Database Info

[Q] please help..my lg optimus one p500 is hardbricked

i installed sweetsnour kernel in my lg optimus one p500 through rommanager application...and now touchpad of my mobile is not working and it doesn't respond for calls eventhough sim is inside..please help me sir!!!

Try not to use rom manager for anything. It has been known to brick our phone. If you have a backup of your working rom, restore from your recovery. Else clean flash the rom zip again. This will over write your bad kernel flash with the default kernel of the rom.
Sent from my LG-P500

pmvyas said:
Try not to use rom manager for anything. It has been known to brick our phone. If you have a backup of your working rom, restore from your recovery. Else clean flash the rom zip again. This will over write your bad kernel flash with the default kernel of the rom.
Sent from my LG-P500
Click to expand...
Click to collapse
how to flash the rom zip...i don't know..pls tell me..i don't have the backup of my working rom and i didn't enable usb debugging option in my phone because its touch not working..so pls tell me the solution!!

Seems you have not installed a custom recovery. Is your phone rooted?
Sent from my LG-P500

yes' my phone is rooted

Any custom recovery like cwm or AmonRa? Else try factory reset. 3 button combo of vol down + home + power I believe ! Keep pressed all three buttons for 5 secs. No harm to try.
Sent from my LG-P500

If you don't have custom recovery, then try this and install a custom recovery like cwm or amonra.
https://play.google.com/store/apps/details?id=acr.recovery.installation.utility&hl=en
.
Description
* ROOTED USERS ONLY *
(Please read everything below before installing)
This is a recovery flasher to help users flash a custom recovery to their rooted device using the flash_image binary.
DIRECTIONS (IMPORTANT):
1. Download a recovery compatible with your device (search online)
2. Place the recovery image on your sdcard/external storage
3. Rename the recovery to "recovery.img" all in lowercase
4. Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for all the toasts to go away or it might not flash right)
5. Reboot into your new recovery if you wish
WARNING: I am not responsible if you brick your phone using an incompatible recovery. This app only assists you in flashing a recovery and is not associated with the recoveries you flash.
* PLEASE READ *
Confirmed to work on LG Optimus variants. If the app fails to detect the flash_image binary, there is a high chance that this app will fail to work. However, if you know your device has the binary installed, you can still use it, the app will just complain.
Do not download if you are not rooted.
PERMISSIONS - WRITE_EXTERNAL_STORAGE: used when installing the flash_image command
- Anthony
.
Or you can try this one also
http://forum.xda-developers.com/showpost.php?p=28775193&postcount=1
LEDelete said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello world !!!
I'm very happy to present you a project of a new kind : The RecoverX Project
The goal of this project is to gather ALL the recoveries for ALL android devices in ONE tool which install them on the devices. RecoverX is coded in C++ thanks to QtSDK and allow to install a recovery on more than 150 different devices !!!
You just have to select your phone and your recovery, to click "Install" and RecoverX does the rest, It's as simple as that
This program have been published on XDA News : Here
Behind this tool : over 120 - 180 hours of work, 4200 lines of code and +350 uses by day !!!
Here is the list of the recoveries which are available :
This program require different prerequesties, depending of your device
- Wether you need an unlocked bootloader to flash the recovery partition (and fastboot drivers on your PC)
- Wether you need root access and usb debugging activated (if busybox is not installed, RecoverX will ask you the permission to install it).
PS : On the first lauch, the download may fail, please, try to restart the program again.
DOWNLOAD​
RecoverX v1.6.5.0 : http://ledelete.atspace.co.uk/recoverx/download.html​Supported devices​
FEEDBACK​
​PREVIEW​
Here is some screenshots
THANKS​
The CWM team, for their recovery
nobodyAtall & Zihu for their based-recovery
Amon_RA, for his recovery
PvyParts, who have help me to fix the ICS support bug
If you want me to add an other recovery for your device or a new device, just write me the address of the recovery's post and I'll add it into RecoverX :fingers-crossed: .
If you have any suggestions or you want to report a bug, just write above this post !!!
To finish, I can only anwer to PM on the week-end so... be patient !!!
PS : Donations are volunteer but allow me to spend more time on the project
Click to expand...
Click to collapse

(ROM)BimalHort Custom rom for Samsung galaxy Star Pro Duos (GT-S7262)

BimalHort Custom ROM release 1.0
For Samsung Galaxy Star Pro Duos (GT-S7262)
Android JB 4.1.2
(Before do anything you should backup your data, everything, as flashing this rom will wipe your sdcard)
This is based on SamMobile Latest Stock Rom [S7262XXUAMK2]
Android JB 4.1.2 Release Apr. 28, 2014
Screenshots:-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM INFORMATION :
-Pre-Rooted SuperSU-v2.01
-Deodexed
-Debloated
-init.d Support
-Transparent Status Bar.
-White Icons in Status Bar
-No AM/PM in Status Bar and Pulldown.
-Transparent Accuweather
-Double tap statusbar to sleep
-No log of messages
-Redesign Phone, Contacts
-0.00KB/s meter on statusbar
-Permanent disabling of SMS, MMS & Email log history to be logged in call logs
-23 toggles notification panel (Lidroid way)
DOWNLOAD LINK :
File: bima[lhort_v1.zip
Size: 435MB
Download BimalHort custom rom v1
PREQUISITES :
1. Samsung Galaxy Star Pro duos (GT-s7262).
2. CWM installed.
3. External sdcard
3. Click the THANKS button
HOW TO INSTALL :
1. Be sure you are ROOTED first and have CWM Custom Recovery.
2. Put " bima[lhort_v1.zip " file in root of your external sdcard.
3. Boot into CWM Recovery mode (POWER + VOL UP + HOME)
3. Wipe Data/Factory Reset.
4. Wipe Cache Partition.
5. Advance->Wipe Dalvik Cache->GoBack
6. Install zip
7. Choose zip from /external_sd
8. choose " bima[lhort_v1.zip ".
7. Wait till it finish.
8. Wipe Cache Partition Again.
9. ENJOY
Note :
1. While booting for the first time it may take a while ,so please be patient.
2. As usual, do a backup first.
3. When flashing new ROM, your data, games, info from your phone will be erase, if you want to retain it, do a Titanium backup or any backup software then restore this backup after flashing ROM.
4. 1st time remove the accuweather and search widgets from homescreen, then again place them.
CREDITS:
@ dsixda
@ Chetan21
@ bombaybadboy
@majdinj
@BOOTMGR
@ Ticklefish
@renzorampas
ME and YOU for clicking THANKS button

For future use........

Bimalhort said:
For future use........
Click to expand...
Click to collapse
not great this much tweak can be done with xposed framework app then why to waste 5oo mb for downloading this rom

I have modified the system files for better use, I am not a developer. Developers do not try for this low-end mobile.

well i tried this rom can u do smthng more and btw playstore is not working

Some1 understands! Atleast.
Bimalhort said:
I have modified the system files for better use, I am not a developer. Developers do not try for this low-end mobile.
Click to expand...
Click to collapse
Yeah dude,,, ur rright!

nice rom bro keep it up

abhishekpandey.468 said:
not great this much tweak can be done with xposed framework app then why to waste 5oo mb for downloading this rom
Click to expand...
Click to collapse
Okay then you should develop something by yourself and use it. Why are you making others crazy instead of appreciating their work???

[Huawei Y530] Development, Rooting, Backups, etc.

[WIP] Clean Huawei Forum: Last Update: 24.6.2015
Hello Everyone! VisualTech48 here.
I'm a proud owner of our beloved phone Huawei Y530, and yes, we already have a thread, but its unclean, and hard to find some things, so with the approval of a mod, I'm here to gather everything on the first post so everyone doesn't have to go searching and asking if it works.
In addition here will be also posted any ROMS people make, till we get our official forum.
CyangoenMod Status:
Currently Booting is possible but there is a lot of work needed to be done.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are going to start with CM11 first, as PieroV and CENTSOARER agreed
PieroV said:
I don't think that CM12 will be ported... I'm still on the idea that CM11 has to come first.
I'm gonna borrow another phone from a friend, because I can't be without the phone for many hours...
Click to expand...
Click to collapse
CENTSOARER said:
@PieroV yes, I think CM11 is the way, too.
Click to expand...
Click to collapse
Custom ROMS:
■ Currently non available
Clockwork Recovery v6.0.5.1:
■ Download the ZIP and extract it on desktop
■ Open the CWM-Recovery6.0.5.1.exe
■ Power off your phone, and make sure that fast boot in developer options is disabled
■ --To go into fastboot mode, hold Volume Down(-) and power button. White screen should appear in a few seconds.
■ Press 1 to test it out first, if it works you can flash it with 2 again.
■ Enjoy your CWM
A more detailed guide and credits goes to (himister) for making the flash app, and his post here
Clockwork Recovery.zip
*Requirements: Flashing CWM requires a Unlocked phone and Huawei drivers installed for ADB
Nandroid backups [Restoring if your phone has issues]
■ CENTSOARER: B512 - Orignal Post - Download
■ Alfcup - B512 - Orignal Post - Download
Offical ROMS
Can be found here (Thanks himister): http://susutun1.blogs.com/.../530group.html
Upgrading System guide (DLOAD):
Dload is the way we upgrade frimware in Huawei. To flash a new version of the OS you first need to check what version you have. You can do that by going on your phone and open the SYSTEM Update app.
Image_01
The reason why you have to check this, is due to you cannot flash an lower version. So if you have B179, you cannot flash B177. Keep that in mind as, if you do try to flash it will show you an error.
When you download the new frimware bear in mind to put the dload folder in the root directory of your SD-Card.
Example: /sdcard1/dload
After you have placed your folder, go to the SYSTEM Update app, and press Local Update and comfirm.
Image_02
Rooting Wiki [More detailed guide]
Start by downloading and installing towel root and KingsUser here:
■ http://towelroot.org/Towelroot.apk"]TowelRoot
■ KingsUser
First open towelroot and press "Make it ra1n". If it says sucessful root, you can proceed and go to KingsRoot.
NOTE: Do not update Kings root, you will be offered to fix your root, just press yes. After it finishes, your phone is rooted!
If I forgot something fell free to write it down, this post will be updated as much as it can.

Reserved.

Can you put the latest b515 firmware link for upgrading with dload method

[Completed] [RECOVERY][CTR-v3,v3.3][PORT][KITKAT] Carliv Touch Recovery for Wiko Rainbow

DISCLAIMER:
Rooting your phone and using custom Recoveries and ROM's have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledge about the phone and phone utilities also.
Make sure that whatever you do, you are doing it at your own responsibility.
REMINDER!!!
THIS THREAD IS INTENDED TO WIKO RAINBOW USERS ONLY!!!
FOR THOSE WHO ARE NOT WIKO RAINBOW USERS, DO NOT TRY FLASHING THIS RECOVERY TO YOUR PHONE BECAUSE IT WASN'T MEANT FOR YOUR DEVICE!!!
IF YOU WANT TO PORT THIS RECOVERY TO YOUR DEVICE GO
->HERE - @carliv's main thread for ctr recovery
->HERE - @carliv's porting guide
Don't forget to give thanks to them
It is a CWM based recovery and is compatible with any other CWM based recovery. It works with KITKAT kernels. In this version I used Napstar-xda's full touch module as base. The navigation it is posible by touching the menu item. In long display menu (as choose zip from sdcard) for scroll page down Swipe Right and for scroll page up Swipe Left. For Go Back also Swipe Left.
If the Swipe doesn't work (usually if your phone is multitouch but has only 2 points of touch), use bottom virtual navigation keys or volume buttons Down for Scroll down, Up for Scroll up, and the back button for Go Back.
Version 3.3 update (21-apr-2015):
This is the last batch of builds for porting. I won't do that anymore.
- many fixes in code;
- cleaned up the source code;
- reset battery stats option;
- wipe all - preflash option;
- removed nvram backup/restore because it can corrupt the bootloader;
-full track of changes here.
Click to expand...
Click to collapse
INSTRUCTON FOR INSTALLING IT!
OPTION 1:
Use MobileuncleTool or Rasher (Both of them can be downloaded at Google Play Store so do not bother asking for the link of this two apk's)
In MobileUncleTool:
1. Rename the "CTR_Recovery_v3.3_wiko_rainbow.img" into "recovery.img".
2. Put recovery.img in the root of your sdcard (/sdcard/recovery.img).
3. In the tool just go to recovery update then you wil automatically see the recovery.img then flash it and wait until it finished.
4. Reboot to recovery.
In Rasher:
1. Its ok if it is not renamed or in the sdcard root, just simply select recovery then locate the recovery image file and flash it.
2. Reboot to recovery.
OPTION 2:
Via SmartPhoneFlashTool(SPFT)
1. Locate MT6582_Android_scatter.txt
2. Only Tick the RECOVERY then locate the recovery image.
3. Press Download and wait till flashing finished.
4. Reboot to recovery.
SELECT VERSION OF CTR YOU WANT TO FLASH:
1. CTR RECOVERY V3
2. CTR RECOVERY V3.3
3. Carliv CWM*T Recovery v1.0 (On-going still asking permission to @carliv for porting it but as of now I was able to boot into it but the only problem is the sdcard0 path are not mounted and also the Advance Menu are not working)
NOTE: Any of the two CTR's are now able to flash CM12.1 Alpha 3[LP] by @moonrotation and PACMAN 5.1.1[LP] by @Sandeep5303. I already tested it so don't worry.:good:
To get aroma file manager to work you need to flash the zip below. -> HERE
Credits to:
-Sir @carliv for the porting guide, tools and to his helpful threads.
-Also @Kyzrael (ME) for porting this two recovery. The ctr v3 and ctr v3.3
( Hit Thanks to this thread if you find it helpful )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADD ONS: If you used this recovery and you find some problem with it don't hesitate to approach me so that I can pinpoint the problem or reprocess the whole porting process to fix the issues that you may find. Remember, I spent two days just to finish this two ctr to port and make it work to our device.
-Other Clone Phones Related to Wiko Rainbow was also get it working if you flashed Wiko Rainbow v13 firmware.
-Btw, I am using MyPhone Agua Rio and I was able to get it work because I am using Wiko Rainbow v13 firmware.

Great dude!
Sent from my WIKO RAINBOW using Tapatalk

Sandeep5303 said:
Great dude!
Sent from my WIKO RAINBOW using Tapatalk
Click to expand...
Click to collapse
haha thanks :good:

Mod Edit
Please continue this discussion here:
http://forum.xda-developers.com/android/development/recovery-carliv-touch-recovery-wiko-t3158045
Thread closed
malybru
Forum Moderator

[Recovery][Unofficial][Marino]TWRP 3.1.1-0 for Lenovo K8 Plus XT1902-2

Team Win Recovery Project 3.x.x is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prerequirements:-
1. Your Bootloader must be unlocked. Here is the guide
2. Internal Storage will be wiped.
Bugs:-
1. Battery Percentage doesn't show
2. You tell me
Instructions:-
1. Go to the fastboot mode.
2. Now paste the recovery in adb folder.
3. Open the cmd by holding shift and press right click in adb folder and then click open command promote here.
4. Now to confirm that device is connected properly type:-
Code:
fastboot devices
You'll get your device serial number there.
5. After that type:-
Code:
fastboot flash recovery twrp-3.1.1-0-marino.img
Voilà TWRP flashed successfully.
6. Now unplug your device and then hold power button for 2 secs and then hold volume (-) after that press power button once.
Now you'll find yourself in TWRP.
Enjoy
Links - https://drive.google.com/uc?id=1JYzRlnfLRJRsw3flQhXaorSxeqS5umRK&export=download
Note:- After flashing recovery you must have to wipe Internal Storage to remove encryption. Also, you must have to flash magisk so that it will patch boot.img through which system will not be able to overwrite TWRP again.
Credits:-
Gaurav
Dhruv Agarwal (me)

thanx a lot brother for working on it ..
may be we will get a custom rom soon ???

Finally, something for k8 plus users,
Is there any safe way to relock bootloader after unlocking and flashing this recovery, if I want to take my device to service centre

Thanx

What is the dycrept password?

biswajitpaik said:
What is the dycrept password?
Click to expand...
Click to collapse
Click on cancel

Any news about ROMS??? ??
Any news about ROMS??? :fingers-crossed:

Great work sir
Gonna test it now

Dhruv_Agarwal said:
Click on cancel
Click to expand...
Click to collapse
I've tried everything, first of all wipe /format data for showing internal memory and otg but when I wanted to flash any file through recovery like xposed it had shown decrept password?

not working ...after flashing not able to go to twrp screen pls help
not working ...after flashing not able to go to twrp screen pls help

Plz help how to root Lenovo k 8

Help
Dhruv_Agarwal said:
Click on cancel
Click to expand...
Click to collapse
Hi i am a newbie to rooting. Could you please give me detailed steps. I understood till the point of flashing twrp. After that do I have to wipe data and flash magisk right then? (I have tried installing twrp 2 times but every time after installing and restarting it shows android recovery only.)
One more thing, will I be able to upgrade to oreo through OTA if I have the stock android recovery, since twrp is replaced by stock recovery every time ( although bootloader is unlocked)?