Related
INSTALLED ICS PORT ON MY SG3 5801, BUT MY PHONE SWITCHING OFF AUTOMATICALLY
I Have Installed ICS Port on my Mobile Galaxy 3 GT-I5801
bt my fone is switching off when it sleeps
n getting prob during calls
Please Help me
n teleme how to install Build3 kernel for ICS build3..
here is the link from wer i got these file
http://forum.xda-developers.com/showthread.php?t=1374691
I have downloaded build3 bt didnt install kernel
Why this is happening please help !!!!
Thankyou
Like my teacher says, the answer is in the question.
Install the build 3 kernel and all the problems would be solved.
Hope this helps!
ak700 said:
Like my teacher says, the answer is in the question.
Install the build 3 kernel and all the problems would be solved.
Hope this helps!
Click to expand...
Click to collapse
He can install also Arakmar's hybrid kernel
facing a horrible lag even after installing arakmars kernel. after a day or so of working perfectly, when i unlock the phone the touchscreen doesn't respond for about two minutes, and while this goes away on reboot, i end up rebooting once a day to keep it working.
ak700 said:
Like my teacher says, the answer is in the question.
Install the build 3 kernel and all the problems would be solved.
Hope this helps!
Click to expand...
Click to collapse
I too have the same problem.
Where will i get the Kernel build 3?
How to flash it?
Pls help.
vkssreedharan said:
I too have the same problem.
Where will i get the Kernel build 3?
How to flash it?
Pls help.
Click to expand...
Click to collapse
Dude this post is five months old
Then I think we only had build 3
If you flash that kernel what is the point in having build 4
Flash build 4 and then try flashing g3mod or arakmar's one and your phone will be fine
Sent from my GT-I5800
So after installing this amazing rom and loving it for a week or two; I see a kernel update and install it. Everything went smooth but I lost my wifi after the fact. I was hoping someone could help me keep the kernel and get the wifi going. nothing about wifi problems were stated and it work fine previously. I wiped everything and even tried the wifi fix manager thingy i got with the ics rom i was running previously to see if that would do it but to no avail. I wanted to ask the developer but need some 10 post so help a bro out!
p.s....gotta give props to the man who had me running jb before anyone of my friends with newer phones!!! RANDOMBLAME!!!!
bboygmoney said:
So after installing this amazing rom and loving it for a week or two; I see a kernel update and install it. Everything went smooth but I lost my wifi after the fact. I was hoping someone could help me keep the kernel and get the wifi going. nothing about wifi problems were stated and it work fine previously. I wiped everything and even tried the wifi fix manager thingy i got with the ics rom i was running previously to see if that would do it but to no avail. I wanted to ask the developer but need some 10 post so help a bro out!
p.s....gotta give props to the man who had me running jb before anyone of my friends with newer phones!!! RANDOMBLAME!!!!
Click to expand...
Click to collapse
ditto, this happend with my Paranoidandroid install as well. kernel allowed me to stay running without crash, but wifi is a pretty big letdown...
unfortunatly, without the kernel itself being fixed, or the wifi module fixed, we are stuck looking for another alternate kernel... oh yeah, we are pretty limited.
thanks
appreciate the quick reply man. And I'll be keeping my eye out then
bboygmoney said:
appreciate the quick reply man. And I'll be keeping my eye out then
Click to expand...
Click to collapse
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
dakunesu said:
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
Click to expand...
Click to collapse
So I'm only using it with jelly time or jb. I'm flashing the os then the kernel cuz the os installs its own. This is an updated kernel for the os.I'm thinking i should maybe wipe the cache partition after the the os then do the kernel but at the same time I would think that other problems would be happening if that was the issue. What do you think?
bboygmoney said:
So I'm only using it with jelly time or jb. I'm flashing the os then the kernel cuz the os installs its own. This is an updated kernel for the os.I'm thinking i should maybe wipe the cache partition after the the os then do the kernel but at the same time I would think that other problems would be happening if that was the issue. What do you think?
Click to expand...
Click to collapse
does the system function without the kernel update?
if it does, you might want to hold off on updating til the ROM updates for it.
dakunesu said:
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
Click to expand...
Click to collapse
dakunesu said:
does the system function without the kernel update?
if it does, you might want to hold off on updating til the ROM updates for it.
Click to expand...
Click to collapse
It does. N You know I am not even sure what advantages I get from this updated kernel anyways lol but I want it!!
problem solved!
bboygmoney said:
It does. N You know I am not even sure what advantages I get from this updated kernel anyways lol but I want it!!
Click to expand...
Click to collapse
The ROM was updated and the kernel included in the update! Amazing rom , highly recommended especially with the updated kernel!
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
I think guide allready have on the jbx kernel thread
guruggk1988 said:
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Click to expand...
Click to collapse
i think you have already installed BMM.
then take mokee 4.4.2 for example,
1. download the latest version of dtrail's kernal, or Shurikkb's (because it is verified that his kernal have better battery life, you can find in dtrail's post)
2. flash it like a ROM, (boot to BMM recovery, switch to system3, then install package from ..., no wipe, no clean)
3. then enjoy, for details, please read in the post
help
PhoenixNghi said:
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
Click to expand...
Click to collapse
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
guruggk1988 said:
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
Click to expand...
Click to collapse
You did install it, right? So go to About and find Kernel version, you'll see JBX there
Issues with JBX 3.0
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
dguamache said:
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
Click to expand...
Click to collapse
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Hello_Motto said:
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Click to expand...
Click to collapse
i guess u better stick to shurikkb 25/2 build , its awesone , even i faced issues with the 27/2 dtrail like no signal , but shruikkb is marvelous:good:
guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
Just click next til end?
dguamache said:
Just click next til end?
Click to expand...
Click to collapse
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
guruggk1988 said:
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
Click to expand...
Click to collapse
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
dguamache said:
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
Click to expand...
Click to collapse
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I'll care.
guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
do you need to rename the custom kernel? the one ive got from git hub really boggled me a bit...Thx a bunch
Q&A for [KERNEL][ALPHA][LP 5.1]CyanogenMod 12.1 Kernel with DoubleTap2Wake
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][ALPHA][LP 5.1]CyanogenMod 12.1 Kernel with DoubleTap2Wake. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloop after flashing. Help!
Need some help. I have installed this kernel on CM 12.1 Rohan's build and got bootloop... Some info: I used Philz Touch 6 Fota and wiped cache and dalvic after flash. I recovered from soft brick through but what should I do to avoid bootloop?
File
Sorry for the dumb question but what is zip dl-0? cant flash it, it wont detect it.
Good day. First off, i wanted to say that i've tried this kernel and the d2w is very helpful for preserving the hw power button and i think this kernel is very useful.
The thing is, since their latest releases, i've found that Glade Rom and SlimLP have been the roms that are best for me in terms of what i need and my daily usage. Unfortunately, this kernel doesn't work for either of them. I'm guessing it's because of their base?
Anyway, i'd like to ask if the dev has any plans to get this kernel working for either of those roms or for aosp 5.1.1 roms in general? If yes, that would be awesome. If not, then i still say this kernel's features are still very helpful and i'll be waiting to get a cm-based rom that works for my needs. ?
cascabel said:
Good day. First off, i wanted to say that i've tried this kernel and the d2w is very helpful for preserving the hw power button and i think this kernel is very useful.
The thing is, since their latest releases, i've found that Glade Rom and SlimLP have been the roms that are best for me in terms of what i need and my daily usage. Unfortunately, this kernel doesn't work for either of them. I'm guessing it's because of their base?
Anyway, i'd like to ask if the dev has any plans to get this kernel working for either of those roms or for aosp 5.1.1 roms in general? If yes, that would be awesome. If not, then i still say this kernel's features are still very helpful and i'll be waiting to get a cm-based rom that works for my needs. ?
Click to expand...
Click to collapse
Doesn't work in the sense?
I have plans to bring this to every LP based ROM for XL.
I guess there might be some kernel related change. I will see to it.
corphish said:
Doesn't work in the sense?
I have plans to bring this to every LP based ROM for XL.
I guess there might be some kernel related change. I will see to it.
Click to expand...
Click to collapse
bootloops. even through a clean install or flashing it after an install and clearing dalvik and cache...
i've noticed that the roms that doesn't work with tz 4.15 won't work with this kernel either.
great to hear your plans. really appreciate it.
edit:
both these roms are aosp based and have RRO supported as opposed to cm theme engine. could that have any bearing on it? let me know how i can help.
Problem on my HTC One (M7)
Hello,
first of all I would like to apologize for my English problems. I installed your Kernel on my HTC ONE M7. It is running on Cyanogenmod 12.1 (Android 5.1.1). The problem is that my handy freezes everytime it tries to boot. It freezes on the HTC logo to be more specific. Please let me know if you need to know more details or need even a log and I hope this issue gets solved.
Thank you
usb619 said:
Hello,
first of all I would like to apologize for my English problems. I installed your Kernel on my HTC ONE M7. It is running on Cyanogenmod 12.1 (Android 5.1.1). The problem is that my handy freezes everytime it tries to boot. It freezes on the HTC logo to be more specific. Please let me know if you need to know more details or need even a log and I hope this issue gets solved.
Thank you
Click to expand...
Click to collapse
LOL No, this kernel is not meant for HTC One.
This kernel is only for Sony Xperia L. Please read the full post before trying anything.
Now how to recover? If you are able to go in recovery, flash CM12 or any custom ROM.
Master Solution is flashing stock as always, although I dont know how things are done for HTC [emoji14]
@corphish i kniw i shouldn't but.. If it's possible, may i ask that you add the Intelliactive scheduler if you can? Lulzactive and on demand doesn't really work for me (lulzactive seemed buggy last time i tried it - main core stayed on max freq). Just a request. ?
Wifi stopped working after I flashed this kernel. Previously I was on Tz 4.16. Any ideas what I can do fix this, other than going back to Tz?
primemonitor said:
Wifi stopped working after I flashed this kernel. Previously I was on Tz 4.16. Any ideas what I can do fix this, other than going back to Tz?
Click to expand...
Click to collapse
Well, you cannot go back to TZ now. It flashes kernel in boot-device linked partition, which is a mystery partition about which only Varun knows.
I haven't succeeded in your situation.
Sent from my C2104 using Tapatalk
corphish said:
Well, you cannot go back to TZ now. It flashes kernel in boot-device linked partition, which is a mystery partition about which only Varun knows.
I haven't succeeded in your situation.
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Right, learned that the hard way
Is this a known issue though, or something that you or others have previously faced, that changing from Tz to Zapdos will break wifi? Just curious.
Hey man, I use Primexperia rom, it's CM12 based, soon to be posted new ver CM12.1 based. For some reasons it's not compatible with TZ 4.16, 4.14 only (wi fi missing on 4.16) Will this kernel work for me? The only thing I really need is a stable system with Sony sound
Oh almost forgot, I use TWRP and I think that any other recovery is a waste of time, to be honest. Can I use TWRP?
illague said:
Hey man, I use Primexperia rom, it's CM12 based, soon to be posted new ver CM12.1 based. For some reasons it's not compatible with TZ 4.16, 4.14 only (wi fi missing on 4.16) Will this kernel work for me? The only thing I really need is a stable system with Sony sound
Oh almost forgot, I use TWRP and I think that any other recovery is a waste of time, to be honest. Can I use TWRP?
Click to expand...
Click to collapse
I tried, breaks network .
Sent from my C2104 using Tapatalk
corphish said:
I tried, breaks network .
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Stryder modded the rom while he had TZ installed ... I dont get why but thats it... Flash TZ4.15 and then TZ4.16
Sent from my Xperia T using XDA Free mobile app
Stryflex LP 1.5 Rom
Hi,
I am using Stryflex LP 1.5 Rom.
When used the its kernel,phone freezes randomly & hangs & not responds.
We have to take out battery & restart phone.
Most of the times even if i take out from pocket also it is in DeadState(even if pressed power button alos nothing works.)
So i installed Thunderzap 4.16 ,it is not freezing but Wifi is not working.
Then i shifted to your kernel, thank god it is not at all freezing while operating .
But i noticed that it is going to black screen/Dead State very frequently.
Waiting for any suggestions & help.
I appreciate your help & time.
Could we get 1.7~ OC like in TZ kernel? It was fully stable for me even with thermal throttling disabled.
Maybe it's noob but would the wake up signatures Hurt the touchscreen some how.
I mean it well make it work for 24 hour????
Tz 4.16 with cm 12 work properly and Wi-Fi is goog and with application tenderzap control you can Cheng setting so good and you can change control charge to 2100 ma for faster charging so download tanderzap control.apk
Sent from my C2105 using Tapatalk
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
After installing rom should install tanderzap.zip with via recovery for resolve Wi-Fi problem
Sent from my C2105 using Tapatalk
Hi everyone!
My display has started to show a circle of washed-out colours on the edges and I don't know why. It has all started when I unlocked the bootloader and changed the stock rom with the sultanxda's rom. The problem persist with other rom's, not only his one, and I wanted to ask you if it is a problem tha I can fix myself or it is possible call the assistance and ask for a new opo.
this is a video mad by myself to explain better my problem
watch?v=F6O5yi3X68g
(put it on the end of youtube video. sorry the xda rules don't give me the permission to post the entire link because it's my first thread)
thank you for your attention and patience
regards
is it a new opo ,, did u purchase after oct 2015 ?
thepico said:
is it a new opo ,, did u purchase after oct 2015 ?
Click to expand...
Click to collapse
yes! it's a replacement after my first opo with touch screen problems
davilomb said:
yes! it's a replacement after my first opo with touch screen problems
Click to expand...
Click to collapse
well then your opo like many of us has the LG display casuing issues with roms based on sultans kernels ! do one thing . flash sultan and then lightning kernel by nikhil18 and get back to me if it solved the issue
or u can just install anyother rom like team exodus or something.. some rom which doesnt use sultans kernel sources
thepico said:
well then your opo like many of us has the LG display casuing issues with roms based on sultans kernels ! do one thing . flash sultan and then lightning kernel by nikhil18 and get back to me if it solved the issue
or u can just install anyother rom like team exodus or something.. some rom which doesnt use sultans kernel sources
Click to expand...
Click to collapse
are you sure it's consigliated to flash a thirty part firmware? because sultan in the first post suggest not to flash other firmwares
thepico said:
well then your opo like many of us has the LG display casuing issues with roms based on sultans kernels ! do one thing . flash sultan and then lightning kernel by nikhil18 and get back to me if it solved the issue
or u can just install anyother rom like team exodus or something.. some rom which doesnt use sultans kernel sources
Click to expand...
Click to collapse
davilomb said:
are you sure it's consigliated to flash a thirty part firmware? because sultan in the first post suggest not to flash other firmwares
Click to expand...
Click to collapse
yes fyi : a kernel not a firmware .. both are different things ! he has told not to flash because of other bugs which might come because of not using his kernel ! he only tested his kernel and suggests that ! but this causes problems with new opos ! so flash sultan and lightning kernel or flash some other rom if you dont want to flash lightning kernel
thepico said:
yes fyi : a kernel not a firmware .. both are different things ! he has told not to flash because of other bugs which might come because of not using his kernel ! he only tested his kernel and suggests that ! but this causes problems with new opos ! so flash sultan and lightning kernel or flash some other rom if you dont want to flash lightning kernel
Click to expand...
Click to collapse
sorry dude, you have right! my bad!
I'll try to follow your instruction the soon as possible and i'll referr you if the problem has fixed.
thank you!