I can't remove the screen plastic - Nexus 5 Q&A, Help & Troubleshooting

Hey I just got my Nexus 5 and I can't remove the plastic film that comes attached to the screen! I keep clawing at it with my finger nails but it wont come off its super glued or something and I'm afraid to use a knife it might scratch the screen.
Is there some kind of trick or special way to get this damn thing off?

Try masking tape
Sent from my Nexus 5 using xda app-developers app

Isn't there a little tab above the signal icons? Pull that first and it comes off.
Sent from my Nexus 5

Kaldius said:
Hey I just got my Nexus 5 and I can't remove the plastic film that comes attached to the screen! I keep clawing at it with my finger nails but it wont come off its super glued or something and I'm afraid to use a knife it might scratch the screen.
Is there some kind of trick or special way to get this damn thing off?
Click to expand...
Click to collapse
DO NOT USE A KNIFE
The screen protector 'should' just peel off but as you seem to have one that isn't, I would recommend just being patient and hopefully it will loosen with some use?
IF you can't wait, use something like a wooden toothpick/cocktail stick (with care) or something not metal (the gorilla glass should withstand it but why risk it). Good luck

barry_ said:
DO NOT USE A KNIFE
Click to expand...
Click to collapse
Actually you're not gonna scratch the screen with a knife.
But you should have a part to grab on the top.
Sent from my Nexus 5

The masking tape idea is really goof if the tab is gone
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit

Does it say "nexus" across the screen?

I am actually a little upset that nowaday these electronic manufacturers "have figured" it out as in that they feel like their oem plastic screen protectors shouldn't be a freebie screen protector anymore so now they tack on the logo so you almost kinda force to have to remove it or try real hard to live with the logo. This goes for my samsung s4 which has an even bigger logo on it blocking the view.
I have a nexus 10 and a samsung 500t and both of them came with a nice transparent oem protector. I just scissor clip the lift tab at the corner so the protector doesn't get peeled off. And there, save myself the trouble and cost of having to buy a screen protector..... Sucks.....

wildpig1234 said:
I am actually a little upset that nowaday these electronic manufacturers "have figured" it out as in that they feel like their oem plastic screen protectors shouldn't be a freebie screen protector anymore so now they tack on the logo so you almost kinda force to have to remove it or try real hard to live with the logo. This goes for my samsung s4 which has an even bigger logo on it blocking the view.
I have a nexus 10 and a samsung 500t and both of them came with a nice transparent oem protector. I just scissor clip the lift tab at the corner so the protector doesn't get peeled off. And there, save myself the trouble and cost of having to buy a screen protector..... Sucks.....
Click to expand...
Click to collapse
The thing is that the "OEM protectors" are only designed to keep the screen safe inside the packaging. They lack the real world protection of more engineered screen protectors. They don't want you to use the film supplied as they don't want you to feel that you are adequately protected, if you're a screen protector user. They may help keep very light scratches from the glass but when you really need a screen protector to do it's job, this will not.

Related

The Diamond screen-protector

Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...

[Q] Do you think the screen protector useful or not?

As you can see that many of us use screen protector.
But I always think, how dose the screen protector work as it should be or just a piece of cover.
If you think that works for you, please let us know why and how.
Thanks
yes its always help/.
yes
Yes it works,
you'll get less scratches, and when you can change it every time you want
Yes it helps, against scratches. But i get a less good feeling with my fingers on the screen, so i have removed my protection.
yes its always helpful... it protects your sccreen from damage n scrathes.. do u even know how much a new sceen costs?
Yep, kind off it helps in many ways. Like even if I get multiple scratches It wouldn't matter as I can get the screen guard changed. But If I didn't had it at ones that would cost me more.
Though now a days its trend for Gorilla Glass and vise versa!
I do not use it anymore. I had a cover for my Galaxy S2, and also a plastic 'sheet' to protect the front.
In my line of work I had quite some rough jobs wich resulted in hairy situations for the phone. Eventually I switched jobs last year, and these days I sit behind a desk. There is no use for the cover anymore. The front itself can withstand most of the daily stuff.
The cover for the back etc. might be handy if you drop your phone, but did you ever see those phone-drop-tests?
Bottomline: Obviously it's safer, but I don`t think people really need them.
hashkiki said:
As you can see that many of us use screen protector.
But I always think, how dose the screen protector work as it should be or just a piece of cover.
If you think that works for you, please let us know why and how.
Thanks
Click to expand...
Click to collapse
Well, I bought my xperia x10 USED. Seller told me that it has BIG SCRATCH on the bottom of the screen (btw, xperias screen is scratch-resist), and I told him that he has to lower the price, so he lowered price for 20€ ..When I bought it, I found out that there is a screen protector on it..So, I removed it, and I have a brand new phone..without scratch on the bottom of the screen ofcourse ..
So, if you are a seller, remove it if there is any scratches or something else..If you are a buyer, try to screw up a seller
Changed several of them already and my screen still doesn't have scratche
I've been using them on my epic 4g that I have had for the last couple months. But before that I didn't use them on my lg optimus v or HTC Eris.
Sent from my SPH-D700 using XDA App
I use no screen protector but I had one. There are no scratches on my phone now and I can wipe better. You have to be carefully without a protector.
I use a protector for 2 reasons. Firstly, for peace of mind. Yes, it's Gorilla glass which means it's less likely to get scratched, but there's no glass in the world that is completely scratch-proof, so it makes sense to cover it for that extra protection. Secondly, I use a matte (anti-glare) protector. It's good for reducing reflections and helping read the screen in brighter light, but it also stops fingerprints and greasy smudge marks.
Each to their own, but if I've got a £500 phone then I see no point in *not* chucking a few more quid at a protector.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
In my opinion, screen protectors can be very useful. There are different types of screen protectors, that offer different benefits to suit your needs.
The first kind of screen protector is a "clear" type, which is obviously clear, that offers scratch protection. The drawback of this type of protection is, because of the clear, craystal like finish, it creates a glare like effect, making it difficult to see the screen in direct sunlight, or brightly lit rooms.
The next type of screen protector (my favorite) is an "anti-glare", which has a matte finish. This type of screen protector not only prevents scratching, but it also cuts out the glare, does a great job of hiding fingerprints and smudges. It also provides a better feel when touching the screen, removing that "sticky" feeling when sliding your finger across the screen. The downside to this type of screen protector is that it slightly takes away from the sharpness or detail of the display. (only slightly though). A fair trade off, in my opinion.
The third type of screen protector is know as a "mirror" type. This protector has a mirror finish, which actually looks like a mirror. This type offers scratch protection, and because of it's mirror finish, also provides a level of privacy, making it difficult for other people to see what's on your screen. The downside to this type of protector is, because of the mirror finish, it makes it extremely difficult to see the screen under any lighting conditions. It also doesn't hide scratches very well.
Hope this helps!!
Sent from my Galaxy S II (SGH-i777) using XDA Premium.
i had a screen protector but i took it off, i didnt like it, it just didnt feel good, so i bought a phone bag. i only take my phone out of the bag when im really using it. no scratches so far. id reccomend a phone back and no protetor, but its everyones personal opinion how to use phone
It depends... If you have your phone in the same pocket as your keys it's usefull to have one. When you have your phone in an case it's not that usefull.
I like screen protectors but my hands and fingers are so dam rough it scratches the screen protector up, so I go threw screen protector a couple weeks, the protector would just get so scratch up
Sent from my HTC_A510c using XDA App
If you are rough on your phone, then yes; else no.
I've never used one and don't have notible scratches, but then again, I'm always very aware of how I'm handling my phone, and when I carry it around, I'll keep it in its pouch.
screen protector
very useful... if you plan sell your tab some day
I like my thing to be in very good shape, so yes

Good screen protectors?

Can anyone recommend a good brand of screen protector? I went with case mate, as I had one on my desire HD and was very pleased with it - it fitted great and even after a year it still had plenty of life in it.
However the one that turned up for my sensation is rubbish, it only covers the LCD area - no protection over the capacitive buttons, and I keep catching the top when swiping the notification bar, so it's lifting up already.
Ideally I'm after one that will cover the whole screen, and isn't cheap and nasty.
chrisund123 said:
Can anyone recommend a good brand of screen protector? I went with case mate, as I had one on my desire HD and was very pleased with it - it fitted great and even after a year it still had plenty of life in it.
However the one that turned up for my sensation is rubbish, it only covers the LCD area - no protection over the capacitive buttons, and I keep catching the top when swiping the notification bar, so it's lifting up already.
Ideally I'm after one that will cover the whole screen, and isn't cheap and nasty.
Click to expand...
Click to collapse
I have the OEM HTC ones I got from Expansys. You get two of them. I don't remember how much they cost though. I think you can get them through htcpedia.com as well.
http://www.expansys.com/htc-sensation-screen-protector-sp-p540-2-pieces-retail-pack-218032/
Didn't realise HTC did ones, will definitely check them out! Thanks for the heads up.
chrisund123 said:
Didn't realise HTC did ones, will definitely check them out! Thanks for the heads up.
Click to expand...
Click to collapse
They fit pretty exact too FYI. Any mm off and you gotta redo the stinkin thing lol. It took me a good 20 mins to place it on the way I want it. I mean if you are off, you will get some bubbles in the corners, but they fit the entire screen. There's a write up in this section back when the Senny first came out and everyone was clamoring in which screen protector to get. Some like others, I am happy with the OEM ones. I still have it on to this day. I have one hairline scratch from keys that can be seen in certain angles, but other than that, the protector is great IMO.
GL.
Cool, just bought a set from eBay. Can't be any worse than this one I'm usin now lol.
i personally like the the invisibleSHIELD by ZAGG theyre pretty good in quality and last a long time now with any screen rotector as you know with time it will get really scratched with use but you should try these maybe youll like them they usually range anywhere from.. 0.99 to 3.99 fir a pack just look around ebay amazon... etc etc
meckanoid said:
i personally like the the invisibleSHIELD by ZAGG theyre pretty good in quality and last a long time now with any screen rotector as you know with time it will get really scratched with use but you should try these maybe youll like them they usually range anywhere from.. 0.99 to 3.99 fir a pack just look around ebay amazon... etc etc
Click to expand...
Click to collapse
I like Zagg, but I tried it back for my ol Nexus One and the outer skin/protector was nice, but to me the screen protector was too hazy for me and also a little tacky for my taste. Did they change the material for the protector?
well to tell you the truth i think theyre material might have improved a tad bit in quality but its like everything it does wear out eventually with time but i can understand the hazy part it does tend to be a little bit a problem for me
Best thing is still using no protector. Tried several and always get the feeling my touch is less responsive.
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
i bought the iprotect crytalclear,
the distance from the corner to the screen protector is quite big (picture added) sometimes your finger gets stock, if you try to pull down the notification bar or using swipepad
i probally would buy another one
Well the HTC screen protectors (2 pack) arrived today, and again I'm slightly disappointed. On the plus side they are lovely and clear, and cover the whole of the screen. It's also very thin, so doesn't feel like its hampering the touch input at all (although my previous case mate screen protectors were thicker I never felt they effected the input either).
The biggest downside was that because they are so thin, they're near impossible to fit. After carefully peeling off the backing, you just cant hold the thing. It Took me forever to apply the first one, and subsequently it had one bit of dust trapped under it in the middle of the screen. Not much, but I'm a perfectionist! So one down, one to go... I peeled it off and tried again, this time I was rewarded with two specs of dust... But they were over the capacitive buttons so I'm willing to live with that.
The other problem I had was that the screen protectors were glued onto the packaging and if I'd just pulled them off they would have creased and been ruined. In the end I cut them off gently by sliding a sharp knife underneath them.
So, in conclusion I have a semi decent fitting screen protector on but I won't be buying these again when it reaches the end of its life.
I would highly recommend the Skinomi Techskin. I use them on all of my devices. Same concept as Zagg but they are a little thinner and the screen still retains the 'glass' feel. For me the Zagg is a bit too much and my finger drags on the screen at times with it.
The fit on the Sensation is perfect and installation isn't too difficult.
chrisund123 said:
Well the HTC screen protectors (2 pack) arrived today, and again I'm slightly disappointed. On the plus side they are lovely and clear, and cover the whole of the screen. It's also very thin, so doesn't feel like its hampering the touch input at all (although my previous case mate screen protectors were thicker I never felt they effected the input either).
The biggest downside was that because they are so thin, they're near impossible to fit. After carefully peeling off the backing, you just cant hold the thing. It Took me forever to apply the first one, and subsequently it had one bit of dust trapped under it in the middle of the screen. Not much, but I'm a perfectionist! So one down, one to go... I peeled it off and tried again, this time I was rewarded with two specs of dust... But they were over the capacitive buttons so I'm willing to live with that.
The other problem I had was that the screen protectors were glued onto the packaging and if I'd just pulled them off they would have creased and been ruined. In the end I cut them off gently by sliding a sharp knife underneath them.
So, in conclusion I have a semi decent fitting screen protector on but I won't be buying these again when it reaches the end of its life.
Click to expand...
Click to collapse
Have you tried the tape trick for the dust? It's always best to put screen protectors on somewhere dust free like the bathroom. Always wash your hands before as well.
And I myself took a good 20 mins putting on mine because of the exact fit of them. I had to take off and reapply like 7 times. But I got the hang of it as of now. And if you are greeted with specks of dust, get a piece of scotch tape. Lift one end of the screen protector with another piece of scotch tape that is closest to your speck(s) and then use the scotch tape in your other hand to stick the particles from the screen protector or screen itself. It takes some finesse but it can be done, I have confidence in you! :victory: lol
Here's a more recent pic of the HTC screen protector. I do have minor bubbling on the corners because I just redid the Screen protector to align correctly because the case I have on which I just got kept lifting it. Reason being, the screen protector was off to the right a bit lol. I can live with the minor bubbling on the corners and you can't see the bubbles when looking straight at it either. See the second pic
kpjimmy said:
Have you tried the tape trick for the dust? It's always best to put screen protectors on somewhere dust free like the bathroom. Always wash your hands before as well.
And I myself took a good 20 mins putting on mine because of the exact fit of them. I had to take off and reapply like 7 times. But I got the hang of it as of now. And if you are greeted with specks of dust, get a piece of scotch tape. Lift one end of the screen protector with another piece of scotch tape that is closest to your speck(s) and then use the scotch tape in your other hand to stick the particles from the screen protector or screen itself. It takes some finesse but it can be done, I have confidence in you! :victory: lol
Here's a more recent pic of the HTC screen protector. I do have minor bubbling on the corners because I just redid the Screen protector to align correctly because the case I have on which I just got kept lifting it. Reason being, the screen protector was off to the right a bit lol. I can live with the minor bubbling on the corners and you can't see the bubbles when looking straight at it either. See the second pic
Click to expand...
Click to collapse
woww, what a great lockscreen!!
Where didi you get it from?
piratashitzu said:
woww, what a great lockscreen!!
Where didi you get it from?
Click to expand...
Click to collapse
Thanks, I created it with the inspiration from cvdesignlab from mycolorscreen. The lockscreen is widgetlocker which consists of three UCCW widgets, which I created the call/email/text(each has hotspots to the corresponding app) and battery charging widget, the weather widget in the middle reporting on my local weather, which has a hotspot, when pressed, goes to my weather app of choice.
And a "hotspot" is a term by the app creator, meaning when created, the corresponding hotspot will auto open any app you direct using the UCCW app.
And the time is a simple edit to an existing clock found in the UCCW thread made by the author of the app. Oh and the calendar right below the weather is my minimalistic text widget I created because I almost missed a dental appt a few weeks ago lol
There are a bit of parts to it but it has all the info I need at first glance without needing to get "into" the phone.
i use Ishieldz, and its the best screen protector i've had!
Skinomi as many people have mention about
Sent w/ HTC Sensation 4G (Z710a) XDA Premium
ebay these are the ones i use dont last long but they are good
If you have trouble getting the edges to settle. Apply the screen protector as best you can. Then grab a hair drier, set it to hot and from about 12 inches warm up the phone. Keep moving the hair dryer as you can burn yourself. Keep doing that while working the edges down with your other hand. I have big hands so I can hold the phone in my hand and use my thumb. Eventually they will stick.
I too have BS ebay screen protectors and the reason it covers only the LCD area and not the entire face is because of the curvature at the edges.
I haven`t been using anything for almost a year and my screen is perfect...

XO, BSE, SGP or something else?

Which will be the best screen protector? Which is the best based off your past experiences?
I am in the UK and willing to order from the US but I'm not sure which is the best. I still need to sell my unused XO from my Galaxy Nexus
UK here too. I've tried Zagg, Skinomi and BSE in the past. BSE are undoubtedly the best of those 3
I'm having trouble deciding on a screen protector as well, but I've always gotten the InvisibleSHIELD. I mostly do so because I can buy the full body skin (or any of the kits they sell), then take it to the mall and they'll apply it all free of charge. If they screw up (they never do), then they'll give me a brand new one. If it gets all scratched up, gets a bubble, or ANYTHING, I just take it to the mall (without a receipt or box or anything) and they'll replace it all totally free. If I screw up applying other protectors, I don't want to have to ship it back and wait for a new one. While others do sometimes have kiosks (from what I've heard), I have yet to actually see one. I've never minded the whole orange peel thing personally, so it doesn't really affect my decision by much. I just love their warranty in combination with the kiosks. It makes it very easy.
Another thing I'm worried about is this: If I get the full body kit, can I still use a case, or will the friction of putting the case on be enough to screw it up? Has anyone had this issue? Should I just get a front and back kit instead? I plan on using case with the phone to protect from drops and what not, I usually just get a Speck Candy Shell or something, although I'm a huge fan of the LifeProof cases since they look good and offer great protection (either or not they'll make a Nexus 4 case is a different story, I suppose).
BSE all the way
...already on order.
Sent from my HTC One X using Tapatalk 2
How is the touch feeling of BSE ? Similar to glass or sticky like Zagg ?
They are all very similar. I usually go with Skinomi because of the price. I already pre-ordered it off Amazon.
I love XO skins. I just ordered one for the Nexus 4.
Sent from my GSM Galaxy Nexus using Tapatalk 2
sgp steinheil is the best it feels smooth like its not there but is extremly hard my nexus s has deep scratches on the screen protector that havent even touched the glass
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Well I don't know what kind of screen protectors you've been using but the ones I've used don't have any effect on the sensitivity of the touchscreen. I am careful with my stuff anyway but the small hairline scratches really annoy/bother me for some reason.
espionage724 said:
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Click to expand...
Click to collapse
Protection is absolutely necessary for me since I work in construction/maintenance
I personally love steinheil! ( SGP )
I'm going for Ghost Armor actually.
Your question is the best for the N4. But nobody has any of these screen protectors made for the N4, and only a couple really lucky people have the phone. None of the opinions in your poll are actually based on experience with this device and this protector. Wait until people start getting them and then look at reviews.
chrisjcks said:
BSE all the way
...already on order.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
where you order it??? Icant decide
I'm going with BSE because I've heard a lot of good things about them. Plus I like the wet apply idea. I've ALWAYS had problems with the sticky dry screen protectors. One little piece of fuzz or dust and you have annoying bubbles every where. And over time bits of fuzz/lint get up around the corners and it slowly starts to peel off.
espionage724 said:
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Click to expand...
Click to collapse
I'm sorry, but it doesn't matter what you do. Before you know it you'll be in direct sunlight and you'll see all sorts of small little scratches. Then later, you'll always know they're there. I'm OCD about it. I can't stand having the tiny little scratches because I want my phone to stay new. I think the first time you put a phone in your pocket, it gets some sort of tiny little scratch from something.. then over time they build up and make the screen look aweful. Plus its funny you say pens and keys because those things wont scratch gorilla glass. I've tired a key on my old Atrix and nothing comes from it. It's actually particles of dust that have maybe glass or something else hard, or sand.
I want a dry applied one and really wanna know if a dry one can cover the entire screen of Nexus 4.......
XO Skins are the ones I have been using for a few years now. From what I have read xo and sgp are the only ones without orange peel. I don't know how the sgp do on curves though I posted a review of xo in my signature when I had the samsung google nexus
BravoMotorola said:
Plus its funny you say pens and keys because those things wont scratch gorilla glass. I've tired a key on my old Atrix and nothing comes from it. It's actually particles of dust that have maybe glass or something else hard, or sand.
Click to expand...
Click to collapse
Exactly, all these videos of people dropping coins/keys on the phone are pointless. swipe over that phone just once with sand paper and its all over...
Emama said:
I want a dry applied one and really wanna know if a dry one can cover the entire screen of Nexus 4.......
Click to expand...
Click to collapse
Me too. I ordered some of these:
http://www.protectionfilms24.com/article/vikuiti-adqc27-screen-protector-google-nexus-4-126198.html
They were great on my G2 but it has a flat screen. I'll let people know after I get them. I will be disappointed if they don't properly stay on the screen.
What is this "Orange peel" that people are referring to?

Screen protector\Case?

Just picked up myself a 32gb version off amazon for 464 total and will be recieving monday(stupid best buy didnt have it in stock(the closest store that had it was in texas!!(im in tucson)))
but my question is, should i get a case and\or screen protector
i picked and felt around the display one in the best buy near my dorm and loved it so i bought one but i will probably be taking it with me too classes and work and stuff so i may need a case and gaurd
what do you think?? what are you reccomendations,
if i was to get a case, i dont really want a tri-fold one, and i would want it to be soft on the inside and (fake) leather on the outside
in terms of screen protectors...it shjould probably be scratch filling because i will have the tablet for a few days with normal use before finally receiving it
but im open to suggestions, any ideas?
thanks,
I have a screen protector made by mr. Shield, its great. And i ordered a moko case, but it hasnt arrived yet.
I can recommend this tempered glass screen protector: http://www.amazon.com/gp/product/B0...ode=as2&tag=fiabte-20&linkId=D2LUGFFLTS3RY4YJ
It feels like the original screen, is really scratch resistant (tested with metal knife and keys with high pressure) and is very clear. The application is easy and bubble free as long as you don't have a big dust corn under the protector, fine scratches in the screen will become invisible.
simmac said:
I can recommend this tempered glass screen protector: http://www.amazon.com/gp/product/B0...ode=as2&tag=fiabte-20&linkId=D2LUGFFLTS3RY4YJ
It feels like the original screen, is really scratch resistant (tested with metal knife and keys with high pressure) and is very clear. The application is easy and bubble free as long as you don't have a big dust corn under the protector, fine scratches in the screen will become invisible.
Click to expand...
Click to collapse
wow sounds helpful, like something i might need.
mind if i ask a few more questions?
1. is it flexible
2. is there a high chance of it breaking during shipping
3. is it difficult to put on
4. is it difficult to take off?(like how other, non-tempered ones peel away)
5. if i were to drop the tablet, would i shatter the screen protector?
6. how much did yours cost?(was\is it on sale?)
7. what are the downsides to using this screen protector?
BTW thanks for including the link, very very helpful
ive never had a tempered glass screen protector as you can tell lol
zawata said:
1. is it flexible
2. is there a high chance of it breaking during shipping
3. is it difficult to put on
4. is it difficult to take off?(like how other, non-tempered ones peel away)
5. if i were to drop the tablet, would i shatter the screen protector?
6. how much did yours cost?(was\is it on sale?)
7. what are the downsides to using this screen protector?
Click to expand...
Click to collapse
1) Yes, you can bend it a few degrees, I didn't want to bend it more.
2) The glass comes in a hard plastic case, so I would say no.
3) You have to ensure that your screen is clean (for best results turn on the shower hot until you have steam, turn it off and wait a few minutes, this will take the dust corns down. Clean the screen and apply the protector in the steamed bathroom), and I recommend to put some sticky film on the sides so you can hold the panel without touching it.
Once the protector is aligned perfectly, apply pressure and you will see that it applies itself. Don't fear bubbles, they will go away within minutes if you apply pressure and gently "massage" it.
4) I once removed a tempered glass protector from a nexus 5 (not mine though), you have to take it off on one corner which can be kind of difficult, but once you can lift it off, it won't leave any residue.
5) Probably, never had to try that.
6) Mine cost about 10€ (~12,50$), amazon showed it as sale, but most probably it always has this price.
7) With SOME styluses you may have an decreased sensibility, but my metal mash stylus works fine.
Also, it might break without falling under certain circumstances. But rarely.
I hope, I could help you!
simmac said:
1) Yes, you can bend it a few degrees, I didn't want to bend it more.
2) The glass comes in a hard plastic case, so I would say no.
3) You have to ensure that your screen is clean (for best results turn on the shower hot until you have steam, turn it off and wait a few minutes, this will take the dust corns down. Clean the screen and apply the protector in the steamed bathroom), and I recommend to put some sticky film on the sides so you can hold the panel without touching it.
Once the protector is aligned perfectly, apply pressure and you will see that it applies itself. Don't fear bubbles, they will go away within minutes if you apply pressure and gently "massage" it.
4) I once removed a tempered glass protector from a nexus 5 (not mine though), you have to take it off on one corner which can be kind of difficult, but once you can lift it off, it won't leave any residue.
5) Probably, never had to try that.
6) Mine cost about 10€ (~12,50$), amazon showed it as sale, but most probably it always has this price.
7) With SOME styluses you may have an decreased sensibility, but my metal mash stylus works fine.
Also, it might break without falling under certain circumstances. But rarely.
I hope, I could help you!
Click to expand...
Click to collapse
Very helpful thank you
I'll imagine the slight bending is meant to address the slight bending of the tablet
The shower technique should be especially helpful, I've never heard that one before(good thing my dorm has extra hot showers)
By sticky film do you mean tape?
Other than a small chance of breaking, i think the benefits outweigh the costs. You've successfully convinced me
Is there like a warranty I can get on it? Because that feels like something I might need
You are welcome, I first read about tempered glass protectors on this forum, since then I won't go without one.
zawata said:
By sticky film do you mean tape?
Is there like a warranty I can get on it? Because that feels like something I might need
Click to expand...
Click to collapse
Oh yes, english is not my mother tongue, so I forgot the vocab.
I think amazon gives you one or two years warranty, but I'm not sure about the situation in the US.
zawata said:
Just picked up myself a 32gb version off amazon for 464 total and will be recieving monday(stupid best buy didnt have it in stock(the closest store that had it was in texas!!(im in tucson)))
but my question is, should i get a case and\or screen protector
i picked and felt around the display one in the best buy near my dorm and loved it so i bought one but i will probably be taking it with me too classes and work and stuff so i may need a case and gaurd
what do you think?? what are you reccomendations,
if i was to get a case, i dont really want a tri-fold one, and i would want it to be soft on the inside and (fake) leather on the outside
in terms of screen protectors...it shjould probably be scratch filling because i will have the tablet for a few days with normal use before finally receiving it
but im open to suggestions, any ideas?
thanks,
Click to expand...
Click to collapse
Get a case or a screen protector. Getting both is kinda redundant.
Get screen protector if you want to keep the look of your tablet. You might also consider getting a skin for the backside to prevent the back from getting scratched.
Get a case if you want both screen protection and some drop protection and you don't mind the slight bulkiness of the case.
mkygod said:
Get a case or a screen protector. Getting both is kinda redundant.
Get screen protector if you want to keep the look of your tablet. You might also consider getting a skin for the backside to prevent the back from getting scratched.
Get a case if you want both screen protection and some drop protection and you don't mind the slight bulkiness of the case.
Click to expand...
Click to collapse
Didn't think about it like that,
The most important thing is that I don't want the screen scratched so that's top priority
The case I can see as less important though thanks

Categories

Resources