Database Info

[Q] Honor 6 L02 stuck on WoPhone Logo (boot logo)

So, I got a honor 6 H60-L02 which wont (by any mean) normally boot. I tried Flashing required files (Cust, Recovery,System,Userdata, boot, Chache) via fastboot,
but it didn't work. I also tried the Mini Tool and followed the Unbrick option and I came up with nothing
The issue is that the (3 Buttons method) didn't work for me and I can't even get the phone to work in Recovery mode so that at least I can try wiping the system.
At the end of each attempt I'm stuck with WoPhone logo and that's it!!!
As a final attempt, I tried to flash numerous custom recovery images, but still, the phone wont enter the Recovery mode.
The phone was rooted and Miui rom was installed on it ( Recovery issue started then, the phone won't enter Recovery mode after installing Miui Rom)
Any suggestions before I start playing tennis with it?

einstien said:
So, I got a honor 6 H60-L02 which wont (by any mean) normally boot. I tried Flashing required files (Cust, Recovery,System,Userdata, boot, Chache) via fastboot,
but it didn't work. I also tried the Mini Tool and followed the Unbrick option and I came up with nothing
The issue is that the (3 Buttons method) didn't work for me and I can't even get the phone to work in Recovery mode so that at least I can try wiping the system.
At the end of each attempt I'm stuck with WoPhone logo and that's it!!!
As a final attempt, I tried to flash numerous custom recovery images, but still, the phone wont enter the Recovery mode.
The phone was rooted and Miui rom was installed on it ( Recovery issue started then, the phone won't enter Recovery mode after installing Miui Rom)
Any suggestions before I start playing tennis with it?
Click to expand...
Click to collapse
Whoa that's f'ed up man! What ur trying to say is ur phone never booted ever since u got it??

Its second hand not new man... .
Sent from my gigantic"iPhone" using Tapatalk

einstien said:
Its second hand not new man... .
Sent from my gigantic"iPhone" using Tapatalk
Click to expand...
Click to collapse
Maybe the phone is faulty? The phone should unbrick if u used multi tool properly.

shubham1120 said:
Maybe the phone is faulty? The phone should unbrick if u used multi tool properly.
Click to expand...
Click to collapse
Its a possibility ... Yet, the multi tool doesn't do anything special but to auto-flash certain files which you can flash manually. I was hoping to find a tool that formats partitions before flashing them.
Sent from my gigantic"iPhone" using Tapatalk

me too i tried every thing but nothing is work

Me too.

Honor 6 blocked on Logo
I have H60-L02 bloked on logo,i tried to install the original firmware using adb shell and dd. Unluckily the phone doesn't boot normally after the reboot.
Pressing the power button for a while lets the phone vibrate ones and appear logo but nothing else happens.
Pressing 3 buttons lets the phone come up with the honor-logo, but nothing more.
Pressing power + vol- and connected usb cable lets the phone come up with fastboot.
When the phone is in fastboot mode my computer recognizes it as "Android Phone - Android Sooner Single ADB Interface", but ADB doesn't show any devices. Fastboot works fine and is Unlocked.
Hisuite doesn`t recognize device...search drivers but nothing happens.
Unbricking the phone using fastboot (flash boot, cust, recovery and system) doesn't change anything.
Flashing the stock recovery, using a sd-card with dload folder and firmware and booting the phone with any button combination doesn't change anything (no installer, no recovery).
Flashing CWM and booting the phone with any button combination doesn't change anything (no recovery).
ADB doesn't show a device at any other point of booting
Any solution ?
---------- Post added at 01:01 PM ---------- Previous post was at 12:55 PM ----------
I have done with multi tool unbriked methode(boot,recovery,cust,cache,system,userdata) but nothing,not workin 3 button methode, and the device can't charge anymore

I solved my problem, see my post: http://forum.xda-developers.com/hono...6#post65673722

Sam Cro said:
I have H60-L02 bloked on logo,i tried to install the original firmware using adb shell and dd. Unluckily the phone doesn't boot normally after the reboot.
Pressing the power button for a while lets the phone vibrate ones and appear logo but nothing else happens.
Pressing 3 buttons lets the phone come up with the honor-logo, but nothing more.
Pressing power + vol- and connected usb cable lets the phone come up with fastboot.
When the phone is in fastboot mode my computer recognizes it as "Android Phone - Android Sooner Single ADB Interface", but ADB doesn't show any devices. Fastboot works fine and is Unlocked.
Hisuite doesn`t recognize device...search drivers but nothing happens.
Unbricking the phone using fastboot (flash boot, cust, recovery and system) doesn't change anything.
Flashing the stock recovery, using a sd-card with dload folder and firmware and booting the phone with any button combination doesn't change anything (no installer, no recovery).
Flashing CWM and booting the phone with any button combination doesn't change anything (no recovery).
ADB doesn't show a device at any other point of booting
Any solution ?
---------- Post added at 01:01 PM ---------- Previous post was at 12:55 PM ----------
I have done with multi tool unbriked methode(boot,recovery,cust,cache,system,userdata) but nothing,not workin 3 button methode, and the device can't charge anymore
Click to expand...
Click to collapse
the link is not working and my phone is stuck at the same screen after i tried to root it. the multi tool also does not find the phone even when its connected.
Vol +, vol down and power. Vol + and power and vol down and power makes it to come in same place. the logo. ( even when it connected to PC)..
Pls help...

http://forum.xda-developers.com/hon...-to-charge-t3329176/post66010697#post66010697

[Q&A] [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.6.x TeamWin Recovery Project 4/1

[Q&A] [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.6.x TeamWin Recovery Project 4/1
Q&A for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.6.x TeamWin Recovery Project 4/13
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.6.x TeamWin Recovery Project 4/13. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

920i, stuck in TWRP recovery and touch doesn't work.
I just followed this
What should I do now? Just wait for my battery to discharge then try again?

tiatmed said:
920i, stuck in TWRP recovery and touch doesn't work.
I just followed this
What should I do now? Just wait for my battery to discharge then try again?
Click to expand...
Click to collapse
Holding down the power button for 7 seconds should reboot your phone.

tiatmed said:
920i, stuck in TWRP recovery and touch doesn't work.
I just followed this
What should I do now? Just wait for my battery to discharge then try again?
Click to expand...
Click to collapse
Does updating your firmware work with the post TWRP image?

Japultra said:
Holding down the power button for 7 seconds should reboot your phone.
Click to expand...
Click to collapse
This didn't work for me. I had to go into download mode by holding down power button + home + vol down and flashed TWRP via odin.
bigbiff said:
Does updating your firmware work with the post TWRP image?
Click to expand...
Click to collapse
I'm on the AOD1 firmware and using stock recovery currently. Apparently flashify only allows 3 flashes per day so I'll wait until tomorrow then flash TWRP recovery.

Stock Recovery for SM-G920R4
I have the US Cellular S6. Where can I find the stock recovery image? Thanks in advance

Had the deep sleep problem on my 920F and I just reflashed the root to solve it.. It will reflash the stock recovery when it is done hence remove twrp

Is there a working twrp for the egde

help me
Hello, I have a problem my s6 and unlock the lock on the recovery I can not help me redemare
---------- Post added at 07:47 PM ---------- Previous post was at 07:24 PM ----------
Hello, I have a problem my s6 and unlock the lock on the recovery I can not help me redemare

SM-G925I, Brazil (VIVO) firmware
My device is SM-G925I,
Brazil (VIVO) firmware
This is what worked for me:
1- Flash S6EdgeTWRP.tar from Odin 3.10.6
2- Install SUpersu v2.37.zip from TWRP.
3- Update supersu from the Play Store
4- Flash the stock recovery.img file (after downloading from sammobile and extracting the recovery.img file) with the Flashify app.
5- Extract the recovery.img from the TWRP tar file and flash it from the Flashify app.
Now my device is deep sleeping.
The deep sleep issue seems to be when you flash TWRP from ODIN. You have to flash the TWRP recovery.img file from Flashify to get deep sleep working.
I have not flashed any deep sleep fix.
Hope this helps someone.
---------- Post added at 02:14 PM ---------- Previous post was at 02:10 PM ----------
ken2802 said:
Is there a working twrp for the egde
Click to expand...
Click to collapse
Yes.
downloadandroidrom.com/file/GalaxyS6Edge/S6EdgeTWRP.tar
This one worked for me.

Samsung S6
So... I have installed TWRP, but I am a bit confused how do you reboot it into recovery mode without the TWRP app. I have tried it all with power bottom, volume,etc, but not sucessful.
Please can someone help me cheers!

guerreironexus said:
So... I have installed TWRP, but I am a bit confused how do you reboot it into recovery mode without the TWRP app. I have tried it all with power bottom, volume,etc, but not sucessful.
Please can someone help me cheers!
Click to expand...
Click to collapse
If TWRP is correctly installed, all you need to do is:
- turn off the phone
- hold volume up, home and power buttons until TWRP opens.

bpaludo said:
If TWRP is correctly installed, all you need to do is:
- turn off the phone
- hold volume up, home and power buttons until TWRP opens.
Click to expand...
Click to collapse
nop, it always goes to the samsung recovery mode. However if I do it thru the TWRP app it works perfectly
btw... I have got the samsung S6
---------- Post added at 09:01 PM ---------- Previous post was at 08:50 PM ----------
got it!! hehe cheers

Installed twrp, all looked good but s6 boots into screen saying it did not start correctly. I tried factory reset, safe mode, nothing now in Odin mode with screen stuck on downloading, do not turn off targetvd
for 45 minutes????
Sent from my QTAQZ3 using XDA Free mobile app

chesterx1 said:
Installed twrp, all looked good but s6 boots into screen saying it did not start correctly. I tried factory reset, safe mode, nothing now in Odin mode with screen stuck on downloading, do not turn off targetvd
for 45 minutes????
Sent from my QTAQZ3 using XDA Free mobile app
Click to expand...
Click to collapse
Sometimes you need to restart download mode because something gets screwy. Also make sure you are using the latest Odin.

twrp 2.8.6.2 otg not working
Hi all, i intalled twrp version 2.8.6.2 and usb otg not working, any suggestion? Thank's in advance.

guglidm said:
Hi all, i intalled twrp version 2.8.6.2 and usb otg not working, any suggestion? Thank's in advance.
Click to expand...
Click to collapse
Maybe it's your USB because OTG is working for me I use it all the time.

otg
maxal said:
Maybe it's your USB because OTG is working for me I use it all the time.
Click to expand...
Click to collapse
only in recovery not working :| i try paste the file with file manager and otg work...in recovery mode i can't select mount usb otg

guglidm said:
only in recovery not working :| i try paste the file with file manager and otg work...in recovery mode i can't select mount usb otg
Click to expand...
Click to collapse
I can confirm OTG is working for me in recovery, this is my USB http://www.amazon.co.uk/gp/product/B00HVZ90OO?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 which I use to backup too and flash from.

otg
thank's but i tried varius usb device, when i go in recovery mode, i can't select mount usb otg, when i press usb otg don't appears nothing

My moto G3 is stuck on the "warning, bootloader unlocked" page, please help !

My moto G3 is stuck on the "warning, bootloader unlocked" page, please help !
I recently rooted my Motorola Moto G3 and it worked.... ish, when I opened my phone from it being turned off I was greeted with the message telling me that it was super duper dangerous to root your phone and I could damage my phone, that normally goes as it is just a mandatory thing that they have to say, I waited for a while and it didn't go, I waited for a day and it didn't go. So I let it run out of charge and tried to boot it again, this didn't work, I was still seeing the same white screen with red and black writing. I then let it run out of charge and open it in fast boot mode by pressing the power button and volume down, this did work and from there I have managed to open the team win recovery project but whenever I do anything from then, it will go back to the error page and then will never load. I have even reset the phone to factory settings. If I hold the power button it will turn off the phone but very shortly after automatically turn itself back on to this same image.... please help!

How did you end up rooting it? Have you tried flashing a factory image?

If I were you, I would try to reflash stock firmware with factory reset

@Artyb52
hi, what did you do to Root ??
check these , if you have done evrything :
1) USB debugging enabled, allow OEM unlocking Enable ( developer options )
2) install ADB and fastboot. ( in PC)
3) Unlock bootloader in Fastboot mode .. (After unlocking did you PowerOn your phone, and check ? did it ON with out any problems? )
4) Installing a recovery , by following proper commands and choosing right version ..
5) flashing SuperSU with that Recovery.
If you have done everything Right, then Do onething.. Change CustomRecovery Version ( if on TWRP ) ,
else Goto Fastboot.. press POWER OFF, so that your phone gets SHUT DOWN, then On it normally ..
i have seen a problem where REBOOT function causes Bootloops..

i tried that and it didnt work :/
@nandakis4 shame it didn't work. Do you have any other tips, I would be really grateful

@Acetyloaceton how do you do that ? sorry for sounding like such a noob, i'm new to the game

l3ones said:
How did you end up rooting it? Have you tried flashing a factory image?
Click to expand...
Click to collapse
@13ones I tried flashing the TWRP image, is that different to the factory image ?

The same thing happened me when I rooted my phone. To fix it I downloaded cm 13 then placed it on internal storage and flashed it (and gapps) from twrp and it worked fine.

Acetyloaceton said:
If I were you, I would try to reflash stock firmware with factory reset
Click to expand...
Click to collapse
"Factory Reset" Doesn't reflash stock firmware, it just wipes /data /cache and internal storage.
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
Artyb52 said:
@13ones I tried flashing the TWRP image, is that different to the factory image ?
Click to expand...
Click to collapse
Yes, you'd need to download it from the stock firmware page and flash the whole thing through fastboot.

l3ones said:
"Factory Reset" Doesn't reflash stock firmware, it just wipes /data /cache and internal storage.
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
Yes, you'd need to download it from the stock firmware page and flash the whole thing through fastboot.
Click to expand...
Click to collapse
@l3ones i have tried this 2 times now, and i must be doing something wrong, i dont want to hassle you but could you walk me through the exact procedure needed to do this

Try this
Using adb sideload on twrp
1. Flash supersu 2.62, then
2. Flash supersu 2.65
Command : adb sideload supersu.xx.zip
In my case, it works.

Artyb52 said:
@l3ones i have tried this 2 times now, and i must be doing something wrong, i dont want to hassle you but could you walk me through the exact procedure needed to do this
Click to expand...
Click to collapse
If I'm not too late, sure. What model do you have?

Twrp and Xiaomi.Eu Error

So i tried to install the xiaomi.eu rom on my MiMix 2s but something went terribly wrong. First of all i got Twrp to work and installed the rom. After pressing reboot though the phone just rebooted into fastboot. Now i cant get back into Twrp neither can i reboot to the System. Everything just gets me back to fastboot.
When i try to get back into the recovery, after typing "fastboot boot 'recovery' " i get an Error: "FAILED (remote: Failed to load/authenticate boot image: 00000050)"
I also tried to get the global rom back with the MiFlash tool but it seems the fastboot rom download page is currently down.
Any help would be greatly appreciated.

Try to flash the recovery instead of just booting it(I don't get why people are always only booting in recovery, so useless) did you format everything before flashing xiaomi.eu rom?

Flatric said:
Try to flash the recovery instead of just booting it(I don't get why people are always only booting in recovery, so useless) did you format everything before flashing xiaomi.eu rom?
Click to expand...
Click to collapse
I am doing that first but in the guide in this Forum it tells you to boot the recovery. Also "fastboot reboot recovery" does not work(fastboot: usage: unknown reboot target recovery) and i dont know any other way to get into the recovery on that phone.

neeboq said:
I am doing that first but in the guide in this Forum it tells you to boot the recovery. Also "fastboot reboot recovery" does not work(fastboot: usage: unknown reboot target recovery) and i dont know any other way to get into the recovery on that phone.
Click to expand...
Click to collapse
Just type fastboot flash recovery [name_of_recovery.img].img (place the recovery.img in the correct folder on your computer of course). You can boot in recovery by holding powerbutton and louder button when the device is powered of. Did you flash the correct xiaomi.eu rom for our device?

Flatric said:
Just type fastboot flash recovery [name_of_recovery.img].img (place the recovery.img in the correct folder on your computer of course). You can boot in recovery by holding powerbutton and louder button when the device is powered of. Did you flash the correct xiaomi.eu rom for our device?
Click to expand...
Click to collapse
Ok so booting into the recovery from the phone doesn't work Right now because i cannot shut the phone down. Every time i longpress the powerbutton or the powerbutton + volume button i just get a Restart into fastboot.
Aaand i just checked and idiot me downloaded the wrong Xiaomi.eu Rom .
It is just really unfortunate, that the official MiUi download Servers are offline and that i can't even get the official Version now.

neeboq said:
Ok so booting into the recovery from the phone doesn't work Right now because i cannot shut the phone down. Every time i longpress the powerbutton or the powerbutton + volume button i just get a Restart into fastboot.
Aaand i just checked and idiot me downloaded the wrong Xiaomi.eu Rom .
It is just really unfortunate, that the official MiUi download Servers are offline and that i can't even get the official Version now.
Click to expand...
Click to collapse
Well that means you most likely ****ed up the partitions on your phone... and when flashing the recovery doesn't work you have to wait for miui download servers(at least that's my point if knowledge)
---------- Post added at 20:48 ---------- Previous post was at 20:46 ----------
neeboq said:
Ok so booting into the recovery from the phone doesn't work Right now because i cannot shut the phone down. Every time i longpress the powerbutton or the powerbutton + volume button i just get a Restart into fastboot.
Aaand i just checked and idiot me downloaded the wrong Xiaomi.eu Rom .
It is just really unfortunate, that the official MiUi download Servers are offline and that i can't even get the official Version now.
Click to expand...
Click to collapse
Nevermind I got your back hehe http://en.miui.com/thread-2804733-1-1.html scroll a bit and you find a workaround to get the files just tested it and I can download the necessary roms
---------- Post added at 20:56 ---------- Previous post was at 20:48 ----------
Let me know if you were succesfull afterwards

Flatric said:
Well that means you most likely ****ed up the partitions on your phone... and when flashing the recovery doesn't work you have to wait for miui download servers(at least that's my point if knowledge)
---------- Post added at 20:48 ---------- Previous post was at 20:46 ----------
Nevermind I got your back hehe http://en.miui.com/thread-2804733-1-1.html scroll a bit and you find a workaround to get the files just tested it and I can download the necessary roms
Click to expand...
Click to collapse
Well this is Kind of embarrassing but after leaving the Phone unattended for ~10 minutes i found it turned off. I tried to get into the recovery with the power button + volume button and it worked. I am now downloading the(hopefully) Right Version of Xiaomi.eu and will try to install that.
Thank you so much for your help

neeboq said:
Well this is Kind of embarrassing but after leaving the Phone unattended for ~10 minutes i found it turned off. I tried to get into the recovery with the power button + volume button and it worked. I am now downloading the(hopefully) Right Version of Xiaomi.eu and will try to install that.
Thank you so much for your help
Click to expand...
Click to collapse
Good luck, if you got more questions just ask them

Unable to install miui eu beta zip rom
Hello, i hope you can help me out. I just unlocked Mix2s and it was a hard time to flash twrp on it. Twrp from miui eu forum website is no good i think. Very laggy and orange? So i succeeded flashing twrp v7 from xda. But when i want to install miui eu zip rom 8.7.19 it just won't happen. It seems the phone or twrp does not accept the rom. And it's the polaris rom. I just don't get it.
After unlocking i first flashed the fastboot rom (tgz) miui 10 (phone was on 9.6), but i think that was not necessary. After that i flashed twrp and formatted, because i wanted a clean flash of the eu rom. Was formatting a mistake?
Is my phone missing a partition / file now?
It just won't install the zip rom.
Any suggestions? Thanks!

Help! OP6 stuck in 'the boot loader is unlock and software... etc' screen!

So i tried flashing blu-spark twrp.. and magisk up until the moment i had to reboot after installing magisk... now the phone is stuck in this screen i dont know what do, help

What screen? Pictures would help others give feedback and information to assist you. I have yet to update to Android Pie because I am waiting for an official TWRP release myself and I like to gather as much information as I can before I make a leap into the next update

dgunn said:
What screen? Pictures would help others give feedback and information to assist you. I have yet to update to Android Pie because I am waiting for an official TWRP release myself and I like to gather as much information as I can before I make a leap into the next update
Click to expand...
Click to collapse
thanks, sorry dont have another phone to take a picture of this but its basically the screen we get when first booting that shows the device has an unlocked bootloader... the 'warning screen'
edit: **** the link was wrong
edit2: this one but in our device http://i.imgur.com/88NcI2K.jpg

+1 same procedure and same problem.
No connection to PC possible and no "reset-buttons" work.
---------- Post added at 11:18 AM ---------- Previous post was at 10:52 AM ----------
Okay, I managed to get my phone booting up again.
1. Turn off phone by holding just the power-button
2. Boot phone into fastboot-mode by holding vol-up and power-button
3. In Fastboot-mode connect phone to pc
4. get stock OxygenOS-boot.img (Stock boot-recovery images) from here
5. flash the boot.img via fastboot: "fastboot flash boot stockboot.img"
After that my phone booted up again. TWRP is removed through that procedure. I will wait a while before testing it again.

Got the same as you. Booted back into Blu Spark TWRP, wiped Dalvik and cache and then selected the other boot partition. Booted up for me.

lal000r said:
+1 same procedure and same problem.
No connection to PC possible and no "reset-buttons" work.
---------- Post added at 11:18 AM ---------- Previous post was at 10:52 AM ----------
Okay, I managed to get my phone booting up again.
1. Turn off phone by holding just the power-button
2. Boot phone into fastboot-mode by holding vol-up and power-button
3. In Fastboot-mode connect phone to pc
4. get stock OxygenOS-boot.img (Stock boot-recovery images) from here
5. flash the boot.img via fastboot: "fastboot flash boot stockboot.img"
After that my phone booted up again. TWRP is removed through that procedure. I will wait a while before testing it again.
Click to expand...
Click to collapse
Did this wipe anything when you flashed the stockboot.img? Just data or internal too?
ptoner said:
Got the same as you. Booted back into Blu Spark TWRP, wiped Dalvik and cache and then selected the other boot partition. Booted up for me.
Click to expand...
Click to collapse
Sorry, can you clarify your last bit about selecting the other boot?

habylab said:
Did this wipe anything when you flashed the stockboot.img? Just data or internal too?
Nothing was wiped. All data remain in place.
Click to expand...
Click to collapse