Rings Extended - Can't select OK - Nexus 5 Q&A, Help & Troubleshooting

Does anyone else have issues with Rings Extended? I can't seem to select OK after selecting a file. Cancel button works still, but pressing on OK has no visual feedback nor any action. Tried on gf's Nexus 4 with KitKat and it works fine. I've tried on different roms on my Nexus 5 and it is not working properly.

Bump anyone?

Aria807 said:
Bump anyone?
Click to expand...
Click to collapse
If you are using any kind of screen filter, turn it off.

URPREY said:
If you are using any kind of screen filter, turn it off.
Click to expand...
Click to collapse
Oh my thanks! Totally did not think about that. I am using Lux. I guess that was the issue.

Related

The Nexus S isn't really a phone to phone :(

I don't know if it is my fault, but the screen doesn't stay black until phoning, so i always hit the "mute", "hang up" or "hold" button on the screen with my face, very annoying.
any suggestions?
J don't this problem, what cm you running
Sent from my Nexus S using XDA App
bringonblink said:
J don't this problem, what cm you running
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Kernel: Netarchy 1.3.0.8a for 2.3.3
ROM: NSCollab #21
Does it happen with 1.3.0.2 kernel?
does this happen when you were stock?
Sent from my Nexus S
Matridom said:
does this happen when you were stock?
Sent from my Nexus S
Click to expand...
Click to collapse
i were on stock for about 10min
yes, it also happend with 1.3.0.2
CM 7.0.1 was said to have a proximity sensor bug, I wonder if the ROM you are using is related to this? I don't know much about the ROM you are using though, so I might be talking non-sense.
Si_NZ said:
CM 7.0.1 was said to have a proximity sensor bug, I wonder if the ROM you are using is related to this? I don't know much about the ROM you are using though, so I might be talking non-sense.
Click to expand...
Click to collapse
EDIT
hes on NScollab which i believe is nightly 40, either way im on nscollab too and dont have this problem :/
eiabea said:
i were on stock for about 10min
yes, it also happend with 1.3.0.2
Click to expand...
Click to collapse
So your problem could be the ROM you are using.
Try stock.
Alternatively you could have a bum phone (bad proximity sensor)
Sent from my Nexus S
Matridom said:
So your problem could be the ROM you are using.
Try stock.
Alternatively you could have a bum phone (bad proximity sensor)
Sent from my Nexus S
Click to expand...
Click to collapse
I have the same ROM as him and do not have this problem
bringonblink said:
I have the same ROM as him and do not have this problem
Click to expand...
Click to collapse
so it is a hardware problem??? please say no, cause samsung already ****ed me up because my phone is rooted xD
eiabea said:
so it is a hardware problem??? please say no, cause samsung already ****ed me up because my phone is rooted xD
Click to expand...
Click to collapse
I honestly think its either a bad flash or you might of accidentally messed with the setting. Go to the dialer and while on the dialer press the menu key and you should see a list of settings. Scroll down until you see the setting about screen time out while on a call.
Sent from my Nexus S using XDA Premium App
OuncE718 said:
I honestly think its either a bad flash or you might of accidentally messed with the setting. Go to the dialer and while on the dialer press the menu key and you should see a list of settings. Scroll down until you see the setting about screen time out while on a call.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
when i go to the dialer and tap the menu button and select settings, i get a settingmenu, but the headline is "contact" the subheadline is "telephone" normal?
i just have two settings under the normal settings and "call settings" which could have something to do with the screenproblem and that are (sry i translate them german ^^) "always approach sensor" (on) and "screen always on" (off)

[Q] Anyone else cannot confirm OK with PackageInstaller ?

No idea if this is a ICS custom rom thing, but I remember it happened on stock as well.
When trying to install an .apk from sdcard (sideloading), I get the PackageInstaller confirmation window. Sometimes the right side where the OK button is, is non responsive (left side on Cancel can be clicked). After some trying, it works. Now, I have no idea what causes this, but it's ****ing annoying and seriously makes me want to throw the phone up the wall.
Anyone else noticed this ?
Did you enable installation from Unknown sources?
kοng said:
Did you enable installation from Unknown sources?
Click to expand...
Click to collapse
Um, yeah, the issue is in the Package Installer, I wouldn't even get to it, if I hadn't enable that.
That happens to me if I have the app Screen Filter enabled/on.
Sent from my Nexus S 4G using Tapatalk
kyouko said:
That happens to me if I have the app Screen Filter enabled/on.
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Hm, I've got Lux installed (manages lowest auto-brightness setting, because stock ICS is too dim). Perhaps that could be the issue. I'll try it out, thanks
madd0g said:
Hm, I've got Lux installed (manages lowest auto-brightness setting, because stock ICS is too dim). Perhaps that could be the issue. I'll try it out, thanks
Click to expand...
Click to collapse
I'm the developer of Lux. PackageInstaller shouldn't have any issues with Lux installed provided you haven't turned off 'compatibility mode' in settings.
kyouko said:
That happens to me if I have the app Screen Filter enabled/on.
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Oh man, you're a genius. I've had this problem time and time again and always wondered what it could be. I've ran around the problem using a "silent" installer.
Cyb3rGlitch said:
I'm the developer of Lux. PackageInstaller shouldn't have any issues with Lux installed provided you haven't turned off 'compatibility mode' in settings.
Click to expand...
Click to collapse
I tried uninstalling Lux and responsiveness was suddenly back, it recognized the touch everytime.
Compatibility is on -> screenshots
When I restored Lux back again, the responsiveness went back to nonconsistant, sometimes it works fine, mostly it ignores the touch.
polobunny said:
Oh man, you're a genius. I've had this problem time and time again and always wondered what it could be. I've ran around the problem using a "silent" installer.
Click to expand...
Click to collapse
Haha you're welcome. It drove me absolutely crazy] trying to figure that out with my old Hero
Sent from my Nexus S 4G using Tapatalk
kyouko said:
Haha you're welcome. It drove me absolutely crazy] trying to figure that out with my old Hero
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Seems like some kind of Android protection to disable side loading lol, when an app with certain "screen manipulation" functionality is running
madd0g said:
Seems like some kind of Android protection to disable side loading lol, when an app with certain "screen manipulation" functionality is running
Click to expand...
Click to collapse
As you said I believe that's the case so you don't install malware thinking you're installing something else. Click hijacking isn't cool, kids!
madd0g said:
I tried uninstalling Lux and responsiveness was suddenly back, it recognized the touch everytime.
Compatibility is on -> screenshots
When I restored Lux back again, the responsiveness went back to nonconsistant, sometimes it works fine, mostly it ignores the touch.
Click to expand...
Click to collapse
You might have to wait a couple of seconds before Lux disables itself. Lux needs to poll to check the current foreground app and disable itself. It polls every 3 seconds, unless it has detected the same app a few times in a row, in which it slows polling down to 9 seconds.
Cyb3rGlitch said:
You might have to wait a couple of seconds before Lux disables itself. Lux needs to poll to check the current foreground app and disable itself. It polls every 3 seconds, unless it has detected the same app a few times in a row, in which it slows polling down to 9 seconds.
Click to expand...
Click to collapse
I see, maybe I was trying to hit the OK too fast, because now it seems that it works after waiting couple seconds. Thanks.
madd0g said:
I see, maybe I was trying to hit the OK too fast, because now it seems that it works after waiting couple seconds. Thanks.
Click to expand...
Click to collapse
No problem. I wish there was a cleaner solution, but alas the Android API doesn't provide an intent which warns apps that a secure view is being shown.
Really Android should be drawing secure fields above everything else, rather than disabling the view - whoever thought that was a good idea isn't very intelligent.

Awesome app, must try! Gravity Screen Off

https://play.google.com/store/apps/details?id=com.plexnor.gravityscreenofffree
This app uses your phone's motion, gravity, and proximity sensors to automatically turn on and off your screen so that you don't have to press any keys (software or hardware).
For instance, when I put my S4 inside my pocket or holster it to my belt clip, the screen turns off automatically. When I take the phone out, the screen turns on automatically as well.
I've tried a few apps similar to this before but this one just works very well and consistently.
I already installed it on my mom's and wifey's S2s and they love it too~! Just wanted to share the goodness~
Wow it is pretty impressive! Thanks for sharing. .
Sent from my SPH-L720 using xda app-developers app
sprint_dobbs said:
Wow it is pretty impressive! Thanks for sharing. .
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
No problem. I figured there must be others who will find this kind of app convenient to have around. I just love not having to press the home or power button every time I want to turn the screen on.
Any hit on battery performance?
vboyz103 said:
Any hit on battery performance?
Click to expand...
Click to collapse
The author of the app said to expect a hit about 5%. I've been using it for 2 days now and I haven't noticed any difference so far. But then, I'm running on the ktoonsez kernel with -50mV, all-around.
Freekin love this app
Thanks for the heads up op! works like a charm, now I've got to get used to not pressing my power key on wake
****'ll Buff Out
Sweet app....I noticed I had to lower the sensitivity while my phone was in my mount while driving. The screen kept coming on.
Nice catch. Love this app.
This is exactly what I was looking for!! Thanks for the find!
Sent from my SPH-L720 using xda premium
Very nice find, bought the pro version right away, this is awesome but does anyone knows if there's something you can do so when you put your phone face up on the table it lock it without waiting 5 secs?
Sent from my SPH-L720 using Tapatalk 4 Beta
K nvm Im getting screen off a lot while using the phone in different positions, I tried changing some settings but nothing I had to turn it off it was getting extremely annoying
Sent from my SPH-L720 using Tapatalk 4 Beta
Rasmux said:
K nvm Im getting screen off a lot while using the phone in different positions, I tried changing some settings but nothing I had to turn it off it was getting extremely annoying
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The only time the screen turns off on me when I don't want it to is when I text and I accidentally rest one of my fingers over the proximity sensor by mistake. Otherwise, it's been good. I wish there was a time-delay option for proximity sensor to turn off the screen so an accidental finger covering up the proximity sensor doesn't turn off the screen right away.
optimummind said:
The only time the screen turns off on me when I don't want it to is when I text and I accidentally rest one of my fingers over the proximity sensor by mistake. Otherwise, it's been good. I wish there was a time-delay option for proximity sensor to turn off the screen so an accidental finger covering up the proximity sensor doesn't turn off the screen right away.
Click to expand...
Click to collapse
Yeah well actually here it happens when im gaming which I hold the device horizontal
Sent from my SPH-L720 using Tapatalk 4 Beta
Rasmux said:
Yeah well actually here it happens when im gaming which I hold the device horizontal
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I see. It's an extra step but you could pull down the notification menu and pause the app before gaming then turn it back on afterwards. My mom tells me that sometimes when she's watching Netflix, the screen turns off on her. I told her not to cover up the sensor but she just disabled the app.
optimummind said:
I see. It's an extra step but you could pull down the notification menu and pause the app before gaming then turn it back on afterwards. My mom tells me that sometimes when she's watching Netflix, the screen turns off on her. I told her not to cover up the sensor but she just disabled the app.
Click to expand...
Click to collapse
Could you take a screenshot of your settings? Maybe im ****ing up somewhere lol
Sent from my SPH-L720 using Tapatalk 4 Beta
I got a wakelock after enabling this. just me?
gershee said:
I got a wakelock after enabling this. just me?
Click to expand...
Click to collapse
No. I got 4x for 16 seconds in 12 hours. But for as awesome as this app is I can live with a 5% hit any day!!
Sent from my SPH-L720 using xda premium
:victory:
Thanks! This fits the bill, the other drivers on the road thanks you too!
According to GSam battery monitor, Gravity Screen Off is responsible for only 0.2% battery drain. I haven't noticed any extra drain because of this app.

Light flow HELP ME

Why am I having so much trouble getting light flow to work? I just had it working fine on my galaxy Nexus so I definitely know how to set it up but no matter what I do it won't work.
Are there any special settings I need to turn on or off?
Sent from my Nexus 5 using Tapatalk
cc16177 said:
Why am I having so much trouble getting light flow to work? I just had it working fine on my galaxy Nexus so I definitely know how to set it up but no matter what I do it won't work.
Are there any special settings I need to turn on or off?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Make sure Light flow is checked in accessibility settings. So currently, having an "always on" notification for any one setting will mess with the other settings. Dev is working on a fix. other than that it should be working.
What exactly is happening on your end, you didn't give a lot of detail?
mdandashly said:
Make sure Light flow is checked in accessibility settings. So currently, having an "always on" notification for any one setting will mess with the other settings. Dev is working on a fix. other than that it should be working.
What exactly is happening on your end, you didn't give a lot of detail?
Click to expand...
Click to collapse
Sorry I was typing from my phone so just wanted to keep it basic.
You answered my question, all my notifications had been set to always on.
Thank you!
Sent from my Nexus 5 using Tapatalk
cc16177 said:
Sorry I was typing from my phone so just wanted to keep it basic.
You answered my question, all my notifications had been set to always on.
Thank you!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
No prob. I emailed the dev, he says he is working on a fox, so it shouldn't be too long now.
mdandashly said:
No prob. I emailed the dev, he says he is working on a fox, so it shouldn't be too long now.
Click to expand...
Click to collapse
Cool, thanks again.
Sent from my Nexus 5 using Tapatalk
cc16177 said:
Why am I having so much trouble getting light flow to work? I just had it working fine on my galaxy Nexus so I definitely know how to set it up but no matter what I do it won't work.
Are there any special settings I need to turn on or off?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Because the phone is less than a week old and people/dev's are just staring to get them so nexus 5 isn't even compatible yet . lightflow dev don't **** around, just give him a sec .... Development isn't magic takes time
drawde40599 said:
Because the phone is less than a week old and people/dev's are just staring to get them so nexus 5 isn't even compatible yet . lightflow dev don't **** around, just give him a sec .... Development isn't magic takes time
Click to expand...
Click to collapse
I understand that I wasn't trying to be rude I was curious.
I've been using lightflow since my OG Droid so I know how good the dev is.
Sent from my Nexus 5 using Tapatalk
cc16177 said:
I understand that I wasn't trying to be rude I was curious.
I've been using lightflow since my OG Droid so I know how good the dev is.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Wasn't trying come across as an ass if I did . sorry !
Just was reading some of lightflows comments on n5 and it just amazing how much of POS people can be .
drawde40599 said:
Wasn't trying come across as an ass if I did . sorry !
Just was reading some of lightflows comments on n5 and it just amazing how much of POS people can be .
Click to expand...
Click to collapse
Yeah for sure. The main reason I thought I was doing something wrong was because Droid life posted an article that gave me the impression the "always on" was working.
Sent from my Nexus 5 using Tapatalk
mdandashly said:
No prob. I emailed the dev, he says he is working on a fox, so it shouldn't be too long now.
Click to expand...
Click to collapse
I wish I was working on a fox right now.... damn that would be sweet
dannstarr said:
I wish I was working on a fox right now.... damn that would be sweet
Click to expand...
Click to collapse
You should be starting to get the update now. I've done a workaround for always on as the LG drivers just don't accept it. I'd class the "always on " option for the Nexus 5 as being "almost always on"
Updated the app now, will see how it goes
I still seem to be getting notification light illuminated after the notification has been read.
Addmitedly I don't have it running as a foreground service.
Anyone know of a way to get rid of the lightflow notification in the pull down shade? I like to keep that area clean for notifications. I know other apps offer an option to disable that notification.
spinedoc said:
Anyone know of a way to get rid of the lightflow notification in the pull down shade? I like to keep that area clean for notifications. I know other apps offer an option to disable that notification.
Click to expand...
Click to collapse
Uncheck the option that is "Run as foreground service" or similar.
Scottland said:
Uncheck the option that is "Run as foreground service" or similar.
Click to expand...
Click to collapse
Does that disable the app or any of its features?

[Q] keep getting this bugreport

I keep gettting this 'Bugreport" in the notification area...:
hammerhead-user 4.4 KRT16M 893803 release-keys
I have no idea what it means... This is a stock Nexus 5...
Thanks for looking and your help.
Steve
acron1 said:
I keep gettting this 'Bugreport" in the notification area...:
hammerhead-user 4.4 KRT16M 893803 release-keys
I have no idea what it means... This is a stock Nexus 5...
Thanks for looking and your help.
Steve
Click to expand...
Click to collapse
I've had it twice. Last one was just 2 minutes ago within hangouts. Nothing happened, no crash or anything just this in the notification bar and it asked me to send it.
Same thing here as well. Showed up twice since i had the phone. Got mine the monday after release. As others, nothing crashed, phone still operated as normal.
Bug reports are generated if you hold volume up & down + power.
More than likely you are doing this by accident.
El Daddy said:
Bug reports are generated if you hold volume up & down + power.
More than likely you are doing this by accident.
Click to expand...
Click to collapse
I just tried that button combination and I did the get same kind of report. But Idk how I could have done that on accident while using hangouts chatting without locking the phone or trying to.
nfaust01 said:
Same thing here as well. Showed up twice since i had the phone. Got mine the monday after release. As others, nothing crashed, phone still operated as normal.
Click to expand...
Click to collapse
No crashes here either but I am geting this quite often...
Also noticing this, even if I'm not even using the phone. Most recent one was an hour after the last time I had picked up my phone. It was just sitting on the table and bang, vibrates to tell me there is a bug report. I feel the need to re-iterate that it is happening without me having any interaction with my device.
Sometimes tight-fitting or crookedly-installed cases can press the buttons. Just a thought.
o_z0ne said:
Sometimes tight-fitting or crookedly-installed cases can press the buttons. Just a thought.
Click to expand...
Click to collapse
You maybe on to something here... I will take it out of the case and see what happens...
I am getting this a lot too and it just happens on its own. Using a spigen slim armor. May try a day without it and see what happens.
Sent from my Nexus 5 using XDA Premium 4 mobile app
o_z0ne said:
Sometimes tight-fitting or crookedly-installed cases can press the buttons. Just a thought.
Click to expand...
Click to collapse
Turns out u were right... I have a Spigen case and it would press on the power button when inserted in my belt clip pouch... Thanks.
El Daddy said:
Bug reports are generated if you hold volume up & down + power.
More than likely you are doing this by accident.
Click to expand...
Click to collapse
Is there a way to turn this option off?
VincentBe said:
Is there a way to turn this option off?
Click to expand...
Click to collapse
Turn off USB debugging.
Sent from my Nexus 5 using XDA Premium 4 mobile app
El Daddy said:
Turn off USB debugging.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Great! thank you kind sir! :good:

Categories

Resources