So I rooted my Droid X2 and installed Set CPU. I had problems running set CPU, I couldn't use the drop down menu for setting CPU governors, I also couldn't over clock my CPU, just under clock. Does set CPU work with the nvidia tegra 2 dual core processor in the X2? If not, which app will let me overclock and change CPU governors?
You have to have a custom kernel that allows overclocking.
lowandbehold said:
You have to have a custom kernel that allows overclocking.
Click to expand...
Click to collapse
I'm really new to Android, i've been using iOS for years, and finally jumped the fence. I just rooted my Droid X2, used Titanium Backup Pro to freeze all the bloated apps, and I wanted to get more control of my CPU, as well as overclock a little. I thought I could just install SetCPU and I would be able to Overclock.
So in order to have a custom kernel I would have to install a custom ROM? Such as Cyanogenmod? As I said, I am pretty new to Android, but if I am correct, Cyanogenmod is not available yet for the Droid X2 is it? Are there any other custom ROMs that are available or would work with my X2?
Is it really even all that necessary to overclock what is already a pretty powerful device? Nvidia Tegra 2 dual-core processor is powerful in its stock form isn't it? I would almost think I would gain more by dialing the CPU down at certain times, at least I would gain battery life. I think I am able to set up profiles with SetCPU without having a custom kernel, right?
This is a useless app made by Vietnamese people (I'm Vietnamese). It cannot overclock which many people mistakenly believe, and it only has the task of limiting the CPU speed, the CPU speed is managed by the OS and limiting it is a bad way because no matter what task it does it will be slowed down. When idle the CPU will automatically reduce its voltage and speed by OS. Any process no matter how big or small with high CPU speed it will be processed very fast even with small tasks that are reported not to use up CPU but it will still be faster than a slower CPU. Kernel Auditor is also useless.
it's not you install a custom kernel to manage cpu to overclock by some app but you're going to overclock into kernel using a custom kernel
Related
OK guys. After much searching i've just become confused as to which is the best overclock app/ROM for the HTC sensation z710e. I used SetCPU but it couldn't actually take my processors above 1.188GHZ and I tried the sense-o-maniac ROM and also the android revolution 6.0.3 ROM, both of which say the processors are overclocked to 1.5GHZ but there is absolutely no difference to me, no they are not slower, and I just want a clear straight up ROM or app that OVERclocks.
Thanks,
Sensation lover
I under clocked my cpu to 1 ghz and I see no difference in speed.... From 1.2 to 1.5 its 20% increase in cpu speed.... Speed of the phone doesn't depend on cpu alone... So thats around 7-10% increase in speed overall (because there is gpu, ROM, sd card, memory)... And thats maybe... Do you really think you can see 7% in speed? Try some synthetic cpu benchmark with 1.2 and 1.5 and only then will you see....
This is my five cents ;-)
Sent from my HTC Sensation XE with Beats Audio using xda premium
Well the app that controls the CPU clocking is limited in what it can do by the Kernel you're running.
If you're Kernel only supports 1.18 Ghz, Set CPU can't do anything about it.
So you need a Kernel that supports overclocking. The Kernel also controls what kind of governors who can put on the CPU (Conservative, performance, battery saving, etc...)
As far as the controller apps go though, I like the ones that can set the screen off speeds at a different rate than the screen on speeds. That makes sure I don't drain battery at alarming rates when the phone is in my pocket because a rogue app decided it wanted to get funky.
As Skipjacks mentioned, the overclocking speed is due to the kernel you have flashed.
If you are unsure on which kernel to use,
Always use the kernels suggested by the ROM developer.
Of course, you could try various Kernels but do keep in mind that not all ROM's support different kernels.
Normally the current roms has CPU clocking apps built into it,
one widely used is the Daemon control. It usually comes with an app that you can control the overclocking speed.
The current app i'm using, I use System Tuner Pro (yes I support app developers)
It enables me to force cpu2 online, which ultimately makes my phone faster.
Howdy everyone,
i happened to come across an app on the market called CPU Gauge and this demonstrates to you exactly what each core on your phone is doing at all times, even in your notification bar at all times. Now i have noticed no matter what i do there only ever seems to be 1 core running which is pretty pants i reckon. how can i enable it to run dual cores all of the time? i dont understand it personally, why have a dual channel architecture if its hardly ever used? and surely it having to decide whether to use one core over two and to send data down both channels or just the one is probably a reason why we get lag? i am probably completely wrong but id rather the cpus always be on and drain battery if it improves overall performance
androidfanboi said:
Howdy everyone,
i happened to come across an app on the market called CPU Gauge and this demonstrates to you exactly what each core on your phone is doing at all times, even in your notification bar at all times. Now i have noticed no matter what i do there only ever seems to be 1 core running which is pretty pants i reckon. how can i enable it to run dual cores all of the time? i dont understand it personally, why have a dual channel architecture if its hardly ever used? and surely it having to decide whether to use one core over two and to send data down both channels or just the one is probably a reason why we get lag? i am probably completely wrong but id rather the cpus always be on and drain battery if it improves overall performance
Click to expand...
Click to collapse
Though a mod will move this thread please post questions in the general section this is for development purposes only..
But if what you say is true i will have to look into this. What rom are you currently running?
Just a rooted/overclocked LG stock gingerbread rom.
For me it shows 2 Cores working ,but second is ON only when needed (as it should be) So its OK. Lags are because of poor ram managment on LG software, I recommend Rushdroid ROM.
What I know, Android 2.3 and below does not provide a support for multi cores. However, ICS does support it. So, I think the phone will run much better when the ICS update comes.
abo_mara7 said:
What I know, Android 2.3 and below does not provide a support for multi cores. However, ICS does support it. So, I think the phone will run much better when the ICS update comes.
Click to expand...
Click to collapse
nope. thasts only an urban legend But it can improve performance at some points, but I would be rather sceptic. Custom roms must be always better (what they are doing making software, making it slower on purpose? go Samsung way and hire cm team members)
In games it uses both cores but im dissapointed that when testing swapping between different apps and web browsing seemed to all be using just the one core, and that was with lags inbetween swapping from for instance gallery to browser. I love this phone great specs but it annoys me more and more to think LG really did have no clue when it came down to putting it all into action. is there any way to have 2 cores on at all times or atleast change the values that decide when to use second core/channel.
If anything it makes for an interesting discussion
IFLPI said:
nope. thasts only an urban legend But it can improve performance at some points, but I would be rather sceptic. Custom roms must be always better (what they are doing making software, making it slower on purpose? go Samsung way and hire cm team members)
Click to expand...
Click to collapse
It has a partial support, not 100%, and the proof is that all dual core phones which received ICD update, got a huge improvement in the performance, as their users said.
androidfanboi said:
In games it uses both cores but im dissapointed that when testing swapping between different apps and web browsing seemed to all be using just the one core, and that was with lags inbetween swapping from for instance gallery to browser. I love this phone great specs but it annoys me more and more to think LG really did have no clue when it came down to putting it all into action. is there any way to have 2 cores on at all times or atleast change the values that decide when to use second core/channel.
If anything it makes for an interesting discussion
Click to expand...
Click to collapse
The processor works as it should be, all cores when needed. Check System Panel app. Ram is the issue here. On stock it will be always laggy. On rushdroid and samba there is good ram management. Almost 250mb for the user. On stock i doubt if there is 130mb free available.
@up: there is no evidence that GB supports 1 core only and ICS multiple cores. A better performance on ICS can be due to the bigger optimizations, and hw support (that can be buggy) like gpu enabled scrolling etc.
But Ive heard that ics supports fully multicores, and that is an urban legend for me (no evidence) Ics can be just more optimized than gingerbread (and more like honeycomb which was quite fast)
IFLPI said:
The processor works as it should be, all cores when needed. Check System Panel app. Ram is the issue here. On stock it will be always laggy. On rushdroid and samba there is good ram management. Almost 250mb for the user. On stock i doubt if there is 130mb free available.
@up: there is no evidence that GB supports 1 core only and ICS multiple cores. A better performance on ICS can be due to the bigger optimizations, and hw support (that can be buggy) like gpu enabled scrolling etc.
But Ive heard that ics supports fully multicores, and that is an urban legend for me (no evidence) Ics can be just more optimized than gingerbread (and more like honeycomb which was quite fast)
Click to expand...
Click to collapse
you are correct cores are working as they should be not a problem here at... Gingerbread supports multicore and does use the cpu to the max when needed, you don't need to run both your cores all the time if that was the case you would need to charge your phone every 3 hours....
The issue with our optimus 3d is it needs ram tweaks to keep it smooth, 512mb ram is good i am not complaining because it's dual channel and so on so the ram speed is amazing just to free up ram we have tweaks...
Also the cpu is used to the max when needed, when you make a call you do not need both cores working at the same time that would be pointless. But when you play games, browse the net and bench your device all cores are used at the same time...
if you want to try it (see the difference) with both cores enabled ,(and cpu speed at max) try system tuner app , in cpu setting put governor to "performance" the first core will go to max speed , then go to active tweak and there is an option to force all cpu on , try it , it will be hard for the battery... when you put governor back to hotplug , the second core will return on demand (on/off) . if you want to do it again after you have to redo all step and turn the force all cpu on off and on again...
i'm on v21D on rushdroid 3.6.3. Both cores show up as working. 1 core ususally hits 1.4ghz and 2nd one upto 1ghz during regular processing. Great app btw tnx for letting us know
Which kernel you use on rushdroid @1,4ghz?
IFLPI said:
Which kernel you use on rushdroid @1,4ghz?
Click to expand...
Click to collapse
Titan kernal v21d
Sent from my LG-P920h using XDA
Its not neccessary to use dual core all the times ,using dual core for small task degrade the performance that increasing. Since our phone have dual memory the cache plays an important role in deciding which core should be used.
Dear XDA people,
Im currently working with Max's V4 RC2 kernel in combination with Cromi-X 4.6.9 (still need to update to the latest), which gives me a pretty smooth working tablet.
Now, im running the cpu at 1900mhz, 1225mV (still testing if i can go lower), and I can adjust speed and voltage nicely with Trickster Mod.
But, I would wan't to crank up the gpu speed (which is currently 666mhz I think?) and have the same "options/settings" available to do so. For example, a rom limitation of 750/800mhz on the gpu, with a variation of voltages to choose from. This way I can get as much gpu power as possible, since i find gaming on the tf700 pretty disappointing in terms of performance (of course a lot of games are not optimized for tegra).
Do you guys know what would be the best possible solution to overclock/adjust the gpu speed+voltage?
Thanks!
Sent from my GT-I9505 using xda app-developers app
tijsva said:
Dear XDA people,
Im currently working with Max's V4 RC2 kernel in combination with Cromi-X 4.6.9 (still need to update to the latest), which gives me a pretty smooth working tablet.
Now, im running the cpu at 1900mhz, 1225mV (still testing if i can go lower), and I can adjust speed and voltage nicely with Trickster Mod.
But, I would wan't to crank up the gpu speed (which is currently 666mhz I think?) and have the same "options/settings" available to do so. For example, a rom limitation of 750/800mhz on the gpu, with a variation of voltages to choose from. This way I can get as much gpu power as possible, since i find gaming on the tf700 pretty disappointing in terms of performance (of course a lot of games are not optimized for tegra).
Do you guys know what would be the best possible solution to overclock/adjust the gpu speed+voltage?
Thanks!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I think 666mhz GPU setting is probably reserved for Satans minions. At the moment the only way to control GPU speed is by adjusting the voltage. This is easiest using hunds kernel (3.1 if you have problems with 3.2) and his app. Together, you can crank the GPU all the way up to 775MHz and fry some eggs on the back of your TF700 and waiting for it to go into nuclear meltdown.
I know the gpu runs hot, thats why I want to see what speeds can be achieved with limited voltage. So you‘re saying the only way to change gpu speed is by setting a higher voltage for it? Why is that exactly?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
You've posted this in the wrong forum, so it will be deleted, in the mean time there is really no reason to use 1900mhz even less so while gaming. 1700mhz at max (it can go higher but you wont see much change/ if at all in benchmarks/ games but u'll see the difference in battery life)
As for gpu i run 750 mhz but again the difference between 650 - 750 mhz is hardly noticeable, gaming performance isn't great on the tf700, the tf300t doesn't look as good but its noticeably smoother with 3d
Moral of the story the tegra 3 gpu isn't powerful enough for 1920x1200 the tegra 4 wont be much better, the tegra 5 is the interesting one
tijsva said:
So you‘re saying the only way to change gpu speed is by setting a higher voltage for it?
Click to expand...
Click to collapse
Yes, that's what I'm saying. Unless you want to learn to create kernels and do all the magical voodoo these wizards do to bring us OC kernels!
tijsva said:
Why is that exactly?
Click to expand...
Click to collapse
I have no idea, been wondering that myself. I even posted the question somewhere about a week ago, but no one enlightened me. I really reccomend using hunds kernel and app though. There is a "gaming" option in his app that works very well, good speed without the ominous red glow of molten metal on your TF700's back panel.
TitanUranus said:
Yes, that's what I'm saying. Unless you want to learn to create kernels and do all the magical voodoo these wizards do to bring us OC kernels!
I have no idea, been wondering that myself. I even posted the question somewhere about a week ago, but no one enlightened me. I really recommend using hunds kernel and app though. There is a "gaming" option in his app that works very well, good speed without the ominous red glow of molten metal on your TF700's back panel.
Click to expand...
Click to collapse
Are you saying increasing gpu voltage will subsequently increase gpu frequency? (i have no idea how it works, ive never bothered to look into it but now im interested) _that or Hunds will know but im guessing if thats the case freq and voltage must be linked in a voltage table but i would have thought freq could be changed independently to voltage
JoinTheRealms said:
You've posted this in the wrong forum, so it will be deleted, in the mean time there is really no reason to use 1900mhz even less so while gaming. 1700mhz at max (it can go higher but you wont see much change/ if at all in benchmarks/ games but u'll see the difference in battery life)
As for gpu i run 750 mhz but again the difference between 650 - 750 mhz is hardly noticeable, gaming performance isn't great on the tf700, the tf300t doesn't look as good but its noticeably smoother with 3d
Moral of the story the tegra 3 gpu isn't powerful enough for 1920x1200 the tegra 4 wont be much better, the tegra 5 is the interesting one
Click to expand...
Click to collapse
I know the tf700 isnt much of a gaming tablet unfortunately, but then again, why not setting it up so that it runs games as smooth as the hardware will allow ? Every small improvement is an improvement if you ask me.
For 750mhz gpu, what kernel are you using?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
I'm using hundsbuahs latest kernel, the problem with tegra CPUs is thermal throttling, it starts around 72c on a lot of devices (not sure about the tf700) at 1900 you could find worse gaming performance than a lower cpu / GPU clock speed. Its completely up to you, hundsbuahs kernels give users a lot of flexibility as they can push the devices to the limit, I like _that's kernels personally they suited to my usage (what ever that means)
I installed Kernel Audiutor from Google play and I have the GHz set to performance meaning that they will run at the max GHz the entire time (that's 1.5 Ghz on all 4 cores and 2.5 ghz on two cores or 2.2 ghz when on the cores and 1.5 ghz on 4 cores) will this reduce the battery by a lot? I've noticed increases battery usage recently.
Also is there a way to install custom rom without wiping or does it have to be wiped?
Not sure if I've posted in the right forum sorry.
Aaron3018 said:
I installed Kernel Audiutor from Google play and I have the GHz set to performance meaning that they will run at the max GHz the entire time (that's 1.5 Ghz on all 4 cores and 2.5 ghz on two cores or 2.2 ghz when on the cores and 1.5 ghz on 4 cores) will this reduce the battery by a lot? I've noticed increases battery usage recently.
Also is there a way to install custom rom without wiping or does it have to be wiped?
Not sure if I've posted in the right forum sorry.
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
On Kernel "Adiutor" you have CPU tab that shows which core is running/idle and how it scales. This process is controlled by the "governor", in your case, you have performance.
If you have stock ROM and want to install a custom ROM, you have to wipe data.
Hi
I own SM-P900 and using Lineage OS. I would like to boost the cpu and gpu as much as possible. Can someone give me some good numbers for voltages/freqs that I could input in apps like Kernel Adiutor?
thanks
Not sure you can even overclock our CPU. If you could do it, I would be worried about heat issues.