Related
I was updating to froyo using the Odin installer and for some reason it stalled. I waited 10 minutes and nothing happened, it was stuck on DO NOT TURN OFF TARGET!! aaand being the genius that I am reset the Odin installer and phone...now I get nothing. The phone is completely unresponsive, no ! screen or anything.
Am I screwed?
edit: sorry for posting this in the wrong forum, please move to Q&A if a mod gets a chance.
close EVERYTHING, take everything out of your phone (sim, battery, and sd card.) then put the battery in but DONT TURN IT ON. have your usb cable ready. hold the two volume buttons down, and then plug in your usb cable to the phone (it should be plugged into your comp) WITHOUT PRESSING ANY POWER BUTTONS. if you get back into downloader mode, you are fine and can then restore using odin or the i click restore
hmmm, well try this take out the battery sim card and ex sd if u got one, open odin, put the battery back in and plug the usb in while holdin the volume buttons, aka download mode... sometimes it doesnt work the first time just try it a couple more...
I did this with my phone. If nothing comes on screen when you plug in the USB cable and entering recovery and download mode don't work, then take thye phone back to AT&T, they accepted my bricked phone back. Just act dumb like you have no clue why it's broken.
I have a similar issue, however I can still get into the downloader..but it just hangs when restoring on factoryfs.rfs....
Any suggestions on that?
hazard96 said:
close EVERYTHING, take everything out of your phone (sim, battery, and sd card.) then put the battery in but DONT TURN IT ON. have your usb cable ready. hold the two volume buttons down, and then plug in your usb cable to the phone (it should be plugged into your comp) WITHOUT PRESSING ANY POWER BUTTONS. if you get back into downloader mode, you are fine and can then restore using odin or the i click restore
Click to expand...
Click to collapse
I cannot explain how much you have just helped me at this moment. I did NOT expect this to work at all, and it did.
thank you, thank you THANK YOU truly
haha well seeing as you're new...
Welcome to the warm hearts at xda-developers
Have I mentioned how good it feels to see resolvable brick threads after the JH7 OTA disaster?
texasryno said:
I have a similar issue, however I can still get into the downloader..but it just hangs when restoring on factoryfs.rfs....
Any suggestions on that?
Click to expand...
Click to collapse
This happened to me as well, is there anything I can do?
jonttu said:
This happened to me as well, is there anything I can do?
Click to expand...
Click to collapse
Try a computer reboot / different USB port... sometimes USB gets interrupted when its flashing in big files like the factory.rfs
Zilch25 said:
Try a computer reboot / different USB port... sometimes USB gets interrupted when its flashing in big files like the factory.rfs
Click to expand...
Click to collapse
Thank you, had to switch the usb to one that was directly on the board, again much gratitude
It seems my phone is fully bricked, I tryed the download method with taking out everything. Nothing turns on, its completley blackscreened. I did have it working, but now its completley unresponsive.
mrbloog said:
It seems my phone is fully bricked, I tryed the download method with taking out everything. Nothing turns on, its completley blackscreened. I did have it working, but now its completley unresponsive.
Click to expand...
Click to collapse
Are you doing the method where you remove the battery first, hold the volume buttons (without power) and plug into USB? That *SHOULD* get you into download mode- if not, maybe check a different USB port.
Up and running, with Froyo to boot! Thanks again and good luck to those with problems. Thanks for the welcome again and I've made a donation in the site for saving my ass $500
HELP please HELP !!
I upgrade to Froyo and then wanted to go back to 2.1. The problem now I can only boot into download mode, but I tried to load other roms (one click, odin i9000 and Froy) and nothing happens! need help please!
dude, i love you for this.
monkas said:
I upgrade to Froyo and then wanted to go back to 2.1. The problem now I can only boot into download mode, but I tried to load other roms (one click, odin i9000 and Froy) and nothing happens! need help please!
Click to expand...
Click to collapse
Can you clarify? Did you successfully upgrade to froyo or incur and error somewhere in the process. When you say that "nothing happens" what exactly does that mean?
What does ODIN show when you try to upload?
vsboxerboy1 said:
Can you clarify? Did you successfully upgrade to froyo or incur and error somewhere in the process. When you say that "nothing happens" what exactly does that mean?
What does ODIN show when you try to upload?
Click to expand...
Click to collapse
Upgrade to Froyo successfully. Want to go back to 2.1 after using One Click Odin JF6 rom, it never ends. Following on from here, probe with OCD Froyo, eclair, odin and any rom could do to finish flashing. He stays in zImage and shows the status bar.
Any idea I can try?
monkas said:
Upgrade to Froyo successfully. Want to go back to 2.1 after using One Click Odin JF6 rom, it never ends. Following on from here, probe with OCD Froyo, eclair, odin and any rom could do to finish flashing. He stays in zImage and shows the status bar.
Any idea I can try?
Click to expand...
Click to collapse
This may seem elementary but I noticed your tag says your location says Buenos Aires. Are you sure you have a Captivate and not an i9000?
JOe K. said:
This may seem elementary but I noticed your tag says your location says Buenos Aires. Are you sure you have a Captivate and not an i9000?
Click to expand...
Click to collapse
Guys, good news! I recovered the phone and install Froyo. My error was that it came to how to download and then disconnect the USB and reconnected.
Joe K Captivate works perfect in Argentina because it uses the same bands as AT & T, send me a friend who lives in NYC, obviously unlocked.
Thank you all for your concern, I return to live!
I need HELP!!! noob here and i tried to flash froyo 2.2 onto my mesmerize like an idiot! had no idea what i was doing, so if the phone is unrepairable , its my own fault. please save the bashing on me, trust me i know im an idiot!! ok what i did was try to flash froyo 2.2 to my phone with odin 3 v1.0. I put my phone into download mode and it started to flash. about 2 minutes into it it powered off and now when i start it up it reads at&t world phone!! I flashed froyo 2.2 from a captivate onto my phone??? like i said total noob and i guess i deserved it. now when i start up the phone it thinks it is an at&t captivate. when i try to hook the usb up, it will connect for about 5 seconds and then power off. is there anyone out there that can help me? i will be eternally grateful to anyone that can help!
mooskafooska said:
I need HELP!!! noob here and i tried to flash froyo 2.2 onto my mesmerize like an idiot! had no idea what i was doing, so if the phone is unrepairable , its my own fault. please save the bashing on me, trust me i know im an idiot!! ok what i did was try to flash froyo 2.2 to my phone with odin 3 v1.0. I put my phone into download mode and it started to flash. about 2 minutes into it it powered off and now when i start it up it reads at&t world phone!! I flashed froyo 2.2 from a captivate onto my phone??? like i said total noob and i guess i deserved it. now when i start up the phone it thinks it is an at&t captivate. when i try to hook the usb up, it will connect for about 5 seconds and then power off. is there anyone out there that can help me? i will be eternally grateful to anyone that can help!
Click to expand...
Click to collapse
If you didn't flash anything to the phone part, you might still be ok. Go here http://ge.tt/2jDX1li and download the Mesmerize files then unzip them. Using Odin again put the pit file in the pit line and the tar.md5 file in the pda line, then put your phone into download mode and push start. If all goes well, you will just be back to stock.
i cant get into download mode the regular way. the only way i have found to get into download mode is to use adb download. when i do that, my PC will not recognize the phone. i get the usual connection sound from computer but that's it. oh and thank you for the files. now just gotta get the phone to stop powering off. like i said 5 seconds max then it powers off, arghhhhhh!!!!!! oh, and also for some reason after the disastrous flash, the volume up button doesn't work. if the phone thinks its a captivate, do i have to get into download mode how the captivate does with both volume up/down? thank you millions!!
mooskafooska said:
i cant get into download mode the regular way. the only way i have found to get into download mode is to use adb download. when i do that, my PC will not recognize the phone. i get the usual connection sound from computer but that's it. oh and thank you for the files. now just gotta get the phone to stop powering off. like i said 5 seconds max then it powers off, arghhhhhh!!!!!! oh, and also for some reason after the disastrous flash, the volume up button doesn't work. if the phone thinks its a captivate, do i have to get into download mode how the captivate does with both volume up/down? thank you millions!!
Click to expand...
Click to collapse
You can try the volume up/down. If it is taking adb commands and still powering off, you may have a problem. Did you flash anything to the "phone" part or just the PDA part when you were flashing the captivate files? If you did, or you can't get these files to work, the only thing I can suggest is to use the free phone replacement. Just don't offer any explanation as to what happened.
ok i guess i flashed to the phone. tried all the download modes, phone dosent react. i can get to android system recovery, is there a way to load the stock mesmerize from the file you mentioned before in recovery? as far as the phone replacement goes, are you refering to the deal us cell has if you get it in your plan, or is there some other replacement yo are referring to?
mooskafooska said:
ok i guess i flashed to the phone. tried all the download modes, phone dosent react. i can get to android system recovery, is there a way to load the stock mesmerize from the file you mentioned before in recovery? as far as the phone replacement goes, are you refering to the deal us cell has if you get it in your plan, or is there some other replacement yo are referring to?
Click to expand...
Click to collapse
Yeah I'm referring to the deal you get with the plans, hopefully you have the replacement plan or insurance. Either one should work.
If you are getting to stock recovery, and you can still run adb commands, there may be hope. You might be able to get Clockworkmod working, then you could flash the update.zip from recovery. After that, you might be able to flash a ROM and a kernel and possibly get back to normal.
You would have to push the files to root, then for CWM, then get the update.zip file from another person that already has it if you hadn't already gotten CWM working and still had it on your sdcard. Flash it, then flash a ROM and kernel.
That's a little over my paygrade at the moment, but I think that's what you would have to do. Hopefully someone else out there can help you a little more. I really hope you get it fixed.
ok i understand what you're saying. ill give it a try and see what happens. thanks again
mooskafooska said:
ok i understand what you're saying. ill give it a try and see what happens. thanks again
Click to expand...
Click to collapse
Cool. I really hope you get it fixed. If so, write it up and post exactly how you got back. It would be a huge deal.
Sent from my SCH-I500 using XDA App
mooskafooska said:
ok i understand what you're saying. ill give it a try and see what happens. thanks again
Click to expand...
Click to collapse
Did you ever get this fixed?
not yet. i could fix easy if i could figure out how to keep my phone from shutting down after connecting to usb. it lasts about 5 seconds and then powers off. when i flashed it, i only got about 23% of the way done and the phone disconnected. i guess i has some sort of error or fail safe and shuts down? if i could figure this part out, i could use odin 1.3 to put it back to stock
Try talking out battery hold down volume down and plug in usb while odin is open it will go into download mode then use the mez odin files it should work merry christmas
Sent from my SCH-I500 using Tapatalk
mesmerbelly said:
Try talking out battery hold down volume down and plug in usb while odin is open it will go into download mode then use the mez odin files it should work merry christmas
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
I don't think talking to the battery will work. They are pretty stubborn. lol... damn phones and their predictive text.
That is correct that "TAKING" the battery out and hold only down volume button then plug in to usb and have ODIN already open and running, should work and also very important that you use PDA BUTTON ONLY....even thought you used PHONE EARLIER ....THE REPLACEMENT FILES FOR STOCK ONLY GO IN PDA....Dont want to make the same mistake twice....as it may seem that phone is the area that you messed up...the fix doesn't go there...PDA ONLY WITH PIT FILE TO MAP FILE LOCATIONS.....hope your Xmas present is a fixed mesmerize....
Sent from my SCH-I500 using Tapatalk
ok i finally got the captivate os off of it. i can get into download mode and i tried to flash back to stock using the file above in the post. i keeps failing on me. im using odin 1.3 and using both the pit file and tar. putting the .tar in the pda area of odin. please help?
OMFG!!!!!!!!!! i got it! i love u guys for all the help!!!!!!!found odin ver 1.7 on this post
http://forum.xda-developers.com/attachment.php?attachmentid=428348&d=1288241246
used it got no errors and im on the phone with uscc right now to reactivate the phone! and of course running titanium backup to get all my files back. best xmas ever!!!!!
thanks again!!!!!!!!!!!!!!
You are so lucky! I'm so have you got it fixed. You have to write this up in another thread as a tutorial.
Sent from my SCH-I500 using XDA App
im having hard time to get the phone out reboot loop att. i put my phone in download mode then right click run admin odin3 one click and plug it then start when it done it said RESET and my phone reboot but it keep looping at ATT logo. any idea what wrong.?
Yea, you 'soft bricked' your phone. I did that myself 2 weeks ago. Can you still get into download mode? It might help us, but what build # is your phone (the number is underneath the battery with all the other info), its either 1005, 1006, 1007, 1008, 1009, 1010. If you have a 1010, you might need to make a jig.
Breakin' Ranh said:
Yea, you 'soft bricked' your phone. I did that myself 2 weeks ago. Can you still get into download mode? It might help us, but what build # is your phone (the number is underneath the battery with all the other info), its either 1005, 1006, 1007, 1008, 1009, 1010. If you have a 1010, you might need to make a jig.
Click to expand...
Click to collapse
i did make a jig already and im in download mode but it keep in the att loop if i unplugg the usb. it still in the usb it will be battery with loading loop. this driver my crazyy.
also when im done with odin3 all it say RESET and Removed!!. if i unplug it will said PASS if not it will just looping the battery with loading icon
tonyph33r said:
i did make a jig already and im in download mode but it keep in the att loop if i unplugg the usb. it still in the usb it will be battery with loading loop. this driver my crazyy
Click to expand...
Click to collapse
Try this
Open odin
remove batery out of your phine as well as sim and ext sd
Plug in usb
While holding volume up and down put batery back in
Hourly you will go into download mode and odin will recognize your phone
Sent from me
What batch/build # is your phone?
tonyph33r said:
i did make a jig already and im in download mode but it keep in the att loop if i unplugg the usb. it still in the usb it will be battery with loading loop. this driver my crazyy.
also when im done with odin3 all it say RESET and Removed!!. if i unplug it will said PASS if not it will just looping the battery with loading icon
Click to expand...
Click to collapse
hmmm thats very odd, try mcord's method, i was able to do that method once when i looped my phone. i think your phone doesnt like odin 1-click. so its either a 1009 or 1010 build. look at my method once you get your phone into download mode again.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
And how is it that once you unplug your jig, it starts to loop again? can you elaborate more on that? Because the jig is there to get it into download mode and then you plug your phone into the computer and then use odin.
Breakin' Ranh said:
hmmm thats very odd, try mcord's method, i was able to do that method once when i looped my phone. i think your phone doesnt like odin 1-click. so its either a 1009 or 1010 build. look at my method once you get your phone into download mode again.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
And how is it that once you unplug your jig, it starts to loop again? can you elaborate more on that? Because the jig is there to get it into download mode and then you plug your phone into the computer and then use odin.
Click to expand...
Click to collapse
thank you a lot breakin Ranh your link it work prefect. Odin3 one click it didnt work for the 1010 build. Thank you again very much
tonyph33r said:
thank you a lot breakin Ranh your link it work prefect. Odin3 one click it didnt work for the 1010 build. Thank you again very much
Click to expand...
Click to collapse
No problemo, I had a feeling that would do the trick. I really need to make my guide a sticky for all the new captivate users because the recent build numbers 1009 and 1010 are just not odin 1 click compatible. If you have any problems, don't hesitate to ask the forum or just private message me. And you're very welcome, glad to see another unbricked captivate in the world haha.
Breakin' Ranh said:
No problemo, I had a feeling that would do the trick. I really need to make my guide a sticky for all the new captivate users because the recent build numbers 1009 and 1010 are just not odin 1 click compatible. If you have any problems, don't hesitate to ask the forum or just private message me. And you're very welcome, glad to see another unbricked captivate in the world haha.
Click to expand...
Click to collapse
hey breakin ranh do u have another link for JH7_OTA.zip cuz that link it wont work or slow download then it pingout? megaupload link would be great
I'll upload it to megaupload and link it, give me 30min.
*Done!*
http://www.megaupload.com/?d=PE3U6197
Hello,
I am running a samsung captivate galaxy S and I was changing the kernal and I am not sure what I did wrong but when I flashed the zip file and my phone rebooted, it froze on the, Trident screen and now I cant get my phone into recovery mode or downloading mode. What can I do to fix this problem?
thanks
donte54 said:
Hello,
I am running a samsung captivate galaxy S and I was changing the kernal and I am not sure what I did wrong but when I flashed the zip file and my phone rebooted, it froze on the, Trident screen and now I cant get my phone into recovery mode or downloading mode. What can I do to fix this problem?
thanks
Click to expand...
Click to collapse
so you flashed a gingerbread only kernel and wonder why it broke?
I just wanted to know if there was anyway just to get my phone back to normal
build date of your phone please? You may be in for a jig..........
This is why we read before we flash our phones............
How can I find out the built date?
donte54 said:
How can I find out the built date?
Click to expand...
Click to collapse
pull the battery out of the phone.
At the end of the serial number you will see a number xx.xx that is the build date.
If we get it back up and running......you have to promise you are not gonna mess with it without reading on this site for at least 2 days......and learn everything you need to know....Bricks are not fun.....especially when you don;t know what to do
lol! yeah i leaned my lesson for good!
WHen I pulled out the batter and on the back of the phone I have: R5YZ89664V ....with a long space and a ZK at the end and off to the side i see a 1008 REV 0.4
1008 has the 3 button combo disabled by default........You may be learning a harder lesson than you thought....
If this doesn't work you are going to be buying a jig.......
1.) open odin (I'm assuming you have odin)
2.) pull the battery from your phone
3.) hold vol + and vol - (through steps 4 and 5)
4.) plug in the usb cable
5.) put the battery in the phone.
This should trigger the phone into download mode. and Odin should recognize it.
I will give that a shot and if it doesnt work then I need to get a jig?
donte54 said:
I will give that a shot and if it doesnt work then I need to get a jig?
Click to expand...
Click to collapse
Yeah....AND that will give you lots of time to learn about the do's and don'ts.
awesome thanks!
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
dustin4863 said:
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
Click to expand...
Click to collapse
just curious what methode are you using to enter download mode? Did you try recovery for giggles?
i have tried both download mode and recovery and just trying to let it boot up normal and it will not do anything in all three just a black dead screen
Try leaving the battery in when you go to download mode. Also leave it in when flashing.
if it wont even power on in any way or go into the download mode you might be bricked...I did this before and I had to exchange it at Verizon..luckily since it wouldnt turn on they couldnt tell what I did to it...hope you can get your issue resolved
Ha a true brick. Finally someone using the terminology correctly. A buddy of mine has this happen with his galaxy s. He got it exchanged in store no questions asked. btw Sorry to hear about your phone
Sent from my ADR6350 using XDA App
1/2 Brick
Hi
Sorry to hear about your issue. I am at half brick now. Been at multiple spots learning here but never completely no visability! 3/4, 7/8, right now in a flash it does not see my phone (no network) data side is fine but can not get or receive calls. It is not the SIM card (according to VZW). Data side works fine 4G etc, emails but no phone. A great PDA but not a phone. No one has answers but I belive to be a cp_modem.bin issue download hangs at around 98% in what does a boot 2nd boot on the screen in the download then says:
Wait, VIA Booting ..
VIA rest done. ..
Downloading to VIA...
To everyone the {Kangfuscius.tar} has helped me when I thought all hope was lost, even in a partial download it helped to bring me back.
Any suggestions on files for the phone tab in ODIN all I can think of is, it can't get worse. The FEDEX guy kow knows me by name between the Fascinate's and now I guess the Charge.
Any help appreciated,
norm883
norm883 said:
Hi
Sorry to hear about your issue. I am at half brick now. Been at multiple spots learning here but never completely no visability! 3/4, 7/8, right now in a flash it does not see my phone (no network) data side is fine but can not get or receive calls. It is not the SIM card (according to VZW). Data side works fine 4G etc, emails but no phone. A great PDA but not a phone. No one has answers but I belive to be a cp_modem.bin issue download hangs at around 98% in what does a boot 2nd boot on the screen in the download then says:
Wait, VIA Booting ..
VIA rest done. ..
Downloading to VIA...
To everyone the {Kangfuscius.tar} has helped me when I thought all hope was lost, even in a partial download it helped to bring me back.
Any suggestions on files for the phone tab in ODIN all I can think of is, it can't get worse. The FEDEX guy kow knows me by name between the Fascinate's and now I guess the Charge.
Any help appreciated,
norm883
Click to expand...
Click to collapse
I don't know why your phone is booting into 'VIA' mode and don't even know what that is so I couldn't say a fix other than odining the usual stock rom/pit combo (leaving the battery in when flashing in odin also and uncheck the 'auto reboot' option)... also phone tab/button is NOT supposed to be touched in odin, only PDA, PIT if needed, and Start
Where did it fail in the Odin flash? The only way you should be bricked is if it failed while flashing boot.bin or sbl.bin, otherwise, it should still go to download mode. Have you tried using one of the Force Download Mode jigs/dongles that the GSM models use to get into download mode?
i don't recall where it failed at but it will not not respond to anything with batt or without where can i find the gsm software i will give it a try before i call insurance a link or anything would be great
what gsm models are equivalent to the charge
dustin4863 said:
i don't recall where it failed at but it will not not respond to anything with batt or without where can i find the gsm software i will give it a try before i call insurance a link or anything would be great
what gsm models are equivalent to the charge
Click to expand...
Click to collapse
Infuse 4g or SGS 2 unlocked.
Sleek69 said:
Infuse 4g or SGS 2 unlocked.
Click to expand...
Click to collapse
SGS2 is not equivalent. Just search for galaxy s download jig and i'm sure you'll find what I'm talking about. It is the same thing for all the SGS phones, and some have said it works on the 4G versions of the phones as well.
dustin4863 said:
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
Click to expand...
Click to collapse
Hi, I had the same thing happen to my first Charge. I could not boot my phone even to the samsung logo, so I searched around the Internet. Somehow I think it was the Captivate trick worked. I took out sim, battery, sdcard>plugged in usb to computer>held up and down volume together>put in battery; miraculously it went to download. I tried every other combination beforehand and none worked, so I know this method works.
Unfortunately this was before we had IMNUTS Pit file and a odin flash would not change anything so I could not recover and I flashed a Pit that was not for the Charge. Wrong answer! After that it was in the non-boot state again but the same method above would not work any longer. If your phone does not work with the method above, maybe something went wrong with the repartition and pit file. That is just a guess though!
well the jig hasn't worked yet i am running right at 300k tomorrow i am going to get a 1k and add that in also and see if that helps. also pulling all the cards and the battery didn't work either. this is not looking good i am up for any ideas that anyone has
thanks
dustin
Hey guys found a way to unbrick Samsung droid charge and revert back to stock.
1. Download and install Odin found here ( http://forum.xda-developers.com/show....php?t=1085190 ) unzip and open
2.Download this file and unzip ( CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5.7z) from here ( http://www.multiupload.com/6WJ2SFUKO6 ) or original thread where i found this file is from here ( http://androidflip.com/android-2-3-4...talling-guide/ )
3. set phone to download mode, do this by taking battery of phone, plug phone into computer and hold Volume down, a Yellow triangle with a working android will appear.
4. Click on odin you will see your phone come up under ID:COM, now do not click on anywhere but on PDA thats where you will have to find the file you downloaded on step 2 and make sure is the unzipped file. once u find it, click on open then start.
5. Be patient this can take up some time, once is done the box will turn green and say pass, at this time your phone will no longer have the Yellow triangle and you can unplug and place the battery back in and turn phone on.. once again be patient when turning phone on it will take a little while to complete.
i tried this and it does work, my Droid charge was bricked and now it works.
Thanks to xda-developers where i was able to find odin and also thanks to androidflip.com where i was able to find the Droid Charge stock rom to flash it back using odin.
Hope this helped everyone needing help.
dustin4863 said:
well the jig hasn't worked yet i am running right at 300k tomorrow i am going to get a 1k and add that in also and see if that helps. also pulling all the cards and the battery didn't work either. this is not looking good i am up for any ideas that anyone has
thanks
dustin
Click to expand...
Click to collapse
Dustin, were you able to get it working? I'm in the same boat. Right after boot.bin it failed. Which was within seconds after hitting the start button in Odin. Verizon won't honor my warranty, because I didn't buy the phone from them.
Hard Brick Fixed
If you are truly hard bricked (no download mode, no power, no nothing), you can get it fixed for $40 at mobiletechvideos.com. I flashed a file that didn't work unless I took off the md5 extension. Big mistake. After trying absolutely everything, including surfing the internet for a day, spending almost $20 to get 2 day delivery for a USB Jig that did absolutely nothing, I sent my phone to mobiletechvideos.com. Josh brought it back from the dead; don't know how, but it was the best $40 I ever spent! I think there aren't any reviews because there haven't been enough newbies like me who just can't wait for Gingerbread and bricked their Samsung Charge. Putting my review there tonight...should be first one. The reviews from all the other phones he has unbricked convinced me to try and I'm glad I did.
Many people have hard bricked their phones trying to downgrade. Give the jig a shot, but don't hold out much hope.
Personally I think there is something being overlooked during the downgrade process... Too many people are hard-bricking during the process for it to be coincidence.
Oh yes
mgsparro said:
If you are truly hard bricked (no download mode, no power, no nothing), you can get it fixed for $40 at mobiletechvideos.com. I flashed a file that didn't work unless I took off the md5 extension. Big mistake. After trying absolutely everything, including surfing the internet for a day, spending almost $20 to get 2 day delivery for a USB Jig that did absolutely nothing, I sent my phone to mobiletechvideos.com. Josh brought it back from the dead; don't know how, but it was the best $40 I ever spent! I think there aren't any reviews because there haven't been enough newbies like me who just can't wait for Gingerbread and bricked their Samsung Charge. Putting my review there tonight...should be first one. The reviews from all the other phones he has unbricked convinced me to try and I'm glad I did.
Click to expand...
Click to collapse
Doing so NOW! For the same issue. My PC decided to spontaneously reboot during ODIN while flashing a ROM on My Droid Charge. Josh was quick to respond to EVERY single annoying question I had about their service. So I am doing so. If it works, I'll tell you, I'm adding a link to their site in my signature on every forum I'm a member of, even forums I have for my daughter's schooling hahaha! They deserve the references just for being quick to respond. Thanks for the info man, props to you.