Related
I never had a problem with anything until I flashed beans build 6. I did a clean install but ever since my phone has been freezing nonstop. I have to battery pull every time and it is getting frustrating. I went back to build 5 on a clean install and the same thing occurs. I even tried downloading my apps one by one from the play store instead of restoring from titanium and I still get this issue. Someone please give me some enlightenment I'm desperate!
Sent from my SCH-I535 using xda app-developers app
1) What does a full wipe consist of in your case?
2) Freezing as in you can't do anything at all or freezing as in laggy? How long did you have Beans Build 5 and/or 6 installed?
3) did you have the AOSP Lockscreen installed via Aroma (when you first flash the rom)? if so, did you deselect ALL the TW options under Settings/Lockscreen?
4) Do you check the md5 before flashing build 5 or build 6? If not, what do they say when you check now?
AOSP lock screen was the culprit that required me to pull my battery. I have no problems with the tw lock screen on B6. Battery life, GPS, performance is great on B6.
Sent from my SCH-I535 using xda app-developers app
When you enable AOSP lock screen you must disable all other functions in the same settings menu. Everything must be off. I'm running it flawlessly after doing so.
Sent from my SCH-I535 using xda premium
This is what I mean.
Sent from my SCH-I535 using xda premium
SlimSnoopOS said:
1) What does a full wipe consist of in your case?
2) Freezing as in you can't do anything at all or freezing as in laggy? How long did you have Beans Build 5 and/or 6 installed?
3) did you have the AOSP Lockscreen installed via Aroma (when you first flash the rom)? if so, did you deselect ALL the TW options under Settings/Lockscreen?
4) Do you check the md5 before flashing build 5 or build 6? If not, what do they say when you check now?
Click to expand...
Click to collapse
Full wipe for me would be factory reset/system/cache/dalvic
It would freeze and I wouldn't be able to do anything so I had to battery pull
I had some settings turned on for touch wiz lock screen and I've turned them off since and I think that may have been the culprit. They were there as default however.
Also how would I go about checking md5
Sent from my SCH-I535 using xda app-developers app
Real_JESRadio said:
This is what I mean.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Yeah did that still happening :/
Sent from my SCH-I535 using xda app-developers app
cvbcbcmv said:
When in doubt, restore to stock and do the rooting process again. Try backing up your SD, wiping it, and putting it back on too. Basically do some spring cleaning, you're phone's getting dusty! (I'm joking because these will probably work)
Click to expand...
Click to collapse
How big of a pain is it going back to stock?
Sent from my SCH-I535 using xda app-developers app
It's easier than dealing with all of your issues.
Sent from my SCH-I535 using xda app-developers app
jlibis said:
Also how would I go about checking md5
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
There are numerous methods:
forum.xda-developers.com/showthread.php?t=1135620
Sent from my SCH-I535 using xda app-developers app
bobAbooE said:
It's easier than dealing with all of your issues.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Typical XDA post....nice contribution
Sent from my SCH-I535 using xda app-developers app
cvbcbcmv said:
When in doubt, restore to stock and do the rooting process again. Try backing up your SD, wiping it, and putting it back on too. Basically do some spring cleaning, you're phone's getting dusty! (I'm joking because these will probably work)
Click to expand...
Click to collapse
That's exactly what I did. Then switched to TW 4x5 launcher and also changed to CWM recovery (before re flashing ROM) and all my issues went away. Don't know if Nova was the issue or not but it works great now. Fast and smooth. Even running IMO lean kernel with no problems. Here's the quadrant score.
Sent from my SCH-I535 using xda premium
jlibis said:
Typical XDA post....nice contribution
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Are you still having issues?
Sent from my SCH-I535 using xda app-developers app
Didn't realize Quadrant was so frowned upon around here. Sorry for posting. Have used other benchmarks and with B6 have achieved scores very close to the supposed reigning benchmark king that I will not mention lol. Either way, I'm very happy with the speed and smoothness of B6 now. Once B7 corrects the email issue and I'm assuming will be based on the official OTA release tomorrow I think I've found my daily driver. Great ROM.
Sent from my SCH-I535 using xda premium
Real_JESRadio said:
Once B7 corrects the email issue and I'm assuming will be based on the official OTA release tomorrow I think I've found my daily driver. Great ROM.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Build 6 is already based on the Verizon OTA coming out tomorrow.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
Build 6 is already based on the Verizon OTA coming out tomorrow.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
True. Unless there were a couple of final tweaks. Either way this is a great ROM.
Sent from my SCH-I535 using xda premium
bobAbooE said:
Are you still having issues?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Ran b5 today no issues....quite weird not sure I just hope I don't have to go back to stock. I got great battery life today around 20 hours with 3 on screen and 20 percent left. No freezing either I'm quite confused but not holding my breath
Sent from my SCH-I535 using xda app-developers app
Real_JESRadio said:
That's exactly what I did. Then switched to TW 4x5 launcher and also changed to CWM recovery (before re flashing ROM) and all my issues went away. Don't know if Nova was the issue or not but it works great now. Fast and smooth. Even running IMO lean kernel with no problems. Here's the quadrant score.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I was using cwm and switched to twrp actually and I think that may have helped... There is no telling though. I would go back to cm10 but I have constant call issues with it even with late builds. Probably my phone being temperamental though. I am one that believes in doing clean installs though so I know my problems aren't from a so called dirty flash. I wish I could import my desktop layout into trebuchet because I always feel that it was the fasted launcher for me.
Sent from my SCH-I535 using xda app-developers app
jlibis said:
I was using cwm and switched to twrp actually and I think that may have helped... There is no telling though. I would go back to cm10 but I have constant call issues with it even with late builds. Probably my phone being temperamental though. I am one that believes in doing clean installs though so I know my problems aren't from a so called dirty flash. I wish I could import my desktop layout into trebuchet because I always feel that it was the fasted launcher for me.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I don't know. Weird. I did flash another ROM between 5 and 6. That may have started my issues. Hoping Eclipse updates And gets 4.2 along with Google now. If so, I'll go back to that. Only non TW ROM I liked. Very fast and no issues with Eclipse 2.1 build 4.
Sent from my SCH-I535 using Tapatalk 2
Real_JESRadio said:
I don't know. Weird. I did flash another ROM between 5 and 6. That may have started my issues. Hoping Eclipse updates And gets 4.2 along with Google now. If so, I'll go back to that. Only non TW ROM I liked. Very fast and no issues with Eclipse 2.1 build 4.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I've flashed almost every ROM available and I always find that builds that are built off cm10 with more customizable options always give me issues for some reason. I was s strong believer in cm10 until I tried out beans with the new aosp options.
Sent from my SCH-I535 using xda app-developers app
I'm trying to root my s3 and the goal is in the end to put cm on it. I'm bummed the installer doesn't work for our phone, but is there a good guide on here or elsewhere with the files I'll end and a how to?
Thanks in advance ( FYI, I've flashed and rooted multiple times before just never cm)
If you stop by Google and go to CyanogenMod's page, find the phone in the devices section. There are device specific guides there. If you want to try something else, go to the original development section, find the CyanogenMod ROM and follow the directions there.
Sent from my SCH-I535 using XDA Premium 4 mobile app
I've found the site but I'm not too familiar with some of the steps needed. I've re rooted my device, I know now I need to unlock my bootloader. There used to be an app on the play store for this, is still there and whats the name of it does anyone know?
Sent from my SCH-I535 using xda app-developers app
Never used an app but using an automated system like that without knowing how to do it the real way ends up crippling you for the long road of wonderful Android. Here is a link to a sticky that has your info:
http://forum.xda-developers.com/showthread.php?t=2295146
Sent from my SCH-I535 using XDA Premium 4 mobile app
Ok so I managed to unlock the bootloader and now I'm on the next steps..but it mentions something about adb. I've never messed around with it..
Sent from my SCH-I535 using xda app-developers app
JPull07 said:
Ok so I managed to unlock the bootloader and now I'm on the next steps..but it mentions something about adb. I've never messed around with it..
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Read the instructions here once rooted/unlocked
http://forum.xda-developers.com/showthread.php?t=2405425
Yeah, those didn't really help me...if I gave the file on my sd card should I be able to flash it from there with rom manager or goo manager?
Sent from my SCH-I535 using xda app-developers app
If you're rooted, and unlocked, do you have your nandroid backup set up with custom recovery? From there just use Goo Manager to boot into recovery, and then wipe your cache and then flash your ROM and appropriate Gapps pack. Process was fairly simple on my SIII using TWRP. Make sure you look up the appropriate Gapps zip before starting or you will wind up with key features inoperable and will have to reboot and load it onto your phone before finishing setup.
You'll like CM 10.1.x on the SIII, it runs very smoothly.
Nothing in the post I linked mentions Rom manager. The instructions work if followed.
Don't forget to do this either. Just in case. I've never had to restore, but i still have A & B covered
http://forum.xda-developers.com/showthread.php?t=1852255
Sent from my SCH-I535 using xda app-developers app
Is it bad to flash a rom with less then 100% Battery
Sent from my SCH-I535 using xda app-developers app
JPull07 said:
Is it bad to flash a rom with less then 100% Battery
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Not necessarily. I think I flashed my SIII with about 85%. Then again, I did most of the steps with it plugged into the charger EXCEPT for flashing the rom itself. It took about four or five minutes tops.
Has anyone tried both cm and slimbean? I'm thinking of trying slimbean first bc I have usee cm in the past but I keep reading slimbean is stable and gives great battery.
Sent from my SCH-I535 using xda app-developers app
Alright this is confusing.I have the files but I can't find them when I go to look on my sd card..is there a certain folder tbey should be in (stock browser)
Sent from my SCH-I535 using xda app-developers app
My gs4 just installed it
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
alfmetal said:
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Got the same thing just 5 minutes ago.. installed it.. anybody have a changelog?
Here's the full changelog from Samsung's site:
Android 4.3 OS upgrade
Samsung Galaxy Gear compatibility
Group Play 2.5
Samsung Apps
Knox
Drag and drop to uninstall or disable applications
Call reliability improvements
The new update is build number 1337UCUEMK2 – the last one was 1337UCUEMJ9. So Samsung had to change something, but the very short turnaround time indicates it wasn't anything major (some users reported keyboard issues on MJ9). The update is pretty hefty at 719MB if you're coming from the Android 4.2 software. There is also a patch from MJ9 to MK2 for people who got the last OTA that clocks in at just 28.07MB. Begin hammering the update button – no promises, though.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Any way to keep root and safestrap?
Wow! This is so new! It's not like it hasn't been discussed for days already!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Those of us on MF3 who rooted cannot accept the OTA correct? WE would have to unroot first?
I can say this. It was no ordinary update even though coming from the mj9 one it was only 28.07mb's. It did something to the phone to finally take away the lag. I think Samsung finally got the phone working right. I'm pretty happy with my s4 now.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
So I came from an rooted MF3 install, but I have done a factory reset to try and get the update. Even now, I can't seem to get a response from hitting the "Software Update" button. Does anyone have any suggestions? Confused as to why I can't get it to report to me...
You need to use this thread for 4.3
http://forum.xda-developers.com/showthread.php?t=2498897
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Seriously... Another 4.3 thread
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
joe3681 said:
Seriously... Another 4.3 thread
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You don't expect people to actually read before they post do you? I mean, it's only common sense and the XDA rules. Why would most of these people do something smart like that? 90% of the threads are from people that either didn't or can't read.
lowspeed said:
Any way to keep root and safestrap?
Click to expand...
Click to collapse
I lost root , and I think safe strap only works with mf3 roms
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
CoNsPiRiSiZe said:
Those of us on MF3 who rooted cannot accept the OTA correct? WE would have to unroot first?
Click to expand...
Click to collapse
Or
You can side load the mj9 update and hit software update in settings.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
galaxyjeff said:
I can say this. It was no ordinary update even though coming from the mj9 one it was only 28.07mb's. It did something to the phone to finally take away the lag. I think Samsung finally got the phone working right. I'm pretty happy with my s4 now.
Me too. Even when I take a picture with the galaxy gear, they show almost instantly on my GS4 gallery.
Also, bluetooth is like "smart".
I was having problems connecting my cars bluetooth to my GS4 and at the same time to my gear and each device to know what I needed it for, and now they now somehow.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
root?
Can we root if we updated to 4.3 mk2?
I still keep getting software update interrupted, going to have to use other means to upgrade I guess.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
This new update seems to have fixed the messaging app, before it was all messed up on the first 4.3 update.
Also another thing that seems fixed is the developer options, I would turn off all animations but it wouldn't stick as they would turn back on on their own.
gokusayin said:
Can we root if we updated to 4.3 mk2?
Click to expand...
Click to collapse
As of today, nop
Sent from my Nexus 7 using xda app-developers app
msd24200 said:
I still keep getting software update interrupted, going to have to use other means to upgrade I guess.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
FYI I was onwifi when the update showed up
Sent from my Nexus 7 using xda app-developers app
I have just got my nexus 5 a day ago running stock rom stock kernel, rooted with clockworkmod in play and I'm trying to turn on ART, the system asks to reboot and when it does there is no upgrading process when the device boots, I in to dev options and it indicates it's still using David, I've tried this over and over again and nothing, anyone have a clue what I'm doing wrong?
Sent from my Nexus 5 using xda app-developers app
Hi,
Do you use Xposed framework and modules?
If yes it's normal because they are not compatible with ART, and makes revert to Dalvik runtime automatically.
If no, sorry I don't know...
I do use exposed, that's a real shame, what if I was to use a custom Rom like omni would it still revert back?
Sent from my Nexus 5 using xda app-developers app
ckavvouras said:
I do use exposed, that's a real shame, what if I was to use a custom Rom like omni would it still revert back?
Click to expand...
Click to collapse
So yes it's due to Xposed and you can't do anything until the devs will make it compatible...
No you can use ART with another rom but not with Xposed, whatever the rom with Xposed you can't use ART...
ckavvouras said:
I do use exposed, that's a real shame, what if I was to use a custom Rom like omni would it still revert back?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Well thanks for the help man been racking my brain all night trying to figure it out lol, think I leave art for now, exposed is just to sweet lol
Sent from my Nexus 5 using xda app-developers app
You have to read the Xposed thread before using it...I am really desperate for the X to be working correctly on ART qq...
Sent from my Nexus 5 using Tapatalk
Every time I reboot stock ROM Franco kernel with art I get one app that says optimizing. Is there anyway to figure out what that is
Sent from my Nexus 5 using xda app-developers app
imablackhat said:
Every time I reboot stock ROM Franco kernel with art I get one app that says optimizing. Is there anyway to figure out what that is
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Pretty sure you would need an adb logcat to clear up this mystery.
Is there an app I can get or must it be from a cpu
Sent from my Nexus 5 using xda app-developers app
imablackhat said:
Is there an app I can get or must it be from a cpu
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
you can logcat with an app, when the phone is booted up already. but to see a logcat while its booting, you need to do it via adb while connected to your computer.
Saw in a random N4 thread about ART that if you have apps that aren't ART compliant, then you will have that on every reboot. Haven't tested myself as I don't care about ART since Xposed is more important to me, but would make sense.