I am just wondering if it is possible to get the CM Voice+ app on stock. I saw in a thread that it had to have a change in some middleware setting for pushSMS, but since the post was from half a year ago, I thought it might be possible now. TIA
dakoellis said:
I am just wondering if it is possible to get the CM Voice+ app on stock. I saw in a thread that it had to have a change in some middleware setting for pushSMS, but since the post was from half a year ago, I thought it might be possible now. TIA
Click to expand...
Click to collapse
I'd also like to know this, if anyone knows.
I haven't used CM since I found out about Xposed Framework and Gravity Box. I don't want to flash CM just to try an app that never worked for me in the past to see if it works now.
dakoellis said:
I am just wondering if it is possible to get the CM Voice+ app on stock. I saw in a thread that it had to have a change in some middleware setting for pushSMS, but since the post was from half a year ago, I thought it might be possible now. TIA
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2598889
Related
My camera does not start up. goes to a black screen and then back to my home screen.
Any ideas on the cause of this? I am running the leaked gingerbread OTA
It just started doing this been running the leaked OTA for a week with no problems
Don't Thank me.. Thank mzimand
FIX:
1. Go to Settings and select Date & Time.
2. Un check Automatic
3. Change the time to 08-01-11
4. Go and open your camera (it should work now)
5. Now you can go back and check Automatic in the Time & Date Setting
edit:
works
try it again.. it worked for me and a buddy.. you need to to change the date on your phone to august 1st. then try using the camera a couple of times..
once it works, just click it back to automatic for your date and time
atlmatt said:
that did not work
i tried another camera app and it said it could not connect to camera
I tried a phone reset and the same problem
also getting a application foceclose google.talk. or something like that
Click to expand...
Click to collapse
Try the date change again. Leave it for five. Open the camera and it should work. I tried my camera and it did not work then tried the camcorder and that worked then back to the camera and that worked. Then set date back to auto.
What causes this? Is it preventable?
I loaded the leaked GB on both mine and a friends phone same time and I am the only on that has gotten the issue, or is it with the phone?
awesome, worked great. had to try it a coupe of times.
ilikebikes said:
awesome, worked great. had to try it a coupe of times.
Click to expand...
Click to collapse
This is an issue that came up last night across many custom ROMs and stock GB RUUs. This LINK is a download for a flashable .zip that will fix the problem permanently.
The link provided may be credited to this post, as well as mpwt51 on the Android Central Forums and Snow02 on the BAMF Forums. I will also post a link in my q AND a stickied at the top of the QandA forum.
what the hell would cause something like this anyways?
fixxxer2008 said:
what the hell would cause something like this anyways?
Click to expand...
Click to collapse
Adrynalyne knows....
loonatik78 said:
Adrynalyne knows....
Click to expand...
Click to collapse
is it the new leak?
fixxxer2008 said:
is it the new leak?
Click to expand...
Click to collapse
No. It was affecting any ROM using the gapps with Gtalk video. Some weirdness to do with a file that uses camera mainly, but also tied into Gtalk's video feature. The fix is actually for the camera, but it gets gtalk going again.
HTC timebombed a lib used by the camera and it expired 8/31. It was probably an accident and not malicious in nature. The lib (and several camera libs) were dated back from May. Even the 2.01 alpha had newer camera libs.
As you folks have already noticed, 2.11.605.0 will NOT be the final release version, LOL.
Can any one come up with a permanent fix for the camera, because it seems to reset when the phone is powered on?
Sent from my ADR6400L using xda premium
This would have explained why Uberbamf wouldn't let me use the camera then. Thx for posting the fix.
Yesterday, my gtalk app stopped working, my camera stopped working, now my phone is going crazy. Im on uber bamf and its just crazy. re-flashing isnt working or anything.
I had this problem after flashing a custom lockring. So I formatted and restored nandriod and still had the same problem. My issue was gtalk instantly fc at startup, didn't even notice the camera didn't work until I read up on this problem. I blamed it on the new cwm update that just hit yesterday because some people were having issues with it too. But apparently that wasn't the case.
Sent from my ADR6400L using Tapatalk
was there some sort of app change or auto update?
I posted a link to the camera.zip file on my thread. There's a link in my sig to get there. It's at the top under "Notice:"
So it came to my attention yesterday that I had like 20 VMs', wich I had no idea because I am apparently not receiving notifications. I've checked all settings, and have not changed anything in like 6 months. Yes, I have looked, checked and read any applicable forums. I'm running just barebone stock GB. It may be antiquated, but I like it, it works well and gets great battery life. No problems ever till now. Any suggestions? Thinking I may have to One-Click back, start over and see, but was just wondering if anybody has any thoughts. Hope this post was respectful enough for all!
Did you perhaps remove the visual voicemail apk. I understood it as being needed to get notifications. (Correct me if I'm wrong).
champ1919 said:
Did you perhaps remove the visual voicemail apk. I understood it as being needed to get notifications. (Correct me if I'm wrong).
Click to expand...
Click to collapse
Yep I did, and do believe that's the problem. Anybody know how I can get that apk back. I grabbed it from Lumin's APK repository but its a .zip and upon flashing it fails....of course. Knew it couldn't be that easy. If not I'll one-click it and start over. Thanks much. I appreciate the answer.
Just install it from the Play Store
https://play.google.com/store/apps/details?id=com.tmobile.vvm.application
FBis251 said:
Just install it from the Play Store
https://play.google.com/store/apps/details?id=com.tmobile.vvm.application
Click to expand...
Click to collapse
Thanks FB.....Been looking, couldn't find it. All is well again. Thanks button pushed and thread can be closed
CSP III said:
Thanks FB.....Been looking, couldn't find it. All is well again. Thanks button pushed and thread can be closed
Click to expand...
Click to collapse
No problem, just make sure you add [SOLVED] to the thread title
Is it possible to load stock android on the htc one m8? If not will it be possible in the future?
Thanks
timothyl88 said:
Is it possible to load stock android on the htc one m8? If not will it be possible in the future?
Thanks
Click to expand...
Click to collapse
In the future it will be possible.
It would be quicker to post a sticky about the things we currently cannot do with the M8.
Thanks for the responses. I like the phone but hate all the extra crap they put on it. I want it to be stock so I can decide what to install.
Not in the near future... A lot needs to happen to make this possible
Sent from my Galaxy Nexus using Tapatalk
Like a month or 6?
timothyl88 said:
Like a month or 6?
Click to expand...
Click to collapse
As long as it takes, there's no real way to say.
timothyl88 said:
Like a month or 6?
Click to expand...
Click to collapse
There is no timeline to be put on this. It will happen as soon as a way is found. the M7 was released end of August, and S-OFF wasn't achieved until right around October. It may be soon, it may take months. Its up to how well the community supports the dev's along with a bit of luck.
Does anyone know if there is a way to make just the soft keys appear like stock/nexus keys, softkeyz currently is not compatible but does gravity box or any app out there work for what I'm trying to do any help would be really appreciated.
JNava420 said:
Does anyone know if there is a way to make just the soft keys appear like stock/nexus keys, softkeyz currently is not compatible but does gravity box or any app out there work for what I'm trying to do any help would be really appreciated.
Click to expand...
Click to collapse
Not yet
I have been trying for two days to get the Google dialer to work on my Galaxy S3 running 4.4.2 rooted with towelroot. Tried everything I know except for flashing the zip because I don't yet have a custom recovery. Any help would b appreciated. My guess is that it's conflicting with touchwiz.
Bumping for lack of a decent answer anywhere else
carlofabyss said:
Bumping for lack of a decent answer anywhere else
Click to expand...
Click to collapse
Guessing ur having trouble too?
ATGkompressor said:
Guessing ur having trouble too?
Click to expand...
Click to collapse
Sorry about my delay. Yepppp cant seem to get it to work, im guessing it's to do with the samsung framework. Ive gotten to a point where I can get it to launch but contacts wont show and calling will cause the app to crash despite also including the callui and callprovider apks. Forgive me if my description is a little inaccurate as im not looking at my phone at the moment
Found the answer: http://forum.xda-developers.com/showthread.php?t=2542081
Many of you know exactly what "oversharpening" is... for those who not, just google "g3 oversharpening" or check this article.
After hours spent trying almost everything i finally managed to remove that. Check in the 2nd thread to see the difference.
Here you go... just flash the kernel in recovery but remember to make a backup of the boot partition before, just in case it will not works.
Remember... the only weird thing is that you have to turn off the screen and then on again to make it works. Just the 1st time after the boot.
DOWNLOADS:
D855 Kitkat Lollipop
D851 Kitkat
D850 Kitkat
LS990 Kitkat
F400 Kitkat
VS985 Kitkat
D852 Kitkat
...i'm currently building for all the variants
Of course, tell me what you think.
Like always... DONATIONS are wellcome!!!
Lollipop Source
Kitkat Source
tnx to @Tectas for the kernel source
I'll be giving this a run later. Want to elaborate on exactly what the issue was and the fix ?
2SHAYNEZ
I have down loaded and applied seems to work fine will run some more testing later... It does cause the phone to "hang" at the LG Splash screen for a few moments longer then normal. Just a heads up for other people that flash this.
:good:
I posted in the original G3 Development thread but also posting here to say, yes it does work. I was one who noticed and didn't like the effect. May be unnecessary for some but those who had complained about the sharpening will definitely appreciate this.
shayneflashindaily said:
I'll be giving this a run later. Want to elaborate on exactly what the issue was and the fix ?
2SHAYNEZ
Click to expand...
Click to collapse
Check the commit on my source... If you cant understand i will explain better i can
YES!!! Thank you!!!
I applied this patch using another method. I grabbed my current boot.img, opened with a hex editor and replaced 16 occurrences of 39010000000004F2010040 with 39010000000004F2010000. Wrote the image back, rebooted and... Ahhh, no more halo, no more ghosts, no more fuzziness. Nothing but crystal clear text!
shimbob said:
YES!!! Thank you!!!
I applied this patch using another method. I grabbed my current boot.img, opened with a hex editor and replaced 16 occurrences of 39010000000004F2010040 with 39010000000004F2010000. Wrote the image back, rebooted and... Ahhh, no more halo, no more ghosts, no more fuzziness. Nothing but crystal clear text!
Click to expand...
Click to collapse
Can anyone verify this? Will this method work on the cm12 kernel?
I'm not sure I see a difference .. My eyes are probably just used to the display.
2SHAYNEZ
Can I use this on the cm12 rom? The sharpening really kills the device for me.
Shigga pls read the title of the thread
shigga said:
Can I use this on the cm12 rom? The sharpening really kills the device for me.
Click to expand...
Click to collapse
I'm pretty sure these kernels ate stock only ... Correct me if I'm wrong op
2SHAYNEZ
This definitely has gotten rid of the over-sharpening so excellent job in that respect. I've had two random hot boots so far since I flashed this and also noticed that the phone hangs at the LG boot screen for about 30 seconds before the LED starts cycling through the colors and the AT&T splash screen comes up after shutting off the phone. Any ideas on either?
Sent from my LG-D850 using Tapatalk
Downgrading from the ota update to test this! I'll love the phone if this does indeed work.
And it works +1. I love you main.
Donation will be coming. You just made this nearly the perfect phone for me.
Waiting for cm12 support. Hopefully soon
Sent from my LG-D850 using Tapatalk
jriv said:
Waiting for cm12 support. Hopefully soon
Sent from my LG-D850 using Tapatalk
Click to expand...
Click to collapse
http://review.cyanogenmod.org/#/q/g3,n,z
They're going to merge a oversharppening fix soon.
Sent from my LG-D850 using XDA Free mobile app
confirmed working
thanks
I wonder if the last OTA fixed this. I honestly haven't noticed anything like the article showed.
scorpiopantera said:
I wonder if the last OTA fixed this. I honestly haven't noticed anything like the article showed.
Click to expand...
Click to collapse
I didn't notice it at all until a couple if weeks ago when I was reading a text document with Firefox. I just thought it was a Firefox issue,I was wrong!
mrcgp said:
I didn't notice it at all until a couple if weeks ago when I was reading a text document with Firefox. I just thought it was a Firefox issue,I was wrong!
Click to expand...
Click to collapse
Not even 5 minutes after posting this... I pulled up a website with a black background and white text... Saw this issue.
scorpiopantera said:
Not even 5 minutes after posting this... I pulled up a website with a black background and white text... Saw this issue.
Click to expand...
Click to collapse
pulling up websites with a black text/white background and hitting the url bar was the easiest way to reproduce for me. This forced the background to go grey and every letter on the page would show the white halos from the oversharpening.