Installation:
Install a 4.4 compatible recovery, and reboot to recovery if you did so.
Format /system, /data and /dalvik cache.
Flash a compatible radio (see below).
Flash the ROM.
Flash GApps.
Reboot and enjoy!
Known Issues:
Power-off charging animation not working.
You tell me...
Reporting Issues:
Do NOT report issues here if you're running a non-stock kernel, Xposed and/or modules, or any other non-stock mods.
For bug reporting (stock Slim ROM/kernel/GApps only), please use the Slim Bugreport tool, accessible through Settings > SlimCenter > Bugreport to produce a zip file in the phone's storage which you then can upload to the SlimROMs Skyrocket Subforum for review. Please see Reporting Bugs on the Slim web site for more information.
Any issues please explain with specific details, how to reproduce the problem, and provide a Slim Bug Report (preferred, in the ROM), or a logcat. Good feedback is ESSENTIAL.
Installation Notes:
Radios: Make sure you are running the UCMC1 or UXUMA7 or newer radio, and follow the installation instructions linked to in post #1. Thank @mohan_kr for his flashable radio contributions
Recovery: Recommended recovery is philz_touch_6.41.6-skyrocket.zip (flashable), or philz_touch_6.41.6-skyrocket.tar.md5 (Odin). Check out the PhilZ's Skyrocket-specific thread here: [skyrocket][CWM Advanced Edition] PhilZ Touch. Look for updates in PhilZ's goo.im Skyrocket folder.
You can also use TWRP Recovery if you like, but I haven't used it for some time:
[RECOVERY][skyrocket] TWRP 2.7.1.0 touch recovery.
Superuser: The Slim Team has made it so the Superuser App is not enabled by default, requiring users to intentionally turn on Root access. To enable it, navigate to Settings > Developer Options > Root Access and choose Apps and ADB (even though it may appear selected). For this to work, you need to first go to Settings > About Phone and tap on Build Number several times to gain access to the Developer Options.
Also see here: How do I enable Root?
Kernel: The kernel is based on the Moretz CM-11.0 kernel, but overclocking has been disabled to enhance stability. For sweep2wake, fast charge, and CPU freq/governor control features, I'd recommend [ROOT] Kernel Tweaker from the Play store.
Wi-Fi: Wi-Fi connection dropping issues? Check your region code in Settings > Wi-Fi > (menu key) > Advanced > Wi-Fi region code. It may be set to Europe by default, which uses a different set of Wi-Fi channels than the United States.
DPI: For information on changing the screen DPI, see here: How to change the screen density (DPI). Beware that some apps may not play nice with custom values, although normally the Slim GApps are modified to tell the Play Store and a couple other apps that the phone's DPI is always 240.
Enjoy!
[ROM][4.4.4][KTU84Q][DISCONTINUED] SlimKat - Skyrocket [OFFICIAL+Weeklies]
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you will find everything you need to know about SlimRoms.
Slim Downloads - Download the ROM, GApps and other Addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequently asked questions with answers.
Kernel Source - The source of your device's kernel.
See Post #2 for Known Issues and Installation Notes.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Special thanks to (in no particular order):
prbassplayer
wantowan2
Kiltnar
Andrw0830
car vs driver
Disclaimer: SlimRoms are not responsible for any damages to your device.
[ROM][4.4.2][KOT49H] SlimKat - Skyrocket [RC2]
passed op
Please use latest CWM. This is beta so please provide proper logs when things are broken.
Cheers
Please use latest CWM. This is alpha so please provide proper logs when things are broken.
Cheers
This looks great, going to flash now and see how things go. Been on the hunt for a great Android 4.4 Skyrocket ROM.
Nice
Thanks for the rom, will be flashing this momentarily !
Cannot wait to flash this. Thanks slim team for the hard work
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
The screen stopped powering on after I let the device sit for a while.
Debug log attached.
Oooooooh, now THIS I really like to see!
Backing up for flash now... Thanks pr!
Sent from my SGH-I727 using Tapatalk 2
askpcguy said:
The screen stopped powering on after I let the device sit for a while.
Debug log attached.
Click to expand...
Click to collapse
If you press and HOLD the power button to force a reboot - The screen will turn on - It's seemingly somewhat random - I've been able to power off / on the screen repeatedly
- But then it fails to respond again... And have to force a reboot again..
Sent from my SM-N900W8 using Tapatalk 2
askpcguy said:
The screen stopped powering on after I let the device sit for a while.
Debug log attached.
Click to expand...
Click to collapse
Same here.
Although it doesn't work for alpha builds, and I don't know if it is an automated build that has the same display issue or not, the SlimCenter OTA tool shows 4.4 Alpha 1.3 is available.
I also noticed:
The Display>Light Options menu has an entry for Pulse Notification Light, but this is also listed first in the Notification light options.
Activating the Volume Wake option has no effect on the black screen issue.
I couldn't find the TRDS options mentioned in the OP (most everything is black & white in the base theme anyway).
Fast and smooth
EDIT/ADDED: Also, selected Device Administrators don't stay selected following a reboot.
Hey @prbassplayer, do you and/or the Slim folks have enough debug info about the BSOD issue? I nandroided my SlimKat install for later troubleshooting since I didn't have a chance to grab a logcat when I tried it and needed my phone. If you want another, just let me know. I'm thinking it's kmsg you might want, but idk...
Sent from my SGH-I727 using Tapatalk 2
NoSpamDan said:
Hey @prbassplayer, do you and/or the Slim folks have enough debug info about the BSOD issue? I nandroided my SlimKat install for later troubleshooting since I didn't have a chance to grab a logcat when I tried it and needed my phone. If you want another, just let me know. I'm thinking it's kmsg you might want, but idk...
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
It usually is what's asked for. :good:
A logcat and kmsg of while it happens would be great. I have 2 logs but i havent had a chance to take a look at it. I hope to have time tonight or tomorrow night
Sent from my Nexus 4 using Tapatalk
OK, I flashed back to SlimKat here and reproduced the black screen issue. Pulled dmesg, /proc/last_kmsg, and logcat with adb.
Interesting note is that the phone is not completely dead when this happens. When I plug into and remove the phone from my workstation, I hear the charging sound but no screen wake-up or response. I tried to guess where my PIN numbers would be to see if I could unlock the phone with the screen off (and hear the unlock sound), but I couldn't get it.
For dmesg, I get an error "klogctl: Operation not permitted". I tried to save it to the phone but I couldn't define the local phone path correctly (tried /storage/sdcard0/ and some others) but I kept getting "The system cannot find the path specified". If I run adb shell, I can navigate to that folder/storage location and I get the same error message... I'm kind of a noob with adb here.
My free pastebin account is limited to 500k per paste, so hopefully I've captured the errors in the logcat. I saw a bunch of E/qdoverlay lines...
last_kmsg
logcat
What's the deal with the update that is to after install. I click on the OTA and the file isn't found
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Smittiegee19 said:
What's the deal with the update that is to after install. I click on the OTA and the file isn't found
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
The updater doesn't work with Alpha builds...
Sent from my SGH-I727 using Tapatalk 2
Hey all, I haven't seen any new activity on SlimKat alpha or beta versions, but since the CM merge of 4.4.1, I was able to get SlimKat 4.4.1 beta 1.4 to build last night, and I'm testing it on my SR right now.
I have searched for another/new thread, and I've been "F5-ing" the heck out of Slimroms.net looking for updates, lol.
Any idea where SlimKat is publicly at?
NoSpamDan said:
Hey all, I haven't seen any new activity on SlimKat alpha or beta versions, but since the CM merge of 4.4.1, I was able to get SlimKat 4.4.1 beta 1.4 to build last night, and I'm testing it on my SR right now.
I have searched for another/new thread, and I've been "F5-ing" the heck out of Slimroms.net looking for updates, lol.
Any idea where SlimKat is publicly at?
Click to expand...
Click to collapse
Under wraps in the "working out the bugs" department is my guess
Sent from my SGH-I727 using Tapatalk 2
Related
The official app of Goo.im
We have spent a lot of time getting the server side changes in place to automatically parse our developer's rom files to grab data to make a functional OTA update system without the need for editing manifest files, or other tedious tasks. This is our attempt at creating a way for Android developers to simply publish material, and distribute it to the masses without any hassle.
This app is and will always be FREE!
General Features:
Ability to browse and search all of the files we have on our site, and download directly to your mobile device.
Receive OTA style updates from your favorite rom developers that we have hosted here.
CyanogenMod nightly build update support
Incremental (differential) rom updates for sequential builds
Flashing roms & installing recoveries
Update gApps packages
If you would like to sideload the app on your phone and avoid the market, we distribute the APK by itself, and also as a prebuilt repo maintained by solarnz(github.com/solarnz)
Are you a rom developer wanting to publish your work with our updating system?
To get your rom compatible with our updating system, you should make the appropriate changes to your build.props. For more information on this system, see the link below (sorry it's not clickable but i need 8 posts!)
goo.im/howto-rom-updating-via-our-app (For developers who are curious about how to modify their build prop file for compatibility with GooManager)
GooManager download page (To download the actual app)
KNOWN ISSUES:
DownloadManager API is buggy on Gingerbread
Installing OpenRecoveryScript on devices that do not support flash_image and do not have a /cache/recovery/command supported recovery will fail
FEATURE REQUESTS
Feel free to post them in this thread, but as my time is limited and Goo.im/GooManager's code is just something I do in my free time, there are simply not enough hours in the day to address them all
SHOUT OUTS
Chris Solarnz (For his java advice and contributions)
Mike Wielgosz (For contributing to the rom reordering and listing code)
Dees_Troy for all of his amazing work on OpenRecoveryScript and TWRP
eyeballer (For countless nights of helping test stuff, and awesome suggestions)
Shift (For the market icon)
Drmacinyasha (For all the testing / anal retentive bug reporting)
toastcfh (For helping bounce lots of ideas around)
EVERYONE ELSE I PROBABLY LEFT OUT!
FREQUENTLY ASKED QUESTIONS:
Why is _________ phone/tablet not supported?
In order to offer us flexibility without compromising other software such as rom manager premium, etc we did not want to rely on /cache/recovery/extendedcommands. At the time of developing the flash automation features, extended commands were licensed to RM only and it would have been illegal to use them. Since then, the license has changed, but we still feel it is the best direction to have our own since we can change it to fit our needs.
Why does this not work with my recovery i downloaded from Rom Manager?
CWM and CWM touch builds distributed by rom manager ONLY WORK WITH ROM MANAGER SO STOP ASKING!!!! #@$#@$#
Why are incremental updates only available for some roms?
Incremental updates are enabled on a per rom-device basis. Not all builds are even capable of this, since wipe can be required. It is at the discretion of the developer to toggle this as needed.
If you are a developer and would like to sign up: goo.im/signup
If you are a recognized developer, chances are you will get approved. (Note not all buildbox applicants are approved, and you may get only hosting)
Awesome. Used it to put TWRP2.1.2 easily on my ATT Galaxy Note.
It's Goo time! Been using this to distribute my unofficial cm9 nightlies for the touchpad and nook color for a while now and we've had nothing but positive feedback from users. Encourage your favorite rom developers to sign up
Not only is GooManager a great app, the whole ecosystem is, I believe, second to none.
A fantastic, simple system for developers to upload their ROMs and specify what device that ROM is for.
Easy for device users to find the ROMs that work with their devices.
Notifications of ROM updates for the ROM that you're using.
Easy download and installation of ROMs for devices with a supported recovery.
Differential updates - only flashes the files that have changed from one version to the next - smaller download, less wear and tear on your device, and quicker updates.
Thanks for this free app!
People don't have to donate to automatically check if there is an update to a CM nightly now.
for those of us who are not update-happy (although it is addicting) is there anyway to know from either this app or from Goo notifications in general whether an update requires a full wipe and then the requisite re-setting up of one's device?
I get a notification everyday for the new Gapps and for an update of my ROM (AOKP milestone 5 for Kindle Fire). I've ignored them because I'm just too lazy to spend an hour or two getting everything back up and running.
I've tried repeatedly to download CM9 nightlies and gapps via the latest market version of the app (2.06 I believe) and I always get a "download failed" message no matter if I'm on wifi or 3g. I've tried uninstalling and reinstalling, clearing cache, and clearing app data, and nothing seems to work. Is the download manager problem referenced in the OP a problem with ICS as well as GB? I have a Galaxy Nexus (toro) using BAMF Paradigm 1.25 in case that info makes a difference.
Sent from my Galaxy Nexus using Tapatalk 2
lanceman5000 said:
I've tried repeatedly to download CM9 nightlies and gapps via the latest market version of the app (2.06 I believe) and I always get a "download failed" message no matter if I'm on wifi or 3g. I've tried uninstalling and reinstalling, clearing cache, and clearing app data, and nothing seems to work. Is the download manager problem referenced in the OP a problem with ICS as well as GB? I have a Galaxy Nexus (toro) using BAMF Paradigm 1.25 in case that info makes a difference.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Please get a logcat. It will give you a reason why the download failed. If you are on linux, adb logcat | grep GOO
There seems to be issues with some people or devices that I have yet to narrow down. If you can replicate this bug consistently please contact me on freenode IRC in the #goo-inside.me channel and i'll try to look into it. My time is limited these days hunting a bug i can't reproduce so despite the needs of the community -- work and life comes first!
peters4n6 said:
for those of us who are not update-happy (although it is addicting) is there anyway to know from either this app or from Goo notifications in general whether an update requires a full wipe and then the requisite re-setting up of one's device?
I get a notification everyday for the new Gapps and for an update of my ROM (AOKP milestone 5 for Kindle Fire). I've ignored them because I'm just too lazy to spend an hour or two getting everything back up and running.
Click to expand...
Click to collapse
It is up to the developer to state whether it requires a wipe in their changelog. Generally nightly builds will not require a full wipe though
thereals0up said:
Please get a logcat. It will give you a reason why the download failed. If you are on linux, adb logcat | grep GOO
There seems to be issues with some people or devices that I have yet to narrow down. If you can replicate this bug consistently please contact me on freenode IRC in the #goo-inside.me channel and i'll try to look into it. My time is limited these days hunting a bug i can't reproduce so despite the needs of the community -- work and life comes first!
Click to expand...
Click to collapse
I have no clue what I'm looking at, but here is the logcat of a download attempt. At least I hope this is what you meant.
http://db.tt/bpWD2LWo
Sent from my Galaxy Nexus using Tapatalk 2
Anybody can explain how to use with Galaxy note CM9?
I'd li ke to flash nightly in diff mode. First of all do I need to unistall cwm and install the open recovery?
Somebody has already tried?
Inviato dal mio GT-N7000 con Tapatalk 2
I like this app man, Good work...
Great job, it's nice to see such a useful app for no cost.
Raistlin82 said:
Anybody can explain how to use with Galaxy note CM9?
I'd li ke to flash nightly in diff mode. First of all do I need to unistall cwm and install the open recovery?
Somebody has already tried?
Inviato dal mio GT-N7000 con Tapatalk 2
Click to expand...
Click to collapse
You simply install goomanager, hit menu -> install openrecoveryscript which will DD over the image to your recovery partition for twrp 2.0.
As far as differential patches go, the feature is still being enabled on a per-rom basis while I make sure there are no bugs CM nightlies in general do not have it enabled yet but some devs do.. the list will improve but i don't want to make any big changes until I am 100% positive the incremental system is perfect
I'm having quite a few failed downloads recently via goomanager, anybody else?
Not sure if this is device related issue or they app/appserver etc.
Using GTAB P1000 btw.
This thing is a piece of crap if you are trying to download on 3g.
superstargoddess said:
This thing is a piece of crap if you are trying to download on 3g.
Click to expand...
Click to collapse
Please keep this conversation constructive. If you have anything relevant to resolving the issue go ahead and post it but complaints are not helpful. If you have a failed download, paste a logcat or simply the line which gives a numerical code for why the download failed. The tag will be "GOO"
We are aware of downloading issues but since this is just a project we do strictly on free time for no profit, we can only get what we can afford which is why we are on all used hardware and frequently have hiccups with our distribution boxes. We're looking into getting more in the rotation to lower the load on the servers but there are not enough hours in the day or dollars in the bank account to handle it right away. We're looking into financing some sexy new servers from dell if we can get approved
thereals0up said:
You simply install goomanager, hit menu -> install openrecoveryscript which will DD over the image to your recovery partition for twrp 2.0.
As far as differential patches go, the feature is still being enabled on a per-rom basis while I make sure there are no bugs CM nightlies in general do not have it enabled yet but some devs do.. the list will improve but i don't want to make any big changes until I am 100% positive the incremental system is perfect
Click to expand...
Click to collapse
Ok so I prefer to wait...I have no rush.
But it is safe to install the openrecovery? I mean 0% of brick over n7000 running CM9
Inviato dal mio GT-N7000 con Tapatalk 2
thereals0up said:
Please keep this conversation constructive. If you have anything relevant to resolving the issue go ahead and post it but complaints are not helpful. If you have a failed download, paste a logcat or simply the line which gives a numerical code for why the download failed. The tag will be "GOO"
We are aware of downloading issues but since this is just a project we do strictly on free time for no profit, we can only get what we can afford which is why we are on all used hardware and frequently have hiccups with our distribution boxes. We're looking into getting more in the rotation to lower the load on the servers but there are not enough hours in the day or dollars in the bank account to handle it right away. We're looking into financing some sexy new servers from dell if we can get approved
Click to expand...
Click to collapse
Sorry, was just being honest! ^^
Edit: I'd totally donate if it were reliable on 3g!
superstargoddess said:
This thing is a piece of crap if you are trying to download on 3g.
Click to expand...
Click to collapse
Then complain to your 3G provider dumbass.
Download link and changelog are at the bottom of the page!
GALLERY,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TUTORIAL,
DONATIONS,
to molesarecoming
to D4rKn3sSyS
to jaybob413
to aaronpoweruser
Donate to scott.hart.bti
CREDITS,
AOSP/Google, Cyanogenmod, Goo, XDA, Krebsmilk, giannisgx89, Liquid,
AOKP, our users, supporters and donators, everyone who's helped us in the past,
heartfelt thanks to all of you!
LINKS,
Website: www.paranoid-rom.com
Github: www.github.com/paranoidandroid
Gerrit: review.paranoid-rom.com
BANNERS,
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
CWM: Wipe Cache / Factory Reset
Install ROM: Scroll down for downloads sectoion
...The package will start to install..
...Phone will reboot into the install screen again...
...Continue to install [Automatically] If not manually flash again
...Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Coming from JB(4.1)
CWM: Wipe Cache / Factory Reset You should be fine without this step, but it is HIGHLY recommended as it makes certain all bugs are wiped clean.
Install ROM: Scroll down for downloads
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Downloads Section
Make Certain you read this ENTIRE post before Downloading... I know you didn't Go back and read it! :good:
Builds/ROMs:
ParanoidAndroid 3.60 - 6/15/13 - MTD - Butter
ParanoidAndroid 3.15a - 4/6/13 - MTD - Butter
ParanoidAndroid 3.15 - 3/24/13 - MTD - Butter
GAPPS:
Install Gapps: New GAPPS 20130301 - Official Android 4.2.2 GAPPs package.
Install Gapps: Here (the latest for Android 4.1.1) - Anything before PA 3.0
ParanoidAndroid 3.15a - 4/6/2013 - Basic source update. Pulled newest and latest PA sources. Please check the PA page for their full changelog.
ParanoidAndroid 3.15 - 3/24/2013 - Basic source update. Pulled newest and latest PA sources. Please check the PA page for their full changelog.
ParanoidAndroid 3.10 - 3/4/2013 - Will update tomorrow... need sleep
ParanoidAndroid 3.0 - 2/20/13 - Take three... Another stability release... I told you guys there was a lot of working that needed to be put into this to get it working correctly on our device. Fixed APN force close. Fixed Wifi tether. May have fixed USB tether (let me know). Fixed FC when selecting USB connections from settings - storage. Added CPU boosting. Fixed tethering issues on startup. Added storage manager to tablet mode (able to use USB correctly). pulled latest PA source code.
ParanoidAndroid 3.0 - 2/20/13 - Take two... Stability release to fix issues from the initial 3.0 release. Fixed deep sleep issues, BT should now be functional, Fixed kernel to better work for an AOSP build. Stability changes made throughout the build to suite our device. Intentionally broke USB tethering for now.. Want to see if that is the cause of the couple of notification pull down freezing issues that have been reported.... For those of you that were having the issue, please let me know if you noticed any difference. Id suggest upgrading to this build as battery life should be improved.
ParanoidAndroid 3.0! - 2/18/13 - Thats right! Paranoidandroid is back to the infuse!! Based off AOSP 4.2.2 source. Huge thanks to the ParanoidAndroid team for this awesome beautiful piece of work that we were able to get working on our device. Words wont describe it, you need to flash this to experience it for yourself! - Everything should be working for the most part... There were alot of changes/patches i needed to add in order to get this working on our device. As of now, Bluetooth is completely busted. I havent looked at it much, but it shouldnt be to tough to fix. Ill get working on that tomorrow. Do not use this if you need to use bluetooth!!!!
ParanoidAndroid - 11/18 - For those of you that were reporting issues (reboots) from the previous build, this is an update for you. Download and Flash this Kernel. I reverted some of the minor changes that more then likely caused the trouble. I have no idea why some of you were having horrible problems and why some of you were not, but i guess that pretty much indicates how horribly F'ed our kernel is and that the smallest freaking change causes havoc for some users. Going forward, im not even touching the kernel or looking into changing anything kernel wise unless its a standard cm change for ALL samsung kernels.
ParanoidAndroid - 11/04 - First and foremost... Fixed my mistake that took away the 8mp option for camera... That is now back (thanks to everyone that pointed it out). Next... OC kernel has been migrated into main kernel. That means no more separete OC kernel. Just one kernel with 1400 and 1600 mhz steps. Now... With this option added, Please use caution using those levels and use common sense. If the phone reboots or you have any issue at 1600 and think that something is wrong with the build, please change frequency back down to stock 1200 and if it stops, then obviously oc isnt working good for you. DO NOT REPORT IT as a bug in the build! JT added an option into the cm source files that allows us to set long press actions from the lock screen. Its pretty neat... You can specify values such as flashlight control and media controls from the capacitive keys and to activate, just long press whichever button you set. That option can be found in settings - lockscreen. I optimized more of the kernel values (again) and gave us an extra 13 MB of RAM. I updated wifi drivers again. There have been a small number of reports that when the phone goes into deep sleep and then they wake, wifi does not reconnect. Im not sure if the wifi update fixed that or not, but if you happen to be one of the few that experience this issue, just download and use wifi fixer. I tested it with no issues or complaints. Updated kernel compression/decompression files. Added encryptable footer (fixes cryptofs errors in logcat). Enabled expandable desktop option. Few kernel changes/optimizations here and there. Merged latest PA/CM source code which includes alot of fixes for the color layout from paranoid android settings menu.
ParanoidAndroid - 10/28 - WOW! This seemed like a small update at first, but it got huge. Not only from changes on the source on our end, but also the changes on the PA side. Lets start off with the big things... The reboot into recovery when applying your settings issue has been FIXED. There is no longer an OC kernel... Why you ask? Because I added the OC options to the stock kernel and it is stable as before even when using the OC features. Added a few fixes device side for auto brightness (should make it a little better) and also camera. Reverted one or two questionable changes to ensure stability. Added a few changes on the kernel side to make dvfs code more efficient, fixes for wifi (only a couple minor ones.), update touchscreen driver, update kvm code to handle pages more efficiently. Corrected the camera preview/picture sizes (they seemed to be off before). Removed unused/unsupported code on device side. Added overlay config for the home key to unlock device feature to work correctly and the option is found from settings - lock screen - screen security - home unlock. Oh BTW.. latest PA source has been merged... They have been busy. They have added a new option to the Paranoid Preferences menu called 'Colors'.. It basically just automatically changes the status bar color for different apps you open. It is pretty neat. They have added a ton of other customizable features as well... Honestly... Im not sure what else they can come up with...
ParanoidAndroid - 10/22 - Will update in the morning... I need sleep right now. Download it and find out for now.
ParanoidAndroid - 10/19 - We now have Dock audio! Big thanks to araemo for getting dock audio working correctly. The dock audio feature can be found from settings - advanced - dock. Fixed the delayed capacitive keys... Very rarely sometimes when locking the phone, the screen would flicker back on and then capacitive keys would be delayed before becoming responsive. I claimed to have fixed it last build, but im almost certain that i definitely fixed them this time. I patched a few files in the kernel that were causing issues which should make the build even more stable (not that it wasnt before). Fixed an issue with our calibration driver not reading the correct file on boot up... It is now set to correct path and reads the file as it should. Pulled kernel wireless drivers from siyah kernel. This should improve wifi usage and get us a little more up to date with current sources (we still got a loooong way to go). Added ISO options to camera thanks to a commit from JT. Merged latest PA/CM source. Set up Goo.im, you can find me under devs - scotthartbti. I have modified the build.prop to accomplish OTA updates for next release.... And i think that about does it.
ParanoidAndroid - 10/14 - Updated build already? I think so! This build is mainly little bug fixes and missed things from the 4.1.2 source merge, but there are some key things from our device end that make it worth downloading. I optimized our kernel code a bit and freed up about 35 - 40 mb of RAM without sacrificing anything at all. I believe i have fixed the delayed response keys that would very intermittenly show up (most of u probably have never noticed), I have enabled installation of unknown apps by default (was tired of having to enable it everytime id restore from titanium)... I know there are a few other small things im missing, merged latest PA/CM source.
ParanoidAndroid - 10/11 - Android 4.1.2 is here and ready to go on the infuse! Please search for Android OS changes from 4.1.1 to 4.1.2 as im not going to list every single change they have made. I have fixed up the power HAL this build, should be fully functional now (Thanks araemo). Added zRam, which is enabled/disabled from settings - performance. Slight clean up in device tree. Made a change that should improve GPS lock time. Everyone that i had test it reported improvements.... remember, it may still take a minute or two for the initial lock, but after that it should be good to go, atleast it was for myself and the people who tested. Merged latest PA/CM source code. *** Previous GAPPs will work, no need to go searching for newer GAPPs.****
ParanoidAndroid - 10/5 - New partition layout to increase /system to 400mb to avoid any possible space issues. We previously had 350mb and we were cutting it very close! Added power HAL for our device and also added pulse boosting to the ondemand governor... Its pretty nice. Few minor fixes here and there. Lockscreen has a transparency option. Notification toggles have been added to notification list. Nav keys have customizable options added to them. Cleanup, bugs fixed. Merged latest PA source code. - PLEASE READ THIS BEFORE DOWNLOADING AND FLASHING!!!!: I had people test the following install and they left their external SD cards in the phone and had no issues, but if you do have an issue, remove external sdcard and try again. This latest build has been repartitioned so that /system is larger. system was previously 350mb and we were running out of space, so in order to avoid space issues, /system has been increased to 400mb. Now, since the partitions have changed, that means that they are going to wiped out and setup again when you flash the zip. This is going to cause the same behavior as the initial bml to mtd conversion flash. If you are on the previous MTD partitions, When you first flash, it will give you a warning message saying that your data will be erased in converting and you must flash again to and stop and you will see the dead android guy. This is just a warning message and is meant to be seen!!!. You will then need to flash again and this time it will start the conversion and then reboot into recovery and finish the conversion and then reboot into recovery again when it is finished. If you are on BML and converting to MTD for the first time, once you flash the package it will just start to install and reboot 2 times during the install process. When it comes back up the second time, you are finished and can proceed. You can then install GAPPs if needed or just boot up like normal. One last FYI... If you use an OC kernel, you need to use the newest one with the new partitions laid out or your gonna have some issue. Do NOT use old OC kernel on this new build.
ParanoidAndroid - 9/27 - Fixed Battery drain issue from 9/23 build that was removed. Fixed data indicator issue. Added support for suspend mode in charging, merged latest source - USB Tethering is now working thanks to thebecoming! Reverted a couple changes that i believe was causing issues for a couple people on last build, you guys should be good now. Added smartassv2 and interactive governors. Tweaked Conservative governor (thanks entropy). Cherry picked a commit for promixity sensor settings from phone - settings. Various upgrades to kernel. Merged latest PA source code.
ParanoidAndroid - 9/15 - Bunch of changes... Merged a bunch of aries changes that were previously overlooked.. Fixed the MMS issue that random people were having... araemo fixed torch.. it is now functioning perfectly and the torch app is included.. the other flashlight app has been removed. Thanks araemo! remapped search key to work with hardware key options... Updated the kernel bt drivers which in turn fixes the BT disconnect issue a few have reported.. merged latest PA source code... Updated to latest ParanoidPreferences.. A bunch of other things i forgot.
ParanoidAndroid - 9/6 - Paranoid Settings app has been giving an overhaul. They have added an extra option from the app. It gives you even more ability to completely customize things as you seem fit. Added LED flashlight app from market. It works as it should. PA wall papers have been added. Cleaned up the kernel code a bit... Nothing major. All latest PA source code has been merged. Few little things here and there.
ParanoidAndroid - 8/26 - Added OC kernel option to main page. Has 1400 and 1600 mhz steps. Seems pretty solid from stress testing and feedback from the test team. Give it a try. Cleaned up a little more of the source code in our tree, changed some of the MMS values in the overlay.
ParanoidAndroid - 8/25 - Not much physical change, but tons of changes/fixes to make things better. Now able to see Data Usage from settings menu. GPS locks crazy fast and is accurate as its supposed to be. Wifi Tether completely works. Quite a few kernel patches. Revamped the sensor code for our device. Added overlay to predefine a few apps such as MMS and Trebucet. Merged latest PA source code. You know you want this.
FYI... I am debating uploading my OC kernel i just created.. Frankly i dont think its needed and dont agree with it, but the people seem to want it and who am i to stop them.
ParanoidAndroid - 8/18 - This is not an official PA update, this is more of a personal fix things and make it better update. I have added 2 new layouts to the Paranoid Preferences configuration menu.. The option are now Stock, Hybrid, Phablet small, Phablet mid, Tablet small, and Tablet mid. Wifi tether is now partially working.. For whatever reason it doesnt work when you set security, but if you set it up as open, it works fine. Changed out the GPS script.. Users have reported faster lock times and more accurate location fixes. This was created by Marty331 and all credit goes to him. Merged the latest PA source code. Removed alot of the bloat files to make the zip package alot smaller then before and free up space. Enabled back to kill button. And a few other things i cant think of right now.
ParanoidAndroid - 8/15 - Jellybean ParanoidAndroid has begun! This has been compiled from CM10/ParanoidAndroid source code. This is a starting point for a ROM that is complicated as is... So you may run into an issue here or there. Enjoy!
Paranoid Android changelog
All of the source code for PA/CM builds can be found Here: My Github
Congrats man, looks great. :good:
jblparisi said:
Congrats man, looks great. :good:
Click to expand...
Click to collapse
Thanks man, its definitely got some unique options.
nice, u got it working! are there any bugs??
Zomg zomg zomg. Awesome work bro. You are like the messiah! You are like the child of Jesus and Elvis. This is just too much.
Best rom yet!
Sent from my SGH-I997 using Tapatalk 2
very nice! gonna have to try it!:good:
Good stuff man
Edit:
DON'T flash FROM ANY SAMSUNG ICS OR ROMS BASED ON SAMSUNG KERNELS (my CM9, AOSP, etc)
Flash any stock GB rom with odin / or any GB kernel [instructions] root device [instructions] and reboot into recovery once again before flashing this
Click to expand...
Click to collapse
Is that necessary or will it work fine from an ICS rom?
Sent from my SGH-I997 using xda premium
vkumar2695 said:
Good stuff man
Edit:
Is that necessary or will it work fine from an ICS rom?
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
It'll be fine from ics... just ignore that
bradman117 said:
nice, u got it working! are there any bugs??
Click to expand...
Click to collapse
Yea if you change the one dpi setting, it will cause some apps to close... I'd suggest selecting the stock layout for dpi. The other thing I noticed was the manage apps option causes a fc. Other then that I haven't noticed anything
im getting "installation aborted"?status 7 if that means anything? i went back to gb and everything...
is the download supposed to say paranoid-note? doesnt look like the right download?
pqrs said:
im getting "installation aborted"?status 7 if that means anything? i went back to gb and everything...
is the download supposed to say paranoid-note? doesnt look like the right download?
Click to expand...
Click to collapse
i did have the wrong download... below the installation video is a link to the wrong rom.. might wanna remove that! im sure i wont be the only one to download it by mistake.
pqrs said:
im getting "installation aborted"?status 7 if that means anything? i went back to gb and everything...
is the download supposed to say paranoid-note? doesnt look like the right download?
Click to expand...
Click to collapse
You need to download from my link.... not there link...
Sent from my SGH-I997 using XDA
pqrs said:
i did have the wrong download... below the installation video is a link to the wrong rom.. might wanna remove that! im sure i wont be the only one to download it by mistake.
Click to expand...
Click to collapse
The correct link is right on the top before all their images... in big bold letters... saying download paranoidandroid infuse. honestly you may be the only one
Sent from my SGH-I997 using XDA
Looks good so far, but I second the FC when you access "Apps" from Settings (or Menu > Manage Apps).
hmmm... stuck at the galaxy screen now.. odin here i come! im not having much luck flashing this? i did it exactly like that video said, odin gb, flash, wipe, reboot.. stuck at galaxy screen. im trying again, ill let ya know how it goes! i hope i can get it working, i really want to try this!:good:
olliefares said:
Looks good so far, but I second the FC when you access "Apps" from Settings (or Menu > Manage Apps).
Click to expand...
Click to collapse
Something ill need to look into... This is pretty much the test run.. currently a couple bugs, but definitely useable.
odined back to gb again, did everything exactly like the video says and it sticks at the galaxy s screen, cant get into recovery, just stuck there. twice, exactly the same way?
i noticed that the gb i odined has red recovery, does that have something to do with it? i tried rebooting recovery to see if it would give me blue, but it just gets stuck at the boot screen and doesnt go back to recovery without odin..
Its probably same installation instructions as unofficial cm9 since its cm9 based. Flash reboot stuck at Samsung 3 finger salute format data system cache reflash rom and gapps reboot enjoy.
Sent from my SGH-I997 using xda premium
yeah... i cant 3 finger after installing it.. it just sits at the galaxy screen? i 3 finger and it reboots and sits at the screen again until i odin. going on my 5th try...
Sweet cant wait to flash just installed Uniporn build 40 btw don't we need to flash hybrid apps with this rom also will it have the new play store with updated apps.
Sent from my SGH-I997 using xda premium
Thomas.Raines and Team Fah-Q! presents
source code Lightning_Zap_Powered CM-10 Unoffical for SGH I577
https://github.com/TeamFahQ/msm8660-common_lz_kernel.git
https://github.com/TeamFahQ/msm8660-common_LZkernel_tools.git (scripts and zipalign binary)
A BIG THANK-YOU goes out to DR4ASTIC for the many months of work he put into porting cm-10 and our kernel so if you see him hit his thanks button, and if you have the means help get him some soap..lol Also thanks to Thomas Raines for bringing us LZ. the site will be under construction for a while as I have had a few requests for links to the various guides and tuts I've used to learn how to build...mind you it takes alot of time and research but to me its deffenitly worth it...Here is a thread for the blaze TFQ tweaks and install instructions for the LZ kernel. also features from this thread http://forum.xda-developers.com/showthread.php?t=1959657
Features:
Improved performance
Improved battery life
Improved network speeds
Improved boot times
Smoother scrolling
Better responsiveness
Cleaner file systems
Governor tweaks for amazing speed and performance without sacrificing battery life
Improved Memory and Ram tweaks
Improved Internet speed
Amazing kernel tweaks, build.prop mods, init.d scripts and more!
TUTS
[GUIDE] PARANOIDANDROID:JB
http://forum.xda-developers.com/showthread.php?t=1863547
Project Rookie How to build ROMS
http://forum.xda-developers.com/showthread.php?t=1798056
Guide how to compile and install CM10 for i9300
http://forum.xda-developers.com/showthread.php?t=1946481
TUT Building your first kernel
http://forum.xda-developers.com/showthread.php?t=1748297
Thanks to everyone who has helped this rookie put all this together
Dr4stic, thomas.raines, racing19969, and many others who i dont remember thanks everyone.
Warning: if you rooted your phone using the blaze recovery you need to use Odin and push our custom recovery tar file located below. make sure to uncheck repartion. if you push this with the blaze recovery it could cause issue's.
ok so d4astic cooked us up a CM 10 mod unofficial and our very own CMW recovery here are the links, and we need someone who can grab this and take over because d4astic doesnt have this phone and has a nightly on the blaze, so here you go everyone. I've taken over running the builds so....
,,,let the fun begin....
One more thing make sure you push the recovery first because the blaze one won't work with this rom
WARNING: if you brick your phone its not my fault i did this and it worked out fine just so you know
Also find this at this thread
http://forum.xda-developers.com/showthread.php?t=1730518
New Govs and U/V control brought to us by Thomas Raines and j3r3goss who dedicated his entire christmas break getting this to work for our phone. Also we know that at this time you cant control voltage with 3 rd party controls we are working on this so no need to tell us thanks
recovery cwm
cwm-6.0.1.4-exhilarate.tar - 6.92 MB
md5sum: f4f327659c35942ac8b5d08940b27efc
Cwm flash able zip
http://d-h.st/0KP
twrp 2.6
TWRP-2.6-Recovery-I577.zip - 7.67 MB
Official cm-10.2 thread
http://forum.xda-developers.com/showthread.php?p=45140599
official carbon rom by somcom
http://forum.xda-developers.com/showthread.php?t=2458690
official pacman by ink slinger
http://forum.xda-developers.com/showthread.php?t=2445143
4.3 is here hey guys so we skipped 4.2 and jumped right up to 4.3 due to efforts of many people
credits
j3r3goss
dr4stic
uberpeaguin
thomas raines
racing
somcom
teamchopsticks
meticulous(wifi-fix and several other things )
and of course yours truley
i know this list should be bigger and if you need to be on it because i missed you pm me and i will add you
i want to offer everyone on this list my heartfelt thanks from me and the rest of the i577 and blaze community without each and everyone of you we would still be stuck on 4.1 so thanks
4.3 moretz kernel source
thanks to these fine gentlemen
Team Chopsticks
CyanogenMod
Car vs Driver
elbermu
https://bitbucket.org/carvsdriver
moretz kernel oc to 1.5 ghz
flash from recovery and wipe caches
moretz_fixed_exhilarate.zip - 5.97 MB
4.3 roms
Liquid-JB-v3.0-UNOFFICIAL-exhilarate.zip - 115.52 MB
dirty unicorns all fixes included camera, torch, light sensor
du_exhilarate_2013-09-23.zip - 167.97 MB
beanstalk all fixes
BeanStalk-4.3.08-20130924-exhilarate.zip - 174.92 MB
pa_exhilarate-3.99-20130831.zip - 150.55 MB
i left out my slim build since meticulous has that under control there is a pac build in the thread by ink search for it its in the last 20 pages or so of the thread we are oficially supported by cm and team chopsticks and working on getting our own forum but xda seems to not be listening to me so all of you raise your voices and be heard by mods and anyone else who has a say in it i hope you enjoy my work this is the culmination of several months of time and energy and believe it or not i didnt even know what linux was when i started lol enjoy
old builds
4/25/13
SlimBean
Slim-3.1.0-i577-20130426-1514-UNOFFICIAL.zip - 80.51 MB
root box
5/6/13
fixed menu button and rom control
RootBox-JB-i577-Nightly-20130506.zip - 141.89 MB
http://d-h.st/3Nw
Remember with the LZ kernel if it hangs at boot let it sit for 10 minutes reboot and enjoy...
pacman LZ UPDATED 2/8/13
http://d-h.st/Afa
1/12/13
http://d-h.st/sjj
Paranoid Android: UPDATED 2/8/13
http://d-h.st/X5B
1/9/13
http://d-h.st/3AF
check this one out guys....
LiquidSmooth UPDATED 12/14/12
LZ:http://d-h.st/4z1
http://d-h.st/bqe. No LZ: NOT UPDATED
AOKP UPDATED revamped kernel
2/8/13
http://d-h.st/UEr
01/28/13
http://d-h.st/gg8
12/18/12
http://d-h.st/Wzb
rom and md5sum: cm10 sgh i577 exhilirate zip unofficial(Powered by LightningZap Kernel)
Cm10 updated 2/8/13
http://d-h.st/2Pd
UPDATED 1/9/13
http://d-h.st/4Hi
G-apps. JB
http://goo.im/gapps/gapps-jb-20121011-signed.zip
CM 9 stable unoficial build by dr4stic (At this time CM 9 does not have the lightning zap kernel)
so below is the folder where you will find the zip file for the cm9 build, make sure you get the md5 sum and compare it,please make sure you do a factory reset and wipe the dalvic cashe also, its under advance in the recovery
Now just in case you did not read from the top and just jumped down here; please push the recovery from the link above, if you do not do this you will have issues.
Thanks dr4stic for all your hard work, I'm going to post the ICS g-apps link . I hope everyone enjoys this as much as i do... With all that said .....enjoy....
CM9 unoficial rom with new kernel(updated by j3r3goss)
http://d-h.st/lNB
ICS G-APPS
http://db.tt/65fqUOcO
Ported ROMS
these roms were ported by InkSlinger420 they are not built from source but still very stable and a good expieriance
Credits
Avatar thanks for letting us post this here
the original thread can be found here
http://forum.xda-developers.com/showthread.php?t=2142130
Avatar Port
http://www.d-h.st/B4O
LiquidSmooth
Donation link for liquid smooth
http://bit.ly/Ruy2HF
thanks to Xwolf13 and the all star team for allowing us to port their work and post it for you guys the original thread can be found here
http://forum.xda-developers.com/showthread.php?t=2284763
Rom Port
http://d-h.st/RE5
i didnt do these ports guy so look up InkSlinger420 hit his thanks button and then go to the original thread and click the thanks button on the op post
this stuff takes alot of time and effort weather its a port or built from source so show them some love
thanks for posting it here... I will test it. Also you should post Gapps link. I have it.. but others might not and may flash the wrong Gapps.
This is NOT a rant...
These are some bugs I found so far.
1. Screen Orientation (Which OP mentioned)
2. While charging if you touch the power button It will black out and Hangs up (Pull battery and restart)
3. Camera sometimes having issues. (camera not found) but most of the time works perfect.
4. Call quality Low (Like all CM builds)
Rest everything seems to be very smooth. Google Now works without any issues.
I'm just writing this for information purpose only for those who like to use this build.
Thanks a lot to dr4stic for giving us this build.
Googler_1976 said:
These are some bugs I found so far.
1. Screen Orientation (Which OP mentioned)
2. While charging if you touch the power button It will black out and Hangs up (Pull battery and restart)
3. Camera sometimes having issues. (camera not found) but most of the time works perfect.
4. Call quality Low (Like all CM builds)
Rest everything seems to be very smooth. Google Now works without any issues.
I'm just writing this for information purpose only for those who like to use this build.
Thanks a lot to dr4stic for giving us this build.
Click to expand...
Click to collapse
Guys, turn off the notifications. The touchkey driver I used is the stock samsung one which doesn't have the BLN (button lights notifications) which CM is looking for. Whenever you get a message, or email, or really anything that would trigger a blinking LED, it's gonna crash the phone cuz the driver doesn't know how to handle it.
http://forum.xda-developers.com/showpost.php?p=32548093&postcount=108
dr4stic said:
Guys, turn off the notifications. The touchkey driver I used is the stock samsung one which doesn't have the BLN (button lights notifications) which CM is looking for. Whenever you get a message, or email, or really anything that would trigger a blinking LED, it's gonna crash the phone cuz the driver doesn't know how to handle it.
http://forum.xda-developers.com/showpost.php?p=32548093&postcount=108
Click to expand...
Click to collapse
BLN was never checked at-least on my phone. But its the screen rotation issue made me rollback to Stock ICS. I know you're very busy... but if you can guide me where to look into for that issue I will. Thanks again for ur hard work.
He needs a log cat run during the screen rotation and during start up so he can see what's going on. I don't know how to do this yet I've been looking into it but don't really know where to start. Do you know how to do this
Sent from my SAMSUNG-SGH-I577 using xda premium
Another thing that would be nice, the output of dmesg.
Just a brief explanation of what these things are. Logcat is basically the general android system logs as it boots up and runs. The dmesg is the log specifically of kernel messages as it boots up. This often includes details on drivers and potential errors there. ADB = android debug bridge, a way to connect to android, push and pull files, get a shell on the system, etc...
Install ADB drivers: If you've installed the drivers necessary to use Odin with your phone, it should include Samsung's ADB drivers for the phone. So I don't think you need to worry about that.
Install ADB: Not great, but not horrible ADB install tutorial
As for the phone itself, ADB is automatically enabled within recovery. When the phone is booted up as, you know... a phone... you'll want to go into Settings -> Developer Options, find "Android Debugging" and make sure it's turned on. That will enable ADB on android.
Now, some sample ADB commands to make your lives easier...
Check to make sure ADB sees your device (you should do this whenever you connect your phone to your computer, just to make sure you won't run into any errors with the commands below):
Code:
adb devices
Grab the output of dmesg (two versions, see it or redirect to a file.. you pick):
Code:
adb shell dmesg
or
adb shell dmesg > C:\name-of-some-text-file.txt
Grab the output of logcat (two versions, see it or redirect to a file.. you pick):
Code:
adb logcat
or
adb logcat > C:\name-of-some-text-file.txt
* NOTE: This will continue to grab output until either the system reboots or you hit CTRL+C on your keyboard. If you're just looking for the most recent messages, let it run for a few seconds and then CTRL+C it out.
Get a Linux shell on the system:
Code:
adb shell
Restart local ADB server (sometimes necessary... if you KNOW your phone is connected and ADB stopped recognizing it):
Code:
adb kill-server
Thanks guys!
I began setting a dB up on my comp last night I have java installed and started on the SDK but I fell asleep will work on it some more today. Now I'm going to read the links you posted and see if my research went in the right direction. One thing I will tell you is I've been spoiled by windows. Setting this up has given me flashbacks to the days of DOS. Lol
Thanks for the info and the time to point us in the right direction.
Sent from my SAMSUNG-SGH-I577 using xda premium
ktempleton said:
I began setting a dB up on my comp last night I have java installed and started on the SDK but I fell asleep will work on it some more today. Now I'm going to read the links you posted and see if my research went in the right direction. One thing I will tell you is I've been spoiled by windows. Setting this up has given me flashbacks to the days of DOS. Lol
Thanks for the info and the time to point us in the right direction.
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
Another easy way is install Droid Explorer (http://de.codeplex.com/) Power off phone when connected. then click on the logcat console button. It will open the command window and lines keep scrolling... Don't do anything till it completely boots. then Save the file (option on cmd window).
But i think the rotation issue is in the kernel so we might have to use the cmd line provided for that. U can use it in the same app.
Currently I'm back on ICS... So once I can't do it now. Today when I get some time I will re-install and run this.
Googler_1976 said:
But i think the rotation issue is in the kernel so we might have to use the cmd line provided for that. U can use it in the same app.
Click to expand...
Click to collapse
It probably is in the kernel. That's why I want the output of dmesg as well.
Incidently, it seems my initial kernel patch is winning some reviews and with any luck, I'll have it in the official cm kernel fairly soon now.
I did a search in the play Store for Log Cat, there are numerous apps in there for saving, sharing logcats, will these do the job? I certainly seems it would be much easier than ADB. Just curious.
dr4stic said:
It probably is in the kernel. That's why I want the output of dmesg as well.
Incidently, it seems my initial kernel patch is winning some reviews and with any luck, I'll have it in the official cm kernel fairly soon now.
Click to expand...
Click to collapse
So Is it basically same kernel for ur device and I577? if it is.. That's really cool.
---------- Post added at 07:42 PM ---------- Previous post was at 07:40 PM ----------
pegb856 said:
I did a search in the play Store for Log Cat, there are numerous apps in there for saving, sharing logcats, will these do the job? I certainly seems it would be much easier than ADB. Just curious.
Click to expand...
Click to collapse
I think most of them cant run booting up... ("I think is the keyword")
Googler_1976 said:
So Is it basically same kernel for ur device and I577? if it is.. That's really cool.
---------- Post added at 07:42 PM ---------- Previous post was at 07:40 PM ----------
I think most of them cant run booting up... ("I think is the keyword")
Click to expand...
Click to collapse
*I think* that makes sense and you are probably right.
dr4stic said:
Guys, turn off the notifications. The touchkey driver I used is the stock samsung one which doesn't have the BLN (button lights notifications) which CM is looking for. Whenever you get a message, or email, or really anything that would trigger a blinking LED, it's gonna crash the phone cuz the driver doesn't know how to handle it.
http://forum.xda-developers.com/showpost.php?p=32548093&postcount=108
Click to expand...
Click to collapse
Here is the Logcat... and Kernel Log
Well I'm all in. I was cleaning things up before loading everything up and accidentally deleted all my backups . Oh well, so far I'm loving this. Hope it's good to go for a daily or I'll be setting up a new ICS install too.
I could always upload one of my ICS backups to drop box for you if it comes down to that
Sent from my SAMSUNG-SGH-I577 using xda premium
ktempleton said:
I could always upload one of my ICS backups to drop box for you if it comes down to that
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
Not a big deal. So far not having any issues other than rotate bug. Even notifications are working ok. I did turn off some notification light setting and I thought I saw something about softkey flash notification, but I couldn't find it again. Take me a bit to get used to the menu structure.
Everything is pretty smooth as of right now.
Unfortunately my phone randomly shut down twice today and I ended up going back to ICS for now. The first time I had foursquare open but had laid it down since the light changed and when I picked it up it was off, the second time it was just laying on the desk and when I picked it up it was off again. I did back it up before restoring ICS though. I've got a lot going on the next couple days and need a dependable device.
I might restore back to CM 10 and tinker with it when I'm not expecting phone calls.
pegb856 said:
Unfortunately my phone randomly shut down twice today and I ended up going back to ICS for now. The first time I had foursquare open but had laid it down since the light changed and when I picked it up it was off, the second time it was just laying on the desk and when I picked it up it was off again. I did back it up before restoring ICS though. I've got a lot going on the next couple days and need a dependable device.
I might restore back to CM 10 and tinker with it when I'm not expecting phone calls.
Click to expand...
Click to collapse
Same here after i provided the logs. The phone was lying and when i checked it was shutdown.
.
We were having similar problems on the blaze end. Most of them seem to be getting worked out pretty quickly so I'm fairly confident you guys should be seeing some problems fixed soon too.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 11.0 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
Download: http://goo.im/gapps (use latest kk gapps)
Mirror: http://download.crpalmer.org/downloads/gapps/
Useful Links
Unofficial changelog
Picassowifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 11.0 for Tab Pro 10.1 PicassoWiFi, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
Version Information
Status: Stable
Created 2014-09-26
Last Updated 2014-09-25
Reserved
Reserved
@crpalmer, let me be the first to congratulate you on this! It's amazing how we have official CM support now!
Thank you very much!
Congrats again on your hard work paying off, and making it into AP. http://www.androidpolice.com/2014/0...-extended-to-the-samsung-galaxy-tab-pro-10-1/
Nice work. Think I'm about ready to do my first flash. . :good:
Congratulations on being official
It's with great interest I have followed the development of your T-520 version of the cm11, even though I don't have one myself. Why? Firstly, I'm amazed by the short time frame in which you actually accomplished this, and conquered the Exynos SoC. But, I'm also A proud owner of a T-900, and from what I can tell there is only the screen size that differs the T-520 from the T-900. In my mind, it should be feasible to port, though I might be wrong.... Maybe, you have some ideas of how to correct/evolve Shaheen's port of your ROM. Who knows, maybe at this point you're bored and need a new challenge, as the major obstacle is breached and, before the work with Android L begins... Besides, neither Shaheen, nor you own a T-900, why this should be a very simple task:laugh:
The current error report is as follows:
arcadia2uk said:
Thanks for reviving this one Shaheer,
After some problems in getting the full ROM onto the drive (all on my side), I finally got it up and working. The ROM is a lot snappier that prior versions, and is stable over all. Below is my summary of working/non-working functions. Additionally, with the all new TWRP 2.8.0.0, see post #55, the format of system and cache are instant, why ROM testing is a breeze.
I have noticed the following issues:
- WiFi connects, but loses password on reboot, same issue as earlier build
- Bluetooth: devices are seen, but do not connect - Error message: Can't connect
- External SD is not detected by device - see post #54, below, for more detailed info
- mtp - device does not mount on PC
- adb - device does not mount on PC
- Camera is broken - Error message
- Torch is broken - Error message
- Lid sensor - No reaction
- Capacitive lights - No reaction
- Sensors - No reaction
- IR blaster - No reaction
- Offmode charging - but it will not work on the picasso-wifi either, at least until tomorrow, 20140926
- Home button doesn't work correctly. It wakes up the device, but does not go to the home-screen
- Battery drain is significant - However, it might be my impression from heavy use of the screen while testing
Only two outstanding items (non-tested) from the list Shaheer posted below. I would appreciate if someone would test them and confirm if they are working, or not:
- Miracast displays - Most likely functional, given that the Chromecast dongle is working | Best Guess: yes
- Google Play Movies: downloading a video and then playing the downloaded copy. Apparently, crpalmer has received a CyanogenMod commit and the issue is fixed as of now, 20140925 | Best Guess: No
Click to expand...
Click to collapse
Anyhow, we (T-900 owners) would really appreciate your input, and I believe speaking for Shaheer as well, and to tap into your substantial knowledge and experience.
Once again, I'm really impressed by your accomplishments, and I sincerely congratulate you to the well deserved status as an officially recognized cm-developer.
Finally, if a tester is needed, I'll be around.
Thanks in advance.
Congrats! I appreciate your hard and nice work. Thanks :good:
I am so thrilled to see official CM support for Galaxy Tab PRO 10.1. Ordered mine couple of days.. and still in transit. They day I ordered.. I am thinking how will i live with touchwhiz..
I guess now i don't have to worry.. will root and flash right away once its here. Looks like everything is working. I don't care about small bugs if battery life is as good as stock
Thanks again
Good work !
I am on GraveD stock ROM, running very well for a month.
But I plan to try CM11 asap.
Sent from my SM-T520 using XDA Free mobile app
Subscribed in hopes this will trickle back to klimtwifi (Tab S with Exynos 5420)
Wow, thanks for the great news @crpalmer!
WiFi easy fix
sorry wrong thread
@crpalmer,
I followed the instructions "How To Build CyanogenMod Android for Samsung Galaxy Tab Pro 10.1 Wi-Fi ("picassowifi")" (http://wiki.cyanogenmod.org/w/Build_for_picassowifi).
I faced issues with drmserver and gpsd on extract-files.sh : "Permission Denied"
I managed this by copying them to internal memory and them adb pull to their destination locations.
It's compiling now...
Which ir app are you guys using? I can't find one that works.
If you want to disable the soft buttons and use the on-screen buttons (I use the tablet a lot in portrait mode and the soft buttons get in the way all the time).
1. Enable soft keys : edit the /system/build.prop file to include the following line qemu.hw.mainkeys=0
2. Disable the soft keys : edit the system/usr/keylayout/sec_touchscreen.kl file and add # in front of the two lines
3. Turn buttons light off : go to settings -> buttons and disable backlight
4. Reboot
I don't think it was posted all in one place before.
cviniciusm said:
@crpalmer,
I followed the instructions "How To Build CyanogenMod Android for Samsung Galaxy Tab Pro 10.1 Wi-Fi ("picassowifi")" (http://wiki.cyanogenmod.org/w/Build_for_picassowifi).
I faced issues with drmserver and gpsd on extract-files.sh : "Permission Denied"
I managed this by copying them to internal memory and them adb pull to their destination locations.
It's compiling now...
Click to expand...
Click to collapse
Hmmmm. That's a good one. Very few vendor blobs tend to have restricted read permissions but apparently we hit two of them. I assume that it was actually drmserver.samsung though right? That's important if your build is going to have working DRM.
I made myself a note to figure out how to make that work better and/or document it better.
FYI, you can also download an existing build, unzip that file somewhere, and then run
./extract-files.sh /path-that-you-unznipped-to/
and it will pull all the files from that unzipped directory.
burnski said:
Which ir app are you guys using? I can't find one that works.
Click to expand...
Click to collapse
I currently like Smart IR Remote. It's not free but they seem to be good people and I appreciate that.
crpalmer said:
Hmmmm. That's a good one. Very few vendor blobs tend to have restricted read permissions but apparently we hit two of them. I assume that it was actually drmserver.samsung though right? That's important if your build is going to have working DRM.
I made myself a note to figure out how to make that work better and/or document it better.
FYI, you can also download an existing build, unzip that file somewhere, and then run
./extract-files.sh /path-that-you-unznipped-to/
and it will pull all the files from that unzipped directory.
Click to expand...
Click to collapse
Hello,
Thanks.
Unfortunately, I need more RAM, only 2 GB RAM and 2 GB Swap don't fit the load.
crpalmer said:
I currently like Smart IR Remote. It's not free but they seem to be good people and I appreciate that.
Click to expand...
Click to collapse
Cool thanks I'll check it out
Did you get Infra Red ever to work? I use Touchsquid and it always worked with every ROM i tried.
But in CM11 it looks like it is broken. Maybe I am too impatient and i should wait a bit for CM to get IR working and go back to GraveD's ROM for a while.
Thanks for the hard work crpalmer!
Code:
Code:
/*
* Your probably long expired warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
* and point my finger right back at you.
*/
Installation Instructions
Make sure you have a second partition on your SD card before flashing!!!! This can be created with minitool partition wizard on Windows or gparted on Linux.
If on a BML rom (stock-based GB)...
0. Read "Things to take note of" below
1. Reboot to recovery
2. Make sure your version of CWM is at least 5.x
3. Install zip. It will reboot a couple of times, don't be worried.
4. If you want root or Gapps, flash them now
If on an MTD rom (CM7 and all ICS+)(I tested CM9, CM10.1 and CM11)...
0. Read "Things to take note of" below
1. Reboot to recovery
2. Wipe data, and cache paritions (just in case). If updating to a newer build, you can probably skip this step
3. Install zip
4. If you want root or Gapps, install them now
The first boot can take several minutes. Be patient. If it takes 10+ minutes, pull the battery and reboot to recovery.
Things to Take Note Of
Humberos (the i9000 maintainer) has moved on to different projects which means no first-gen Galaxy S devices are being actively maintained. Builds may break at any time!
I actually have a T959P, not a T959V... It was released by Telus in Canada. It is a very similar device (I can run ROMs for the T959V with limited problems - ie sometimes I get wakelocks and the gps never works), it has a different GPS chipset and also uses different cell bands (but I can still use your guys modems but I lose access to the 850Mhz band). I have created a build specifically for the T959V as best as I can guess and also provide T959P builds.
The USB connection is MTP and not mass storage as Omni has removed mass storage. In recovery there is still an option to mount as mass storage device.
This build is very close to the official omni source code. This means that the recovery is TWRP and there aren't any added "features"
In order to get it rooted, you need to install SuperSu.
Gapps reportedly slow down the device significantly so tread carefully.
Backup Backup Backup! I'm not responsible for you losing any data.
Working
Taking pictures
RIL
SMS
Data
Recovery
Bluetooth
Wifi
Vibration
Powered-off charging animation
Flash from BML
Video Recording
Automatic Brightness
Moving Apps to the SD Card
GPS
Encryption
Compass
SElinux in enforcing mode
What probably doesn't
Microphone mute option doesn't work during calls
What doesn't
720p recording is very laggy
What's been removed
TV-Out - It was removed upstream plus I think binary blobs are broken in Lollipop...
Live wallpapers - this is a low-ram device
Everything else is not tested!!!
XDA:DevDB Information
Unofficial OmniRom 5.1 for the Galaxy S 4G (T959V) and Galaxy S Fascinate 4G (T959P), ROM for the Samsung Galaxy S 4G
Contributors
xc-racer99, humberos
Source Code: http://github.com/omnirom
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: All
Based On: OmniRom
Version Information
Status: No Longer Updated
Created 2015-06-30
Last Updated 2016-05-12
Thanks Time!
This would not have been possible without the following people:
Thanks to humberos for bringing Lollipop to the first-gen Galaxy S series. This would not have been possible without his work.
Thanks to FB and Dao for their work on the CM-11 device tree. I used several of their fixes.
Thanks to noiphonehere for his device trees and kernel, most of my work was based off of his.
Thanks to bhundven and the other members of teamacid for their work on the aries kernel.
Thanks to all others that have helped get this phone to where it is today!
Thanks to vcmerritt. A name you're probably not familiar with, but he was the only one to create something for the T959P and without him I'd still be on stock...
Build your own!
Follow the instructions at http://docs.omnirom.org/Setting_Up_A_Compile_Environment using the android-5.1 branch
Before doing a repo sync, put the galaxy_s_series.xml file from the Download folder in .repo/local_manifests folder of the source tree.
After syncing the source, open a terminal and in the directory where you downloaded the source code type "source ./build/envsetup.sh" and then "brunch galaxys4gmtd"
Changelog
Changelog for 07/03/2015 Build
Newer Omni source
Added volume controls and flight mode toggle to power button menu
Added Bigmem option. This increases available RAM by ~20mb but breaks 720p video recording. Humberos created the kernel setup and I integrated a toggle for it into Advanced device settings.
Selinux is now in enforcing mode. I had to modify the GPS startup to have any chance of getting here. Please let me know if it still works/doesn't work/never worked
Notifications are sometimes wonky. To fix, in Settings, go to Performance, then Advanced. Select Force high-end graphics and reboot your phone.
Changelog for 2015/07/20 Build
The data partition is now the second partition of the SD Card as opposed to internal storage
Gapps now work. If you get error 461 when installing from Play Store, a full data wipe should fix it. You can try experimenting with clearing data for the Play Store and/or Play Services or removing and re-adding your Google account if you don't want to do a full data wipe.
HSPA vs UMTS settings in DeviceSettings has been fixed
High-End graphics are forced by default to fix notification issue
ART parameters have been tweaked
Miscellaneous other tweaks, see my Github for details
Changelog for 2015/07/24 Build
Stabilized bluetooth connection
Fixed typo in GPS initialization. Does it work?
Added ability to use f2fs file system on /data. Supposed to give better performance
Added force fast charge and touch wake to kernel. Touchwake is accessible through its sysfs path, fast charge through Performance Settings, BatterySelinux currently denies these requests...
Changelog for the 2015/07/29 Build
This is a maintenance build. Very little has changed
Some more RAM freed (disabled some debugging stuff, TV-Out driver, IR driver)
Sepolicy updated for fast charge and touch wake
GPS initialization tweaked - unsure if works. If it doesn't, a dmesg would be appreciated
Changelog for 2015/08/02 Build
SElinux changed to permissive - this build only
GPS sepolicy changed - unsure if all necessary things are implemented
Changelog for 2015/08/13 Build
Selinux back to enforcing. Thanks to @anoymonos for the dmesg and @DerPugNa for offering to send me one as well
Fixed encryption
Changelog for 2015/08/31 Build
Updated Android version (5.1.1_r5 to 5.1.1_r12)(upstream Omni Change)
Restoring /system in TWRP should now work
When installing from BML, a chance is given to install gapps and/or SuperSu before rebooting
zRam is now actually used...
Changelog for 15/10/2015 Build
Fixed typo in updater.sh (thanks @FBis251!)
Update Omni source code - plenty of little tweaks since last build
Source Code and Downloads
Main Source
http://github.com/omnirom
Device Specific Source Code
http://github.com/xc-racer99/android_device_samsung_telusgalaxys4gmtd for the device tree (see android-5.1-t959v branch)
http://github.com/xc-racer99/android_device_samsung_aries-common for the common device tree (see android-5.1 branch)
http://github.com/xc-racer99/android_kernel_samsung_aries for the kernel (see android-5.1 branch)
http://github.com/xc-racer99/proprietary_vendor_samsung for the prop blobs (see android-5.1 branch)
Downloads!
All builds are found at https://drive.google.com/folderview...VVSzJxYVU3eHlWZGR1VVNZUWk1V1QzOUk&usp=sharing
Please let me know if the link doesn't work! There are also builds there for the T959P, in case there are any users of it left.
Gapps
Gapps do not work on builds prior to 2015/07/20. On more recent builds, they can be installed from http://forum.xda-developers.com/showpost.php?p=59731008&postcount=2
SuperSu
SuperSu can be found at https://download.chainfire.eu/696/SuperSU/
Thanks thanks ....
Awesome work @xc-racer99!
Wow, bringing this ole device back from a coma here. Nice to see someone else willing to work on lollipop for this oldie but goodie. Keep this device alive man.
Edit: If you are in need for some GFX for this thread, let me know and I'll see what I can brew up for you.
GFX.myst. said:
Wow, bringing this ole device back from a coma here. Nice to see someone else willing to work on lollipop for this oldie but goodie. Keep this device alive man.
Edit: If you are in need for some GFX for this thread, let me know and I'll see what I can brew up for you.
Click to expand...
Click to collapse
I hope I can keep this great little device going a little longer, however it will probably get tough. I did a repo sync earlier today and things are starting to break. The last few builds haven't even booted. With humberos no longer maintaining the i9000 and aries-common, I've had to fork the aries-common repository to try to keep going. The only upside of this is that I now have a little bit more freedom and can add things in if I want to.
Thanks for the offer of the graphics. If I can get a new build working, then I'll probably take you up on your offer. I think I've traced the problem but I'll have to wait and see...
For anyone that is trying/has tried this out, I'd be very curious on the status of the GPS on the T959V. I'm interested in creating the sepolicies for it so we can put selinux into enforcing mode but I don't want to go to the effort if it doesn't even work right now.
I've downloaded the zip and one of the smaller Gapps packages...won't be able to flash until early next week...I'll be out of town...will post results later...thanks for keeping this phone current.
New Build Uploaded!
Download is still at the same link as before, just use the 2015-07-03 build
I managed to find out why my new builds hadn't been booting - it was because the syntax for using a custom kernel toolchain had changed.
Anyway...
Changelog for 07/03/2015 Build
Newer Omni source
Added volume controls and flight mode toggle to power button menu
Added Bigmem option. This increases available RAM by ~20mb but breaks 720p video recording. Humberos created the kernel setup and I integrated a toggle for it into Advanced device settings.
Selinux is now in enforcing mode. I had to modify the GPS startup to have any chance of getting here. Please let me know if it still works/doesn't work/never worked
On another note, I've had a look at re-implementing TV-Out support. It doesn't look promising as several of the functions in the android frameworks that it used have been tweaked.... Still working on it but don't hold your breath.
Also, if somebody could test dock audio that would be appreciated. I don't have any way of testing it. If it doesn't work, I do have an idea on how to fix it (for those interested, another almost-aries device, the Infuse 4G, had to modify things slightly to get it to work. I would try to emulate their solution).
Omg download nowwww....thanks my friend
Alright, I'm having some issues on the latest build with notifications and the lockscreen. I'm still working on tracing down the reason for the problem...
DickyG said:
I've downloaded the zip and one of the smaller Gapps packages...won't be able to flash until early next week...I'll be out of town...will post results later...thanks for keeping this phone current.
Click to expand...
Click to collapse
Hello, im a user of a t959v. And I've been using this rom for three days. Everything is fine and very smooth on this rom except that, I can't install anything from the playstore. I always get (cannot install app due to an error 963). And Ive tried all the gapps, even the new link provided but still no luck.
billowusu47 said:
Hello, im a user of a t959v. And I've been using this rom for three days. Everything is fine and very smooth on this rom except that, I can't install anything from the playstore. I always get (cannot install app due to an error 963). And Ive tried all the gapps, even the new link provided but still no luck.
Click to expand...
Click to collapse
Good to hear that that's its (mostly) been working for you. I was hoping that the gapps problem was just me
Out of curiosity, which of the alternate gapps did you try?
A brief google of the error brings up a couple of possibilities...
Try an older gapps version. The ones from devloz on the i9000 thread devloz and the oldest revision for 5.1.1 are probably your best bet. Please be aware that Google Play store will automatically update!!! In order to prevent this, you will need to create a folder called "com.android.vending-1.apk" in /data/app (use a root explorer such as ES File Explorer or adb if you know how). If a file with that name already exists, delete it first.
Another thing to try would be to unmount your sdcard first before trying to install an app. I know, its a terrible work-around but it should work. This is because the error is that Google Play is trying to save some data on your sdcard but then for some reason it fails (I'm not sure why).
I'll hopefully get around to seeing if its a permissions problem after I find out what's been causing the issue with the notifications on the latest build.
P.S. Does the GPS work?
Early update...
...ROM flashed fine...a little slow to boot...about 3 minutes...but it booted.
...Gapps flashed fine...used 20150513_5.1.x package
...Installed Super SU (although I don't think that's necessary) and TB.
...So far only gave a quick test to camera and web browser...no problems.
...Am now in the process of re-installing user apps and data from TB...this will take a while.
When I'm done with that, I use Link2SD to link most of my user files to the SD card. After that is all set up, I'll test stuff like GPS, root access, etc. I'll post back later...maybe tomorrow.
But so far so good.
OK...I did some testing tonight and here's some results.
Working:
.it boots
.root
.browser
.playstore
.camera
.link2sd (about 180 mb free in internal)
.camera
.wifi
.email
Nor working:
.bluetooth
.google search/voice search
.just about all the rest of the Gapps
.tons of force closes including Maps so can't test GPS
Won't be able to do anymore testing until next week.
DickyG said:
OK...I did some testing tonight and here's some results.
Working:
.it boots
.root
.browser
.playstore
.camera
.link2sd (about 180 mb free in internal)
.camera
.wifi
.email
Nor working:
.bluetooth
.google search/voice search
.just about all the rest of the Gapps
.tons of force closes including Maps so can't test GPS
Won't be able to do anymore testing until next week.
Click to expand...
Click to collapse
Alright, thanks very much for the update. I'll do some more testing here and see if I can solve anything. For me, bluetooth file transfers to the phone work but not from the phone.
I've been looking at the notification "error" where the lockscreen notifications do not appear correctly. It appears to have been introduced upstream with a merge. I'm having difficulty finding out exactly what changed and since no errors are being thrown in the logcat, it could be a while...
For testing the GPS, there's an app from the Play Store called GPS Test which does a nice job of showing satellites and whether or not you have a lock on them.
you're the man!
nice one! its nice that this device are still alive.! and now were on 5.1
DerPuGNa said:
nice one! its nice that this device are still alive.! and now were on 5.1
Click to expand...
Click to collapse
No, it should be Humberos is the man! I basically re-hashed his code for the i9000 and used bits and pieces from people like Bhundven, noiphonehere, maxfierke, Dao, and FB to get things to work properly.
For a status update, I figured out the lockscreen notification problem. I have a new build being made that I hopefully will be able to upload in the next couple of days (internet dependent). TV-Out looks totally broken as the proprietary blobs no longer function. I don't have the know-how to make ugly hacks to get them to work. The new build will have SElinux in enforcing mode and have the different GPS initialization (like the last build) until someone tells me that it doesn't work
Uh-oh, looks like I jumped the gun.... Having problems once again
Any updates on getting the play store to work? I have searched, downloaded, and tried every gapp made for 5.1. I found that I can load any app on the rom, if I get the APK version of it.
AgainstTheFlow said:
Any updates on getting the play store to work? I have searched, downloaded, and tried every gapp made for 5.1. I found that I can load any app on the rom, if I get the APK version of it.
Click to expand...
Click to collapse
Darn, so its still not working. Not surprising. I've been struggling on the notification issue and am at my wit's end as to what the problem is. I don't think its only our phone as several i9000 users have been reporting it as well. Whether it is only the first-gen Galaxy S series that is having the problem or not is anyone's guess. My programming skills are insufficient to fix the issue!
I'll have another look at gapps over the next couple of days and see if I can figure out a combination that works 100% of the time.
I'm assuming the error message is still 963 or does it silently fail now? Its probably related to the fact that we have only an external sd card and no internal sd card like most devices...
All the problems with the notifications that I've found are:
Only one notification will show up at a time
Large notifications such as the music player do not render properly. They are cut off at the normal notification size and occasionally it seems as if there are two layers there (one for the small version, one for the bigger version) (see attached picture, taken with VLC as the media player, but also appears with Apollo)
Notifications don't always show up. A little icon appears in the top left corner of the status bar but no notification is present. Seems hit or miss
The words No notifications appears in the lockscreen just above the clock when there are no notifications. Otherwise, a notification (and only one) which can't be clicked covers part of the clock