Apps Modified with Apktool v2 Beta 7 are not Working in ART....
Is there any Solution for this ?
laura almeida said:
Apps Modified with Apktool v2 Beta 7 are not Working in ART....
Is there any Solution for this ?
Click to expand...
Click to collapse
Did they work before using APKTool? Are they mention in this list as "not working"?
Primokorn said:
Did they work before using APKTool? Are they mention in this list as "not working"?
Click to expand...
Click to collapse
Yes they were working perfectly fine....
laura almeida said:
Yes they were working perfectly fine....
Click to expand...
Click to collapse
Did you sign the apk files? Do you manage to install them on your device?
Primokorn said:
Did you sign the apk files? Do you manage to install them on your device?
Click to expand...
Click to collapse
Yes i Signed these Apps.
Yes i was managed to Install them
Yes It is still working Dalvik
When i switched to ART, it says Unfortunately it is not working
find solution now?
i got the same problem
laura almeida said:
Yes i Signed these Apps.
Yes i was managed to Install them
Yes It is still working Dalvik
When i switched to ART, it says Unfortunately it is not working
Click to expand...
Click to collapse
what kind of modifications?
Sent from my Nexus 5 using XDA Premium 4 mobile app
thenobol said:
what kind of modifications?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mostly xml Modifications
ART itself is still very much experimental
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
only messed with apks once, but I noticed not all the files in the apk I was messing with were compressed to the same level..
I had to add one separately with 0 compression to make the apk the similar size as the original. for some reason I was being anal about it at the time... just a thought
meangreenie said:
only messed with apks once, but I noticed not all the files in the apk I was messing with were compressed to the same level..
I had to add one separately with 0 compression to make the apk the similar size as the original. for some reason I was being anal about it at the time... just a thought
Click to expand...
Click to collapse
I always compare's the compression level with the original apk...
Almost all time the size of modified apk and original apk matches (maybe with a difference less than 1 mb)
rootSU said:
ART itself is still very much experimental
Click to expand...
Click to collapse
Are you saying that i should not play around with ART ?
Should i just wait for a more stable release of ART ?
laura almeida said:
Are you saying that i should not play around with ART ?
Should i just wait for a more stable release of ART ?
Click to expand...
Click to collapse
That's up to you. Just bear in mind that as its experimental, not everything works so don't waste too much time trying to get something working that may simply be down to a problem with ART
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
laura almeida said:
Mostly xml Modifications
Click to expand...
Click to collapse
ok, art depends on precompiling code emlements, which means, eg. if you edit the layout files, it can be possible that the precompiled data leads to the force closes - especially dynamically created views, can be a killing options :/
thenobol said:
if you edit the layout files, it can be possible that the precompiled data leads to the force closes
Click to expand...
Click to collapse
Where is this Precompiled data located in ?
I tried wiping data,cache,dalvik-cache Still the problem exist..
Does this issue somehow related with classes.dex ?
rootSU said:
That's up to you. Just bear in mind that as its experimental, not everything works so don't waste too much time trying to get something working that may simply be down to a problem with ART
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Click to expand...
Click to collapse
hum...
I should better stick with dalvik.
laura almeida said:
hum...
I should better stick with dalvik.
Click to expand...
Click to collapse
There's no reason to switch, since now you can get the same speed with this. I flashed the mods on my N5 and N7 and have noticed a considerable increase in speed on both devices.
Sent from my Nexus 5
PhilipTD said:
There's no reason to switch, since now you can get the same speed with this
Click to expand...
Click to collapse
Thank you so Much
I will surely try
laura almeida said:
Where is this Precompiled data located in ?
I tried wiping data,cache,dalvik-cache Still the problem exist..
Does this issue somehow related with classes.dex ?
Click to expand...
Click to collapse
dalvik and art are two independent runtimes, both implemented in android since 4.4.0. the dalvik machine uses .dex files, in a small kind of "precompiled". wiping the dalvik cache only deletes dalvik related files, like the .dex files.
for art, sorry i dont know where they are located or how they are made :/
maybe try to install the modified app in dalvik, and then switch to art, so the data of the app i new compiled.
can you post a logcat?
take a look here, it seems similar problem...
maybe invalid package error?
https://code.google.com/p/android/issues/detail?id=61916
http://forum.xda-developers.com/showthread.php?t=2027663
you can switch to dalvik, delete the apps data in /data/data ..., install the modded apk and switch to art again
Related
ALL credit to Paul from modaco:
original link
http://android.modaco.com/content/h...m/334130/htc-saga-desire-s-test-rom-from-ruu/
Paul said:
Points to note:
This is the full ROM with no changes EXCEPT to remove identifying watermarks (at the request of my source)
It's Gingerbread 2.3.2
The boot image is included
This is obviously for developer use.
PS If you use this in your ROM, please provide credit and link to this post.
Click to expand...
Click to collapse
mirror dl link
http://baadnewz.lcdc.sk/NOT_TESTED/saga.1.01.boot.system.tar.gz
Again my only credit is to repost the info here and make a mirror
howdid said:
first ! thx for sharing it with us will test it today
Click to expand...
Click to collapse
will not work on a Classic Desire .. yet
ok so i tried to port that dump and tried to flash, it seems that there is not enough space in our nand again but im not sure. i looked in Qtadb the flash procces and saw that the files are being installed to the system directory, but than when flash finishes the files are deleted... can anyone help me with this?
omerkisoss:The /system partition of our Desire is 256000Kb. The /system of Saga ROM is more then 330Mb.
You don't do anything at this point!
The thread is obviously for developers who will make a flashable rom out of it.
Have you read all 5 posts in this thread, or just the first one and immediately jumped to posting?
Sent from my HTC Desire using Tapatalk
omerkisoss said:
So what should I do? Will data2ext by ownhere will help? I'm a bit confused..
Click to expand...
Click to collapse
No, beacuse it will move the data files to the ext, but the system will still be to big for the desire.
You need to move some of the system apps to the data partition, and symlink them to system partition.
thats an option, you can use the data2ext script in order to save space in the data partition.
Other options are to try to optimize the apk's in order to save space, or to just delete some of them untill just remeber to not pass the 256mb.
omerkisoss said:
So what should I do? Will data2ext by ownhere will help? I'm a bit confused..
Click to expand...
Click to collapse
You can delete not needed stuff like themes..adobe reader some language...and / or put some stuff to data and symlink back to system
with kind regards..Alex
idanfima said:
No, beacuse it will move the data files to the ext, but the system will still be to big for the desire.
You need to move some of the system apps to the data partition, and symlink them to system partition.
thats an option, you can use the data2ext script in order to save space in the data partition.
Click to expand...
Click to collapse
you was faster..lol
with kind regards..Alex
Ok, got it booting with the same issues as in my AceS port... so i belive when i fix those, both roms are gonna work ok
robocik said:
Ok, got it booting with the same issues as in my AceS port... so i belive when i fix those, both roms are gonna work ok
Click to expand...
Click to collapse
Obviously assuming that you're using A2SD?
EddyOS said:
Obviously assuming that you're using A2SD?
Click to expand...
Click to collapse
Yes having some prob. With init.d...
Sent From Nokia 1100...!!!
EddyOS said:
Obviously assuming that you're using A2SD?
Click to expand...
Click to collapse
nope, d2ext
robocik said:
nope, d2ext
Click to expand...
Click to collapse
What...u have working init.d folder...I have lots of busybox errors for that...lol
JeckyllHavok said:
I can mirror it in small parts for you, not that you are at 99% and connection drops
Click to expand...
Click to collapse
Ya sure bro. Plz divide in atleast 10 part...
Sent From Nokia 1100...!!!
hold your horses, there is a long way till we sort this out to work bugfree, data2ext/a2sd/data2sd can be changed under 2 mins, roms (this one the ace one) can be made to fit in nand without deleting important stuff.. so the problem is porting libs to desire , drivers which is hard since we DON"T have gingerbread drivers for desire
Here you go:
If it's easier for you via ftp, tell me and i will give you an account
cygate.org/desires/saga.1.01.boot.system.tar.part01.rar
cygate.org/desires/saga.1.01.boot.system.tar.part02.rar
cygate.org/desires/saga.1.01.boot.system.tar.part03.rar
cygate.org/desires/saga.1.01.boot.system.tar.part04.rar
cygate.org/desires/saga.1.01.boot.system.tar.part05.rar
cygate.org/desires/saga.1.01.boot.system.tar.part06.rar
cygate.org/desires/saga.1.01.boot.system.tar.part07.rar
cygate.org/desires/saga.1.01.boot.system.tar.part08.rar
cygate.org/desires/saga.1.01.boot.system.tar.part09.rar
cygate.org/desires/saga.1.01.boot.system.tar.part10.rar
cygate.org/desires/saga.1.01.boot.system.tar.part11.rar
cygate.org/desires/saga.1.01.boot.system.tar.part12.rar
JeckyllHavok said:
Here you go:
If it's easier for you via ftp, tell me and i will give you an account
cygate.org/desires/saga.1.01.boot.system.tar.part01.rar
cygate.org/desires/saga.1.01.boot.system.tar.part02.rar
cygate.org/desires/saga.1.01.boot.system.tar.part03.rar
cygate.org/desires/saga.1.01.boot.system.tar.part04.rar
cygate.org/desires/saga.1.01.boot.system.tar.part05.rar
cygate.org/desires/saga.1.01.boot.system.tar.part06.rar
cygate.org/desires/saga.1.01.boot.system.tar.part07.rar
cygate.org/desires/saga.1.01.boot.system.tar.part08.rar
cygate.org/desires/saga.1.01.boot.system.tar.part09.rar
cygate.org/desires/saga.1.01.boot.system.tar.part10.rar
cygate.org/desires/saga.1.01.boot.system.tar.part11.rar
cygate.org/desires/saga.1.01.boot.system.tar.part12.rar
Click to expand...
Click to collapse
thanks bro... also a big thanks for my neighbor net...hehehe
got booted also have data connection but this time no wifi...
some screen shots if u want...
coolexe said:
thanks bro... also for my neighbor net...hehehe
got booted also have data connection but this time no wifi...
some screen shots if u want...
Click to expand...
Click to collapse
nice man
what kernel are you using ? i use this vorkKernel-2.6.37.2-HAVS-CFS-SIO-SLQB-28-Feb-11.zip
robocik said:
nice man
what kernel are you using ? i use this vorkKernel-2.6.37.2-HAVS-CFS-SIO-SLQB-28-Feb-11.zip
Click to expand...
Click to collapse
i use.. couttstech-2.6.32.28_OC1190_CFS_VR_SLQB.. kernel... n this time no reboots...but its too slow also some gfx prob...
Thread cleaned up a bit.
As usual for this type of thread, please don't use it for general chit-chat and for asking for ETA's and flashable zips etc.
There are Developers here working on this, and they don't need the thread polluted.
Thanks.
Maybe you should try hboot with diffrent memory partitioning ?? (look @ alpharev site)
http://forum.xda-developers.com/showthread.php?t=2144652&highlight=nexus+5
Any idea if anything like this is possible/useful in our Nexus 5?
aavvaallooss said:
http://forum.xda-developers.com/showthread.php?t=2144652&highlight=nexus+5
Any idea if anything like this is possible/useful in our Nexus 5?
Click to expand...
Click to collapse
you can use a root file explorer(if you have root) to disable/turn off thermal throttle. the file is located in /sys/module/msm_thermal/parameters/enabled/ then change the Y to a N.
Also, kernels such as chaos or faux allow you to change the thresholds
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
simms22 said:
you can use a root file explorer(if you have root) to disable/turn off thermal throttle. the file is located in /sys/module/msm_thermal/parameters/enabled/ then change the Y to a N.
Click to expand...
Click to collapse
In parameters folder i don´t have enabled folder. I only have temp_threshold file (setting to 70, ºC I guess)
rootSU said:
Also, kernels such as chaos or faux allow you to change the thresholdst
Click to expand...
Click to collapse
I know, thank you.
I only want to known if any improvement of hardware manufacture was done between N4 and N5.
aavvaallooss said:
In parameters folder i don´t have enabled folder. I only have temp_threshold file (setting to 70, ºC I guess)
Click to expand...
Click to collapse
ah, then youre on the stock kernel, and dont have the files exposed.
simms22 said:
ah, then youre on the stock kernel, and dont have the files exposed.
Click to expand...
Click to collapse
Look at my signature, I´m on Franco´s (r30. Stock parameters)
aavvaallooss said:
Look at my signature
Click to expand...
Click to collapse
It's not visible to xda app / tapatalk users
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
aavvaallooss said:
I know, thank you.
I only want to known if any improvement of hardware manufacture was done between N4 and N5.
Click to expand...
Click to collapse
oh, yea, hardware wise there has been an improvement. the n5 doesnt throttle as much or as hard as the n4. and thats odd that franco didnt expose the files for thermal throttle, many other kernels do.
simms22 said:
oh, yea, hardware wise there has been an improvement. the n5 doesnt throttle as much or as hard as the n4. and thats odd that franco didnt expose the files for thermal throttle, many other kernels do.
Click to expand...
Click to collapse
I read that Nexus 5 still throttles a lot compared with another SnapDragon 800 SoC (Galaxy Note 3):
http://arstechnica.com/gadgets/2013/11/when-benchmarks-arent-enough-cpu-performance-in-the-nexus-5/
Yeah it does. 65-70 degrees C for frequency-core throttle respectively I believe.
I've set mine to 80-85 though that is NOT a recommendation!
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
simms22 said:
you can use a root file explorer(if you have root) to disable/turn off thermal throttle. the file is located in /sys/module/msm_thermal/parameters/enabled/ then change the Y to a N.
Click to expand...
Click to collapse
I am on stock kernel, tried it and then ran the antutu benchmark, at 27% the phone restarted and the N was changed to Y after booting the phone.....any idea why the phone restarted?
aavvaallooss said:
I read that Nexus 5 still throttles a lot compared with another SnapDragon 800 SoC (Galaxy Note 3):
http://arstechnica.com/gadgets/2013/11/when-benchmarks-arent-enough-cpu-performance-in-the-nexus-5/
Click to expand...
Click to collapse
thats because of the code, not the device. samsung sets it up how they want it, just how google sets it up how they want it. but its not a bad thing. i run my device with throttle disabled, but i dont care about heat. if google made it not throttle, all we would be reading about is how hot the nexus 5 gets. and it gets pretty hot with throttle on!
---------- Post added at 01:57 PM ---------- Previous post was at 01:54 PM ----------
varuntis1993 said:
I am on stock kernel, tried it and then ran the antutu benchmark, at 27% the phone restarted and the N was changed to Y after booting the phone.....any idea why the phone restarted?
Click to expand...
Click to collapse
you hit thermal shutdown. its really easy to do with antutu, even with throttle on. why did it reset it, did you save your edit or did you just change it and exit?
simms22 said:
thats because of the code, not the device. samsung sets it up how they want it, just how google sets it up how they want it. but its not a bad thing. i run my device with throttle disabled, but i dont care about heat. if google made it not throttle, all we would be reading about is how hot the nexus 5 gets. and it gets pretty hot with throttle on!
---------- Post added at 01:57 PM ---------- Previous post was at 01:54 PM ----------
you hit thermal shutdown. its really easy to do with antutu, even with throttle on. why did it reset it, did you save your edit or did you just change it and exit?
Click to expand...
Click to collapse
I did save and exit.
edit -did it again and restarted the phone and it again changed to Y ......looks like google has done some hard coding
varuntis1993 said:
I did save and exit.
edit -did it again and restarted the phone and it again changed to Y ......looks like google has done some hard coding
Click to expand...
Click to collapse
oh, i misunderstood the first time. it doesnt stick after a reboot. after a reboot you have to disable throttle again. there are kernel control apps that do it as well, i use the trinity kernel toolbox to disable thermal throttle usually(but have to disable it after every reboot).
varuntis1993 said:
restarted the phone and it again changed to Y ......looks like google has done some hard coding
Click to expand...
Click to collapse
Everything in /sys "belongs" to the kernel and is set by the hardcoded values in the kernel when the system is rebooted. This is why we need to use apps or scripts to change the /sys values after (or at) boot
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
simms22 said:
you can use a root file explorer(if you have root) to disable/turn off thermal throttle. the file is located in /sys/module/msm_thermal/parameters/enabled/ then change the Y to a N.
Click to expand...
Click to collapse
Strange, I looked at my nexus 5 and this file is already N... I have a stock 4.4.2 with a gravity box, and it still have thermal throttle...
Somebody help me...
Thanks a lot!
I have attached a picture of a search app that looks malicious should I be worried about this?
This is the old Google quicksearchbox
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
rootSU said:
This is the old Google quicksearchbox
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Click to expand...
Click to collapse
Should it be on my phone? Its installed in /System ?
Dogie52 said:
Should it be on my phone? Its installed in /System ?
Click to expand...
Click to collapse
Yes, nothing to be worried about.
Chromium_ said:
Yes, nothing to be worried about.
Click to expand...
Click to collapse
Alright thanks I just thought it was odd it was never removed it's outdated
Even when I remove the app it just comes back like it can't be uninstalled with TB
Dogie52 said:
Even when I remove the app it just comes back like it can't be uninstalled with TB
Click to expand...
Click to collapse
If you want to remove it delete manually from /system/app with a root file explorer.
Chromium_ said:
If you want to remove it delete manually from /system/app with a root file explorer.
Click to expand...
Click to collapse
That worked just about to post my question now is though does anyone else have this app on there phone?
Dogie52 said:
That worked just about to post my question now is though does anyone else have this app on there phone?
Click to expand...
Click to collapse
Yes Ive had it in the past, but I always delete it. I think its part of the gapps package.
Chromium_ said:
Yes Ive had it in the past, but I always delete it. I think its part of the gapps package.
Click to expand...
Click to collapse
Thanks for your help its truly appreciated
Sent from my Nexus 5 using Tapatalk
Speedtest app fails to open. Error message: "Unfortunately, Speedtest has stopped".
Logcat
Sent from my Nexus 5
Might be worth telling the dev of the app rather than asking here...
Presume you cleared data on the app? Made any changes since it last worked?
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
rootSU said:
Presume you cleared data on the app? Made any changes since it last worked?
Click to expand...
Click to collapse
Thanks for your response. Yes, I cleared the Speedtest app's data, uninstalled/re-installed, and cleared cache and Dalvik in recovery.
EDIT: The only thing I remember doing since it last worked is to test an app called Android Tuner. I ended up uninstalling it.
BTW, I also fixed permissions.
Have you frozen anything? Or changed any location things?
Mine still works so its not an update
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
rootSU said:
Have you frozen anything? Or changed any location things?
Mine still works so its not an update
Click to expand...
Click to collapse
I just defrosted everything and tried to run the app, but, apparently, that's not the problem.
I don't think I changed the location of any files, if that is, in fact, what you mean. If you mean location, as in geographic, no, I don't think that I have changed anything either in that regard.
BTW, Did I create and post the logcat correctly? I had never done it before. Thanks
PhilipTD said:
Speedtest app fails to open. Error message: "Unfortunately, Speedtest has stopped".
Logcat
Sent from my Nexus 5
Click to expand...
Click to collapse
Did use use any permissions manager?
Sent from my Nexus 5 using Tapatalk
Juansegovia20 said:
Did use use any permissions manager?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Negative
Sent from my Nexus 5
Are you running the latest version of Speed test? The was a recent version that FC'd on the Nexus5 but the current version seems to run.
stevemw said:
Are you running the latest version of Speed test? The was a recent version that FC'd on the Nexus5 but the current version seems to run.
Click to expand...
Click to collapse
The one on the Play Store.
Sent from my Nexus 5
Any other ideas out there?
Thanks
Sent from my Nexus 5
PhilipTD said:
Any other ideas out there?
Thanks
Sent from my Nexus 5
Click to expand...
Click to collapse
I'm runnung Versin 3.0.3 (small print at bottom of settings page -- no longer any problems.
stevemw said:
I'm runnung Versin 3.0.3 (small print at bottom of settings page -- no longer any problems.
Click to expand...
Click to collapse
Thanks. That's the version I'm trying to use.
There must be some problem data hidden somewhere.
PhilipTD said:
Thanks. That's the version I'm trying to use.
There must be some problem data hidden somewhere.
Click to expand...
Click to collapse
Cleared cache?
stevemw said:
Cleared cache?
Click to expand...
Click to collapse
Yup.
PhilipTD said:
Yup.
Click to expand...
Click to collapse
One last try -- HSPA[+] or LTE?
---------- Post added at 12:43 AM ---------- Previous post was at 12:39 AM ----------
Try the FCC speed test: https://play.google.com/store/apps/details?id=com.samknows.fcc
---------- Post added at 12:50 AM ---------- Previous post was at 12:43 AM ----------
You know, I may have stopped getting errors from Speedtest when I switched to the ART runtime.
As there is no official Q&A thread dedicated to the CM13, I thought I'd make one myself on behalf of @Olivier
Any questions, Ask away and it will be answered..
Link to the development thread:
http://forum.xda-developers.com/xperia-l/orig-development/rom-cyanogenmod-13-0-t3254779
Simple stuff to follow before reporting a bug/error:
1. Make a clean install.
2. Any FC or crashes, report with a logcat.
Click to expand...
Click to collapse
guys the download link on the first page is broken...
Are you sure ? If yes, I'll mirror it maybe(If Olivier allows me to)... @Olivier, please check it out..
Edit- yep, its down/..
priyank.g said:
Are you sure ? If yes, I'll mirror it maybe(If Olivier allows me to)... @Olivier, please check it out..
Edit- yep, its down/..
Click to expand...
Click to collapse
I am happy to help in this forum, that I regret that there are sections that by not having more than one certain number of comments you can not comment. happened to me that any could have helped and have not been able to put my solution I am sorry that this is so I do not agree at that point in this forum, there are people who can provide much, and surely have not been able to publish their respuestae of aid. Thanks again for opening a post in which everyone can participate or what it is to help deserroyar the system, thank you.
Hey guys its been a long time since I've been on xda. So I'm currently running lollipop and just want to clarify a few things if that's alright with you guys. Firstly does anyone know if doze mode works on this build because i was really excited about this feature. I also want to ask one more thing. Do you guys use the adoptable storage feature? If so how are you finding it and are there any bugs with it. That's it guys sorry for the long post but i hope i get some feedback of you guys. Thanks for reading.
No, doze isn't there.. also, the adoptable storage works fine.. but like we could move ONLY SOME APPS to the SD Card in previous android versions, it is the SAME to be honest... am using it currently.. but it can help save some space for new apps...
The only problem is, we still can't choose to directly download apps to the Ext SD.. like if you download a big game, like FIFA 15 or something, it won't get downloaded..
Also, you may like to know that the Camera doesn't work in the latest alpha(ALPHA 3) as of now
priyank.g said:
No, doze isn't there..
Click to expand...
Click to collapse
any idea if its going to be implemented in a future version ?
priyank.g said:
No, doze isn't there.. also, the adoptable storage works fine.. but like we could move ONLY SOME APPS to the SD Card in previous android versions, it is the SAME to be honest... am using it currently.. but it can help save some space for new apps...
The only problem is, we still can't choose to directly download apps to the Ext SD.. like if you download a big game, like FIFA 15 or something, it won't get downloaded..
Also, you may like to know that the Camera doesn't work in the latest alpha(ALPHA 3) as of now
Click to expand...
Click to collapse
Thanks for the response man, appreciate it a lot. Shame about the camera or i would have flashed the build. Thanks again.
arnavb8 said:
any idea if its going to be implemented in a future version ?
Click to expand...
Click to collapse
Possibly, Even I am eager for it.. but can't say anything..
guys any news on a new download link?
guys does posting logcats reveal any personal data or identity?
also, should i take logs immediatly after the bug happens?
fazorni said:
guys does posting logcats reveal any personal data or identity?
also, should i take logs immediatly after the bug happens?
Click to expand...
Click to collapse
No, logcats do not reveal your personal data...
Yeah, you should take logs as soon as the bug takes place
What bug did u face btw?
I have a question myself,
Can't the cm12.1 cam libs be used to fix the cam bug?
If the camera libs from the Alpha 1 could be PMed to me by someone, I can try fixing it in the Alpha 3 maybe?
Cant flash gapps
can you share a custom kernel to use with this kernel because i cant flash gapps with phillz touch and couldnt find twrp to work with rom.
KnightofTheHell said:
can you share a custom kernel to use with this kernel because i cant flash gapps with phillz touch and couldnt find twrp to work with rom.
Click to expand...
Click to collapse
Use this app
http://forum.xda-developers.com/xperia-l/development/app-recoveries-recovery-installer-t3187915
Required root
Can someone mirror the link download while oliveer's hostweb down?
FantasticalX said:
Can someone mirror the link download while oliveer's hostweb down?
Click to expand...
Click to collapse
The file has changed: Newest is of 27th as build date:
https://dl.srvr.tech/taoshan/cm-13.0/exp/
saldor said:
The file has changed: Newest is of 27th as build date:
https://dl.srvr.tech/taoshan/cm-13.0/exp/
Click to expand...
Click to collapse
Is there a Changelog for this build? Just asking because the OP says that the latest build is currently 20th.
adil089 said:
Is there a Changelog for this build? Just asking because the OP says that the latest build is currently 20th.
Click to expand...
Click to collapse
Hoping to see if the camera already fixed in this build
FantasticalX said:
Hoping to see if the camera already fixed in this build
Click to expand...
Click to collapse
i already tested and...
no, its not fixed
AndreiSant said:
i already tested and...
no, its not fixed
Click to expand...
Click to collapse
Thanks for trying bro. It saves a lot of people time.:thumbup: