Related
Hello everyone!
I had some stability issues on my Samsung GT-I9003, so I flashed it . And, as the title says it, I'm stuck in a bootloop. I've tried 3 or 4 flashings with different packages. Some where "One packages", with one unique PDA, or I tried the XXKPE with everything. And I'm lost. I never get past the first boot screen.
[EDIT]
I found a way to boot it, but the touchscreen isn't working, so I'm now stuck on the language selection page...
Is it my ROM who doesn't fit?
[/EDIT]
Thanks!
Before going to download mode try wiping everything, then flash xxkpe TWICE then wipe again. Make sure you flash it correctly. And odin shows PASS. Try flashing the latona.pit included in xxkpe.
Press thanks if it helped..
Sent from my GT-I9003 using XDA
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
jonasdu91 said:
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
Click to expand...
Click to collapse
so weird. Where did you download your xxkpe. Try here
http://forum.xda-developers.com/showthread.php?t=1004647
then follow the guide here
http://forum.xda-developers.com/showthread.php?p=14933114
I think you just fail a step on flashing a rom.
---------- Post added at 09:16 PM ---------- Previous post was at 09:14 PM ----------
Flashing bagaria root is done after flashing a stock rom for it to be rooted. You failed to put CSC file in odin maybe. Follow the guide above perfectly then everything will be fine.
You start the procedure on Step 3 if your done downloading XXKPE here
http://forum.xda-developers.com/showthread.php?t=1004647
jonasdu91 said:
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
Click to expand...
Click to collapse
/stl11 is the /cache partition.
look like you fail to flash pit file, or u flash "one package .tar file" with partition ticked in odin.
see below for the samsung recommend setup
flash pit file with all the firmware one short.
if you flash from Froyo to GB, i recommend to flash the bootloader update.
however, flash on you own risk.
100% Work!
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
For those who are struck in boot loop or Softbrick their mobile do the following things exactly as they had mentioned. I followed them and boom my phone is back to normal.
For bringing your phone back to download mode (Recovering from Softbrick)
http://forum.xda-developers.com/showthread.php?t=1411768
After entering into download mode (reinstall Ginger bread )
http://forum.xda-developers.com/showthread.php?t=1133787
Note: This step deletes your user data, so be sure what you are doing
Definitely your phone should be back to normal if you follow these steps exactly.....
Million Thanks to all those who helped me in bringing back my mobile to normal function....
Hi, I am facing the same issue with a GT-I9003 as jonasdu91. I tried all the solutions mentioned above, tried all sort of firmwares. The only time the phone responded was when I flashed the bagaria file. That too ended up with a non-responsive touchscreen at the language selection screen.
Could anyone suggest what more could I do to get the phone to upgrade?
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
Worked for me too!!! You saved my life! Thanks!
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
Good!
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
How do I flash other stock rom after that? I've tried to flash XXLE4 rom, and received boot error and unmounted FS
Hello everyone, an acquaintance of mine, had initially given his Galaxy SL device to a friend of his, asking him, to 'update' the software on the device. The device had come with Android 2.2.1, pre-installed on it (PDA: I9003DDKB2; PHONE: I9003DDKA5; CSC: I9003ODDKA6).
Apparently, my acquaintance's friend flashed the I9003DDMF1 stock Gingerbread firmware via PC ODIN, and after my acquaintance gave me the device, I noticed, it did not boot to a home screen. It would boot loop at the Samsung boot animation.
The device boots into Download Mode, but does not get into the stock Recovery Mode. So, I attempted numerous remedial procedures. I used PC ODIN3 v1.85 for all flashing instances.
Keeping Misledz's guide, http://forum.xda-developers.com/showthread.php?t=1133787, as a reference, I flashed the I9003XXKPE firmware package, followed by the I9003XXKPQ_I9003SERKPQ_SER firmware.
After PC ODIN gave a PASS for the I9003XXKPE firmware package flashing instance, the device rebooted, and I observed a process, looking like the stock Recovery Mode, continuing on the device. There were a couple of strings, displayed in red colour. The device rebooted again to the Samsung logo, and I had to pull the battery out, to continue with the I9003XXKPQ_I9003SERKPQ_SER firmware flashing instance. After PC ODIN displayed the PASS sign and the device rebooted, I unplugged the USB cable, but the boot loop at Samsung boot animation persisted.
Since the above mentioned procedure did not solve the boot loop issue, I decided to take the device back to a stock Froyo firmware, and if successful, reattempt to 'update' the device to stock Gingerbread (2.3.6), by following Misledz's guide. I flashed the I9003_XXKB1 stock Froyo firmware, but this time, the device would not go beyond the Samsung logo.
As a momentary last attempt, before seeking help here, I flashed the I9003ZCKC1 firmware package, but yet, the device does not go beyond the Samsung logo.
All the flashing instances completed successfully on PC ODIN.
Is it possible to revive the device, such that it boots to a home screen and is functional again? I desperately need help.
YLNdroid said:
Hello everyone, an acquaintance of mine, had initially given his Galaxy SL device to a friend of his, asking him, to 'update' the software on the device. The device had come with Android 2.2.1, pre-installed on it (PDA: I9003DDKB2; PHONE: I9003DDKA5; CSC: I9003ODDKA6).
Apparently, my acquaintance's friend flashed the I9003DDMF1 stock Gingerbread firmware via PC ODIN, and after my acquaintance gave me the device, I noticed, it did not boot to a home screen. It would boot loop at the Samsung boot animation.
The device boots into Download Mode, but does not get into the stock Recovery Mode. So, I attempted numerous remedial procedures. I used PC ODIN3 v1.85 for all flashing instances.
Keeping Misledz's guide, http://forum.xda-developers.com/showthread.php?t=1133787, as a reference, I flashed the I9003XXKPE firmware package, followed by the I9003XXKPQ_I9003SERKPQ_SER firmware.
After PC ODIN gave a PASS for the I9003XXKPE firmware package flashing instance, the device rebooted, and I observed a process, looking like the stock Recovery Mode, continuing on the device. There were a couple of strings, displayed in red colour. The device rebooted again to the Samsung logo, and I had to pull the battery out, to continue with the I9003XXKPQ_I9003SERKPQ_SER firmware flashing instance. After PC ODIN displayed the PASS sign and the device rebooted, I unplugged the USB cable, but the boot loop at Samsung boot animation persisted.
Since the above mentioned procedure did not solve the boot loop issue, I decided to take the device back to a stock Froyo firmware, and if successful, reattempt to 'update' the device to stock Gingerbread (2.3.6), by following Misledz's guide. I flashed the I9003_XXKB1 stock Froyo firmware, but this time, the device would not go beyond the Samsung logo.
As a momentary last attempt, before seeking help here, I flashed the I9003ZCKC1 firmware package, but yet, the device does not go beyond the Samsung logo.
All the flashing instances completed successfully on PC ODIN.
Is it possible to revive the device, such that it boots to a home screen and is functional again? I desperately need help.
Click to expand...
Click to collapse
Firstm download this XXKPE: https://disk.yandex.ru/public/?hash=mTOUkkpPv4WgFtvIpy07S2CwUoU5gUcna1FTdjKHc90=
and flash it.
Put the files like this:
PIT - latona_20110114.pit
PDA - I9003XXKC1-REV08-PDA-low-CL964212.tar.md5
PHONE - MODEM_I9003XXKC1_REV_00_CL964949.tar.md5
CSC - GT-I9003-CSC-SERKC1.tar.md5
Click to expand...
Click to collapse
It contains all 5 files needed to boot your phone. This will repartition your phone and make it alive, after that, you may flash any 2.3.x ROM you like.
xumix said:
Firstm download this XXKPE: https://disk.yandex.ru/public/?hash=mTOUkkpPv4WgFtvIpy07S2CwUoU5gUcna1FTdjKHc90=
and flash it.
It contains all 5 files needed to boot your phone. This will repartition your phone and make it alive, after that, you may flash any 2.3.x ROM you like.
Click to expand...
Click to collapse
xumix, thank you very much for your response.
I believe, the 5 files contained within the I9003XXKPE_Odin3_1.8.5.zip package, would correspond to the options available in PC ODIN3 v1.85, as follows -
PIT > latona_20110114.pit
BOOTLOADER > APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5
PDA > CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5
PHONE > MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5
CSC > GT-I9003-CSC-MULTI-OXAKPE.tar.md5
Click to expand...
Click to collapse
Am I right?
:silly:
YLNdroid said:
Am I right?
:silly:
Click to expand...
Click to collapse
You are right
xumix said:
You are right
Click to expand...
Click to collapse
xumix, I flashed the I9003XXKPE_Odin3_1.8.5.zip firmware package using PC ODIN3 v1.85, but to no avail. The boot loop on the Samsung boot animation continues to persist.
EDIT
I have noticed there is a u1_02_20110310_emmc_EXT4.pit, contained within the Odin3-v1.85 folder. What is this, PIT file for?
I re-flashed the I9003XXKPE_Odin3_1.8.5.zip firmware package using PC ODIN3 v1.85, and the process completed successfully. But, since the boot loop at the Samsung boot animation persisted, I pulled the battery out, and booted into Recovery Mode, not once, but on two separate instances. I was able to perform a wipe data/factory reset, on the second instance. I also performed a wipe cache partition and rebooted the device. But, the boot loop issue still continues.
I have attached images of both instances, I clicked using another device, to this post.
If dont mind. Try my step below.
In download mode
Flash pit file alone. Make sure repartition is ticked.
Phone will black screen, you pull out battery and put back.
Download mode again. Flash xxkpe without pit file.
BTW, you error show properly is emmc chip broken, hope it is not.
Sent from my GT-I9003 using Tapatalk
chongns said:
If dont mind. Try my step below.
In download mode
Flash pit file alone. Make sure repartition is ticked.
Phone will black screen, you pull out battery and put back.
Download mode again. Flash xxkpe without pit file.
BTW, you error show properly is emmc chip broken, hope it is not.
Click to expand...
Click to collapse
chongns, I followed your stepwise suggestions, to the word, but unfortunately, the boot loop issue still persists. One distinct error under the stock recovery is, E:format_volume: rfs format failed on /dev/block/mmcblk0p3. Am I correct to believe this error strongly indicates, or rather confirms, the internal SD is damaged?
Also, what are the possible causes (physical, and or, logical) that would damage the internal SD? Is it worth sending the device to an authorised Samsung service centre, for an appropriate repair process?
YLNdroid said:
chongns, I followed your stepwise suggestions, to the word, but unfortunately, the boot loop issue still persists. One distinct error under the stock recovery is, E:format_volume: rfs format failed on /dev/block/mmcblk0p3. Am I correct to believe this error strongly indicates, or rather confirms, the internal SD is damaged?
Also, what are the possible causes (physical, and or, logical) that would damage the internal SD? Is it worth sending the device to an authorised Samsung service centre, for an appropriate repair process?
Click to expand...
Click to collapse
Friends, I still await your expertise.
:fingers-crossed:
I had CM10.1-3 stable installed, and everything was perfect, then I turned on the native encryption, the tablet started to acted slow but working, one day I woke up and find the tablet will not turn on so here is what I have done
Restarted the tablet, entered the decryption password and still hanged
Restarted the tablet again and then it boot loops on Samsung galax tab 2 10.1 screen
Restarted again and it will not boot at all
No recovery
I can access download mode
So I did try to reflash CWM 6.0.2 again with heimdall and it failed
All I got was "Firmware error occurred while updating please use kies the phone ! computer screen"
No other mode is working
Got Stock rom 4.2.2 tired with odin finishes but still reboot is black screen
Got esspreso_16G PIT file repartitioned and reinstalled the stock rom still no booting
Using heimdall repartitioned with resspreso PIT file from 201202 and I got DOWNLOAD MODE AGAIN !
Try to install orignal rom or CWM brick again
Using heimdall repartitioned and installed stock kernel only and x-loder
So currently it is charging and have DOWNLOAD MODE stating count of customes and kernel of SMASUNG_OFFICAL
My question is, is this software brick or hardware ? and how I can get the tablet up and running again using ODIN or Heimdall ?
Thank You
d
I am not sure, but what i would try:
Try Odin, flash Stockrom - uncheck "Auto-Reboot" !
When Odin finished directly boot into recovery from downloadmode.
Make a factory reset if recovery booted.
Reboot device.
Android-Andi said:
I am not sure, but what i would try:
Try Odin, flash Stockrom - uncheck "Auto-Reboot" !
When Odin finished directly boot into recovery from downloadmode.
Make a factory reset if recovery booted.
Reboot device.
Click to expand...
Click to collapse
Did try that, Odin 3.07 or something keeps flushing everything but the download mode on the tablet froze on 25% of the blue bar. then I get again error will firmware update, so I add again to heimdall and repartitioned and tried to flash the rom part by part starting with MLO as X-Loader and it told me successful with no reboot, tried to flash factorysysfs also stuck at 28% with heimdall, had to do reboot of the device, now the device is just blank black, no download mode, or the emergency firmware update via kies screen "phone ! computer" no idea what should I do :s it seems dead.
Why are you flashing pit-files all the time????? these files can difenitly dangerous and can kill your tab with a breeze if not used with care ....
you can´t do nothing with odin or heimdall if you don´t have downloadmode or "Black screen of death" ("Firmware error occurred while updating (...)")...
good luck
Android-Andi said:
Why are you flashing pit-files all the time????? these files can difenitly dangerous and can kill your tab with a breeze if not used with care ....
you can´t do nothing with odin or heimdall if you don´t have downloadmode or "Black screen of death" ("Firmware error occurred while updating (...)")...
good luck
Click to expand...
Click to collapse
It was the only way to get back to DownloadMode is by flashing PIT file, however I managed to flash orginal Kenerl back at that time and I did manage to flash X-Loder seems that what bricked the tablet, Now when I am connected to the PC I can see OMAP4430 driver, Some saying I need to use JTAG "RIFF BOX" or maybe OMAPFlasher but I am not sure if this the correct step or not, what really bothers me that when I had DownloadMode odin will not finish more than 28% of the rom. what do you think should I use OMAPFlasher ? and if there any guide to do so ? I just need the tablet to have bootloader and Kernel so I can flash back with Odin.
D
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
jackrabbit72380 said:
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
Click to expand...
Click to collapse
Follow the instructions from this post. Since you are soft bricked at the moment, you'll need to start at step 4. If you have an extSD in your phone, you might want to pull it until after you're up and running because the "Android" folder from Kitkat needs to be deleted and rebuilt for Lollipop.
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
jackrabbit72380 said:
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
Click to expand...
Click to collapse
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Ramer said:
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Click to expand...
Click to collapse
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
jackrabbit72380 said:
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
Click to expand...
Click to collapse
Try this: Do a battery pull, then put the phone in Download mode, hook up to PC and then open Odin and then Odin custom recovery, either twrp or Philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update Odin, there's a link to Odin 3.10.0 in my post. Let's see if we can get that far and go from there.
ramer said:
try this: Do a battery pull, then put the phone in download mode, hook up to pc and then open odin and odin custom recovery, either twrp or philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update odin, there's a link to odin 3.10.0 in my post. Let's see if we can get that far and go from there.
Click to expand...
Click to collapse
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
jackrabbit72380 said:
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
Click to expand...
Click to collapse
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Ramer said:
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Click to expand...
Click to collapse
Yes I tryed
I pulled the battery after Odin said PASS
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
when ever i try and boot the rom the phone vibrates 2 times and resets.
when ever i try to boot to recovery
i get
recovery booting....
recovery is not seandroid enforcing
set warranty bit : recovery
then phone reboots.
then it trys to boot the rom.
and vibrates 2 times and resets.
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
jackrabbit72380 said:
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
Click to expand...
Click to collapse
I saw your post count, I knew you knew what you're doing, just wanted to double check everything. Sorry, I'm out of ideas. I did ask @tdunham to take a look at this thread, if he has some other ideas, but he's offline right now. Hopefully he'll check in later.
What about flashing back to an older version of android? Full tar flash.
---------- Post added at 12:38 AM ---------- Previous post was at 12:36 AM ----------
Like ne5, and nothing else, just see if you can get stock to boot, no messing around trying to flash recovery.
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Ramer said:
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Click to expand...
Click to collapse
I tryied ni3 already
but as far as i know you cant downgrade the bootloader.
if i could flash just the bootloader for ota6 maybe that would help.
i will try downloading ne5 now but my last rom was running a nkd modem.
im going to try and flash G900P_NKD_FullRestore.tar in odin if that dont work ill try ne5
and will report back shortly.
well nkd full restore boots up to
unknowen error!
wait..
done!
udc start.
power reset or
unknown
upload mode.
this is the way i got it back from retech after they replaced my bezel and digitlizer and screen
i never had an issue with anything software wize before that.
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
tdunham said:
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
Click to expand...
Click to collapse
Yes I was using the pit file and yes I know to go to download mode from power off state. and no sim card is in the phone.
flashing ne5 stock with fingers crossed.
brb
nope
is there any bootloaders only i can flash?
well tryed everything all it does is vibrate 2 times. same as be4 im dead in the water. i don't know what's wrong or what to do.
I have tryed everything i can think of.
I can boot to download mode and flash anything i want but nothing works.
no recovery. no rom.
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
bednim said:
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
Click to expand...
Click to collapse
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
MAX 404 said:
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
Click to expand...
Click to collapse
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
bednim said:
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
Click to expand...
Click to collapse
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
MAX 404 said:
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
Click to expand...
Click to collapse
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
bednim said:
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
Click to expand...
Click to collapse
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
MAX 404 said:
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
Click to expand...
Click to collapse
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
bednim said:
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
Click to expand...
Click to collapse
When you get home, just try installing "Samsung Smart Switch" (it's no longer Kies) (http://www.samsung.com/sg/support/smartswitch/Smart_Switch_pc_setup.zip)
I understand that you already have drivers on your PC, but the Samsung Smart Switch might come with some updated drivers for your Samsung S7, which might change the scenario. Installing that, plus using another version of Odin (run it as Admin). I used this one just today. (http://dl.sammobile.com/Odin3-v3.11.1.zip)
If the flashing the recovery still fails, try flashing Stock rom under AP like suggested earlier. If that still fails.
Use Samsung Smart Switch's "Emergency recovery" but do the Initialization (2nd tab) by inputting your Phone model and let Smart Switch download the official firmware from Samsung's servers.
This must be done while your phone is in Download mode, so make sure you have enough juice to wait out the download process.
Good luck!
Hello, I have a SM-J700M, Brazilian model from a relative. It''s apparently hard bricked as I'm getting a "an error has occurred while updating the device software" message. While I'm still able to get into download mode, I can't get into recovery mode. This phone hasn't had its bootloader unlocked before, so when I tried to flash the stock ROM with Odin, and I've tried multiple different ROMs from Sammobile and elsewhere, both Lollipop and Marshmallow, however I always either get a bootloader message or an "invalid magic string" error in one case. I naturally cannot flash TWRP either because the bootloader blocks it as well. I've tried flashing just TWRP, or just the extracted hidden.img from the unpacked .tar file. I've also tried using both Smart Switch and Kies but they do not detect my phone. Is there any other possible solution?
FelipeFritschF said:
Hello, I have a SM-J700M, Brazilian model from a relative. It''s apparently hard bricked as I'm getting a "an error has occurred while updating the device software" message. While I'm still able to get into download mode, I can't get into recovery mode. This phone hasn't had its bootloader unlocked before, so when I tried to flash the stock ROM with Odin, and I've tried multiple different ROMs from Sammobile and elsewhere, both Lollipop and Marshmallow, however I always either get a bootloader message or an "invalid magic string" error in one case. I naturally cannot flash TWRP either because the bootloader blocks it as well. I've tried flashing just TWRP, or just the extracted hidden.img from the unpacked .tar file. I've also tried using both Smart Switch and Kies but they do not detect my phone. Is there any other possible solution?
Click to expand...
Click to collapse
What happens when you try booting into recovery? What key combo are you using to get to it? And are you able to boot into safe mode? (Hold Vol↓on boot)
Also, have you tried a different version of Odin? I've had problems flashing firmware if I use an older version. Not all versions play nice with all the different models.
Have you tried SmartSwitch?
And please stop trying with Lollipop.
Sent from my SM-J700F using Tapatalk
Spaceminer said:
What happens when you try booting into recovery? What key combo are you using to get to it? And are you able to boot into safe mode? (Hold Vol↓on boot)
Also, have you tried a different version of Odin? I've had problems flashing firmware if I use an older version. Not all versions play nice with all the different models.
Click to expand...
Click to collapse
When I try to boot into recovery it just gives me the "an error has occurred" message and. Now that I've tried flashing TWRP it just stays in the boot screen. I haven't tried another version of Odin though, just the latest one, but perhaps it will work with an older one. I'll try that and return here to report if it works. Thanks for your help.
FelipeFritschF said:
When I try to boot into recovery it just gives me the "an error has occurred" message and. Now that I've tried flashing TWRP it just stays in the boot screen. I haven't tried another version of Odin though, just the latest one, but perhaps it will work with an older one. I'll try that and return here to report if it works. Thanks for your help.
Click to expand...
Click to collapse
I know how it is to get stuck in that kind of loop. If odin at least gives you a pass when flashing a recovery, you can try flashing the stock recovery or TWRP, leaving the auto reboot option checked, and quickly holding Vol↑+Home+Power as soon as the screen turns off. If the error in stock recovery shows a triangle, you can try tapping Vol↓2 times to bring up its menu. If that doesn't work, try Vol↑ 2 times. If none of those work, I would try pulling the battery, and rebooting into recovery once more and giving it one more try. I honestly think your device can be saved. It might take a few tries though.
Spaceminer said:
I know how it is to get stuck in that kind of loop. If odin at least gives you a pass when flashing a recovery, you can try flashing the stock recovery or TWRP, leaving the auto reboot option checked, and quickly holding Vol↑+Home+Power as soon as the screen turns off. If the error in stock recovery shows a triangle, you can try tapping Vol↓2 times to bring up its menu. If that doesn't work, try Vol↑ 2 times. If none of those work, I would try pulling the battery, and rebooting into recovery once more and giving it one more try. I honestly think your device can be saved. It might take a few tries though.
Click to expand...
Click to collapse
You have one option at this point, which is to flash stock through odin.
Ill link you to a website, which has your firmware download, and a guode to flash stock through odin.
updato.com
If flashing stock thru Odin doesn't help. I've got something that will. Engineer firmware.