hi all, i was just wondering, will OCing my captivate to 1.6 Ghz damage the CPU?
thanks!
stewi21 said:
hi all, i was just wondering, will OCing my captivate to 1.6 Ghz damage the CPU?
thanks!
Click to expand...
Click to collapse
Couple of things for you:
First, I doubt your device will run stable at 1.6 GHz. Most Galaxy S-type devices won't run stable above 1.4 GHz, and while some do, only a very lucky few can run at 1.6 GHz.
Second, yes, you can damage your CPU doing that. Higher clock speed = more heat generated & more time at higher voltages. That means more chance of doing physical hardware damage to your device.
That being said... you are *probably* not likely to do harm to your device if you overclock to 1.6 (and it manages to be stable) and you aren't running benchmarks 24/7.
I think the real question for you, is why would you want to run your device that fast? If you want high benchmark scores to impress your friends, just cheat Quadrant, way easier, and less chance of causing problems. If your device is so unresponsive at it's current speed, then find a different ROM/software setup.
1.6 GHz should never really be necessary.
oh okay, it hasnt actually arrived yet, i was thinking it would help running games meant for dual core procs.
thanks for the reply!
stewi21 said:
oh okay, it hasnt actually arrived yet, i was thinking it would help running games meant for dual core procs.
thanks for the reply!
Click to expand...
Click to collapse
Take a look at Chainfire3d with the Nvidia module.
Long story short, all of the current "dual core" phones are running Tegra2. But Tegra2 GPU <= Hummingbird GPU.
Problem is, games optimized for the Tegra will have a harder time running on our PowerVR. Not because of graphics horsepower, but because of specific optimization done by the programmers.
Chainfire's driver deal should help with that, in fact there is a thread floating around here somewhere with all the files you need.
PS Don't worry about those dual cores phones beating up on your little Captivate. Once you get it rooted, loaded up with a custom ROM and kernel, and running Gingerbread, I think you'll find none of the competition comes close...
I tried 1.6 ghz once and it was like insta-freeze. I'm very stable at 1.4 though.
Samsung Captivate running Paragon RC6 with 1.4ghz kernel.
Sent from XDA android app.
So I rooted my Droid X2 and installed Set CPU. I had problems running set CPU, I couldn't use the drop down menu for setting CPU governors, I also couldn't over clock my CPU, just under clock. Does set CPU work with the nvidia tegra 2 dual core processor in the X2? If not, which app will let me overclock and change CPU governors?
You have to have a custom kernel that allows overclocking.
lowandbehold said:
You have to have a custom kernel that allows overclocking.
Click to expand...
Click to collapse
I'm really new to Android, i've been using iOS for years, and finally jumped the fence. I just rooted my Droid X2, used Titanium Backup Pro to freeze all the bloated apps, and I wanted to get more control of my CPU, as well as overclock a little. I thought I could just install SetCPU and I would be able to Overclock.
So in order to have a custom kernel I would have to install a custom ROM? Such as Cyanogenmod? As I said, I am pretty new to Android, but if I am correct, Cyanogenmod is not available yet for the Droid X2 is it? Are there any other custom ROMs that are available or would work with my X2?
Is it really even all that necessary to overclock what is already a pretty powerful device? Nvidia Tegra 2 dual-core processor is powerful in its stock form isn't it? I would almost think I would gain more by dialing the CPU down at certain times, at least I would gain battery life. I think I am able to set up profiles with SetCPU without having a custom kernel, right?
This is a useless app made by Vietnamese people (I'm Vietnamese). It cannot overclock which many people mistakenly believe, and it only has the task of limiting the CPU speed, the CPU speed is managed by the OS and limiting it is a bad way because no matter what task it does it will be slowed down. When idle the CPU will automatically reduce its voltage and speed by OS. Any process no matter how big or small with high CPU speed it will be processed very fast even with small tasks that are reported not to use up CPU but it will still be faster than a slower CPU. Kernel Auditor is also useless.
it's not you install a custom kernel to manage cpu to overclock by some app but you're going to overclock into kernel using a custom kernel
Hi guys.
I wanted to ask you something, because in our sl i9003 is the maximum possible overclock 1300 mhz?
The Artex-A8 processor is not it?
It should be a very powerful processor, but even though I've always overclocchi various lag to 1.3, with any rom.
And my device has no flaws ..
So, back to the main question .. because the maximum overclock is only 1.3?
Now I'm using the rom with the look dell's3 and formatted EXT4 but is slow and full of lag .. Help!
Thanks.
I'm wrong or sI9000 can be overclocked more with the same cpu?
davibs said:
Hi guys.
I wanted to ask you something, because in our sl i9003 is the maximum possible overclock 1300 mhz?
The Artex-A8 processor is not it?
It should be a very powerful processor, but even though I've always overclocchi various lag to 1.3, with any rom.
And my device has no flaws ..
So, back to the main question .. because the maximum overclock is only 1.3?
Now I'm using the rom with the look dell's3 and formatted EXT4 but is slow and full of lag .. Help!
Thanks.
I'm wrong or sI9000 can be overclocked more with the same cpu?
Click to expand...
Click to collapse
are u confused in between i9000 or i9003 phone?
Max overclock i9000 - 1.6ghz (i think)
Max overclock i9003 - 1.38ghz
vishal24387 said:
are u confused in between i9000 or i9003 phone?
Max overclock i9000 - 1.6ghz (i think)
Max overclock i9003 - 1.38ghz
Click to expand...
Click to collapse
No , he would be know why for our phone the max overclock is 1.38 ghz.. I would it know to..
Sent from my GT-I9003 using XDA
Our Max is 1.45(I think can't rmb). Each chip has different oc capabilities, my g3 could oc from 667mhz to 1.4ghz with no problems .
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
Could so anyone develop a kernel with 1.45 ghz ??
Sent from my GT-I9003 using XDA
redflash52 said:
Could so anyone develop a kernel with 1.45 ghz ??
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
As I said I don't rmb clearly, but its in 1.4-1.45 ghz
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
Well, you can easly push your phone at 1500MHz (BCK kernel feature: Evolved sysfs interface for variable overclock or underclock), but the phone is not usable. I tried once to slowly change the frequency to see my limit and @1400MHz the phone became unusable.
Other than being unstable because, quoting XDA_Bam, "Anything more than 10% higher than the highest stock frequency is likely to be unstable", I think the voltage set for the 5th OPP is too low for anything higher than 1300MHz (maybe I'm wrong).
Proof? here.
Actually, this is "fake". To take this screenshot I had first disabled the 5th OPP, then I changed its frequency so that CPU Spy showed 1500MHz even though I wasn't really using it. The time spent at that frequency was actually the time the CPU spent at 1200MHz before I had disabled the 5th OPP
I did that to show you that it's actually possible to (easly) change the max frequency to anything higher 1380MHz.
EDIT:
And BTW devs are continuosly improving this device, we were first limited to 1100MHz, now some phones are stable at 1300MHz. Remember that our cousing (I9000) is older and has a huge community.
EDIT 2:
"I'm wrong or sI9000 can be overclocked more with the same cpu?" => "I'm wrong or sI9000 can be overclocked more with a totally different cpu?"
vishal24387 said:
are u confused in between i9000 or i9003 phone?
Max overclock i9000 - 1.6ghz (i think)
Max overclock i9003 - 1.38ghz
Click to expand...
Click to collapse
EDIT: -Looks like i am wrong too?
davibs said:
I'm wrong or sI9000 can be overclocked more with the same cpu?
Click to expand...
Click to collapse
You are wrong: the CPUs are different
i9003 has TI OMAP 3630 1GHz and i9000 has Samsung S5PC110 1GHz (code-named "Hummingbird")
Cortex A8 is just instructions and specifications for CPU. It's like DX10 for GPU. You can say Nvidia XXX card supports DX10 and AMD YYY supports it, why clocks for these cards and overclock potential are different?
I think the cpu of the i9000 is wors then the from i9003 so why is the i9000 overclocked to 50% and in our is it only 35%?
Cuold we not work on an overclock like 1.45 ghz for our phone ? Would it be unstable or is it because we need developers that can make it stable?
Sent from my GT-I9003 using XDA
redflash52 said:
I think the cpu of the i9000 is wors then the from i9003 so why is the i9000 overclocked to 50% and in our is it only 35%?
Cuold we not work on an overclock like 1.45 ghz for our phone ? Would it be unstable or is it because we need developers that can make it stable?
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
But can anybody tell me that whats the use of such higher OC (1.45ghz) when u can do same stuffs smoothly on 1.2 ghz easily??? Also OC looks very attractive feature but in my opinioin its a deadly battery killer feature. OC upto 1.35 ghz is more than sufficient (I am satisfied with 1ghz max with superb performance & good battery backup).
Instead of wasting time on overclocking developers should work on overclocking gpu, kernel 3.0 or video codec, video recording in cm7, cm9, miui, aosp roms. Because for now thats a big problem for our phone.
vishal24387 said:
But can anybody tell me that whats the use of such higher OC (1.45ghz) when u can do same stuffs smoothly on 1.2 ghz easily??? Also OC looks very attractive feature but in my opinioin its a deadly battery killer feature. OC upto 1.35 ghz is more than sufficient (I am satisfied with 1ghz max with superb performance & good battery backup).
Instead of wasting time on overclocking developers should work on overclocking gpu, kernel 3.0 or video codec, video recording in cm7, cm9, miui, aosp roms. Because for now thats a big problem for our phone.
Click to expand...
Click to collapse
I am with you, we reached the limits of "smoothness" really (On stable roms, we shouldn't blame hardware when using buggy or incompletete roms or even stupid samsung roms.)
It would be better if devs focus on the GPU.
redflash52 said:
I think the cpu of the i9000 is wors then the from i9003 so why is the i9000 overclocked to 50% and in our is it only 35%?
Could we not work on an overclock like 1.45 ghz for our phone ? Would it be unstable or is it because we need developers that can make it stable?
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
Remember when OCing just happened on our device? we were limited to 1080 Ghz, then to 1100 Ghz, then to 1200 Ghz/1300 Ghz, and now 1380 Ghz, devs will always figure out a way to squeeze more power and keep it stable, it needs time and effort.
The Galaxy S has a different CPU (That has lower OC potential then ours theoretically if i remember correctly) but has a bigger number of developers, it was released in 2010, our device was released in 2011 so it is kinda new.
vishal24387 said:
But can anybody tell me that whats the use of such higher OC (1.45ghz) when u can do same stuffs smoothly on 1.2 ghz easily??? Also OC looks very attractive feature but in my opinioin its a deadly battery killer feature. OC upto 1.35 ghz is more than sufficient (I am satisfied with 1ghz max with superb performance & good battery backup).
Instead of wasting time on overclocking developers should work on overclocking gpu, kernel 3.0 or video codec, video recording in cm7, cm9, miui, aosp roms. Because for now thats a big problem for our phone.
Click to expand...
Click to collapse
Yes of cours but some developers can't fix this bugs.. But maybe they are able to overclock the phone (like uc team) and i think it's not a battery killer.. If i have battery problems i buy for 10 € a new battery.. Some games and if i have 2 apps open the phon is luggy.. Maybe with an haiey overclock it will be smoother
Sent from my GT-I9003 using XDA
Remember guys, even if you OC the CPU, there will always be the weight of our outdated GPU dragging us down. Even if we OC to 1.45Ghz, you will always experience little bits of lag due to our PowerVR530. If I compare my friend's stock I9000 (No Mods, No Root, No OC:1Ghz) to my I9003 (with OC 1.38Ghz). My friend's I9000 will always be smoother due to both an advanced CPU and GPU.
FeelLikeASir said:
Remember guys, even if you OC the CPU, there will always be the weight of our outdated GPU dragging us down. Even if we OC to 1.45Ghz, you will always experience little bits of lag due to our PowerVR530. If I compare my friend's stock I9000 (No Mods, No Root, No OC:1Ghz) to my I9003 (with OC 1.38Ghz). My friend's I9000 will always be smoother due to both an advanced CPU and GPU.
Click to expand...
Click to collapse
Only their GPU is superior..
If someone could OC the gpu, we can probably reach their performance.
Skander1998 said:
Only their GPU is superior..
If someone could OC the gpu, we can probably reach their performance.
Click to expand...
Click to collapse
The uc team has tried but it seems the gpu frequency is locked
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
bscraze said:
The uc team has tried but it seems the gpu frequency is locked
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
Click to expand...
Click to collapse
Nope
http://forum.xda-developers.com/showthread.php?t=1451218&highlight=gpu+overclock
V9:
-Performace gpu and test overclocking to 300Mhz.
-Apply patch swa sources.(Many thanks to xda_bam)
-fix some small fix codes.
-Add vurrutCWM with many addons
Skander1998 said:
Nope
http://forum.xda-developers.com/showthread.php?t=1451218&highlight=gpu+overclock
V9:
-Performace gpu and test overclocking to 300Mhz.
-Apply patch swa sources.(Many thanks to xda_bam)
-fix some small fix codes.
-Add vurrutCWM with many addons
Click to expand...
Click to collapse
Yes as they said they're testing, they themselves said there is no way they can confirm its working
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
bscraze said:
Yes as they said they're testing, they themselves said there is no way they can confirm its working
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
Click to expand...
Click to collapse
But in the next version 9.1 they stated that they lowered the OC, (Still OCed) and this is the latest working version.
V9.1:
-Fix problems in recovery.
-Reduce overclock gpu to 220Mhz.
-Voltage ajustement.
hi all,
i want to root and overclock my TF300T
for the overclocking:
-Can i use setcpu ? What other tool is good for OC ?
- Do i need a Costum ROM for overclocking to 1.5Ghz (MAX!)
-Will the performance be a lot better ? or just better ? or no diffrence ?
-What is the highest possible OC ?
Thank you
If you are on ICS you can over clock to 1.5 no problem. I don't know about Setcpu on ICS, but I do know EzOverclock works.
If you upgraded to Jellybean, I don't know of anyway to overclock as of yet. EzOverclock won't work on Jellybean and reportedly causes boot loops. I tried setcpu on my Jellybean Tf300 and found the CPU to be maxed at 1.3.
Sent from my Galaxy Nexus using Tapatalk 2
danomat1073 said:
If you are on ICS you can over clock to 1.5 no problem. I don't know about Setcpu on ICS, but I do know EzOverclock works.
If you upgraded to Jellybean, I don't know of anyway to overclock as of yet. EzOverclock won't work on Jellybean and reportedly causes boot loops. I tried setcpu on my Jellybean Tf300 and found the CPU to be maxed at 1.3.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok thank you, can i look somewhere to find out when EzOverclock is compatible with JB ?
Thank you
farmtool33 said:
-Will the performance be a lot better ? or just better ? or no diffrence ?
Click to expand...
Click to collapse
It really depends on how you use the tablet, and where your bottleneck is. My feel is that I/O is the biggest bottleneck on the ASUS pads and the effects are felt across the board. I believe ASUS is working on a fix, though. Fingers crossed.
I/O notwithstanding, day-to-day tasks like email and web browsing don't need a 1 Ghz. Even video playback won't be affected by the difference between 1.2 Ghz (the ASUS performance mode) and 1.5 Ghz (typical max OC). Rendering graphics, I'm not sure how much is offloaded to the GPU, so games or graphic heavy applications may be where you'll see the most gains.
EZoverclock don't work on JB it will keeps restarting your tablet when EZoverclock starts.
And other apps work but can only be set to 1.3 so no overclock on JB with this kernel.
I think in graphically intense applications, such as games, would offer the most notable difference even with gpu offloading since not all instructions are graphics related. That being said just know that battery life will take a hit.
Remember...... as of now EzOverclock will not work in Jellybean.....
Here is a link
http://forum.xda-developers.com/showthread.php?t=1526311
[APP] - EZOverClock to 1.6 ghz
Sent from my Galaxy Nexus using Tapatalk 2
Hello, I just got a HTC One S and I have installed the Viper rom and the Ville-Z Kernel. BLACKOUT Edition. I used the October 23rd edition and it included GPU Overclocking. I keep my cpu at stock levels but is my phone's life going to be shortened by the GPU overclocking? I don't see anywhere to edit the settings for the GPU. Should I reflash the kernel and disable this?
Yes, the phones life will decrease. This phone is powerful as is, don't overclock even further.
Sent from my locked, tampered ville