Please help me, and sorry for the long Megilla.
I have a LG Lucid vs840 4g verizon phone. I installed the ICS khz with no problems and rooted with the usual windows utils, so my adb and drivers work fine.
As the recovery partition seems to be locked (therefore no CWM and now CM10), I reverted to Gingerbread in order to install CWM.
Here is the strange part. ADB does not see the same device which is now loaded with Gingerbread. Other then that the GB Rom is stock, and working fine .
Needless to say, I reinstalled drivers, made sure USB debug is on, as well as tried it on 2 PC's. So therefore, cannot root Gingerbread etc.
As soon as I loaded ICS, ADB worked fine again.
Does the Gingerbread Rom require different drivers? or
Does someone have a good Gingerbread ? or perhaps CWM in khz format.
Thanks for any help
Related
So this is my first post on here because i'm having just one minor problem. I recently rooted my droid eris running the 2.1 firmware and installed the gingerbread 2.3 rom. Everything works on the new rom except the first time i tried plugging my phone in to my computer it says it is an unrecognizable device, therefore i am thinking that the device driver software was deleted. Which is probably true since i did a full wipe before loading the new rom. Anyways i was wondering if i can just re install the usb drivers or what i need to do to make my device recognizable again because i'm wanting to take gingerbread 2.3 off my phone and just use kaos froyo 2.2. Thanks!!
Okay, so I read and read, searched and searched. So far I'm pretty stuck.
I did a ton of research before taking my LG P500h, and flashing the ROM because I wasn't a fan of the Froyo android setup. Did everything properly, ran an nandroid backup, everything that I was told to do.
Rooted using Gingerbreak APK, custom backup using Amon_RA custom recovery. All done using the latest USB drivers LG updated me with.
I am currently with Koodo Mobile here in Canada. Pretty much an offspring of Telus Mobile. Currently I am running Cyanogen Mod 7 the 6.5.7 beta build, and the phone is not bricked, or giving me any errors or hassle.
The problem is that I cannot use the 3G network or use the Koodo network. It only defaults to Telus towers. No android market showing up anywhere either. From what I've found on here, there doesn't seem to be a bugfix solution to this, and no settings I've been able to change on the phone has helped my situation. Maybe I missed something.
So, I decided to take it back to where I began, back to Froyo 2.2.1 . This is where it all went wrong. Tried going through the Nandroid backup and restoring that, I was given an " Error : run 'nandroid-mobile.sh restore' via adb! " . Okay, I'm not exactly a Java programmer so I'm a little intimidated. I do however have Android SDK going on my laptop.
Some more searching revealed the KDZ_FW_UPD.exe flashing method. I got the right KDZ file for my Koodo phone, V10V_00.kdz and began the process. Everything checks out, good to go, started update. Wait, phone not found? WTF! My laptop recognizes it, says my phone is connected and working. No problems here, just can't find it? UGH.
So, I need someone to either give me info on getting it to flash the kdz, or get Cyanogen Mod 7 working properly on my device.
Please help, I'll fully admit I'm a noob to this, and not an expert programmer either. But, I know computers and I fully understand what I have done so far to my phone. Just not enough to fix it.
Okay, I have gotten some things working on my phone. I think I am settling into Cyanogen Mod nicely. I missed the Google apps flash zip so I have my market and stuff. Its a shame the data does not work though. Oh well I will keep updating as it gets developed.
Sent from my LG-P500 using XDA App
GOT IT! finally...
Finally got my phone recovered to OEM specs. I had to restore my computer back to before I installed all my drivers and reinstalled all my USB drivers from there. Phone connected to USB properly, ran the KDZ updater, and it sucessfully installed the V10V kdz. All is well.
finally good luck.. enjoy androiding..
When you flashed the cyanogen mod rom what program did you use to flash the phone? And how did you make a rom backup? When you reflashed the stock rom did it still have all the original bloatware?
LG Optimus P500h TELUS became dead during Upgrading
Hi everybody!
I have LG Optimus P500h Telus. I purchased from Kijiji. I don't have any papers or documents for that so i cannot claim its warranty.
I was trying to upgrade its version during upgrading my device was stuck so I disconnected and plugged out its battery and inserted again. When i tried to turn it on. It never turned on again. It never ever appeared emergency mode again. I tried for several times by pushing home, power, and volume up and down buttons, and escape buttons. Now its just like dead. It never showed any sign of life. If anybody have any idea what happened with it and how I can recover or where I should take this one for repairs. I am in toronto, canada.
Your help and suggestions will be appreciated.
HELP!
http://forums.androidcentral.com/t-lg-phoenix-thrive/127858-jobans-kernel-2-08-overclock-cm7-2-3-7-etc-gyro-fixed-60.html
My problem starts from post #600
Please.
I am having some phone problems as a result of a root attempt.
Phone : LG p999
Carrier : Wind (Canada)
Here's what I did:
1. Tried superoneclick root program. It never got to completion and I couldn't figure out why. It always failed at right before finishing, even after reboots.
2. After superoneclick , I decided I would edit the adb shell manually. I did not initialize psneuter because that step was successful with Superoneclick. I loaded the superuser package. After this, I couldn't get the phone to boot, even in recovery mode.
3. Next I used One-Click ClockworkMod Recovery NvFlasher to load clockworkmod (cwm) . At first I loaded it onto internal SD. This worked fine but I couldn't get it to recognize any backups or cm7 nightlies.
4. Then I tried loading on the external SD. This worked, I couldn't see any backups but could load cm7 nightly and gapps.
5. Rebooted phone, everything fine. But within a few hours, my 3g was not working. I typed #*#*4636*#*# and saw the 3g settings were empty. Apn settings are normal though.
So here is where I'm at now. Wifi, SMS, calling all work. Cannot access 3G, sdcard (can’t take pictures).
Also, I didn't make a backup. Yea, that was stupid.
first thing were you on 2.2.2 or 2.3.3 when you first tried superoneclick? It sounds like you did the update and were on 2.3.3. The superoneclick methode does not work for rooting anymore. You have to nvflash CWM first. Then flash xboarders stock ota rooted or any Rom that is pre rooted I think will work.
So what I would do at this point is try using nvflash and flash back to stock and start over. You will probally have to reinstall CWM then I would just use the xboarders stock rooted ROM just to gain root then install CM7. You probally dont have to flash xboarders first but that is the way I know will definitly work so that is what I recomend. Also I dont know if the NVflash returns the phone to stock 2.2.2 or 2.3.3 I have never done it. maybe someone else who knows more could chime in.
Charlie
Are you already on Cyanogen Mod 7 as your title indicates? CM7 is rooted OOTB. There is no reason to try and root it again.
Yes it is running CM7 now, but with some serious problems:
1. Can't use one click to flash stock ROM -- each time I try the phone gets stuck in a rebooting loop and just eventually freezes.
2. 3G/sdcard problems with CM7
- not sure if this is just an issue with the CM7 build or whether my phone is causing this.
I have flashed CM7, but the weird thing is that the 3G works fine for about a day and then it cuts out. Its not an APN thing --> I checked the settings. Any ideas what is going on there?
Gonna try loading xboarders when I have a free evening.
Thanks
Hello
I'm currently trying to make a theme for a custom rom but am running into trouble while connecting to adb. My infuse is running CM7 and windows can't find a driver to recognize the device. I'm wondering if this is a problem with me running CM7 because all drivers are installed, including - Samsung USB Driver for Mobile Phones, and Kies Mini (which may be irrelevant ).
Thank You
Try to reflash, ran cm7 for along time and never had a issue, remember to follow the flash directions to a t, of can be temperamental if you don't., good luck
SENT FROM MY AEON ROCKIN INFUSE
I may just flash a samsung based rom, I didn't have this problem in Ubuntu lol.
Hey there thunderbolt lovers not on Verizon. I've always had to try N run a DIAG script or restore a nandroid just like everyone else to program our phones to other carriers. Well it seems the DIAG scripts don't always work and restoring a nandroid and reverting back to your old rom takes forever! Hopefully I have a solution for some folks, as this doesn't always work but it has worked on 4 outta 5 of my bolts. With the latest 4ext recovery installed, rc8 or rc9 tested by me. Also make sure you have the latest ics radios installed, the first ics radio never worked for me. Boot into your recovery and check your ports in device manager or your choice of software for programming. If all goes well you'll see a USB diag port & a 9k diag port. If they are there, proceed to programming your phone. I have tried this on 5 phones with 4 different roms and it just works. Make sure you have had your phone in diag mode before and the drivers are installed correctly on your computer. I've also done this with Santods Unsense Jelato R26 but I think you have to flash the HTC phone and dialer first. Just try it, you may get lucky and it works, the least that could happen is, it don't work for you. Enjoy!
Sent from my ADR6400L using xda app-developers app