Related
ok, so i've read what i think i need to root and install a custom ROM (i think i want to try eagles blood 2.8 first http://forum.xda-developers.com/showthread.php?t=1124522)
just got my G2x on Monday and it has GB 2.3.3 but i have not checked if it has an update and not sure i want to update it first, but that is my question.
should i do an update first before i do anything else or does it even matter? i mean i will root, then do a backup, then install the ROM, right? so it shouldnt matter if the phone is the latest and greatest from LG or T-Mobile as i will be overwriting it anyway...at least that is how i think it works
also i have seen where people are saying to wipe everything (or at least a few folders), how is that done? just delete what is in the folders or is there a tool to wipe said data?
No OTA updates are available, but is unnecessary anyway. Also, no need to root if you want to flash these roms as they already have root access. Flash clockworkmod (search for the thread on that) then flash the rom you want. All the instructions are there.
Sent from my LG-P999 using xda premium
thanks, i didnt even want to try the update, but since you said there isnt one, i tried and sure enough, i have the latest already
OTA=over the air? i've seen that one a few times, some new acronyms here i need to learn
this is what i was going to do first
http://forum.xda-developers.com/showthread.php?t=1255214
1st Root your phone. Then Flash cwm thru nv flash. This is the only way if you want to manually boot into recovery
Sent from my LG-P999 using XDA App
chrisram88 said:
1st Root your phone. Then Flash cwm thru nv flash. This is the only way if you want to manually boot into recovery
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
No need to root before nvflashing cwm.
Yes, OTA is "over the air". And just so you know, make sure you follow those nvflash steps EXACTLY as written. What you are choosing to flash, however, is the completely stock (although rooted) version of android 2.3.3 that you already have on your phone. This is fine, but after you get cwm you can flash any custom rom you find within the development section as well. I recommend at least choosing cm7 because the stock rom sucks.
Sent from my LG-P999 using xda premium
e4e5nf3nc6 said:
No need to root before nvflashing cwm.
Yes, OTA is "over the air". And just so you know, make sure you follow those nvflash steps EXACTLY as written. What you are choosing to flash, however, is the completely stock (although rooted) version of android 2.3.3 that you already have on your phone. This is fine, but after you get cwm you can flash any custom rom you find within the development section as well. I recommend at least choosing cm7 because the stock rom sucks.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
gotcha, so that thread is the one i need to follow?
http://forum.xda-developers.com/showthread.php?t=1056847
This one. It's actually linked as the first step in your thread. This is the important one. Read it over a couple times first, and maybe watch some videos too.
Everything after that step in your thread is basically how to flash a custom rom. They are just choosing a rooted version of stock as their example.
Sent from my LG-P999 using xda premium
root first if you want to backup any of the apps on the phone.
i rooted , clockworked , backed up the phone then copied the int and ext sd roms to my pc. installed titanium and backed up all the apps in the stock rom i thought i might want to keep. ( mostly the nova demo and need for speed) . copy your rom contents over so if you mistakenly format your sd card you can still return the phone to stock. ( don't ask i did it ) tryed cm7 stable. liked it but had sleep of death issues. returned the phone to stock . messed with the stock apps and root explorer backed everything up again. and now im ruing weapon r and love it. no stutter and smooth as a hot knife going thru butter and no sleep of death! and USB works every time. even love the loader he used.
ok followed the steps here
http://forum.xda-developers.com/showthread.php?t=1060715
then here (which is actually referenced first in the above thread)
http://forum.xda-developers.com/showthread.php?t=1056847
and then here (which is done after you do the stuff in the above thread)
http://forum.xda-developers.com/showthread.php?t=1255214
i put eagles blood 2.8 on it and it seems to be doing ok.
couple of things, dont know if this is a theme issue, but it no longer says 4G, it has a letter H instead
also i moved the notification bar to the bottom but cant remember where to change that back to the top
that looks good. don't for get to copy off the internal and external sd chips and keep that data safe. when you made your backup in clockwork it stored it on the internal chip. titanium by default i be leave uses the external. if any thing goes wrong, as long as you have access to those backups and can boot to clockwork you can get your phone working.
dodgefan67 said:
ok followed the steps here
http://forum.xda-developers.com/showthread.php?t=1060715
then here (which is actually referenced first in the above thread)
http://forum.xda-developers.com/showthread.php?t=1056847
and then here (which is done after you do the stuff in the above thread)
http://forum.xda-developers.com/showthread.php?t=1255214
i put eagles blood 2.8 on it and it seems to be doing ok.
couple of things, dont know if this is a theme issue, but it no longer says 4G, it has a letter H instead
also i moved the notification bar to the bottom but cant remember where to change that back to the top
Click to expand...
Click to collapse
The h is the same as 4g. There are mods to change those icons that can be found on xda. As far as the status bar, I think that setting is located somewhere in the tablet tweaks menu.
Sent from my LG-P999 using xda premium
e4e5nf3nc6 said:
The h is the same as 4g. There are mods to change those icons that can be found on xda. As far as the status bar, I think that setting is located somewhere in the tablet tweaks menu.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
yes in the tablet tweaks, thanks
but now i have a bigger problem. i dont seem to have any network access now, 4g, 3g, edge, nothing. i can make calls and send texts, but no data. should i start a new thread?
dodgefan67 said:
yes in the tablet tweaks, thanks
but now i have a bigger problem. i dont seem to have any network access now, 4g, 3g, edge, nothing. i can make calls and send texts, but no data. should i start a new thread?
Click to expand...
Click to collapse
Occasionally on cm7 based roms data will drop out and u need to reboot to bring it back...if u haven't already, try a reboot.
Sent from my LG-P999 using xda premium
JuEv0splash said:
Occasionally on cm7 based roms data will drop out and u need to reboot to bring it back...if u haven't already, try a reboot.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
DOH! yup that was it, reboot brought it back. thanks!
so like i posted before it shows an H instead of 4G so i'm assuming that stands for HSPA?
Yeah that's it. How are you liking the rom? Bear in mind that now you have root access you can do all sorts of customizations. You can flash kernels that allow for overclocking or underclocking, use titanium backup (recommended) to preserve all apps and app data, modify boot animations and status bar icons, basically anything you want. Enjoy!
Sent from my LG-P999 using xda premium
im liking it so far, and yeah i understand about root access, i've done linux admin and use debian at home, so im really liking this, its kind of like running debian now instead of ubuntu or mint, getting rid of all the junk that gets piled on top of the pure OS!
im sure i will try other ROMs as well and maybe other kernels. do those install the same way? using ROM Manager?
dodgefan67 said:
im liking it so far, and yeah i understand about root access, i've done linux admin and use debian at home, so im really liking this, its kind of like running debian now instead of ubuntu or mint, getting rid of all the junk that gets piled on top of the pure OS!
im sure i will try other ROMs as well and maybe other kernels. do those install the same way? using ROM Manager?
Click to expand...
Click to collapse
Yea you flash it in recovery.
Sent from my LG-P999 using XDA App
now that yore rooted and have clockwork you can flash things safely
just remember to backup, and to wipe the davik cache its in advanced menu.
try weapon r and then add the update new clip to it , its smooth and no bugs so far fro me.
Okay, so my dad had bought a fit a few months back and he's sick of how slow it is and how unstable the stock is...
I'm not a newbie when it comes to this but I've only messed with my Motorola defy and after some looking around here it seems like things are a bit different for the fit (apart from rooting which is very simple)
So I basically want the most stable rom (oc'd as well hopefully) and a small guide to get there from an untouched stock rom
Any help? Any help appreciated
Sent from my MB525 using Tapatalk 2
try to flash crees's revolution 3.1
then flash adrenaline script.
but you wrote on the wrong section.
Sent from my GT-S5670 using xda premium
Wrong Section Dude !!
this is the development section please dont post here with anything else!!
vigan_ks said:
try to flash crees's revolution 3.1
then flash adrenaline script.
but you wrote on the wrong section.
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
oh crap!! I was scanning through this forum on my phone, and I forgot about it before creating this thread.. my bad :\
alright then, I'll flash that, but I need some instructions from start to finish
I'll root it first using superoneclick..
then what?
On my Defy I had to install CWM and 2ndInit because of the locked bootloader, but I'm not sure how it happens on this phone.
(on a side note, I'm quite surprised by the level of activity on this forum
Didn't expect the Fit to get any attention over here)
edit: I'm referring to this thread for installing CWM, but the instruction make no sense to me
http://forum.xda-developers.com/showthread.php?t=1339640
--------------------------
Instruction:
-Download :beni_cwm-5_ext4_v2.tar
-Open S5570_Odin_Multi_Downloader_v4.38.exe
-Place BENI_v1.0.ops on OPS tab
-Check the One Package Option
-Place beni_cwm-5_ext4_v2.tar on One Package tab
-Connect the device on Download Mode
-Press Start and wait for flashing process is finished
---------------------------
refer to http://forum.xda-developers.com/show....php?t=1339640 and http://forum.xda-developers.com/showthread.php?p=22753468 if u still cant understand from tj's thread then search youtube for cwm and check my thread if u want those roms..
First of all upgrade to Gingerbread via Kies/ODIN.
Then, install CWM via ODIN.
Download any ROM and flash via CWM.
hari047 said:
refer to http://forum.xda-developers.com/show....php?t=1339640 and http://forum.xda-developers.com/showthread.php?p=22753468 if u still cant understand from tj's thread then search youtube for cwm and check my thread if u want those roms..
Click to expand...
Click to collapse
Didn't understand the french thread but I did have a look at yours. Great work with all the videos... sadly the only video missing is the one for CWM
and I just can't understand tjstyle's guide
is there any other guide floating around?
Aspire said:
First of all upgrade to Gingerbread via Kies/ODIN.
Then, install CWM via ODIN.
Download any ROM and flash via CWM.
Click to expand...
Click to collapse
Is this really necessary? I don't wanna download an entire GB rom just for CWM
Isn't there an app or something for this? I don't remember how I did it for my phone but it was quite straightforward
EDIT: I just looked up how to install CWM on my phone and it's a simple app from the play store. Isn't there anything similar for this phone?
You've got Froyo atm? If yes, then you do need to install GB first
---------- Post added at 08:40 PM ---------- Previous post was at 08:39 PM ----------
don't use rom manager... it'll brick the phone
Okay then.. I'll do that first thing when my dad gets back.
also, will this work for custom recovery? http://forum.xda-developers.com/showthread.php?t=1623761
Is it reliable? The thread's only a page long, so i'm not sure
So finally, just to make sure I've got all the steps in order (before a moderator deletes this thread!!)
1. Install GB through Kies
2. Root the phone using SuperOneClick
3. Use ODIN for CWM (what exactly is ODIN? is it an app or something?)
4. Download ROM and GAPPS and flash it through CWM
That's it right? No messing with kernels or SBFs??
underage17 said:
Okay then.. I'll do that first thing when my dad gets back.
also, will this work for custom recovery? http://forum.xda-developers.com/showthread.php?t=1623761
Is it reliable? The thread's only a page long, so i'm not sure
So finally, just to make sure I've got all the steps in order (before a moderator deletes this thread!!)
1. Install GB through Kies
2. Root the phone using SuperOneClick
3. Use ODIN for CWM (what exactly is ODIN? is it an app or something?)
4. Download ROM and GAPPS and flash it through CWM
That's it right? No messing with kernels or SBFs??
Click to expand...
Click to collapse
Well fit got a very simple system ...
no bootloader problem nothing locked ...neither the recovery is integrated with kernel !!
so to get a custom rom...
jus upgrade to a Gb rom.(Download a firmware from sammobile.com and flash via ODIN)
Using Odin(a Windows Tool) Flash the Cwm .
then using CWM flash as many custom roms as you want !!
well, that's good to know.. but I have a problem
I do remember seeing Kies when my dad got my phone, but right now, it's not showing up on the app drawer. And the Play Store isn't showing up either
Almost no apps were installed since we got the phone, and it's only been used for calling and the occassional texting
Any idea what's gone wrong? And how do I proceed with the flashing now?
Samsung Kies is a program for the PC.
http://www.samsungapps.com/about/onPc.as
Aspire said:
Samsung Kies is a program for the PC.
http://www.samsungapps.com/about/onPc.as
Click to expand...
Click to collapse
Oh right.. my bad
Not that it matters if I do manage to fix it up with a custom rom by the end of the night but do you know why the play store isn't showing up?
maybe it's still called the android market?
Hmm I had made a guide, just for this same exact thing...
Its stickied in the general section...
Here it is
Typed on a small touchscreen
haha, but nope.. can't see it as either of them.
it's okay though, since my dad's probably never heard of it yet anyway.
I'll probably keep having problems through the setup tonight :\
Hope you guys don't sleep too soon
Aspire said:
Samsung Kies is a program for the PC.
http://www.samsungapps.com/about/onPc.as
Click to expand...
Click to collapse
a.cid said:
Hmm I had made a guide, just for this same exact thing...
Its stickied in the general section...
Here it is
Typed on a small touchscreen
Click to expand...
Click to collapse
Oh great!! Exactly what I was looking for
I guess I'll just follow the steps on this instead of installing GB first.. no problem, right?
EDIT: Seems like according to the guide, you need GB to install CWM.. oh well then
I guess I'll just follow the steps on this instead of installing GB first.. no problem, right?
Click to expand...
Click to collapse
If you do read the instructions carefully, you'll find that gingerbread is a pre-requisite.
underage17 said:
Oh great!! Exactly what I was looking for
I guess I'll just follow the steps on this instead of installing GB first.. no problem, right?
Click to expand...
Click to collapse
Yup, that's why its there in the first place...
Though read through the whole thing...even if you know stuff...things might be a little different...
Typed on a small touchscreen
i have rooted and unlocked bootloader on my htc one x from at&t. i installed twrp. i downloaded and copied this rom to my phone and i am now trying to flash it. http://onexroot.com/one-xl-roms/cm10-jelly-bean-rom-for-att-one-xone-xl/
what was weird is that when its booting it says cyanogenmod 9 not ten.
it has been at least 10 minuets now and i need to know how to fix this. thankyou.
Well...
First off. If you know about XDA (Which is clear, since you're posting your problem here in the forum), why did you download a ROM from another site? One that doesn't look as 'legitimate' as XDA?
Second. CM10 doesn't have a boot animation yet (They may now, but the ROM you downloaded may not have been updated.) There was a CM10 ROM here on XDA that was using the CM9 animation due to lack of CM10 bootanimation.
It sounds to me like something went wrong when flashing. You need to reboot into twrp and reflash the ROM. I highly recommend downloading a ROM from XDA and going that route.
HTC_Phone said:
First off. If you know about XDA (Which is clear, since you're posting your problem here in the forum), why did you download a ROM from another site? One that doesn't look as 'legitimate' as XDA?
Click to expand...
Click to collapse
Completely agree here. That website looks pretty dodgy. Loaded with ads, it doesn't give much information on what you are even downloading/installing, and it doesn't seem to be posted by the actual developer, or give any credit to them (aside from the brief "Credits - XDA" link at the bottom of the article. Plus the download location is not the same as the original Developer's link, which would worry me (to say the least). I'd avoid downloading from this site, unless you have a legit reason to believe its reputable. But it just looks like one of those unscrupulous sites that posts contents from other sources, and rakes in ad revenue from clueless vendors.
Also, the version of the ROM linked is 3 weeks older than what the dev has posted here on XDA, with the newer version having fixed lots of stuff.
Stick to the Development subforums here. Much safer.
If you are looking for a safe ROM to install, I highly suggest you look through this XDA. There is a nearly flawless CM10 ROM here. I user it for a little while and loved it, but missed Sense too much and switched to CleanROM
Sent from my HTC One X using xda app-developers app
ewokiscool said:
i have rooted and unlocked bootloader on my htc one x from at&t. i installed twrp. i downloaded and copied this rom to my phone and i am now trying to flash it. http://onexroot.com/one-xl-roms/cm10-jelly-bean-rom-for-att-one-xone-xl/
what was weird is that when its booting it says cyanogenmod 9 not ten.
it has been at least 10 minuets now and i need to know how to fix this. thankyou.
Click to expand...
Click to collapse
I would strongly recommend doing a full wipe and factory reset before anything else. Who knows what you actually installed?
There are a LOT of sites out there offering what purports to be legitimate android software but is actually malware. Android's openness is a big plus but is also a risk. You have to be careful where you get apps and roms from. Just googling for them is going to get you in trouble very quickly.
Here's just one good example:
http://blog.trendmicro.com/malware-masquerades-as-flash-player-for-android/
HTC_Phone said:
Well...
First off. If you know about XDA (Which is clear, since you're posting your problem here in the forum), why did you download a ROM from another site? One that doesn't look as 'legitimate' as XDA?
Click to expand...
Click to collapse
Lol I said the exact same thing to this guy in his other thread when he thought he bricked his phone. Some people never learn.
Steps to fix your problem
1) are u coming from a sense 4.0.4 ROM/stock? If so u have an incompatible hboot. This will cause boot loop like what u are seeing if this is the case you have to change to the older boot.img (if u updated to the newest at&t ota ur on 4.0.4 if ur coming from a ROM like clean ROM 4.5 ur on 4.0.4) this is most likely your problem to fix this you need to use fast boot to change the boot.IMG I don't know the exact procedure off the top of my head but ull find it with a quick search
2) if not and ur coming from sense 4.0.3 then you should reboot to twrp and wipe cache/dalvic cache this should fix it
3) if not wipe everything (except SD card) this means cache, dalvik cache, factory reset, and system then reflash.
Important definitely grab the newest build from here like what was mentioned earlier.
Sent from my One X using xda app-developers app
ewokiscool said:
i have rooted and unlocked bootloader on my htc one x from at&t. i installed twrp. i downloaded and copied this rom to my phone and i am now trying to flash it. http://onexroot.com/one-xl-roms/cm10-jelly-bean-rom-for-att-one-xone-xl/
what was weird is that when its booting it says cyanogenmod 9 not ten.
it has been at least 10 minuets now and i need to know how to fix this. thankyou.
Click to expand...
Click to collapse
CM10 currently uses the CM9 boot animation. If you have AT&T 2.20 software, then you need to flash the boot.img using fastboot or CM10 (and all ROMs) will just stay in the boot animation for ever. Why didn't you download CM10 from XDA?
Hi,
after being a lurker I finally made an account to ask for help with a problem I can't solve.
I flashed my P500 with the latest 7th build of the CM10 by Rashed97 from stock 2.2.2 with V10a badeband.
All wipes done etc. flash went well.
Only problem, the phone didn't detect any SIM cards, detected no GSM.
I went on looking at all the ways to flash baseband and fix it. In the end I failed, tried LGMDP got errors, tried the fix provided by some of the users but the baseband stays "unknown" (not sure if was like that b4 fix, so I recovered to 2.2.2 and gonna do it again).
I'm asking for some advice, just how am I supposed to handle it this time so in the end I get a functioning phone.
Should i update baseband first, then flash ROM?
Cheers, looking forward to your replies.
First link in my signature below. Try flashing that.
If didnt work, unzip it and place it in /system/lib and set permissions right.
Same as other lib's permissions.
rr0yy said:
First link in my signature below. Try flashing that.
If didnt work, unzip it and place it in /system/lib and set permissions right.
Same as other lib's permissions.
Click to expand...
Click to collapse
I used the fix already, didn't work. Tho i didn't figure out how to get it into /system/lib (where do I find that directory?). You mentioned in an earlier post, that one has to use root explorer, as in an APP?
Or maybe I'm supposed to flash the fix while I'm still on stock 2.2.2?
EDIT: Ugh, I'm tired and my posts are quite bad, but I got some news.
Baseband turns to unknown right after flashing ROM (flashed gapps also). So I'm gonna try that method of yours with putting the fix into /system/lib , I'm off to figure out how it's done....
EDIT2: Copied and overwrote the files from system/lib but where do the META - INF folder go?
Meta-Info folders are for recoveries not for us
No need to extract them.
Sent from my LG-P500 using xda premium
Sadly, even extracting the fix and putting the files manually into system/lib doesn't fix my problem ( I even checked the permissions).
Maybe I should just try updating the baseband first on 2.2.2 and then flash the CM10 ROM?
akiratoriyama said:
Meta-Info folders are for recoveries not for us
No need to extract them.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Well. Try reflashing. Or updating ur baseband.
Sent from my LG-P500 using xda premium
allenwalker1998 said:
Well. Try reflashing. Or updating ur baseband.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
So I updated my ROM and baseband with G Mobile Support Tool.
Right now I got stock 2.3.3 with V20c on my P500. I guess I'll make a recovery of this and start flashing the CM10 again.
EDIT: Now this is bat**** crazy. After getting stock 2.3.3 had to fight to root it (finally managed with Onec Click Root). Now when I got my superuser I can't even go into recovery. Holding home + vol up + power makes a factory reset instead (superuser stays, other app like rom manager, quickboot and settings get deleted). So wth?
I think I'll try reflashing recovery with rom manager (after i once again dl it).
Victory!
:laugh:
Finally I managed to get it to work.
After updating to stock 2.3.3 I already had the right baseband, so then I just had to reflash recovery (which fixed the issue of going into recovery mode) and finally reflash the whole CM10 ROM.
Got greeted by phone asking for PIN, GSM works with full bars and now I can sit back and enjoy the smoothness of JB Android.
I'd like to thank all the people who answered my posts, gave me advice and tried to help.
I really, really needed this :victory: because changing to P500 with 4.1.2 is a really great upgrade from my GT540.
That's both for soft and hardware (finally multi-touch, Donkey Kong Adventure on SNESOID, here I come).
Rock on guys! :highfive:
LG LU6200
rr0yy said:
First link in my signature below. Try flashing that.
If didnt work, unzip it and place it in /system/lib and set permissions right.
Same as other lib's permissions.
Click to expand...
Click to collapse
dude that was awsome! but what about LG LU6200? i installed custom rom liquid jelly bean cm10 port, i can call and recieve sms but i cannot send sms, no signal..
ramica7 said:
dude that was awsome! but what about LG LU6200? i installed custom rom liquid jelly bean cm10 port, i can call and recieve sms but i cannot send sms, no signal..
Click to expand...
Click to collapse
The Lg LU6200 is a much different phone from ours and probably has a much different solution to your problem, I would recommend you ask on the forum for that phone. The nitro HD is a very similar phone, and there is a development subforum for your phone in the nitro hd's forum so there is probably a solution somewhere on there: http://forum.xda-developers.com/forumdisplay.php?f=1445
ramica7 said:
dude that was awsome! but what about LG LU6200? i installed custom rom liquid jelly bean cm10 port, i can call and recieve sms but i cannot send sms, no signal..
Click to expand...
Click to collapse
You can search the forum mentioned in the previous post or this thread as I think it may be more along the lines of the answer you're looking for. Since I don't have one of these devices, all I can do is search and hopefully point you in the right direction.
shinobisoft said:
You can search the forum mentioned in the previous post or this thread as I think it may be more along the lines of the answer you're looking for. Since I don't have one of these devices, all I can do is search and hopefully point you in the right direction.
Click to expand...
Click to collapse
thank you, but i have no luck, few user of LG LU6200... bad luck..
Hi! I'm not new to android modding, but with this phone (the 3D) I founded some difficult. There is some confusion in my mind about the baseband,ROM etc... Now I run CM7.2 with baseband v21d, but before I try to install CM10,but I encounter some problem:
1) My phone, like happened to others users, works properly without SIM, but when I put it inside the phone, and then PowerOn the device, it stuck after about 30 sec and then reboot.
2) I bricked my P920 trying to come back to GB stock (there are too many guides about it,and maybe I forgot something...). However, now my P920 is like new because I havd warranty and my store repaired it.
The question now is this:
I install CM10 on baseband v21e and v21d...but the result was the same: reboot with SIM.
What can I do to have CM10 on my wonderful P920? thx for the attention :good:
MrBolz said:
Hi! I'm not new to android modding, but with this phone (the 3D) I founded some difficult. There is some confusion in my mind about the baseband,ROM etc... Now I run CM7.2 with baseband v21d, but before I try to install CM10,but I encounter some problem:
1) My phone, like happened to others users, works properly without SIM, but when I put it inside the phone, and then PowerOn the device, it stuck after about 30 sec and then reboot.
2) I bricked my P920 trying to come back to GB stock (there are too many guides about it,and maybe I forgot something...). However, now my P920 is like new because I havd warranty and my store repaired it.
The question now is this:
I install CM10 on baseband v21e and v21d...but the result was the same: reboot with SIM.
What can I do to have CM10 on my wonderful P920? thx for the attention :good:
Click to expand...
Click to collapse
Download the latest nightly and gapps. (There are links everywhere.)
Flash v28 baseband (There are links everywhere.)
Flash your CM10 rom.
Flash Gapps.
You're good to go.
No SIM problems here.
No problem with V21D and V21E here. *knocks on wood* However, I recommend flashing wpark's v1.25a bootloader (or BIOS - same thing) as it forces any modem firmware to stand up - V21D as a minimum - just go with V28A if you want the fast way out of SIM issues on original bootloader (or wpark's).
Sent from my LG-P920 using XDA
so...if I install wkpark's bootloader on v21d,and then CM10+gapps it should run with SIM? tomorrow i Try (in my country,Italy,it's half past one :silly: ) thx for the reply
You can try V28 first and see.
Sent from my LG-P920 using XDA
Dr. Mario said:
You can try V28 first and see.
Sent from my LG-P920 using XDA
Click to expand...
Click to collapse
Ok...so the plan is to flash the v28.kdz and then install cm10 right?
now I'm on CM7...if I flash v28.kdz it's right? sorry for my ask...but bricking this phone make me careful!
You can install cm10,gapps and wkpark's bootloader now. That's the easiest way now. Besides that thing is actually nearly unbrickable there is a good chance you could have repaired it by yourself. But let's not talk about the past. Try, it should work.
Gesendet von meinem LG-P920 mit Tapatalk 2
ok guys...I don't know how to say but... IT WORKED
I wiped cm7.2,and I install CM10+gapps. then I go into fastboot mode, I flashed manually u-boot+x-loader by wpark and then...it doesn't freeze! I really love you guys...really...now I have a badass phone with cm10...
THX to all!