step 4: Tap on the KingRoot Icon to Open it. Once KingRoot Application is launched you will be able to see the following screen:
Step 5: Now, Tap on the Start Root Button to begin the root process.
Step 6: Now, KingRoot will start the rooting process.
Step 7: Within a minute or two you will be able to see the Big Green Tick, which signifies that your device is rooted successfully.
Step 8: Restart your Device manually.
Step 9: Now, as your MAX is Rooted Successfully you might want to verify that your device is rooted or not. For that, Download and install Root Checker Application from the Play Store and verify the root status manually..... :good:
.
.
.
Keep in Mind:
[*] Powerful Tool: KingRoot is a very powerful tool, that allows you to root Android Devices from android 2.3 to 5.1 without any issues.
[*] No data loss process: Your Android Phone Data like contacts, pictures, videos, music and etc will be not affected with this method.
[*] Warranty Void: Your Android Device Warranty may be Void after following the above tutorial.
[*] Credits: #KingRoot Application is created by Kingroot studio. So Full Credits goes to them for the Application.
[*] If you have tried the above tool to root your Android device then please let us know if it works or not along with your MAX Model number through the comment box below.
Click to expand...
Click to collapse
.
Please if it works for you guys HiT THANKS BUTTON
.
.
SUCCESSFULLY ROOTED YOUR GRAND MAX

cwm recovery for grand max
Please tell how to install cwm recovery in galaxy grand max.
I haven't found any process for this phone.

Worked in 7202 thnxx but reply to convert system status custom to official
Worked in 7202 thnxx but reply to conver system status custom to official so that warrenty becomes original:good:

U have to clear the binary count for this..
For this you need a app called "triangle away".
Search google for further information
I've not personally done this.... mine is also custom.

Thanks for this useful post.

Not working

vooks said:
Not working
Click to expand...
Click to collapse
explain Here what problem you are facing.
may b its not working for you try agin

if anyone wants to convert kinguser to supersu than Hit thanks button
and mention there comment below
???✌?

Let me guess..OS is Kit Kat..NOT Lollipop.?
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)

Aamir4813 said:
if anyone wants to convert kinguser to supersu than Hit thanks button
and mention there comment below
???✌?
Click to expand...
Click to collapse
Plz say how to convert super su
Android id changer is not working on tht root

I'm planning to buy this mobile. But little bit confused
Sure this will become rooted na?!?

can u tell how to convert kinguser to supersu plzzzz

yes it can be rooted...
don't worry about it..
coz im also using this phone i have been done rooted this device....??

yes u need to download the following file.....
Download and install Terminal emulator app
Download zip file
Send the extracted folder "mrw" to the internal storage of your device and make sure that this folder contains 4 files
Open Terminal emulator and type : su
Allow root permission
Type : sh/sdcard/mrw/root.sh
then just let this happen it ll auto update evrythng
NOTE: it might display some error, at the end it will launch supersu or open supersu manually.
Update su binary normal, then reboot.

TWRP recovery and stock recovery needed
Please provide stock recovery and TWRP recovery for SM-G7202. Email me at [email protected]

kernel is not seandriod enforcing
okay rooted and it says
kernel is not seandriod enforcing :silly:
on startup
any solution for this?

Sir my samsung grand max is not rooting the app shows that unavailable and after it shows 247ppls requested so not enough request it says

Please,build a custom recovery for galaxy grand max..without custom recovery there is nothing to do so much in grand max even after rooting

it's not working
In the middle of rooting it says root strategy unavailable.please help me