Database Info

Vodafone smart II/Alcatel v860 Reocovery !ROOT!

Here is recovery for Vodafone smart II
I came across it if needed .
Download put it in the root of your sd card turn off your phone.
then turn the phone back on hold volume + power
once the phone vibrates let go of power key keep holding volume + button
and it will boot into recovery
select install zip from sd card
flash the file and you will have root.
I have Also attached the fastboot drivers for alcatel if anyone needs it .
--------------------------------------------------------------------------
For people who are testing Custom roms if you bricked your phone follow this other guide for bringing most alcatel back from the dead .
use your own recovery.img
To enter fastboot:
turn your phone off then
Power off the device and holding the power and volume down keys. Your phone will now be in "fastboot" mode.
http://forum.xda-developers.com/showthread.php?t=1144773
you can flash other roms if you want to test ! BE CAREFULL flashing other non compatible rom can brick your phone.Unless of course you know what you are doing.
use stock italian rom below to restore.
Stock Italian Rom found in this thread .-Only CONFIRMED working stock rom for all devices
Thanks to who ever posted it stock in Italian ROM, updated this post.
https://rapidshare.com/files/2320554871/Stock ITALIAN Vodafone Smart 2 (Alcatel V860).zip
Click to expand...
Click to collapse
Mirror:
http://www.4shared.com/zip/2kME6l4N/...dafone_Sm.html
Click to expand...
Click to collapse
Here is the Unpacked system.img from the stock Italian ROM as requested
http://www.mediafire.com/?khpdey37edwvzlv
Click to expand...
Click to collapse

this is for root access right? thank you!

lzk87 said:
this is for root access right? thank you!
Click to expand...
Click to collapse
yes

again, thank you!

Great!!! thanks!!!
this process is reversible?? How to unroot?

antobz said:
Great!!! thanks!!!
this process is reversible?? How to unroot?
Click to expand...
Click to collapse
search the forum how to unroot
go back to stock rom .

If you need the device driver (adb) here: http://mir.cr/PHT9ZNLJ
bye

That driver it is original driver from SD card, in my case with phone bricked and blocked with android image on screen did not helped to be recognized by PC and install for hw detected as: VID_0A5C&PID2132.
Here you have part of backup from a brand new phone Vodafone Smart 2 before I bricked:
.android_secure.img
boot.img
bootloader.img
recovery.img
system.img
nandroid.md5

Voda_Smart_2 said:
That driver it is original driver from SD card, in my case with phone bricked and blocked with android image on screen did not helped to be recognized by PC and install for hw detected as: VID_0A5C&PID2132.
Here you have part of backup from a brand new phone Vodafone Smart 2 before I bricked:
.android_secure.img
boot.img
bootloader.img
recovery.img
system.img
nandroid.md5
Click to expand...
Click to collapse
did you fix your phone yet ? flash the recovery.img via fastboot to restore.

No I did not succed because I don't have the driver for VID_0A5C&PID2132 and sw for 860 to flash it.
I tryed to edit original files from SD card and installed with error device not started but that driver did not worked, at connection PC I get error, phone it is not detected by sw you posted for ALCATEL OT-980 /OT-981 recovery here: http://forum.xda-developers.com/showthread.php?t=1144773
Look like it is required alcatel service program for V860 that is able to flash the phone when connected at USB.
---------- Post added at 10:13 AM ---------- Previous post was at 10:07 AM ----------
If I remember corect I think I killed the phone sw because I use update with CWM.zip instead to use install CWM.zip...
CWM started, but did not made backup and at reset phone was bricked with android image on screen at power on.

worked!

Voda_Smart_2 said:
No I did not succed because I don't have the driver for VID_0A5C&PID2132 and sw for 860 to flash it.
I tryed to edit original files from SD card and installed with error device not started but that driver did not worked, at connection PC I get error, phone it is not detected by sw you posted for ALCATEL OT-980 /OT-981 recovery here: http://forum.xda-developers.com/showthread.php?t=1144773
Look like it is required alcatel service program for V860 that is able to flash the phone when connected at USB.
---------- Post added at 10:13 AM ---------- Previous post was at 10:07 AM ----------
If I remember corect I think I killed the phone sw because I use update with CWM.zip instead to use install CWM.zip...
CWM started, but did not made backup and at reset phone was bricked with android image on screen at power on.
Click to expand...
Click to collapse
i maybe able to to help you fix it check ur inbox join me over skype .

someone has already found the "stock rom" ??

Sorry I can not seem to make the root, which file should I put in the sd? I put the file but when I go into recovery superuser.apk alcatel 1.0.0.0.1 that file does not work
help me please?

can you make a full backup (from recovery) and post here?
you have to put the file in the root of SD and do a "install ZIP from sdcard" (don't use install update.zip)

I did a backup a while ago and it seems to be in sd card in a folder called <<alcatel-onetouch(1)>> it contains 10 files with .img extension and one with .md5

it's a "clean vodafone" backup? (factory settings, no app removed, no root) ?
can I flash in my phone via recovery?

I have a clean backup from Vodafone Smart 2 phone if you need it, phone was newer turned on with SIM card inside.
The only problem it is lenght of the archive ~300Mb and because I don't have any account on any upload sites ( and don't want to have one ) you have to tell me exactly how to send it to you, I will not send by email, use PM for details.

Voda_Smart_2 said:
I have a clean backup from Vodafone Smart 2 phone if you need it, phone was newer turned on with SIM card inside.
The only problem it is lenght of the archive ~300Mb and because I don't have any account on any upload sites ( and don't want to have one ) you have to tell me exactly how to send it to you, I will not send by email, use PM for details.
Click to expand...
Click to collapse
please check PM thank you!
edit: I see the files, THANK YOU!
edit2: there is a way for add more languages? no ITA in this recover
anyway no problem.. again, thank you!

i have problems with the phone, after I crashed the root of all, the play store closes by itself, the same thing for the browser and other programs
I did a factory reset but nothing changed, I tried to be a wipe recovery, and nothing changes. Unfortunately I have not made any backup copy, what should I do?

[Q] Samsung Galaxy Sl GT-I9003 not booting up after rooting

I followed the steps as mentioned in http://forum.xda-developers.com/showthread.php?t=1351056
But when I restarted my phone it does not go beyond booting screen. I tried recovery mode but the screen goes blank.
I have attached the odin screen.
Can somebody please help me as I have run out of options.::crying:

Maybe you can try flashing kpe again before flashing cf root.
Sent from my GT-I9003 using xda premium

icephatom said:
Maybe you can try flashing kpe again before flashing cf root.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I cannot go further from boot screen i.e. the screen that displays Samsung Galaxy S GT-I9003, a blank screen comes after that.
When I try to enter debug mode I get a blank screen.
Same happens when I try to enter repair mode.
I did flashing the first time and I cannot find a way to boot my phone now.
Please help !!.

pull up your battery,and goto download mode
1.Download XXKPE+PIT (search in development section!!)
2.Klik PIT first,and add PIT file.and flash it
3.pull up your battery again,goto download mode
4.Flash XXKPE(boot,PDA,CSC,MODEM) flash it twice
5.donee:victory:

Thanks you all for your suggestions. I am able to boot and root my device. On my way to install ICS on it.
Since its my first time playing with my phone I feel confident to be part of this community of helpful people

gamodg said:
Thanks you all for your suggestions. I am able to boot and root my device. On my way to install ICS on it.
Since its my first time playing with my phone I feel confident to be part of this community of helpful people
Click to expand...
Click to collapse
after that you must flash another stable firmware,like DDLF or XWLF bcoz XXKPE isn't stable

i need help
i flashd cwm via mobile pda and my phone stoped booting i tried all i can bt it refused i really need helppp....:crying:

amsad said:
i flashd cwm via mobile pda and my phone stoped booting i tried all i can bt it refused i really need helppp....:crying:
Click to expand...
Click to collapse
Flash the normal way..
here are the instruction http://forum.xda-developers.com/showthread.php?t=1133787

i need help with my gt-i9003
malungkot said:
Flash the normal way..
here are the instruction http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
my gt-i9003 is not detected with the odin so how can i make it detect while it is in download mode? i need help please my phone is not booting and the odin is not detecting the phone....:crying:

amsad said:
my gt-i9003 is not detected with the odin so how can i make it detect while it is in download mode? i need help please my phone is not booting and the odin is not detecting the phone....:crying:
Click to expand...
Click to collapse
reinstall the drivers and kies in ur pc...then restart ur pc..then connect ur mobile in download mode...wait few minutes for drivers to get installed..then it will be detected in odin..

gamodg said:
I followed the steps as mentioned in http://forum.xda-developers.com/showthread.php?t=1351056
But when I restarted my phone it does not go beyond booting screen. I tried recovery mode but the screen goes blank.
I have attached the odin screen.
Can somebody please help me as I have run out of options.::crying:
Click to expand...
Click to collapse
maybe your kernal is bricked by something also this thing is happen with me ,i searched google a tool which unbrick your phone just boot into download mode and click this tool,but remember this tool need java to be installed on your computer then double click on this app and just unbrick your phone its easy to use.
link:http://code.google.com/p/heimdall-one-click/downloads/list
download oneclick.jar from above this link and run it on windows,dont forgot to run .jar files u have to install java runtime enveroment on windows

my samsung galaxy s gt i9003 mt booting
When I tried to enter in "Recovery mode" it give followin massage:
Android system recovery <3e>
Enter : Ok Key, Select : Vol Up/ Vol Down
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
---------------------------------------------------------
E:failed to mount /data (no such file or directory)
--Copying media files...
Sucessfully copied media files.
# MANUAL MODE #
-- Appling Multi-CSS...
Installing Multi-CSS
Can't access to '/system/csc/INU/system/'.
Successfully applied multi-CSS.
and sometime When I tried to enter in "recovery mode" it give followin massage:
Android system recovery <3e>
Enter : Ok Key, Select : Vol Up/ Vol Down
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
---------------------------------------------------------
E:failed to mount /data (no such file or directory)
--Copying media files...
E:failed to mount /data (File exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet, Please use UI menu for format and reboot action.
Media files copy failed.
# MANUAL MODE #
-- Appling Multi-CSS...
Installing Multi-CSS
Can't access to '/system/csc/INU/system/'.
Successfully applied multi-CSS.

help me!
MR.Volkf said:
pull up your battery,and goto download mode
1.Download XXKPE+PIT (search in development section!!)
2.Klik PIT first,and add PIT file.and flash it
3.pull up your battery again,goto download mode
4.Flash XXKPE(boot,PDA,CSC,MODEM) flash it twice
5.donee:victory:
Click to expand...
Click to collapse
i am a noob . can you please explain the above process in detail. what is XXKPE+ PIT?
i have a GT I9003. please help me. i tried to root my phone and i am now stuck in boot. recovery menu does not appear when i press volume up + home + power keys together.:crying::crying:

nhehern said:
i am a noob . can you please explain the above process in detail. what is XXKPE+ PIT?
i have a GT I9003. please help me. i tried to root my phone and i am now stuck in boot. recovery menu does not appear when i press volume up + home + power keys together.:crying::crying:
Click to expand...
Click to collapse
first pull your battery and sim then leave your phone for 5 minute and place them again,press vol up+home+power button

MR.Volkf said:
first pull your battery and sim then leave your phone for 5 minute and place them again,press vol up+home+power button
Click to expand...
Click to collapse
thank you, i'll try it.
but what about the boot? its stuck.
---------- Post added at 03:49 PM ---------- Previous post was at 03:39 PM ----------
it doesnt work. the logo (samsung) fades out to a blank screen. after a min if i leave the keys it reboots.
do i have to flash clockwork mod or something? please help.

nhehern said:
thank you, i'll try it.
but what about the boot? its stuck.
---------- Post added at 03:49 PM ---------- Previous post was at 03:39 PM ----------
it doesnt work. the logo (samsung) fades out to a blank screen. after a min if i leave the keys it reboots.
do i have to flash clockwork mod or something? please help.
Click to expand...
Click to collapse
you must turn off the phone first,and then go to download mode

MR.Volkf said:
you must turn off the phone first,and then go to download mode
Click to expand...
Click to collapse
sir, the download mode works but what should i do next ? what should i flash? i have not flashed a clockwork mod only the cf root file for ddkp1. is that why i dont get a recovery menu?
can you contact me on [email protected] +918888948769

nhehern said:
sir, the download mode works but what should i do next ? what should i flash? i have not flashed a clockwork mod only the cf root file for ddkp1. is that why i dont get a recovery menu?
can you contact me on [email protected] +918888948769
Click to expand...
Click to collapse
you should flash that stock rom like Full DDLF2 (With .pit file) and see the instruction in thread,i'm too lazy to type the number add me +6283899194609

I didn,t find any recovery for my samsung gt 19003 plz help me..!!

[REQ] Tutorial to backup to original firmware

hello i'm trying to original firmware (the last one i can find) but i can't do it with adb or custom recovery maybe i 'm too stupid or french ^^
but if someone can make a thin tutorial , then i can send my tablet to Acer for the screen issue (not solved by the tricks of parameter)
thank a lot

@Amidamaru87,
If you already have CWM installed then it's very easy.
1- Take the original (base) firmware, not the last one. Very likely the last one is not a complete firmware but an update to the original one.
2- Take the update.zip file and unzip it to a folder.
3- Go to folder "\META-INF\com\google\android"
4- Edit the updater-script and put a # as first character of first line. This will avoid this line to execute: #assert(getprop("ro.product.name") == "a510_...");
5- Zip all files again and name it update.zip.
6- Flash it with CWM.
7- When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right?
That's all.
From this point on you are at factory state. If you connect to internet very likely Acer will send you an OTA update but it's up to you to install it.
Regards.

fast , accurate ! thanks a lot

but i have only image ...

Download from The official Acer site:
http://global-download.acer.com/Ste...0&BC=Acer&SC=&LC=en&OS=a09&FS=O02&Category=OS
Regards.
Sent from my A510 using Tapatalk 2

xdajuanmrodrigues said:
@Amidamaru7,
If you already have CWM installed then it's very easy.
1- Take the original (base) firmware, not the last one. Very likely the last one is not a complete firmware but an update to the original one.
2- Take the update.zip file and unzip it to a folder.
3- Go to folder "\META-INF\com\google\android"
4- Edit the updater-script and put a # as first character of first line. This will avoid this line to execute: #assert(getprop("ro.product.name") == "a510_...");
5- Zip all files again and name it update.zip.
6- Flash it with CWM.
7- When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right?
That's all.
From this point on you are at factory state. If you connect to internet very likely Acer will send you an OTA update but it's up to you to install it.
Regards.
Click to expand...
Click to collapse
I tried to get back to factory state , but i got an "instalation aborted" message every time that i tried
I downloaded the R28.RC02.WW.GEN1 from the site that you linked, unzipped , added "#" character to the first line at the update script file, rezipped and renamed to update.zip
I also copied the file to ext sd and internal sd
I'm currently at franken a700 with nothrills recovery

@ursur,
I would recommend:
- Unzip and zip with another application. Some times wthis could be a problem.
- Edit the script with a linux compatible editor like Notepad++, freeware, google it. Avoid Wordpad or other editors that insert line feeds of CR.
It works for me using internal or external SD.
Regards.

One Hint:
8- When CWM asked to avoid root say "NO".
Click to expand...
Click to collapse

What does it mean 'flash with cwm'?
IS it this command : fastboot flash recovery update.zip?
Sorry for stupid question.

Recovery verified failed
Hey guys,
i installed a stockrom from acer with your instructions and it was completly done. I had Nothrills 700 Franken before.
i just answerd this question : When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right? with YES because i wanted to keep cwm.
The tablet restarted normaly and when setting up acer told me that there is a update so i did the update.
Now the tablet restarted and i get the message : booting recovery kernel imag
and in the second line: Recovery verified fail...
in the middle of the screen you can see the acer logo.
WHAT CAN I DO NOW??? I can't reboot the tablet. Holding the power button get no impact. Shoud i wait till the battery is empyt and then?
I read smthg about fastboot and get a stock recovery. Is that a possibility? if yes, who will give me an instructions what i have to do.
Thx for your help.
But at the Moment i'm very desperate
P.S. Sorry for my bad english
---------- Post added at 12:53 PM ---------- Previous post was at 12:09 PM ----------
Benedikt_XVI said:
Hey guys,
i installed a stockrom from acer with your instructions and it was completly done. I had Nothrills 700 Franken before.
i just answerd this question : When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right? with YES because i wanted to keep cwm.
The tablet restarted normaly and when setting up acer told me that there is a update so i did the update.
Now the tablet restarted and i get the message : booting recovery kernel imag
and in the second line: Recovery verified fail...
in the middle of the screen you can see the acer logo.
WHAT CAN I DO NOW??? I can't reboot the tablet. Holding the power button get no impact. Shoud i wait till the battery is empyt and then?
I read smthg about fastboot and get a stock recovery. Is that a possibility? if yes, who will give me an instructions what i have to do.
Thx for your help.
But at the Moment i'm very desperate
P.S. Sorry for my bad english
Click to expand...
Click to collapse
I tried the resetbutton and now my tablet restarted normaly.
But when i do a reboot and try to get to the recovery i get the message like i described before.
Is it possible that i install now the cwm from nothrill with adb?or can i get a stock recovery and flash it with adb?
thx for your help

xdajuanmrodrigues said:
@Amidamaru87,
If you already have CWM installed then it's very easy.
1- Take the original (base) firmware, not the last one. Very likely the last one is not a complete firmware but an update to the original one.
2- Take the update.zip file and unzip it to a folder.
3- Go to folder "\META-INF\com\google\android"
4- Edit the updater-script and put a # as first character of first line. This will avoid this line to execute: #assert(getprop("ro.product.name") == "a510_...");
5- Zip all files again and name it update.zip.
6- Flash it with CWM.
7- When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right?
That's all.
From this point on you are at factory state. If you connect to internet very likely Acer will send you an OTA update but it's up to you to install it.
Regards.
Click to expand...
Click to collapse
Ok, about 2 months ago, I flashed to a Nothrills ROM and all. Then, I wanted to go back fully stock, and I did the same as you mentioned above.
Today, I tried updating my tab OTA and I am getting "Recovery verified failed..." error. Nothing that I can do. Mind you, I was on stock ROM and all, just that I was rooted.
Thanks.

maybe just root is a problem

I tried updating my tab OTA and I am getting "Recovery verified failed..." error. Nothing that I can do. Mind you, I was on stock ROM and all, just that I was rooted.
Click to expand...
Click to collapse
I tried to get back to factory state , but i got an "instalation aborted" message every time that i tried
Click to expand...
Click to collapse
Lock here : http://forum.xda-developers.com/showthread.php?t=2046832

for me it work but i'm stuck on the iconia tab logo ???!!!
help

look in my thread, my device also doesnt boot. Maybe the link in the thread will help you

ok i succed i just forgot to wipe data from cwm all good ... just waiting jellybean thanks

I'm happy you sorted it out.
Safest way to go back to factory is to load the original bootloader i.e. saying NO to step 7:
7- When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right?
Click to expand...
Click to collapse
There is a new CWM from Nothrills that is compatible with JB.
http://forum.xda-developers.com/showthread.php?t=1866378
Regards

Benedikt_XVI said:
Hey guys,
i installed a stockrom from acer with your instructions and it was completly done. I had Nothrills 700 Franken before.
i just answerd this question : When asked to avoid bootloader installation say "NO". This will restore the original bootloader and lock it again. You will not have CWM any more but I think this is what you want right? with YES because i wanted to keep cwm.
The tablet restarted normaly and when setting up acer told me that there is a update so i did the update.
Now the tablet restarted and i get the message : booting recovery kernel imag
and in the second line: Recovery verified fail...
in the middle of the screen you can see the acer logo.
WHAT CAN I DO NOW??? I can't reboot the tablet. Holding the power button get no impact. Shoud i wait till the battery is empyt and then?
I read smthg about fastboot and get a stock recovery. Is that a possibility? if yes, who will give me an instructions what i have to do.
Thx for your help.
But at the Moment i'm very desperate
P.S. Sorry for my bad english
---------- Post added at 12:53 PM ---------- Previous post was at 12:09 PM ----------
I tried the resetbutton and now my tablet restarted normaly.
But when i do a reboot and try to get to the recovery i get the message like i described before.
Is it possible that i install now the cwm from nothrill with adb?or can i get a stock recovery and flash it with adb?
thx for your help
Click to expand...
Click to collapse
with JB
With system powered off, press and hold ‘Power’ and ‘Vol -‘
b. When the system vibrates, release the ‘Power’ button.
c. When the system vibrates a second time, slide your finger from ‘Vol-‘ to ‘Vol+.”
d. When the system vibrates a third time, release that button.
edit: I have check.partition.size=[__prop_undefined__]
when I try to put the stock rom any ideas
thanks

Tutorial to backup to original firmware on A511
You have a Acer Iconia Tab A511 with e.g. A510 (Custom-)ROM without 2G/3G and you can not install the A511 firmware, cause Status 7 or Status 4 errors?
Deleting the line in the install script with the name of the device doesn't work? Using an other editor and 7zip for repacking is not the solution?
try this way

sortous said:
with JB
With system powered off, press and hold ‘Power’ and ‘Vol -‘
b. When the system vibrates, release the ‘Power’ button.
c. When the system vibrates a second time, slide your finger from ‘Vol-‘ to ‘Vol+.”
d. When the system vibrates a third time, release that button.
edit: I have check.partition.size=[__prop_undefined__]
when I try to put the stock rom any ideas
thanks
Click to expand...
Click to collapse
Me too.
Wasn't able to resolve it.

Deleted OS from OnePlus One

So I was trying to perform a simple factory reset in recover mode on my OnePlus One and accidentally erased the OS. I know I could simply download a ROM onto my SD card and install though recovery only my volume buttons don't work so I'm unable to boot into recovery that way. And when I tried to boot into recovery from my PC I get a "device not found error" I'm assuming because USB debugging is not enabled. PLEASE HELP!!!! Is there any other way to boot into recovery and/or install a ROM?

Try this tool: http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
May or may not work for you, it worked for me a while back.

Twrp or cm recovery? If twrp use otg pen drive with downloaded ROM and install via twrp.

drmuruga said:
Twrp or cm recovery? If twrp use otg pen drive with downloaded ROM and install via twrp.
Click to expand...
Click to collapse
Might be a redundant question but will this "pen drive" boot the phone into recovery or will I still have to figure out his to get it into recovery

GamerJesus said:
Try this tool: http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
May or may not work for you, it worked for me a while back.
Click to expand...
Click to collapse
In the instruct ructions it says to hold the volume up button along with the power button (which I can't do) is it okay to skip that step?

MrSquareBidness74 said:
Might be a redundant question but will this "pen drive" boot the phone into recovery or will I still have to figure out his to get it into recovery
Click to expand...
Click to collapse
Ha ha ha ,i know. If there is no os , when you switch on phone it will enter recovery only , he said volume buttons not working , but if power button eork , when he switch on phone it will enter recovery i think . If so he will do as i told..
---------- Post added at 12:17 PM ---------- Previous post was at 11:54 AM ----------
Pc identify only fastbootmode or adb on switch on position. If there is no os r, phone in recovery mode pc won't recognise . Are you in recovery or phone is not booting ?

When I boot the phone up it gets to the OnePlus screen and stays there

My moto G3 is stuck on the "warning, bootloader unlocked" page, please help !

My moto G3 is stuck on the "warning, bootloader unlocked" page, please help !
I recently rooted my Motorola Moto G3 and it worked.... ish, when I opened my phone from it being turned off I was greeted with the message telling me that it was super duper dangerous to root your phone and I could damage my phone, that normally goes as it is just a mandatory thing that they have to say, I waited for a while and it didn't go, I waited for a day and it didn't go. So I let it run out of charge and tried to boot it again, this didn't work, I was still seeing the same white screen with red and black writing. I then let it run out of charge and open it in fast boot mode by pressing the power button and volume down, this did work and from there I have managed to open the team win recovery project but whenever I do anything from then, it will go back to the error page and then will never load. I have even reset the phone to factory settings. If I hold the power button it will turn off the phone but very shortly after automatically turn itself back on to this same image.... please help!

How did you end up rooting it? Have you tried flashing a factory image?

If I were you, I would try to reflash stock firmware with factory reset

@Artyb52
hi, what did you do to Root ??
check these , if you have done evrything :
1) USB debugging enabled, allow OEM unlocking Enable ( developer options )
2) install ADB and fastboot. ( in PC)
3) Unlock bootloader in Fastboot mode .. (After unlocking did you PowerOn your phone, and check ? did it ON with out any problems? )
4) Installing a recovery , by following proper commands and choosing right version ..
5) flashing SuperSU with that Recovery.
If you have done everything Right, then Do onething.. Change CustomRecovery Version ( if on TWRP ) ,
else Goto Fastboot.. press POWER OFF, so that your phone gets SHUT DOWN, then On it normally ..
i have seen a problem where REBOOT function causes Bootloops..

i tried that and it didnt work :/
@nandakis4 shame it didn't work. Do you have any other tips, I would be really grateful

@Acetyloaceton how do you do that ? sorry for sounding like such a noob, i'm new to the game

l3ones said:
How did you end up rooting it? Have you tried flashing a factory image?
Click to expand...
Click to collapse
@13ones I tried flashing the TWRP image, is that different to the factory image ?

The same thing happened me when I rooted my phone. To fix it I downloaded cm 13 then placed it on internal storage and flashed it (and gapps) from twrp and it worked fine.

Acetyloaceton said:
If I were you, I would try to reflash stock firmware with factory reset
Click to expand...
Click to collapse
"Factory Reset" Doesn't reflash stock firmware, it just wipes /data /cache and internal storage.
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
Artyb52 said:
@13ones I tried flashing the TWRP image, is that different to the factory image ?
Click to expand...
Click to collapse
Yes, you'd need to download it from the stock firmware page and flash the whole thing through fastboot.

l3ones said:
"Factory Reset" Doesn't reflash stock firmware, it just wipes /data /cache and internal storage.
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
Yes, you'd need to download it from the stock firmware page and flash the whole thing through fastboot.
Click to expand...
Click to collapse
@l3ones i have tried this 2 times now, and i must be doing something wrong, i dont want to hassle you but could you walk me through the exact procedure needed to do this

Try this
Using adb sideload on twrp
1. Flash supersu 2.62, then
2. Flash supersu 2.65
Command : adb sideload supersu.xx.zip
In my case, it works.

Artyb52 said:
@l3ones i have tried this 2 times now, and i must be doing something wrong, i dont want to hassle you but could you walk me through the exact procedure needed to do this
Click to expand...
Click to collapse
If I'm not too late, sure. What model do you have?