Hi,
I tried to upgrade my MMX A110 to Jelly bean using SP Flash tool but ended up in a bricked device(Most probably a hard brick :crying
Now my phone is not turning on or showing any sign of life...(Even the battery LED indicator is dead:crying
What i got is this: BROM ERROR : S_DA_INVALID_ADDRESS(3036)
I've attached some screenshots and logs i got during the process. Please help me if there is any way of giving life back to my phone...
You format your device using sp tool?
If you have formatted than okay, and if not than its good.
Use download option instead of firmware upgrade to flash your rom.
Sent from my Nexus using XDA Premium 4 mobile app
jaunty said:
You format your device using sp tool?
If you have formatted than okay, and if not than its good.
Use download option instead of firmware upgrade to flash your rom.
Sent from my Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the reply Jaunty..
What is the difference between Firmware-Upgrade & Download in SP Tools?
And can we install an ROM after formatting the device?
gmg1990 said:
Hi,
I tried to upgrade my MMX A110 to Jelly bean using SP Flash tool but ended up in a bricked device(Most probably a hard brick :crying
Now my phone is not turning on or showing any sign of life...(Even the battery LED indicator is dead:crying
What i got is this: BROM ERROR : S_DA_INVALID_ADDRESS(3036)
I've attached some screenshots and logs i got during the process. Please help me if there is any way of giving life back to my phone...
Click to expand...
Click to collapse
Have you flashed CWM recovery in your device before ? If you have then download any ROM for your device and flash it as per instructions given in the Rom's thread.. But if u havnt flashed CWM.. Then download Stock firmware of mmx A110.. And flash it through Sp flash tool.
Sent from my Qmobile Noir A10 using Tapatalk
gmg1990 said:
Thanks for the reply Jaunty..
What is the difference between Firmware-Upgrade & Download in SP Tools?
And can we install an ROM after formatting the device?
Click to expand...
Click to collapse
Yes you can install rom even after full format with sp tools, but format using sp tools is never recommended.
Now the difference is, when you full format with sp tools, everything like bin region, secure information in ic like imei and memory partition are erased, so to gain proper partition you have to press download instead firmware update.
If you don't do it you can't boot up your device.
I don't know what you did with your device. But seems something like what I suggested will work.
Sent from my Nexus using XDA Premium 4 mobile app
gmg1990 said:
Hi,
I tried to upgrade my MMX A110 to Jelly bean using SP Flash tool but ended up in a bricked device(Most probably a hard brick :crying
Now my phone is not turning on or showing any sign of life...(Even the battery LED indicator is dead:crying
What i got is this: BROM ERROR : S_DA_INVALID_ADDRESS(3036)
I've attached some screenshots and logs i got during the process. Please help me if there is any way of giving life back to my phone...
Click to expand...
Click to collapse
I also faced same problem. What i had done is Removed battery while a seconds and put it on again. In Sp flash tool folders Android and back up of nvram is deleted and start flashing and worked..
format my canvas 2 using sp flash tools
hello
i format my phone using sp flash tools now its not turning on...???
what to do?
RascalsInc said:
hello
i format my phone using sp flash tools now its not turning on...???
what to do?
Click to expand...
Click to collapse
Of course it wont turn on, you wiped the OS without replacing. just flash back the stock backup using SP flash tool.
plz help m i haev 2 pis canwas colour a120 mobile hard briked (chager indicater not showing)
Related
I accidentally formatted whole flash of my micromax A116 and now my mobile wont turn on..
i guess i bricked my mobile. can anyone please help me how to resolve this issue.:crying:
What do you mean with "formatted whole flash"?
Sent from my Xperia X10 using xda app-developers app
Download the stock Rom and special flash tools and you can easily flash the stock Rom.
Sent from my Micromax A116 using xda premium
Even I bricked my phone,tell me how to get my phone unbricked
Sent from my Micromax A116 using xda app-developers app
Okay now download your stock rom from here
download flash tools from here
drivers from here.. install drivers accordingly to your os (32 bit or 64)
extract all packages
Flash your stock rom
*open sp flash tool click on scatter loading.
*browse and select file i.e MT6589_Android_scatter_emmc under extracted rom folder.
*click on firmware upgrade
and remember while or before flashing pull your batteries out and insert again.
best of luck /////:good::good::good::good:
cannot recover
U need to install stock rom like others saying but to avoid risk of more "accidents" bcuz of it just go service center with phone warranty n u should by fine within mins n ofcourse hit thanks
abhishekchhabra said:
and remember while or before flashing pull your batteries out and insert again
Click to expand...
Click to collapse
NEVER PULL OUT THE BATTERY WHILE FLASHING ANYTHING! That is the equivalent of smacking your phone with a sledgehammer. Cutting the power off while flashing a kernel/firmware will brick your phone for good.
CCVader13 said:
NEVER PULL OUT THE BATTERY WHILE FLASHING ANYTHING! That is the equivalent of smacking your phone with a sledgehammer. Cutting the power off while flashing a kernel/firmware will brick your phone for good.
Click to expand...
Click to collapse
haha
CCVader13 said:
NEVER PULL OUT THE BATTERY WHILE FLASHING ANYTHING! That is the equivalent of smacking your phone with a sledgehammer. Cutting the power off while flashing a kernel/firmware will brick your phone for good.
Click to expand...
Click to collapse
yes, No battery pulling out "while flashing" sorry my bad haha
Hi,
I had my friend's Qmobile Noir A10(clone of canvas2). Infact it was already upgraded to 4.1.1 by company. When ever I try go to recovery an android appears with red sign and stucks there and i have to pull battery out. Root and restore by binary isnt working. Sp tolls doesnt works as well. Is there any way to root?
I want to root because I want its ROM.
hi brother . the screen you telling must be recovery , or bootloader mode, when that appear press the softkeys to get options in recovery.
by the way easy method is to flash CWM recovery via flash tool and then flash su update .zip.
shekhar1986 said:
hi brother . the screen you telling must be recovery , or bootloader mode, when that appear press the softkeys to get options in recovery.
by the way easy method is to flash CWM recovery via flash tool and then flash su update .zip.
Click to expand...
Click to collapse
Yes I know its stock recovery which isnt working
Can you tell me that exact steps?
I downloaded CWM img file and mtk6577 scatter file
I gave path to that img scatter file in sp tools
Click download
connected phone(switched off)
but didnt worked. giving me errors.
Please help fast. I dont have this phone for always :S
UnNaMeD__ said:
Please help fast. I dont have this phone for always :S
Click to expand...
Click to collapse
what kind of error you got via sptool.....
and its Jb so root and binary by restore method dint work....
khan_frd2002 said:
what kind of error you got via sptool.....
and its Jb so root and binary by restore method dint work....
Click to expand...
Click to collapse
Respected DEV is here to help you . tell the error you are getting and just to know . do you have correct drivers installed on your PC.
UnNaMeD__ said:
Please help fast. I dont have this phone for always :S
Click to expand...
Click to collapse
Don't hurry buddy . be calm or you may BRICK it. Do a research before using anything
Sent from my GT-I9500 using XDA Premium 4 mobile app
Please look on the screenshot attached
Are you sure the the drivers are installed for phone and also the mtk vcom drivers .
Sent from my GT-I9500 using XDA Premium 4 mobile app
shekhar1986 said:
Are you sure the the drivers are installed for phone and also the mtk vcom drivers .
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Might be :S Can you give me links? ty
No drviers were installed. I downloaded from micromax official website and installed. Again used sp tools and getting errors again.
Sorry buddy i have canvas 2 . but u can google for appropriate drivers .
And u also need to install phone drivers by enabling usb debugging
And MOBISTEL v com drivers are used for our canvas 2 u can try that also
Sent from my GT-I9500 using XDA Premium 4 mobile app
UnNaMeD__ said:
No drviers were installed. I downloaded from micromax official website and installed. Again used sp tools and getting errors again.
Click to expand...
Click to collapse
use another data Cable or try to change port....
khan_frd2002 said:
use another data Cable or try to change port....
Click to expand...
Click to collapse
Changed 3 ports
used other cable. not worked
UnNaMeD__ said:
Changed 3 ports
used other cable. not worked
Click to expand...
Click to collapse
then try another version of sptool.....
or may be scartter file is wrong......
khan_frd2002 said:
then try another version of sptool.....
or may be scartter file is wrong......
Click to expand...
Click to collapse
Can you give me the link for scatter file please?
UnNaMeD__ said:
Can you give me the link for scatter file please?
Click to expand...
Click to collapse
bro as its clone of mmx A110.... so mmx scatter file can work....
i got this prob might be due to the connecter inside the phone which links the usb cable mine i got it rectiified from service center of mmx try to take it to the service center and check the connector
khan_frd2002 said:
bro as its clone of mmx A110.... so mmx scatter file can work....
Click to expand...
Click to collapse
Sorry bro but forgot to tell you that phone is stolen (snatched)... idiot thieves
hi brilliant minds,
I own a gionee elife e3 and i tried to put in the xperia HD v1 rom in it. I accidently missed updating the firmware to the chinese one and applied the zip file for the rom . Now my phone is stuck in the gionee logo screen and refuses to go ahead.
it is getting charged. and i can get into CMW to mount the sd card.
please help as soon as possible people.
thank you in advance.
Dont worry just flash another rom or stock rom of your device if available, or restore a backup if none of this worked then try the unbricking guide link in my sign but remember this is for other device you can take a tutorial
Sent from my A2 using xda app-developers app
NC4777 said:
Dont worry just flash another rom or stock rom of your device if available, or restore a backup if none of this worked then try the unbricking guide link in my sign but remember this is for other device you can take a tutorial
Sent from my A2 using xda app-developers app
Click to expand...
Click to collapse
i tried flashing the device with SP flash tool but it gets stuck after a point. could you suggest me a link to how i should go about flashing the device ?
maybe im missing something
NO REPLY
Anandsr94 said:
i tried flashing the device with SP flash tool but it gets stuck after a point. could you suggest me a link to how i should go about flashing the device ?
maybe im missing something
Click to expand...
Click to collapse
sir.... i was hoping yud help... looks like yur just trying to promote your tutorials
NC4777 said:
Dont worry just flash another rom or stock rom of your device if available, or restore a backup if none of this worked then try the unbricking guide link in my sign but remember this is for other device you can take a tutorial
Sent from my A2 using xda app-developers app
Click to expand...
Click to collapse
Contact any developer having same device.
Sent from Mobile
just flash the boot.img via sp_flash tool and u can recover from the boot loop.
Anandsr94 said:
hi brilliant minds,
I own a gionee elife e3 and i tried to put in the xperia HD v1 rom in it. I accidently missed updating the firmware to the chinese one and applied the zip file for the rom . Now my phone is stuck in the gionee logo screen and refuses to go ahead.
it is getting charged. and i can get into CMW to mount the sd card.
please help as soon as possible people.
thank you in advance.
Click to expand...
Click to collapse
just flash a custom ROm in CWM then revert to stock when your phone is up
Plz someone create a twrp or philz or ctr or cwm custom recovery for my micromax Q371. I have tried all auto port tools and mtk droid tools to port a custom recovery for my device. But it comes white screen on twrp and black on other recoveries  . Plz someone help me.
Android mobile details-
Micromax canvas pep Q371
1gb ram
Resolution - 480×854
4.4.2 kitkat
Mt6582
Plz help 
Here is my stock recovery
https://drive.google.com/file/d/0B7W2r8s7EFZINFN5b25PWTNPUFk/view?usp=docslist_api
Sent from my Micromax Q371 using Tapatalk
Abinash ghadai said:
Plz someone create a twrp or philz or ctr or cwm custom recovery for my micromax Q371. I have tried all auto port tools and mtk droid tools to port a custom recovery for my device. But it comes white screen on twrp and black on other recoveries  . Plz someone help me.
Android mobile details-
Micromax canvas pep Q371
1gb ram
Resolution - 480×854
4.4.2 kitkat
Mt6582
Plz help 
Here is my stock recovery
https://drive.google.com/file/d/0B7W2r8s7EFZINFN5b25PWTNPUFk/view?usp=docslist_api
Sent from my Micromax Q371 using Tapatalk
Click to expand...
Click to collapse
Carliv Touch v3.3
https://mega.nz/#!kZEiRaQb!V7n0h_ipyPjw-Q6sf5zYFqz35naqOCB32VGO5tefnsw
Thanks for trying but not worked... Same problem existing ... Blank screen comes then reboots automatically ... I flashed it via mobile uncle tools and then by rashr then by flashify.. But always same problem. Help plz..
Sent from my Micromax Q371 using Tapatalk
Abinash ghadai said:
Thanks for trying but not worked... Same problem existing ... Blank screen comes then reboots automatically ... I flashed it via mobile uncle tools and then by rashr then by flashify.. But always same problem. Help plz..
Sent from my Micromax Q371 using Tapatalk
Click to expand...
Click to collapse
Try Rashr flash toolhttps://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
I have tried rashr,flashify,mobile uncle tools,sp flash tool to flash this... Always same problem existing
Sent from my Micromax Q371 using Tapatalk
Dude I'm having prblm here.Mynis Q371 but it's dead shows only media tek preloader
then I downloads the flash files and everything is good but still device wont boot up.After flashing When I press power button it agin show mediatrek preloader driver but every flash was download succesfull to device
these r the files i tried https://drive.google.com/uc?id=0B9-UmTxcsoRjUWlNMlNCV3hDeFU & https://userscloud.com/po9422amdob8
And also used many version of sp flash tools .. did u have any working flash file wihich is other than this I'm ready for advices
thanks
Tyson12 said:
Dude I'm having prblm here.Mynis Q371 but it's dead shows only media tek preloader
then I downloads the flash files and everything is good but still device wont boot up.After flashing When I press power button it agin show mediatrek preloader driver but every flash was download succesfull to device
these r the files i tried https://drive.google.com/uc?id=0B9-UmTxcsoRjUWlNMlNCV3hDeFU & https://userscloud.com/po9422amdob8
And also used many version of sp flash tools .. did u have any working flash file wihich is other than this I'm ready for advices
thanks
Click to expand...
Click to collapse
Have u installed vcom ... First install vcom drivers... Then load scatter file in sp flash tool .. Then click on download button... Then connect ur device using usb data cable
Sent from my Micromax Q371 using Tapatalk
Abinash ghadai said:
Have u installed vcom ... First install vcom drivers... Then load scatter file in sp flash tool .. Then click on download button... Then connect ur device using usb data cable
Sent from my Micromax Q371 using Tapatalk
Click to expand...
Click to collapse
Thanks 4 the reply ..I did everything The phone was good at earlier time. I wanna flash the firmware again ..So did it via sp flash tool And stuck here .. As far as i search's the device emmc chip prblm kindly refer these links..it might help u understand what my prblm is..... http://forum.gsmhosting.com/vbb/f811/micromax-q371-dead-after-flashing-pls-need-urgent-help-2008059/
http://forum.gsmhosting.com/vbb/f296/micromax-q371-dead-after-flash-need-help-badly-2060010/
And by the way i flash many models using sp flash tools... and some other tools also..
Tyson12 said:
Thanks 4 the reply ..I did everything The phone was good at earlier time. I wanna flash the firmware again ..So did it via sp flash tool And stuck here .. As far as i search's the device emmc chip prblm kindly refer these links..it might help u understand what my prblm is..... http://forum.gsmhosting.com/vbb/f811/micromax-q371-dead-after-flashing-pls-need-urgent-help-2008059/
http://forum.gsmhosting.com/vbb/f296/micromax-q371-dead-after-flash-need-help-badly-2060010/
And by the way i flash many models using sp flash tools... and some other tools also..
Click to expand...
Click to collapse
Flash the v11 and select format+download in sp flash tool
... Surely u will get success.. I have faced this type of problem in many handsets by flashing older versions... Then got out of it by flashing newer versions....
Sent from my Micromax Q371 using Tapatalk
Have u ported any custom recovery or rom for it??
Sent from my Micromax Q371 using Tapatalk
Abinash ghadai said:
Have u ported any custom recovery or rom for it??
Sent from my Micromax Q371 using Tapatalk
Click to expand...
Click to collapse
No i didn't have any custom roms/ recovery's flashed previously on that device
and by the way i tried these files http://mtk-p.micromaxinfo.com/produ...-01-2015/MMX_Q371_SW_V09_HW_V1.1_14012015.rar which is named MMX_Q371_SW_V09_HW_V1.1_14012015 this is v9 i guess
and also MMX_Q371_SW_V11_HW_V1.1_16052015 [this is v11 right!!] this and Micromax_Q371_V1_20.01.15_(by_xdafirmware.com) [this is also v9 i guess]
View attachment Documents.zip
so these r the file i tried still no hope... i guess it's eemc chip problem will soldering it may work
and also in older version of sp it shows ppmc get failed error 1024 but in newer versions it's flashing with out any error but not booting device ..any other ideas
could me provide any other links for v11 on behalf of this links https://drive.google.com/uc?id=0B9-UmTxcsoRjUWlNMlNCV3hDeFU & https://userscloud.com/po9422amdob8 [coz i already tried those ]
last thanks in advance and for ur time
Successfully i ported cwm and philz recovery for q371 but still unable to port twrp for it... Can anyone help me about this... I ported all from android one.. But unable to port twrp.. Help!!
Sent from my A37 using Tapatalk
Please help me! My Infinix Note 5 is completely briked, dead. Please help me
How
What did u do to brick it
Mine to I tried to format using spft and it bricked,I can't flash it using SPFT because it keeps showing errors,any help?
Sinlesss said:
Mine to I tried to format using spft and it bricked,I can't flash it using SPFT because it keeps showing errors,any help?
Click to expand...
Click to collapse
U use custom download agent in sp flash tool? U should use one to download( flash) the firmware