I dunno if this is the right place to ask help but i got this galaxy tab 2 10.1 and there's no backlight after water damage.
Is there someone who have repaired this kind of problem earlier with the same symptons? Do you know which chip is the led driver and is where can i buy one?
Thanks.
FuLLi said:
I dunno if this is the right place to ask help but i got this galaxy tab 2 10.1 and there's no backlight after water damage.
Is there someone who have repaired this kind of problem earlier with the same symptoms? Do you know which chip is the led driver and is where can i buy one?
Thanks.
Click to expand...
Click to collapse
I am also having a hard time finding info regarding the backlight repair on this unit. Please keep me posted if you find anything and I will return the courtesy The XDA community seems to know everything about everything digital.
Related
Hi,friends, I recently open my phone to remove dust from front camera, fot that I had searched a lot and with the help of below comments I have got many thing to know about the phone hardware. I have found many manual for our phone which can help u on hardware base and may be software,too. So I am attaching the manual below.
Let me tell u that I am providing this manuals so if u want to mess your phone, you can open it with help of it. However decision of opening the phone will be only yours, i will not be responsible for damaged caused to your phone. If u are having warranty than then the best way to visit service center only(Advisory). After all choice will be yours...
I am not expert of hardware. I am just sharing the manuals that can help you. How ever u can post your questions based on hardware and person who will have solution will reply. I request to reply who has solution.
It may help u to open the phone.
Will be back with some more manuals.
Here down my problem was...
Hi, friends. I have got dust in front camera of my phone. It had happened three three months before also, but at that time had got it done as only two day of warranty were there. But now it has happened again. So I thought to try to open my phone. I opened seven screws from back side. But i can not open inner back cover as volume button and lock button are attached with it through holes. So need help if anyone have tried before and have opened the phone before. I searched on google also to find proper answer but i didn't get. I found manual of our phone but there was nothing about hardware. If i can open inner back cover and can remove dust by my self. I think if i can solve it by my self and don't have to pay money to sammy as i find that they some times take much money. So if anyone can help here before I need to go to sammy.
Search google disassembly of galaxy S GT 9000
Sent from my GT-I9100 using xda app-developers app
Theres dust in your front cam glass means your touch screen glass has slightly come off near the front cam. Try to just pull out a little bit.. N insert a ear bud... Yess a ear bud to wipe the dust off. And then a couple of adhesive drops will stick the screen back.
It had happened to me.. N this is what i did.
Sent from my GT-I9003 using xda app-developers app
@nitinvaid:- Thanx, typing "disassembling galaxy sl i9003" helped me a lot. Even i got all types of maual for hard-ware and soft ware base. Almost every stuff related with our phone both hardware and software....
@chinmay_7d:- I didn't get this "your touch screen glass has slightly come off near the front cam"... I cleared the dust with ear buds..
After all I did it my self. However it is quiet risky and one needs to be very care-full. One can brick his\her phone and divide it into little stone. I got one little crack on inner back cover but i will solve it and i got an ic loose which i had to attach with tap and cotton. However i got to know very much about the spar-parts. I am think of making this thread base on hardware help with all manuals available.....What do u say guys??? Should I or not.
androman1507 said:
@nitinvaid:- Thanx, typing "disassembling galaxy sl i9003" helped me a lot. Even i got all types of maual for hard-ware and soft ware base. Almost every stuff related with our phone both hardware and software....
@chinmay_7d:- I didn't get this "your touch screen glass has slightly come off near the front cam"... I cleared the dust with ear buds..
After all I did it my self. However it is quiet risky and one needs to be very care-full. One can brick his\her phone and divide it into little stone. I got one little crack on inner back cover but i will solve it and i got an ic loose which i had to attach with tap and cotton. However i got to know very much about the spar-parts. I am think of making this thread base on hardware help with all manuals available.....What do u say guys??? Should I or not.
Click to expand...
Click to collapse
Ya buddy...go ahead. It will help people
Hi guys,,, need help! Any idea on how to remove a pen that has been inserted into the tablet the wrong way and is now stuck and jammed in good.
And before anybody asks....it wasn't me who did that!
Thanks!
There is Q&A section you should be posting there to get better response.
Take it to a service center, as you may need to open the device to remove it, it should not go in unless you have used strong force to push it in.
Be safe take it to a service center get it removed so that you do not risk damaging anything
seochris said:
Hi guys,,, need help! Any idea on how to remove a pen that has been inserted into the tablet the wrong way and is now stuck and jammed in good.
And before anybody asks....it wasn't me who did that!
Thanks!
Click to expand...
Click to collapse
I'd drill a small hole in the end of the pen and put a screw in it and pull it out by the screw. The pen will probably be a write off but you can replace it at Best Buy. Samir, there are no service centers in the U.S. You have to ship it to a central location to be repaired and it'll be expensive and you'll be without your device for a while.
Wow that sucks. I've been hearing bad stuff about how difficult it is to find Samsung shops or accessories in us, but didn't know it was that bad. I live in Singapore and there are many outlets and care centres around. I faced the same problem as I dropped my note phablet with the spen not fully inserted ndit ended up going in the wrong way. Head down to a service centre and they fixed in on the spot.
Sent from my GT-N8000 using xda app-developers app
Hi,
Could you please help me on how can we fix broken touchscreens? I'm using Tinji (Tianji i9300 s3 clone) mt6577 phone. My Einstien brain managed to cut the flex cable to touchscreen and its now not responding at all. I'm using Tinji i9300 mt6577 chinese phone.
Initially, the screen did not respond on the right and left wing where I was struggling to even unlock it.. Thought of opening the cell and reassembling it myself looking at various forums feedbacks mentioned here. I opened the cell apart but before I could realize that the flex connection touchscreen, I already had broken it and now the touchscreen does not respond at all. Dead as stone!!
Is there a way to fix it. Request your help plz. Thanks.
buy a new one. those digitizers are not that expensive and getting a new one is easier than soldering a flex cable. trust me, i tried it myself on a cannoo.
Chrizzly92 said:
buy a new one. those digitizers are not that expensive and getting a new one is easier than soldering a flex cable. trust me, i tried it myself on a cannoo.
Click to expand...
Click to collapse
Thanks Chrizz,
Phew!! atleast I have someone hearing me on these forums.. Thanks a ton for your reply..
Request you to please guide me from where do we get these digitizers? are they screen specific as in 4.7 inch or CPU specific as in mt6577 specific? Or will normal digitizer work? Thanks.
Help
Good evening,
I have same problem with my i9300 Tianji, you can tell how you solved your problem.
If you bought a touch screen where you purchased
Best Regards
Raul Martins.
I have a a number of questions so thought better to put in one post - if any particular point should go to a different section please advise.
Got a Galaxy Note 10.1 for Christmas and rooted it.
Managed to damage LCD screen. Outside glass screen is in perfect condition. Underneath the glass around 3/5's of the screen is not working.
I'm assuming this won't be covered by warranty but I have a number of questions and would appreciate any answers.
1. If I get replacement LCD on eBay is it safe enough to follow YouTube video and attempt self repair or should I take it to phone repair shop? I'm assuming Samsung won't do anything as it looks like accidental damage.
2. I was thinking of using multiscreen so i could still use it in the meantime and change a few things and possibly unroot before i sent in for repair. To set this up I'm thinking id have to share the screen to a monitior or laptop or something? Is this possible?
Thanks in advance for any advice, much appreciated. Should have got the damn insurance!!
harrisonbarnes said:
I have a a number of questions so thought better to put in one post - if any particular point should go to a different section please advise.
Got a Galaxy Note 10.1 for Christmas and rooted it.
Managed to damage LCD screen. Outside glass screen is in perfect condition. Underneath the glass around 3/5's of the screen is not working.
I'm assuming this won't be covered by warranty but I have a number of questions and would appreciate any answers.
1. If I get replacement LCD on eBay is it safe enough to follow YouTube video and attempt self repair or should I take it to phone repair shop? I'm assuming Samsung won't do anything as it looks like accidental damage.
2. I was thinking of using multiscreen so i could still use it in the meantime and change a few things and possibly unroot before i sent in for repair. To set this up I'm thinking id have to share the screen to a monitior or laptop or something? Is this possible?
Thanks in advance for any advice, much appreciated. Should have got the damn insurance!!
Click to expand...
Click to collapse
How did you damage the lcd and not damage outer glass? Your answer may help us to better help you.
.
kkretch said:
How did you damage the lcd and not damage outer glass? Your answer may help us to better help you.
.
Click to expand...
Click to collapse
I have no idea! I think i may have sat on it when it was under a blanket on my bed? There literally isn't a scratch or mark on the outside. It is in pristine condition.
Any chance samsung would replace?
And of course i would have to unroot before returning to then even if they would replace?
Is that possible without access to the full screen!
Use "droid VNC server" (need root)
Dear XDA community...
I've been a passive participant in many of your threads and most of the time I have managed to solve my issues thanks to your replies. Finally i have decided to join you and hopefully also help in some of the cases.
My current issue is a Samsung Galaxy Trend which display and digitizer have been broken. I have easily managed to replace those, both of which were working fine on the first boot. The display once got frozen tho and since that time the only thing i can see is a white snowy (no-signal tv alike) screen with some colorful dots here and there. Replacing the Lcd once again brought no change, so i guess it may be either pcb/ic issue or a software bug. I will try uploading a pic of the display as soon as possible.
I hope someone might have encountered this kind of defect and could help me solve it.
Best regards,
Damian aka Infernaesty.
Hi,
Thanks for using XDA Assist the snowy thing is because either the way you have fixed is not right and there is some connection issue to board and display or you may accidentaly damaged glue of Display and board fix which some devices have best thing is to get it repaired by Samsung Official Outlet or in other Mobile Repair Shop has further anything may damage other parts of device
Good Luck !