I just flashed Miui 5 + Gapps 4.2.2 and now i am getting boot loop (M Logo - Black screen - reboot).
I was on system 1.
Now do I have any other option than FXZing via RSD lite?
My phone is MB865 Indian version.
I am downloading --> 320.8 MiB Retail Asian 6.7.2_EDEM-18-SEARET_cfc.xml.zip
Which is the difference in this version --> 517.4 MiB Asia (Operator) 5.5.1-EDEM-27-ASIAOPS_cfc.xml.zip
and this --> 517.3 MiB Retail Asian 5.5.1-EDEM-27-SEARET_cfc.xml.zip
Do I need the latest RSD lite for fxzing? I have this one RSDlite v6.1.5 http://www16.zippyshare.com/v/85618478/file.html
Also I am getting a "?" while charging.
Redicus said:
I just flashed Miui 5 + Gapps 4.2.2 and now i am getting boot loop (M Logo - Black screen - reboot).
I was on system 1.
Now do I have any other option than FXZing via RSD lite?
My phone is MB865 Indian version.
I am downloading --> 320.8 MiB Retail Asian 6.7.2_EDEM-18-SEARET_cfc.xml.zip
Which is the difference in this version --> 517.4 MiB Asia (Operator) 5.5.1-EDEM-27-ASIAOPS_cfc.xml.zip
and this --> 517.3 MiB Retail Asian 5.5.1-EDEM-27-SEARET_cfc.xml.zip
Do I need the latest RSD lite for fxzing? I have this one RSDlite v6.1.5 http://www16.zippyshare.com/v/85618478/file.html
Also I am getting a "?" while charging.
Click to expand...
Click to collapse
RSDlite v6.1.5 is the latest AFAIK.
For Indian MB865 (non AT&T), use only Searet ROM. 6.7.2 is ICS and 5.5.1 is GB.
It seems your phone is softbricked, and hence the '?' while charging. If you can't go to CWM or BMM Recovery, then you have no option other than to FXZ.
XploitMachine said:
RSDlite v6.1.5 is the latest AFAIK.
For Indian MB865 (non AT&T), use only Searet ROM. 6.7.2 is ICS and 5.5.1 is GB.
It seems your phone is softbricked, and hence the '?' while charging. If you can't go to CWM or BMM Recovery, then you have no option other than to FXZ.
Click to expand...
Click to collapse
Yes, it seems soft bricked. Ok, Have to fxz.
Do I have to keep in mind anything while fxz?
Redicus said:
Yes, it seems soft bricked. Ok, Have to fxz.
Do I have to keep in mind anything while fxz?
Click to expand...
Click to collapse
Make sure you have the right FXZ, latest Motorola drivers installed and Battery charged to atleast 75%. Good Luck!
Redicus said:
Yes, it seems soft bricked. Ok, Have to fxz.
Do I have to keep in mind anything while fxz?
Click to expand...
Click to collapse
Read this guide ...........
http://forum.xda-developers.com/showthread.php?t=1909319
XploitMachine said:
Make sure you have the right FXZ, latest Motorola drivers installed and Battery charged to atleast 75%. Good Luck!
Click to expand...
Click to collapse
darth_nihar said:
Read this guide ...........
http://forum.xda-developers.com/showthread.php?t=1909319
Click to expand...
Click to collapse
I am trying FXZ on laptop.
Windows 8. Original Cable. Rsd 6.1.5.
But the option "decompress and flash" is not highlighted.
When i click "Show phone" nothing happens.
Is it not reading the phone? I get the beep noise while connecting.
But i dont see the eject mb865 icon. The "eject mb865" icon appears while bootlooping but not while i am in AP fastboot.
EDIT: I am in transfer mode. But now it shows battery low, cannot program. And when I charge via Ac adapter it shows a "?" inside battery icon. I think its not charging and i wont be able to fxz.
Redicus said:
I am in transfer mode. But now it shows battery low, cannot program. And when I charge via Ac adapter it shows a "?" inside battery icon. I think its not charging and i wont be able to fxz.
Click to expand...
Click to collapse
You'll just need an external charger since your phone won't charge the battery in its current state. Or, if you're feeling daring, Google the phrase MacGuyver battery charge method.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Redicus said:
I am trying FXZ on laptop.
Windows 8. Original Cable. Rsd 6.1.5.
But the option "decompress and flash" is not highlighted.
When i click "Show phone" nothing happens.
Is it not reading the phone? I get the beep noise while connecting.
But i dont see the eject mb865 icon. The "eject mb865" icon appears while bootlooping but not while i am in AP fastboot.
EDIT: I am in transfer mode. But now it shows battery low, cannot program. And when I charge via Ac adapter it shows a "?" inside battery icon. I think its not charging and i wont be able to fxz.
Click to expand...
Click to collapse
Do you have the latest Motorola Drivers installed?
If you're using Windows 8 64-bits, try running RSDlite in Compatibility Mode.
Have a look at the tutorial given here:
http://www.youtube.com/watch?v=AHaEHjSzvQQ
XploitMachine said:
Do you have the latest Motorola Drivers installed?
If you're using Windows 8 64-bits, try running RSDlite in Compatibility Mode.
Have a look at the tutorial given here:
http://www.youtube.com/watch?v=AHaEHjSzvQQ
Click to expand...
Click to collapse
I had wrong/old drivers. Now when atlast everything was done and i got usb connected/transfer mode, it said battery low, cant flash. I cant seem to even charge the phone. It shows a ?. I also dont think it will charge in stock Recovery. So much pain ;p
I found solutions though:
1) Found someone with atrix 2. Will need to visit his place and use his charged battery. (Going for this solution).
Is it ok to use his battery if he has ME865? Mine is MB865.
2) Macgyver method - 2 parallel batteries.
3) Cutting another data cable and Wiring the battery with that data cable - red wire & black wire.
4) Getting a battery Charger.
Posted all solutions I found for fellow atrix users.
Redicus said:
I had wrong/old drivers. Now when atlast everything was done and i got usb connected/transfer mode, it said battery low, cant flash. I cant seem to even charge the phone. It shows a ?. I also dont think it will charge in stock Recovery. So much pain ;p
I found solutions though:
1) Found someone with atrix 2. Will need to visit his place and use his charged battery. (Going for this solution).
Is it ok to use his battery if he has ME865? Mine is MB865.
2) Macgyver method - 2 parallel batteries.
3) Cutting another data cable and Wiring the battery with that data cable - red wire & black wire.
4) Getting a battery Charger.
Posted all solutions I found for fellow atrix users.
Click to expand...
Click to collapse
If the first one is feasible, then go for it 'cause making McGyver charger would be a lengthy and messy process. Else, the last option would do.
Redicus said:
I am trying FXZ on laptop.
Windows 8. Original Cable. Rsd 6.1.5.
But the option "decompress and flash" is not highlighted.
When i click "Show phone" nothing happens.
Is it not reading the phone? I get the beep noise while connecting.
But i dont see the eject mb865 icon. The "eject mb865" icon appears while bootlooping but not while i am in AP fastboot.
EDIT: I am in transfer mode. But now it shows battery low, cannot program. And when I charge via Ac adapter it shows a "?" inside battery icon. I think its not charging and i wont be able to fxz.
Click to expand...
Click to collapse
If your from India just goto the closest mobile repair shop and ask them to boost charge your battery.......or
Buy a external battery charger it should cost around 50 to 100 rupees......:laugh:
XploitMachine said:
If the first one is feasible, then go for it 'cause making McGyver charger would be a lengthy and messy process. Else, the last option would do.
Click to expand...
Click to collapse
Yes, Thanks for helping Xploit.
darth_nihar said:
If your from India just goto the closest mobile repair shop and ask them to boost charge your battery.......or
Buy a external battery charger it should cost around 50 to 100 rupees......:laugh:
Click to expand...
Click to collapse
Wow, what exactly is boost charging, Nihar?
Glad to hear battery chargers are cheap.
Redicus said:
Yes, Thanks for helping Xploit.
Wow, what exactly is boost charging, Nihar?
Glad to hear battery chargers are cheap.
Click to expand...
Click to collapse
They connect you battery to a multimeter and charge it similar to mcgruyer method ..........
And ya chargers are real cheap lol........
XploitMachine said:
If the first one is feasible, then go for it 'cause making McGyver charger would be a lengthy and messy process. Else, the last option would do.
Click to expand...
Click to collapse
darth_nihar said:
They connect you battery to a multimeter and charge it similar to mcgruyer method ..........
And ya chargers are real cheap lol........
Click to expand...
Click to collapse
I connected my phone, and it says transfer mode, usb connected in AP Fastboot. But the option "Decompress and flash" is inactive. Only decompress option is active. And after it is "decompressed" and I click start, nothing happens.
Redicus said:
I connected my phone, and it says transfer mode, usb connected in AP Fastboot. But the option "Decompress and flash" is inactive. Only decompress option is active. And after it is "decompressed" and I click start, nothing happens.
Click to expand...
Click to collapse
do you have team viewer .......
darth_nihar said:
do you have team viewer .......call me once +919030789001 :laugh:
Click to expand...
Click to collapse
Thanks a lot Nihar. Its done :highfive:
It didnt work in Laptop. Got it to Flash on Desktop.
Booted sucessfully. Was so much of a headache
2 things learnt from this:
1) Always flash anything with 100% battery, no matter what.
2) Keep basic ICS ROM on sys 1. Dont use system 1 for too much flashing.
Thanks a lot everyone. :good:
same problem here...with a minor difference
After having flashed my system_1 with miui_me865_santajin_4.7.25_09a9da224f_4.2 and later with gapps-jb-20130813-signed i am stuck with boot loop.I am trying FXZ on my laptop.Windows 8.1
I am getting a message saying the phone failed to switch to fastboot mode. RESULT Fail on RSD Lite 6.1.6
any inputs?
Related
my phone was running the official 2.2 update and i wanted to get back to 2.1 to flash a custom rom. it did a master clear just fine in ODIN but locked up at "DO NOT TURN OFF.." so i had to unplug it and restart, now its stuck at the pc to phone image and ODIN still wont flash it..plz help!
You're supposed to click 'Start' and THEN do Master Clear.
Remove battery so phone is off
Reinsert battery but leave off
Open Odin 1 click program
Hold volume up/down at same time, FOLLOWED by plugging phone in
You should be in Download mode
Click start & hope for the best
Hope that helps
ninjuh said:
You're supposed to click 'Start' and THEN do Master Clear.
Remove battery so phone is off
Reinsert battery but leave off
Open Odin 1 click program
Hold volume up/down at same time, FOLLOWED by plugging phone in
You should be in Download mode
Click start & hope for the best
Hope that helps
Click to expand...
Click to collapse
i tried that, it still just sits there saying do not turn off...
At this point I would suggest you buy a jig from someone on ebay or follow the instructions here for a cheap 99 cent jig
These are the resistors you need to get at radio shack
http://www.radioshack.com/product/index.jsp?productId=2062350
Catalog #: 271-1347
rpicaso said:
These are the resistors you need to get at radio shack
http://www.radioshack.com/product/index.jsp?productId=2062350
Catalog #: 271-1347
Click to expand...
Click to collapse
is the JIG only needed to force to download mode? If so, I can get to download mode right now..
holy ****!! its working! the blue progress bar is moving right now! OMG! I musta tried it 10 times before it started loading, PHEW!! thanks for yall's responses, i think im ok now
Please help im not noob bricked
Fuct my cappy with odin. no download mode, no power, battery not charging/getting warm. I'm NOT a newb/noob/nub lol by any means. My question is if my bootloader is broken will using the jig even matter. I got a red screen when odin failed while flashing to 2.3.3 but it failed half way through after it seemed to be flashing fine. My concern is I just wiped everything of my phone. If so has anyone Jtag'd one here? I know about jtagbox.com/?s=CAPTIVATE and I'm an electrical engineering student whos done 360 jtag and router jtag for dd-wrt so im more than comfortable with it but I don't wanna spend hours if its for nothing.
ninjuh said:
You're supposed to click 'Start' and THEN do Master Clear.
Remove battery so phone is off
Reinsert battery but leave off
Open Odin 1 click program
Hold volume up/down at same time, FOLLOWED by plugging phone in
You should be in Download mode
Click start & hope for the best
Hope that helps
Click to expand...
Click to collapse
Thanks for the help. This saved my butt just now! WHEW!
UGART3 said:
Fuct my cappy with odin. no download mode, no power, battery not charging/getting warm. I'm NOT a newb/noob/nub lol by any means. My question is if my bootloader is broken will using the jig even matter. I got a red screen when odin failed while flashing to 2.3.3 but it failed half way through after it seemed to be flashing fine. My concern is I just wiped everything of my phone. If so has anyone Jtag'd one here? I know about jtagbox.com/?s=CAPTIVATE and I'm an electrical engineering student whos done 360 jtag and router jtag for dd-wrt so im more than comfortable with it but I don't wanna spend hours if its for nothing.
Click to expand...
Click to collapse
I forgot if we already have talked but I think we did. I can JTAG the Captivate if you need help.
my atrix 2 don't know dead or what?
it did't on while pressing the power button and the screen black or nothing appear while i plug in the charger.
Help!!!!!!
say someting in detail please~
say someting in detail please~
My atrix 2 ME865 was running ICS4.0.4 MERetail.I wanna flash it back to 2.3.6,so i download the (InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip) from the droid-developers.
My phone battery is 40% while flashing using RSDlite 5.6.
Everything ok but at the process 5/21 it say "FAIL"
then the phone just black screen.
atrix2 said:
my atrix 2 don't know dead or what?
it did't on while pressing the power button and the screen black or nothing appear while i plug in the charger.
Help!!!!!!
Click to expand...
Click to collapse
Have you tried holding down BOTH volume buttons while powering on the device to boot into AP Fastboot, and try to flash the FXZ that way?
I try that but nothing happen.
atrix2 said:
My atrix 2 ME865 was running ICS4.0.4 MERetail.I wanna flash it back to 2.3.6,so i download the (InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip) from the droid-developers.
My phone battery is 40% while flashing using RSDlite 5.6.
Everything ok but at the process 5/21 it say "FAIL"
then the phone just black screen.
Click to expand...
Click to collapse
Meretail flashing with at&t rom?
It does not seem like a good idea.
You can downgrade it to http://sbf.droid-developers.org/edison/5.5.1-EDEM-27-MEARET_cfc.xml.zip with RSd Lite (Made it with RSD Lite 4.7 successfully).
atrix2 said:
I try that but nothing happen.
Click to expand...
Click to collapse
So, can you even boot into AP Fastboot, or is your device not powering on at all...?
Solution
seems like ur rom chip in the motherboard has gone bad. same happened to me when trying to flash custom rom to AT&T atrix 2. Went to Motorola service center costed me $160 to get a new motherboard ...but it got fixed and worth the effort....worth a try...
So i was flash the wrong rom.
But i can't flash again because i cannot enter the AP Fastboot,both vol button n power on do nothing.
atrix2 said:
So i was flash the wrong rom.
But i can't flash again because i cannot enter the AP Fastboot,both vol button n power on do nothing.
Click to expand...
Click to collapse
Maybe your battery is empty. Never start to flash without full battery (and not correct rom of course).
If you're feeling brave, try THIS...
Thanks for the feedback.
So i can still hold both vol button + power up to enter the bootloader if i flash fail?
I remember it stuck at 5/21 in RSDlite.
atrix2 said:
Thanks for the feedback.
So i can still hold both vol button + power up to enter the bootloader if i flash fail?
I remember it stuck at 5/21 in RSDlite.
Click to expand...
Click to collapse
No, the bootloader is locked on the MB865. You mentioned before that trying to boot into AP Fastboot isn't responsive either, right? If you are able to do anything, you need to flash 5.5.1-EDEM-27-MEARET_cfc.xml.zip as xanadu suggested.
Always a good idea to make a CWM backup before flashing any new roms, just in case...
LOCKED??
I think my battery is empty so it black screen when i press the button.
And i got many cwm backup which i backup before my phone cannot boot.
How to restore the cwm backup if my phone can't boot?
atrix2 said:
LOCKED??
I think my battery is empty so it black screen when i press the button.
And i got many cwm backup which i backup before my phone cannot boot.
How to restore the cwm backup if my phone can't boot?
Click to expand...
Click to collapse
If you're completely dead in the water, you'll have to find a way to get charge to the battery. You might try The McGuyver Method to get a charge to battery, but be very wary in doing this -you could fry your phone and/or explode your battery. If you're not comfortable doing this (and I don't recommend this if you are not savvy with electrical stuff and 'open phone surgery' you should first try and get your hands on a new OEM battery!
Apex_Strider said:
If you're completely dead in the water, you'll have to find a way to get charge to the battery. You might try The McGuyver Method to get a charge to battery, but be very wary in doing this -you could fry your phone and/or explode your battery. If you're not comfortable doing this (and I don't recommend this if you are not savvy with electrical stuff and 'open phone surgery' you should first try and get your hands on a new OEM battery!
Click to expand...
Click to collapse
i tried that method on my defy 3 times .....never had issue.....but still it was quite scary for me every time.....but in the end it worked......risk is needed to be taken ......
Thanks but that way is too dangerous.I was afraid so i will send it to the Motoservice because i got no ideo for the empty battery on a dead phone.
atrix2 said:
Thanks but that way is too dangerous.I was afraid so i will send it to the Motoservice because i got no ideo for the empty battery on a dead phone.
Click to expand...
Click to collapse
Before you ship your device off to the netherworld of Motorubbish, try getting a new battery. It may be a faster fix and you won't have to deal with wait tine from Moto. Plus, if you've rooted and Moto is able to determine that you'll have no warranty.
Sent from my MB865 using xda premium
Apex_Strider said:
Before you ship your device off to the netherworld of Motorubbish, try getting a new battery. It may be a faster fix and you won't have to deal with wait tine from Moto. Plus, if you've rooted and Moto is able to determine that you'll have no warranty.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Also if you are debating getting a new battery, try to get an external charger, it costs a lot less and you will be able to recover from this a whole lot easier if you have the external charger, otherwise McGyver is the only way out for you...
I would NOT take this into Motorola, especially since you failed a flash, they can see that, the first time they get it to turn on it will go to the recovery screen and say failed flash.... They may NOT give you any support.
I would try the external battery charger.
Here are a couple examples of Atrix2 external battery chargers:
http://www.wirelessemporium.com/p-1...pare-battery-charger-w-usb-port-mid-size-.asp
http://www.wirelessemporium.com/p-102964-universal-spare-battery-charger-w-usb-port.asp
jimbridgman said:
Also if you are debating getting a new battery, try to get an external charger, it costs a lot less and you will be able to recover from this a whole lot easier if you have the external charger, otherwise McGyver is the only way out for you...
I would NOT take this into Motorola, especially since you failed a flash, they can see that, the first time they get it to turn on it will go to the recovery screen and say failed flash.... They may NOT give you any support.
I would try the external battery charger.
Here are a couple examples of Atrix2 external battery chargers:
http://www.wirelessemporium.com/p-1...pare-battery-charger-w-usb-port-mid-size-.asp
http://www.wirelessemporium.com/p-102964-univertssal-spare-battery-charger-w-usb-port.asp
Click to expand...
Click to collapse
thats your best bet unless you know someone with the same phone. I have a family member with the same one, so when I killed my battery during a flash I just stole that one for 5 minutes.
Hi!
I'm new to flashing and tried to install clearRom in my P3115. The problem is that after reboot, the tablet wont start!
If I tried to connect it to the pc, drivers is nos installed / recognized and the batery logo appears but never charges. It show as is it is empty.
I can´t start it neither or access download mode or CWR mode. Odin does not recognize it neither!
Please, help! It's like dead!
Thanks a lot! :good:
Explain exactly what you did, and maybe someone can help you further. Good luck.
Sent from my Rezound using Tapatalk 2
JeramyEggs said:
Explain exactly what you did, and maybe someone can help you further. Good luck.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the tip.
I just used Odin to flash clear Rom like explained here:
theandroidsoul cleanrom-custom-rom-for-galaxy-tab-2-10-1-guide/
Everything seems to be fine, but after restart nothing happened. I noted that if you plug the tablet to the usb port, it keeps looping the sound as when any usb is connected. Over and Over again.
It never starts, not even the Samsung logo. The only thing it does is, once plugged in, I can see the battery charge logo, but always empty.
Please, help!!
Thanks!
What kind of message do you get from Odin if you try to connect it and load a ROM? My tab was stuck also but I was able to get Odin load even when it looked like it was connecting.
jgfan1972 said:
What kind of message do you get from Odin if you try to connect it and load a ROM? My tab was stuck also but I was able to get Odin load even when it looked like it was connecting.
Click to expand...
Click to collapse
Hi jgfan!
It just worn´t work, I cant flash anything because i's like it never connects as the usb makes his connect / disconnect loop sound.
Odin never shows the ID:COM PORT rectangle as connected or colored!
Thanks for any tip.
Have you install the driver in your computer?
michaelzzz said:
Have you install the driver in your computer?
Click to expand...
Click to collapse
Hi Michaelzzz, I did!
I also installed Kies, but it's like a usb loop and never ends recognizin it!
I keep hearing the sound when you connect the usb over and over...
Not sure, what problem you face exactly.
This is what i understand, you get a battery logo while your device starts and wont boot up right? If yes, try these steps, might help you.
1. battery logo you get in the boot thats because, you have connected USB Cable to computer/Charger.
2. Make sure you have charge in battery so that while doing below steps, would be a problem.
3. Once you find, it has a enough battery charge you can disconnect the cable safely (If not place it for a wallcharger, untill the battery logo fills up the juice and you find it as charged completly)
4. While booting Press the POWER+VOLUME DOWN for Download mode.
5. Now connect your tablet to PC which has ODIN and sufficient drivers installed,
6. ODIN should detect to flash the ROM.
7. Download extact Firmwares from Sammobile site / from XDA links, which is suitable.
Hopefully it should bootup with no issues.
nagabushan.c said:
Not sure, what problem you face exactly.
This is what i understand, you get a battery logo while your device starts and wont boot up right? If yes, try these steps, might help you.
1. battery logo you get in the boot thats because, you have connected USB Cable to computer/Charger.
2. Make sure you have charge in battery so that while doing below steps, would be a problem.
3. Once you find, it has a enough battery charge you can disconnect the cable safely (If not place it for a wallcharger, untill the battery logo fills up the juice and you find it as charged completly)
4. While booting Press the POWER+VOLUME DOWN for Download mode.
5. Now connect your tablet to PC which has ODIN and sufficient drivers installed,
6. ODIN should detect to flash the ROM.
7. Download extact Firmwares from Sammobile site / from XDA links, which is suitable.
Hopefully it should bootup with no issues.
Click to expand...
Click to collapse
Dear nagabushan, thanks for your help!
I think the problem is battery related, cause the icon never fills up. It's like it cant charge batteries! The juice never even apears!
I'll leave it plugged in to the wall for a few our, and see what is going on.
I'll be back in a few hours!
Bootloader messed up. Sorry, only JTAG works with this.
jonttuv said:
Bootloader messed up. Sorry, only JTAG works with this.
Click to expand...
Click to collapse
Thanks jonttuv. Actually, after 6 hours, the battery juice is the same.
I'll check in the forum about this procedure.
If you already know anything, Can you please provide a good step by step to accomplish this?
Thanks in advance to all.
melbos said:
Thanks jonttuv. Actually, after 6 hours, the battery juice is the same.
I'll check in the forum about this procedure.
If you already know anything, Can you please provide a good step by step to accomplish this?
Thanks in advance to all.
Click to expand...
Click to collapse
This is just a guess, but i think that there is no JTAG unit(that is just plugged to the tablet and DOWNLOAD MODE ) There is a method that can be extremely dangerous.
This method is to open the tab, take the motherboard, find the correct pins and flash JTAG. I DO NOT TAKE RESPONSIBILITY FOR THIS METHOD NEITHER DO I SUPPORT IT!
The second method is to take it to the warranty. Download mode is not accessible so they can't tell if it's rooted, custom rom or anything like that. They will either send you a new device and voilá. That's it. Or they try to fix it. Google samsung galaxy tab 2 jtag. It will help you if you prefer the first option.
Hi!
I had installed cyannogenmod 12.1 on my device and it worked, then I went on to install another kernel eXPerience and that made my wifi and usb port on the phone to stop working. It only connects via fastboot but I can't get it to charge. (Tried the reboot loop thing, it just depletes the battery.) If I do get it to charge, I could reflash a working recovery, format cyannogen and use it to push a backup i made on my PC via bluetooth (ADB doesn't work.) Solutions?
If it connects in bootloader mode then I think your phone should be charging simultaneously
If not try using different charger or cable.
Paradox♀ said:
If it connects in bootloader mode then I think your phone should be charging simultaneously
If not try using different charger or cable.
Click to expand...
Click to collapse
Tried, it doesn't, powers off and won't boot afterwards (Only tried this with 2 cables, but somehow the battery magically gains a small amount of charge the next day.
RayonDeLumiere said:
Tried, it doesn't, powers off and won't boot afterwards (Only tried this with 2 cables, but somehow the battery magically gains a small amount of charge the next day.
Click to expand...
Click to collapse
So it seems either the battery is not working properly or the charging pin I is damaged recommend you to go to the mobile repairing shops.
RayonDeLumiere said:
Tried, it doesn't, powers off and won't boot afterwards (Only tried this with 2 cables, but somehow the battery magically gains a small amount of charge the next day.
Click to expand...
Click to collapse
Try charging via wall socket.
Paradox♀ said:
So it seems either the battery is not working properly or the charging pin I is damaged recommend you to go to the mobile repairing shops.
Click to expand...
Click to collapse
It's cause I changed the kernel I think, I believe the hardware's fine
lost101 Yea I tried that too - in 2 whole days it got a small amount of charge enough to boot into fastboot but shuts off if I load the OS or recovery.
RayonDeLumiere said:
lost101 Yea I tried that too - in 2 whole days it got a small amount of charge enough to boot into fastboot but shuts off if I load the OS or recovery.
Click to expand...
Click to collapse
The phone will charge if left on the fastboot screen.
lost101 said:
The phone will charge if left on the fastboot screen.
Click to expand...
Click to collapse
Tried that yesterday, completely lost charge and now it won't boot to fastboot either
It could be the kernel, drivers, rom. Go back to stock rom, do a total wipe.
gabriel96torres said:
It could be the kernel, drivers, rom. Go back to stock rom, do a total wipe.
Click to expand...
Click to collapse
I would if it charged! At this state, the battery's too low for me to flash anything.
Yoou didn t do backup before? How many % are left? There is enougth to flash another kernel?
144556 said:
Yoou didn t do backup before? How many % are left? There is enougth to flash another kernel?
Click to expand...
Click to collapse
Did, but it's on my PC, and I can't transfer it(except via bluetooth, which will take really long). Battery's at 0% now so no.
I ve read that for someone work to turning it on in boot mode then plugging into computer
Every time I try it (no batt, up on vol) I get a missing battery sign.
When I try to do it with the battery and plugged in it shows up and I can assign ports but flashtool cannot see it!
Any ideas?
Do you have latest drivers installed?if not install them first.and always keep better in when flashing.
ComradeZ said:
Every time I try it (no batt, up on vol) I get a missing battery sign.
When I try to do it with the battery and plugged in it shows up and I can assign ports but flashtool cannot see it!
Any ideas?
Click to expand...
Click to collapse
It's not really supposed to work with the battery out of the phone anyway.
You are using a USB 2.0 correct? USB 3.0 will not work.
What do you mean flashtool won't see it?
Your selecting the tot file clicking the yellow button and when it says ready you've unplugged and re plugged the device?
Sent from my iPhone using Tapatalk
I'm using 2.0 usb.
How exactly do I get to download mode with battery in it?
Flashtool never gets a yellow go color. It just sits there. When I click go, it fails out.
hyelton said:
It's not really supposed to work with the battery out of the phone anyway.
You are using a USB 2.0 correct? USB 3.0 will not work.
What do you mean flashtool won't see it?
Your selecting the tot file clicking the yellow button and when it says ready you've unplugged and re plugged the device?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Post the screenshots of what you are doing.
Jahanzaibawan said:
Post the screenshots of what you are doing.
Click to expand...
Click to collapse
Nevermind, got a new battery and I was able to go back to stock kitkat just fine. Now problem of getting no OTAs
ComradeZ said:
Nevermind, got a new battery and I was able to go back to stock kitkat just fine. Now problem of getting no OTAs
Click to expand...
Click to collapse
If you don't have at&t sim,you will never recieve updates ota.
Does it need to be activated or can it be just the sim and no plan on it?
ComradeZ said:
Does it need to be activated or can it be just the sim and no plan on it?
Click to expand...
Click to collapse
It must be activated and functional.