Hi,
I managed to install Android on my HTC Polaris using HaRET. Everythings works fine (GSM, WLAN, GPS, Bluetooth) except mobile internet via GPRS, EGDE or UMTS. I updated the radio to the latest version I could find for my Polaris (1.65.38.14). I even called my mobile carrier (O2 Germany) to get the correct APN settings. With WM the connection via UMTS works perfectly.
Any ideas what goes wrong? If I would be able to solve this problem, I would abandon WM and flash Android on my phone.
I tried Android 2.1 and 2.1, but the problem remains.
Here are the details of my setup:
Device: O2 xda Orbit 2, i.e. HTC Polaris 200
Android: 2.2
Kernel: 2.6.25-01130-g99a3b07-dirty bell(at)bell-laptop #383
Build:eu_vogue-userdebug 2.2 FR91 eng. martin.20100711.172453 test-keys
Thanks for any help,
Ralf
you can try following to activate mobile inet connection:
- put your phone into airplane on - airplane off
- (re)enter your apn via settings - wireless&network - mobilenetworks - access point names - press menu to enter new apn(s) or reset to defaults.
- force connection using modem.apk (connect/disconnect)
- reinstall/install another build, leave data
- install togga (toggle data connect), put on your sdcard and install via file manager
- use another zImage
- use stock radio
HTH
rhaller said:
Hi,
I managed to install Android on my HTC Polaris using HaRET. Everythings works fine (GSM, WLAN, GPS, Bluetooth) except mobile internet via GPRS, EGDE or UMTS. I updated the radio to the latest version I could find for my Polaris (1.65.38.14). I even called my mobile carrier (O2 Germany) to get the correct APN settings. With WM the connection via UMTS works perfectly.
Any ideas what goes wrong? If I would be able to solve this problem, I would abandon WM and flash Android on my phone.
I tried Android 2.1 and 2.1, but the problem remains.
Here are the details of my setup:
Device: O2 xda Orbit 2, i.e. HTC Polaris 200
Android: 2.2
Kernel: 2.6.25-01130-g99a3b07-dirty bell(at)bell-laptop #383
Build:eu_vogue-userdebug 2.2 FR91 eng. martin.20100711.172453 test-keys
Thanks for any help,
Ralf
Click to expand...
Click to collapse
Have you put the MMC and MNC values for the APN correctly? I had that problem.
Hello,
as posted in another answer, none of warm donut, eclair and froyo was able to get my XDA2(Pola200) online by 3G due booting from haret.
Also none of the tricks given above and in another posts and wikis(i tried everything, believe me)had done the trick.
After flashing it on NAND (Kallt_kaffes eclair RLS7c with latest available eclair kernel), 3G was starting out of the box after boot, w/o further configurations. Curiously with an apn entry from O2. I use a prepaid provider which is based on the O2 network but it has another apn name.
Better be careful, maybe it will be an expensive experience, to go online with the wrong apn entry - in my case it wasn`t.
Anyway, dont`t know what`s the difference relatet to the hardware of my device between Haret and NAND boot and not/working modem.
Matthias
hi matthias,
i have a very similar problem here in austria, using Yesss (which is using the Orange network). i can't get any data connection with froyo build. so i switched back to eclair (VaniljEclair_RLS7c) and 3g connection works out of the box - curiously with an apn from orange.
no idea what is wrong with froyo?
i'm using polaris 200 (xda orbit 2) with haret boot.
Hi, i live in the Netherlands. Is there anyone in the Netherlands how has the Zenithink ZT-180 working with the vodafone USB 3g Stick? ( k3765 )
I read in forums that this combination must work, i disabled cd CD rom function of the stick and filled in the APN information. But it doesn't work.
Help me!
Wich version of firmware do u have?
i have latest 0425 but where i configure APN?
Problem solved...
problem solved...works the internet.
disabled cd CD rom function
disable pin
wcdma
when boot go to apn section
write your isp data
Hi Guys,
I flashed InDroid Rom v5 and I cant connect to the internet (with update 5.1 and 5.2 doesnt work as well).
Do you have any ideas what I should do with this?
First of all post this in our threads in dev/general section - g3 for better help
Getting to your issue
Is the apn properly set?
Settings > wireless and networks > mobile networks > access point names
And after setting the correct apn enable data and reboot if you want to - will solve ur prob
Dear sir,
I had recently successfully build the latest source code with build id NMF26Q and flashed into Google pixel device , but i am unable to get mobile data connectivity. I had checked the APN and other settings , everything seems to be perfect still mobile data connection not working. I am able to get mobile signal network and able to call and send sms too, but no internet. So please kindly provide any solution or whether i had missed out any build property during build or any sepolicy where i need to target for enabling mobile data
Please provide me solution earliest possible
Thank you
Vamsi Donkada
from
India
there is no access to the APN settings on the lg v50 thanq 5g phone. Help open access or give the path to the APN settings file itself