Database Info

Asus Transformer Does Nor Open

i think it is hard bricked. i can only insert download mod. what should i do ?

You need to be a bit more specific... if you want someone to help you.

i tryied to unroot my transformer and read a couple thing it says 1.install stock rom 2.remove clockwork recovery but i did reverse step so i cant access clockwork but my transformer have custom rom
i am sory for my english

baturhan.top said:
i tryied to unroot my transformer and read a couple thing it says 1.install stock rom 2.remove clockwork recovery but i did reverse step so i cant access clockwork but my transformer have custom rom
i am sory for my english
Click to expand...
Click to collapse
You're not "hard brick" heck I don't think you're "bricked" at all.
Can you still boot into the OS (ROM)?
Use RecoveryInstaller, install CWM again.
Download a stock official firmware from Asus (for your region)
Extract the zip file from within and put it where CWM can read it
Boot into CWM and flash the zip file.
Reboot

[q] can you flash rom w/fastboot

I somehow have locked myself out but still have access to CWM and FASTBOOT. So, how do I use FASTBOOT to install a rom? Is it even possible? I just flashed CWM again, but still cannot get my CWM Backup copy to work.

up.
My friend has same issue, change build.prop.. no backup, no adb, only fastboot with cwm. Any ideas? Ext SD don't work in CWM\TWRP.
upd: Answer myself - Plug into usb in recovery, update driver in device manager to ADB Device, use adb

See here http://forum.xda-developers.com/showthread.php?t=1680570

What happens if clockworkmod recovery cannot read zip files???

fastboot flash zip rom.zip

prototype7 said:
fastboot flash zip rom.zip
Click to expand...
Click to collapse
Do I need a system.img file???

ri123 said:
Do I need a system.img file???
Click to expand...
Click to collapse
No, just the regular zip, you could also try reflashing the recovery (fastboot flash recovery recovery.img).

prototype7 said:
No, just the regular zip, you could also try reflashing the recovery (fastboot flash recovery recovery.img).
Click to expand...
Click to collapse
What about fastboot update command???

No
Hit the thanks button if i helped

Is this procedure compatible with the meta inf folder???

noooo!! i try "fastboot flash zip rom.zip" and it says FAILED remote partition does not exist!! what can i do now??

nooo!!! it says ( failed remote partition does not exist)

Xperia S with the same problem mine says
(remote: Partition not found)

The command you can used to flash a zipped ROM like the stock one from Asus is...
Fastboot -i 0x0b05 flash system yourrom.zip
I usually flash these using twrp recovery but I think that will do it.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

Maybe I just can't follow instructions or anythng, but I attempted my first ROM flash and it didn't work.
I tried the Blackbean 5 ROM, with TWRP. I found a set of instructions saying how to flash with TWRP, so I followed them, and I think I've soft-bricked my TF300T. Just stays on the Asus logo, and in top left it says "The Device is UnLocked."
I DID make a recovery in TWRP, and I attempted to flash that back with no luck.
Maybe I'm doing it wrong, so can someone help me out here?
funnel71 said:
The command you can used to flash a zipped ROM like the stock one from Asus is...
Fastboot -i 0x0b05 flash system yourrom.zip
I usually flash these using twrp recovery but I think that will do it.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
I tried this with the stock ROM, from their website, and it didn't help...
So I'm not sure what my problem is now.
Then again, when it comes to ROMs, I'm a noob.
EDIT: I still have TWRP, my recovery, and the Blackbean ROM .zip on the device.

TsarProdigy said:
Maybe I just can't follow instructions or anythng, but I attempted my first ROM flash and it didn't work.
I tried the Blackbean 5 ROM, with TWRP. I found a set of instructions saying how to flash with TWRP, so I followed them, and I think I've soft-bricked my TF300T. Just stays on the Asus logo, and in top left it says "The Device is UnLocked."
I DID make a recovery in TWRP, and I attempted to flash that back with no luck.
Maybe I'm doing it wrong, so can someone help me out here?
I tried this with the stock ROM, from their website, and it didn't help...
So I'm not sure what my problem is now.
Then again, when it comes to ROMs, I'm a noob.
EDIT: I still have TWRP, my recovery, and the Blackbean ROM .zip on the device.
Click to expand...
Click to collapse
Background first when stock were you JB or ICS? Blackbean OP does not specify. At the moment I'm to lazy to read through thread or flash to find the answer. If you were on stock JB you can only use JB roms, if you were on ICS you can only use JB after stock upgrade to JB.
Forget Blackbean for now and let's concentrate on getting you fully functional on stock again. If you were on ICS then download stock 9.4.3.30 and unzip once that leaves you with a zip. Place that zip on your ( /sdcard ) or external sdcard ( /Removable/MicroSD ) and flash with Twrp. If you were JB then the instructions are the same except use stock 10.4.2.13.
If you do this you will loose your recovery ( Twrp ) but you should have a functional unit.
Non stock rom install.
Be sure you use proper rom for your bootloader ( ICS or JB ). Choose one that gives you instructions as to what to wipe, etc. You can adlib after you get your feet wet. If the op gives instructions use them if not then you may or may not have a happy ending with generic instructions.:good:
If you need anything explained let me know and I'll step by step for what you don't understand.
The reply you tried to follow said "I think", you should have investigated before following. Don't get me wrong, I'm not saying that was incorrect but the poster was in doubt and you should be also.
When we say "I think" we kind of assume you are going to do some reading and be comfortable with everything before you continue.
I took a little time to look over Blackbean and as I suspected it is for the ICS bootloader not JB.

same problem
I am having the exact same problem. I did manage to install the clean rom 2.5 custom rom successfully originally, and i made a backup through CWM, but I cant install any other rom on there for some reason. Yesterday I managed to go back to stock Asus jellybean rom successfully, and then had to root it and install CWM again successfully. I have again tried again today to install that EuroSkank rom, but alas, I get stuck at the ASUS boot logo permanently and nothing happens?
What might I be doing wrong??
I am on Jellybean. Thankfully the CWM is working fine and I could also restore my cleanrom2.5 backup.
tobdaryl said:
Background first when stock were you JB or ICS? Blackbean OP does not specify. At the moment I'm to lazy to read through thread or flash to find the answer. If you were on stock JB you can only use JB roms, if you were on ICS you can only use JB after stock upgrade to JB.
Forget Blackbean for now and let's concentrate on getting you fully functional on stock again. If you were on ICS then download stock 9.4.3.30 and unzip once that leaves you with a zip. Place that zip on your ( /sdcard ) or external sdcard ( /Removable/MicroSD ) and flash with Twrp. If you were JB then the instructions are the same except use stock 10.4.2.13.
If you do this you will loose your recovery ( Twrp ) but you should have a functional unit.
Non stock rom install.
Be sure you use proper rom for your bootloader ( ICS or JB ). Choose one that gives you instructions as to what to wipe, etc. You can adlib after you get your feet wet. If the op gives instructions use them if not then you may or may not have a happy ending with generic instructions.:good:
If you need anything explained let me know and I'll step by step for what you don't understand.
The reply you tried to follow said "I think", you should have investigated before following. Don't get me wrong, I'm not saying that was incorrect but the poster was in doubt and you should be also.
When we say "I think" we kind of assume you are going to do some reading and be comfortable with everything before you continue.
I took a little time to look over Blackbean and as I suspected it is for the ICS bootloader not JB.
Click to expand...
Click to collapse

maggoty said:
I am having the exact same problem. I did manage to install the clean rom 2.5 custom rom successfully originally, and i made a backup through CWM, but I cant install any other rom on there for some reason. Yesterday I managed to go back to stock Asus jellybean rom successfully, and then had to root it and install CWM again successfully. I have again tried again today to install that EuroSkank rom, but alas, I get stuck at the ASUS boot logo permanently and nothing happens?
What might I be doing wrong??
I am on Jellybean. Thankfully the CWM is working fine and I could also restore my cleanrom2.5 backup.
Click to expand...
Click to collapse
( EuroSkank ) is also an ICS rom not JB - Clean rom 2.5 is JB. For now unless you have NVFlash you can't go back to ICS from JB and you can't run ICS rom with JB bootloader. (I'm using ICS and JB here to declare the bootloader )

Ok, Thank you very much.
tobdaryl said:
( EuroSkank ) is also an ICS rom not JB - Clean rom 2.5 is JB. For now unless you have NVFlash you can't go back to ICS from JB and you can't run ICS rom with JB bootloader. (I'm using ICS and JB here to declare the bootloader )
Click to expand...
Click to collapse

any1 with Partition not found problem, open zip and look at the folders, delete everything except folder you want (which is propably system) then write
fastboot flash system yourzip.zip
if this doesn't work for you then extract files from the folder and repack only files from the system folder and use the command above.
It doesn't work for me (dunno why) but it's something

Can't load recovery

Hello everyone,
My problem is this: I wanted to install a CM10 nightly on the device, so I root using the DebugfsRoot method, install rom manager, flash a recovery, try to install a ROM and it did not work. Rebooting into recovery got me the red triangle, but using the volume buttons allowed me to get in (only it did not have the option to install updates or anything. I think it was just he mounting and partition options)
Since I did not unlock the device before doing this, I chose to do so using ASUS's unlock utility. Once done, I tried booting into recovery, but the device would be stuck at "booting recovery kernel image" and won't budge. I tried flashing different version of CW but it did not seem to work.
Finally, for some reason, I chose the "wipe data" option from the bootloader and the device was stuck, again, at "booting recovery kernel image", only this time I can't boot into a ROM nor can I boot back into bootloader.
What happens when I boot using power and volume down is this:-
The device is Unlocked
Android cardhu-user bootloader <2.10 e> released by "US_epad-9.4.5.26-20120720" A03
Checking for android ota recovery
Booting recovery kernel image
and then everything's stuck.
Booting normally makes the device stop at "the device is unlocked" message because, I assume, there is no ROM flashed into the device.
Thanks for helping in advance.

It's not just that I can't get the unit to go into recovery, It's that I can't even get to fastboot (it tries to go into recovery every time I try to get into fastboot)

ShiroiKage said:
It's not just that I can't get the unit to go into recovery, It's that I can't even get to fastboot (it tries to go into recovery every time I try to get into fastboot)
Click to expand...
Click to collapse
I believe your device is bricked. Using a wrong version of custom recovery may caused this. I haven't seen anyone able to fix the issue that you having right now, the only thing is to send out to Asus for repair.

buhohitr said:
I believe your device is bricked. Using a wrong version of custom recovery may caused this. I haven't seen anyone able to fix the issue that you having right now, the only thing is to send out to Asus for repair.
Click to expand...
Click to collapse
So, if I get it repaired/replaced, what version of CW recovery should I get? It seems that there is not, yet, a version for the Infinity tab. I really want to get a custom ROM because the stuff ASUS has slapped on their version of Android gets under my skin.

ShiroiKage said:
So, if I get it repaired/replaced, what version of CW recovery should I get? It seems that there is not, yet, a version for the Infinity tab. I really want to get a custom ROM because the stuff ASUS has slapped on their version of Android gets under my skin.
Click to expand...
Click to collapse
The Team Win TWRP version 2.3.1.0 works really well. It's a touch recovery and very easy to use and full featured.

okantomi said:
The Team Win TWRP version 2.3.1.0 works really well. It's a touch recovery and very easy to use and full featured.
Click to expand...
Click to collapse
One very last question:-
Would it work if I get the CM10 nightly for the TF300T installed on a TF700T (since it's practically the same device with a different screen)? If not, is there a ROM that's pure JB without ASUS's stuff installed one it?
Your replies are very much appreciated.

ShiroiKage said:
One very last question:-
Would it work if I get the CM10 nightly for the TF300T installed on a TF700T (since it's practically the same device with a different screen)? If not, is there a ROM that's pure JB without ASUS's stuff installed one it?
Your replies are very much appreciated.
Click to expand...
Click to collapse
I would NOT recommend you do so with tf300 on tf700. There is no pure stock debloated version for JB, however, if you want to stay as close as stock and stable I would recommend "Cleanrom for JB". This rom doesn't have Asus bloatware and a few performance tweaks make it very good.

buhohitr said:
I would NOT recommend you do so with tf300 on tf700. There is no pure stock debloated version for JB, however, if you want to stay as close as stock and stable I would recommend "Cleanrom for JB". This rom doesn't have Asus bloatware and a few performance tweaks make it very good.
Click to expand...
Click to collapse
So I got it replaced (Best Buy swapped it for a new one) and everything's fine. I even installed Clean ROM and it's good. Problem is that the left speaker is not working and I need to flash the stock ROM to make sure it's nothing caused by software, before I go back and re-return the unit. However, ASUS's firmware is not longer wanting to flash. It gives me the "failed" message in TWR's recovery (no backup because my internal memory was wiped when installing ASUS's JB update :/)
EDIT: Never mind. I thought the holes at the bottom, on either side of the USP port, were the speakers. Turns out I was not thinking straight. Still, I'd like to know if anyone has an idea as to why the ASUS firmware is not wanting to install.

ShiroiKage said:
So I got it replaced (Best Buy swapped it for a new one) and everything's fine. I even installed Clean ROM and it's good. Problem is that the left speaker is not working and I need to flash the stock ROM to make sure it's nothing caused by software, before I go back and re-return the unit. However, ASUS's firmware is not longer wanting to flash. It gives me the "failed" message in TWR's recovery (no backup because my internal memory was wiped when installing ASUS's JB update :/)
EDIT: Never mind. I thought the holes at the bottom, on either side of the USP port, were the speakers. Turns out I was not thinking straight. Still, I'd like to know if anyone has an idea as to why the ASUS firmware is not wanting to install.
Click to expand...
Click to collapse
You can't install the ASUS firmware through custom recovery. It has to be stock. I believe there are signature checks that prevent it from installing otherwise.
Sent from my ASUS Transformer Pad TF700T

did you unzip the file? should be a zip within a zip. you flash the zip inside

lafester said:
did you unzip the file? should be a zip within a zip. you flash the zip inside
Click to expand...
Click to collapse
You know, I unzipped the file the first time I installed it to get Clean ROM to flash, I had the unzipped folder there yet I managed to forget to use the unzipped file. /InfiniteFacePalm

Wrong Cwm installed, Please Help!

Hi Everybody, i'm new here.
As tittle says, i've installed a wrong cwm recovery on my tab.
My tab is a Samsung Galaxy Tab 7 Plus (gt-p6210), and i was using Cyanogenmod 9 with 5.0.2 CWM recovery. but a few days ago, i wanted to upgrade to cyanogenmod 10 version, and i did it. the problem came when wanted to upgrade my CWM.
I downloaded the wrong file, put it in a zip package in my sd card, and install it in recovery mode, device reboot, all ok. then i re-installed the ROM ( with zip file), and all was baadd, fully unstable.
So, i try to reinstall the old CWM and i cant.
Plz Help!! i was all weekend searching information with no success.

hope this helps
PeLaOmoNkY said:
Hi Everybody, i'm new here.
As tittle says, i've installed a wrong cwm recovery on my tab.
My tab is a Samsung Galaxy Tab 7 Plus (gt-p6210), and i was using Cyanogenmod 9 with 5.0.2 CWM recovery. but a few days ago, i wanted to upgrade to cyanogenmod 10 version, and i did it. the problem came when wanted to upgrade my CWM.
I downloaded the wrong file, put it in a zip package in my sd card, and install it in recovery mode, device reboot, all ok. then i re-installed the ROM ( with zip file), and all was baadd, fully unstable.
So, i try to reinstall the old CWM and i cant.
Plz Help!! i was all weekend searching information with no success.
Click to expand...
Click to collapse
hey,just go to this (http://www.mediafire.com/?fx5lk925vr28yqi) and click on download and flash the recovery.
PRESS THANXX BUTTON IF HELPED

thx, but i did that a lot of times, my tab says "this should only be installed on a gt-p6210". she thinks she's a T869 model.
i'm trying to use heimdall but i get the error "tar header contained invalid file size", i downloaded the file several times and still not working, search in several forums and i cant find the solution.

Guys i really need help plz!
i have installed the SGH-T869 CWM Recoveryon my GT-P6210.
i have a week trying to install the correct version, only using zip packages, because i cant use heimdal ( getting error about tar size)
really dont know what more else i have to do...

[Q] Help understanding my current rom/recovery situation

Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.

Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
The stock Asus firmware includes bootloader, kernel, recovery and apps. You have flashed the stock recovery. Head over to the twrp thread or my ROM thread in my sig to see how to get twrp 2.5 onto your tab.

Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
Yes, you did. Everytime you install stock file of any version, it will update your bootloader, rom, and kernel. Just use Motochopper to root your device and reinstall your custom recovery with goomanager.
No, it is stock recovery. Just reroot with motochopper and install custom recovery with goomanager. Have fun. :good:

Right, thanks! If I want to stay completely stock I just need to figure out why the newer update is failing. Could be the file name now I think about it.
Otherwise I'll re-root and re-TWRP...

Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
The Android on his back is your stock recovery and it does not find a valid update file.
Weird is, that your system seems to see the 10.6.1.14 file (I assume you get an automatic notification and click "install" or "update" ) and then the recovery does not seem to install it...?
You could have a bad download, so try that first if you want to get the latest stock rom, or you can try to rename the downloaded file to EP201_768_SDUPDATE.zip, put it on your microSD card and reboot into recovery. The recovery should recognize the update file and start flashing it.
But since you are unlocked anyway - why don't you give CromiX a try? It runs so much better than the stock rom!
And for that, yes you would have to root again using the Motochopper tool and then install TWRP 2.5 with Goo Manager.
If you go that route make sure you flash the latest bootloader from the OP of the CROMiX thread first, boot back into your old rom once before you flash CROMiX.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

Alright, I'm convinced - I'll try going totally custom! Presumably CromiX handles the external keyboard and touch pad properly?

Anatosuchus said:
Alright, I'm convinced - I'll try going totally custom! Presumably CromiX handles the external keyboard and touch pad properly?
Click to expand...
Click to collapse
It's based on the stock rom, cleaned up and tweaked and optimized. Everything works - and better than on stock! I recommend selecting the option to disable fsync during installation. It boosts performance considerably, and since the rom is totally stable, the "risk" is neglible.
You will love it!
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

OK, ChromiX installed! Looks interesting already, will tinker with it over the next couple of days.