Related
Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Just adding somting as a requirement.
If you need to by pass the mouse with OTG stuff use mymobiler . com google it
gr8 helps thanks:fingers-crossed:
PS as External SD card is required to make it work
cwm problem
Pls help, I have rooted my P500. But unable to install CWM recovery. I tried both methods Novotools and cem5ics command prompt method.
Novotools installs cwm in my tab but when i reboot it it hangs at mmx logo.
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
thatsgamer said:
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
Click to expand...
Click to collapse
I am going to replace my tab today. I know the fix ! Just wait !
Thanks for your patience.
devanshkumar said:
Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Click to expand...
Click to collapse
Thanks to this post i was able to unbrick, however there are a few steps that i would like to add to make it more clear.
at Step 4: After pressing the power button ten times, you will see that a pop up comes tellinga new hardware found and will ask to locate the drivers, now click continue to automatically update the driver. it will fail and then an option to browse and locate the driver will pop up. Now browse to the folder where you extracted live suit pack and choose the USB driver folder to install the driver. Next it will come up with two pop ups press Yes both the times
Step 6 Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer
Step 7 is the same
Whilst putting the backup file on the tab create a clockworkmod folder in the root of the tab create another folder called backup and extract the backup file downloaded onto it.
It worked
All the steps work perfectly..I was able to unbrick the device with touch using first Livewire image .. Thanks a ton developer..
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
deadnight.warrior said:
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
Click to expand...
Click to collapse
It looks like there is an issue with CMW installation. Follow rooting and other steps all over. Restoring backup of 26 should be good enough
Sent from my HTC One X+ using xda app-developers app
bricked funbook
guys,
i installed custom rom from cwm names cyanbook based on jelly bean but when phone started it stucked on mi logo....i tried many times but nothing happened...so i downloaded livesuite from some site and stock rom as on that site...and flashed the same.....but now i can see only blank screen.... pls guys help me...........is there any way to install stock rom...
Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)
I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
@bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:
I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again
najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread
bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored
can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space
AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app
Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one
root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?
bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?
Hi Folks Hw Are Ya All? I'em Back Again With An Useful Thread!
This Thread Provides You Custom Recoveries For Most Of The Spreadtrum Devices!
I Know You All Must Be Hunting For CWM/TWRP Like I Did Once
First I Would Like To Thanks "ElectronikHeart" For Providing The CWM For Spreadtrum™ & Credits To @dev.shinchan For His TWRP For sc7731/8830
You Must Be ROOTED To Use This Method! Cant Root?? Read My Thread Here: http://is.gd/gCPTj9
Requirements:
1) A Working Spreadtrum Device
2) MobileUncle Tool
3) Custom Recovery
4) A Pair Of Hands & Eyes
5) The Biggest Requirement: A Normal Working Brain
Here Are All The Recoveries:
1) For S6280 : http://is.gd/0PJXs0
2) For i9270+ : http://is.gd/fiFug2
3) For 5830, S5830, Q5830, Q206 & GT-N9300 : http://is.gd/3xLzZx
4) For S9300 Clone : http://is.gd/4WqA2Y
5) For Fieteng A7100 (May Work On Most Feiteng Devices) : http://is.gd/TpaHuD
6) For 6500-TV & S560 : http://is.gd/On1wnT
7) For N9300 (I9300 Clone) : http://is.gd/vNt0EC
8) For S930 & N8820 : http://is.gd/2j2fzQ
9) TWRP For Most sc7731 & sc8830 Devices: https://drive.google.com/file/d/0B8vhq1nCgRGdR3VmbE1RSWNRSjA/view?usp=docslist_api
If Your Phone Is Not Listed, Then Try All Of Them! Anyone Will Certainly Work On Your Phone!
How To Flash It In Your Phone:
Step 1 : Download Recovery From Above!
Step 2 : Download & Install MobileUncle Tools From Here : http://is.gd/SzWnZg
Step 3 : Extract The Recovery Using Any Extractor (ES File Explorer)
Step 4 : Rename The File As 'recovery' Without Quotes.
Step 5 : Place It On Your SDCard (It Should Be On /sdcard i.e Not Inside Any Folder)
Step 6 : Open MobileUncle Tools '&' Tap On Recovery Update.
Step 7 : It Will Scan The Recovery On Your SD.
Step 8 : Tap On That Recovery & Let MobileUncle Flash It.
Step 9 : Bingo! You're Done!! It Will Ask To Boot In Recovery '&' Now You've A Custom Recovery.
If It Doesn't Work On Yours Then Try The Same Steps With A Different Recovery!!
-> How To Boot Into Recovery Mode??
Turn Off Phone, Take Out Battery, Put It Back! Hold Power+Volume Down Button For Few Seconds. You Will Be In Recovery. Hoever, It May Be Different For Your Device!
Caution: Skipping Any Step Can Brick Your Phone & You Must Be Rooted To Use This Method! Use At Your Own Risk & Enjoy..
Hi Ashish,
Will any of these work on yxtel g926 triple sim version? If not, can you pls upload one?
Reg,
Narayan
Here's the thread for 3 SIM Version:
[Stock 2.3.5] One~ROM | YXTEL G926 Triple SIM | China Phone | Deodex |
Hi there,
I tried all of them but none of them worked on my SP8810 spreadtrum device!
y2knarayan said:
Hi Ashish,
Will any of these work on yxtel g926 triple sim version? If not, can you pls upload one?
Reg,
Narayan
Click to expand...
Click to collapse
yes! Any one of them will work.. i tried it on dual-sim version though.. give it a try..
Sent from my H120 using XDA Premium 4 mobile app
cyberzone5 said:
Hi there,
I tried all of them but none of them worked on my SP8810 spreadtrum device!
Click to expand...
Click to collapse
Strange :/ it worked on my sp8810 (YXTEL G926)
Sent from my H120 using XDA Premium 4 mobile app
@thedevilashish
Maybe there's a typo on OP about SC6280 maybe that should be SC^*@) as zip is named? Thanks for providing this list! I was contemplating on building a new cwm but that's too hard for my little knowledge right now
Update 1: No. 4 works for my Kingwill P606 although screen is upside down and colors are incorrect and text is hard to read. But still, it works! Thanks!
Okay
btiu said:
@thedevilashish
Maybe there's a typo on OP about SC6280 maybe that should be SC^*@) as zip is named? Thanks for providing this list! I was contemplating on building a new cwm but that's too hard for my little knowledge right now
Update 1: No. 4 works for my Kingwill P606 although screen is upside down and colors are incorrect and text is hard to read. But still, it works! Thanks!
Click to expand...
Click to collapse
Good That No 4 Worked For. You.. Try Rest Of Them Maybe They Will Work Accurately For Ur Device..
Try this its fully working for yxtel g series
http://forum.xda-developers.com/showthread.php?t=2674445
thedevilashish said:
Hi Folks Hw Are Ya All? I'em Back Again With An Useful Thread!
.
.
This Thread Provides You ClockWorkMod Recovery (Most Famous) For Most Of The Spreadtrum Devices!
.
.
I Know You All Must Be Hunting For CWM Like I Did Once
.
.:
First I Would Like To Thanks "ElectronikHeart" For Providing The CWM For Spreadtrum™
.
.
.
You Must Be ROOTED To Use This Method! Cant Root?? Read My Thread Here: http://is.gd/gCPTj9
.
.
These Recoveries Are Not Ported By Me! All Credit Goes To 'ElectronikHeart'. I'em Just Compiling It At One Place
.
.
Requirements:
1) A Working Spreadtrum Device
2) MobileUncle Tool
3) CWM Recovery
4) A Pair Of Hands & Eyes
5) The Biggest Requirement: A Normal Working Brain
.
.
Here Are All The Recoveries:
.
.
1) For S6280 : http://is.gd/0PJXs0
.
2) For i9270+ : http://is.gd/fiFug2
.
3) For 5830, S5830, Q5830, Q206 & GT-N9300 : http://is.gd/3xLzZx
.
4) For S9300 Clone : http://is.gd/4WqA2Y
.
5) For Fieteng A7100 (May Work On Most Feiteng Devices) : http://is.gd/TpaHuD
.
6) For 6500-TV & S560 : http://is.gd/On1wnT
.
7) For N9300 (I9300 Clone) : http://is.gd/vNt0EC
.
8) For S930 & N8820 : http://is.gd/2j2fzQ
.
.
If Your Phone Is Not Listed, Then Try All Of Them! Anyone Will Certainly Work On Your Phone!
.
.
Flash It In Your Phone:
.
.
Step 1 : Download Recovery From Above!
.
Step 2 : Download & Install MobileUncle Tools From Here : http://is.gd/SzWnZg
.
Step 3 : Extract The Recovery Using Any Extractor (PowerGrasp).
.
Step 4 : Rename The File As 'recovery' Without Quotes.
.
Step 5 : Place It On Your SDCard (It Should Be On /sdcard i.e Not Inside Any Folder)
.
Step 6 : Open MobileUncle Tools '&' Tap On Recovery Update.
.
Step 7 : It Will Scan The Recovery On Your SD.
.
Step 8 : Tap On That Recovery & Let MobileUncle Flash It.
.
Step 9 : Bingo! You're Done!! It Will Ask To Boot In Recovery '&' Now You've CWM.
.
.
If It Doesn't Work On Yours Then Try The Same Steps With A Different Recovery!!
.
.
How To Boot Into Recovery Mode??
.
.
Turn Off Phone, Take Out Battery, Put It Back! Hold Power+Volume Down Button For Few Seconds. You Will Be In Recovery. Hoever, It May Be Different For Your Device!
.
.
Caution: Skipping Any Step Can Brick Your Phone & You Must Be Rooted To Use This Method! Use At Your Own Risk & Enjoy..
Click to expand...
Click to collapse
I have a spreadtrum sc8810 and i flash the recovery image for that but my recovery is upside down and i get errors such can't mount the backup part and before it goes to the recovery screen it sorta flashes and looks weird. Can you help me with this problem
kirito9 said:
I have a spreadtrum sc8810 and i flash the recovery image for that but my recovery is upside down and i get errors such can't mount the backup part and before it goes to the recovery screen it sorta flashes and looks weird. Can you help me with this problem
Click to expand...
Click to collapse
try different one
HELP
thedevilashish said:
How To Boot Into Recovery Mode??
Turn Off Phone, Take Out Battery, Put It Back! Hold Power+Volume Down Button For Few Seconds. You Will Be In Recovery. Hoever, It May Be Different For Your Device
Click to expand...
Click to collapse
Hello,
i have a spreadtrum 6820 (model Y9300), i flash the cwd recovery for my device..but i can't reboot into recovery mode when the phone is starting up.
I tried all the key combinations (with home+power i can only reboot into the factory menu)
For the recovery mode i must execute again the mobileuncle tool.apk from the begining and update recovery one more time.
Anyone help me plz?
thedevilashish said:
try different one
Click to expand...
Click to collapse
i did find another one that was working from a cherry mobile snap something but i have another problem i don't know if you can help...i can't get the device to show up with adb and i did everything installed all the drivers and i really need it to show up because my phone won't come on but it can go into recovery mode and also how can i create a .pac file to flash to the device
iperkinitikos said:
Hello,
i have a spreadtrum 6820 (model Y9300), i flash the cwd recovery for my device..but i can't reboot into recovery mode when the phone is starting up.
I tried all the key combinations (with home+power i can only reboot into the factory menu)
For the recovery mode i must execute again the mobileuncle tool.apk from the begining and update recovery one more time.
Anyone help me plz?
Click to expand...
Click to collapse
Did you try all recoveries listed above? If not try different recoveries.. Flash them from MobileUncle Tools again..
Sent from my GT-I9505 using XDA Premium 4 mobile app
kirito9 said:
i did find another one that was working from a cherry mobile snap something but i have another problem i don't know if you can help...i can't get the device to show up with adb and i did everything installed all the drivers and i really need it to show up because my phone won't come on but it can go into recovery mode and also how can i create a .pac file to flash to the device
Click to expand...
Click to collapse
Please tell me your device's name and processor info..
Sent from my GT-I9505 using XDA Premium 4 mobile app
thedevilashish said:
Please tell me your device's name and processor info..
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the phone is Blu Dash Jr and the processor info is SP8810 or SC8810 but i'm quite not sure since it also says SC6820 in build.prop it has 1GHZ and 2.3.5 || another update it's coming on but only in recovery mode but there is a trick to it the phone can be only turned on by plugging it in to the power and then you have to try and put it into recovery mode which works 9/10 times so i was thinking that i can just find a stock rom or something and restore..hope it will work....i also have the files from the .pac file but i don't know how to make a .pac file
---------- Post added at 10:34 PM ---------- Previous post was at 10:31 PM ----------
This is the link to the files in the .pac file
http://www.4shared.com/rar/43Ha5Puzce/dashjr_d140.html it would be great if you can help out
kirito9 said:
the phone is Blu Dash Jr and the processor info is SP8810 or SC8810 but i'm quite not sure since it also says SC6820 in build.prop it has 1GHZ and 2.3.5 || another update it's coming on but only in recovery mode but there is a trick to it the phone can be only turned on by plugging it in to the power and then you have to try and put it into recovery mode which works 9/10 times so i was thinking that i can just find a stock rom or something and restore..hope it will work....i also have the files from the .pac file but i don't know how to make a .pac file
---------- Post added at 10:34 PM ---------- Previous post was at 10:31 PM ----------
This is the link to the files in the .pac file
http://www.4shared.com/rar/43Ha5Puzce/dashjr_d140.html it would be great if you can help out
Click to expand...
Click to collapse
You Can Flash Pac File Into Your Phone By ResearchDownload.exe
Sent from my OMEGA HD 2.0 using XDA Premium 4 mobile app
thedevilashish said:
You Can Flash Pac File Into Your Phone By ResearchDownload.exe
Sent from my OMEGA HD 2.0 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i did that and now the phone is not coming on
Hi guys,
Newbie here.
I did use all the recovery listed there except for the Fieteng (because the link is unavailable anymore) but unfortunately all of them is not working for me, after MobileUncle reboot my phone in recovery it doesn't start up it just show my phone brand and the white screen forever, and the only thing to power it off is to remove the battery.
Can you help me guys?
Here is some specs of my phone:
CPU: ARMv7 Proc
BogoMIPS: 1024.00
Hardware: SP8810
Brand: sprd
Model: SKK A11
Android 2.3.5
Thanks!
Disclaimer: Flash at your own risk, I added tutorial so if something gone wrong to your phone, don't blame me.
Click to expand...
Click to collapse
New QMobile i9 Users
Click to expand...
Click to collapse
Click Here First
IMEI / NVRAM Backup
Click to expand...
Click to collapse
Method 1:
Before Installing the KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
Method 2 (In Case No IMEI Backup):
1.Be patient and it will fix your imei
2.Download the IMEI_WINDOWS.zip from here
3.Extract the contents to C:\Users\Username (Current User)
4.Open command promp and cd to the IMEI_WINDOWS folder
5.Now type "imei.exe 123456789111111 123456789111111" without quotes
6.Just replace both the 15 digit numbers with your IMEI 1 and IMEI 2 respectively
7.Now a file named "MP0B_001_NEW" will be generated in your IMEI_WINDOWS folder
8.Just rename it to "MP0B_001"
9.Now download the IMEI_FLASHABE.zip from here
10.Extract this zip and go to "/data/nvram/md/NVRAM/NVD_IMEI/"
11.Delete the placehere file and paste your "MP0B_001" file here
12.Now zip the META-INF and data folder and flash it with recovery
13.You have to flash this after you see imei error on your 1st boot
14.Don't flash directly after the ROM, just do your first boot then flash it.
Method 3 (In Case No IMEI Backup):
1.Download IMEI Repair Tool
2.Download Support Files
3.Instructions To Follow
QMobile KitKat Release
Click to expand...
Click to collapse
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Download Scatter File From Attachments And Add It In Firmware Folder Now Load It, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Official Noir i9 KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" or "subbinst-signed.zip" Via Recovery.
MyPhone KitKat Release
Click to expand...
Click to collapse
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Trust yourself you can do it!. :laugh:
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" Via Recovery.
MMX KitKat Release
Click to expand...
Click to collapse
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "subbinst-signed.zip" Via Recovery.
Custom ROM "Classic Kat" by Me
Click to expand...
Click to collapse
Click Here
Custom Rom Based On MMX
Click to expand...
Click to collapse
Custom Rom v3
1.Place ROM Zip File in your sdcard
2.Wipe data/factory reset
3.Wipe dalvik cache
4.Flash ROM from sdcard
5.Flash subbinst-signed.zip from attachment to get root access.
6.Enjoy a Proper and Stable KitKat
7.Download and Flash FILE_MANAGER.zip to remove error in the File Manager. :good:
8.If no engineering mode in your cell phone then download engineermode.apk and copy/paste in system app via Root Explorer
Increase App Storage
Click to expand...
Click to collapse
Use it only on MMX KitKat Release and on Custom ROM based on MMX. Not with MyPhone KitKat Release.
Step 1: Download "Internal APP storage (4GB MMXKK).zip" from bellow
Step 2: Extract the file
Step 3: Open SP Flash tools
Step 4: Add scatter file
Step 5:Select EBR1 and EBR2
Step 6: Click on Download
Step 7:Remove the battery from your Canvas 2 colors
Step 8:Connect your phone to pc via data cable
Step 9:wait for the completion of Flashing Process
Step 10:Reboot your Phone
Step 11ull down Notification panel and tap on the msg "Damaged Internal SD card"
Step 12: Tap on Format ...
Now Enjoy 2.1 GB app storage with 410MB Mass storage....
Revert Back To JellyBean i9 Official
Click to expand...
Click to collapse
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips. 1 file is missing in the firmware zip which is attached below named secro.img, add it in the firmware folder before proceed.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, wait till all files to load.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Stock JellyBean.
Add-ons
Click to expand...
Click to collapse
Click Here
Plese Hit thanks button if I helped you!
Click to expand...
Click to collapse
Frequently Asked Question (FAQ)
Click to expand...
Click to collapse
1. After I upgrade into kitkat firmware, can I downgrade again to Jellybean?
-Just flash dump rom of jellybean using spft.
2. I back up in CWM, Can I restore this in Kitkat version?
-No!
3.May I ask if we have custom recovery available for our kitkat version?
-Yes CTR
Credits
INCPAK
Biswajyoti
CallMeX!!
umangleekha
More Custom KitKat ROMs
You Must Be On KitKat To Flash These ROMs
Click to expand...
Click to collapse
ROM Links JellyBean 4.2
Click to expand...
Click to collapse
1. Huawei Honor 3C
2. Galaxy s5
ROM Links KitKat 4.4
Click to expand...
Click to collapse
1. KitKat Fresh v3 (4.4.2)
2. KitKat Emotion UI (4.4.2)
3. SlimKat Themed KitKat (4.4.4)
4. AOSP KitKat ROW (4.4.2)
5. Lenovo KitKat (4.4.2)
6. Android L Themed ROM
Procedure of Installation
Click to expand...
Click to collapse
1.Place Any ROM Zip File in your sdcard.
2.Wipe data/factory reset.
3.Wipe dalvik cache.
4.Flash ROM from sdcard.
5.Flash 4.4 Root.zip from attachment to get root access.
6.Enjoy.
Add-ons
Click to expand...
Click to collapse
Click Here
Note: Replace the boot.img in Fresh v3 to use Memory Card as default.
Click to expand...
Click to collapse
Credits
4pda.ru
Have you tried using titanium backup, go backup or lucky patcher after root genius because when i earlier flashed kitkat these apps weren't working and i had to revert back to jelly bean.
Edit: Thanks brother, all these apps are working after root genius. You've solved a big problem for me.
Add-ons
Add-ons
Click to expand...
Click to collapse
1.Best Keyboard In Town.
2a.Best Music Player In Town
2b.Music Player Add-on Patch
3.Best Camera App In Town
4.QMobile Stock Logo i9
5.Battery & Performance Patch
Procedure
Click to expand...
Click to collapse
1.Place Zip File in your SDCard.
2.Reboot Into Recovery.
3.Flash zip from sdcard.
4.Enjoy.
root genius failed.....when I flash CWM recovery it says PMT changed for rom
I alreay told in the post that flash the recovery with the ROM by replacing the included recovery
sorry my bad...tnks 4 reply
Always welcome
If you want to ask any question please ask on this forum only. Thanks
New i9 users must check this link
http://forum.xda-developers.com/showthread.php?t=2836748
Screen shots
qwerfaseeh said:
Before Installing the Official KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
7. IMEI backup is a must thing.
8. Enjoy Official Release.
[/B]
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
1. Just Install PDA.Net+ Driver
2. Use the Genuine Root method.
3. No need to install the root.zip first
4. Just attach cell phone and run genuine root and click on Root button.
Click to expand...
Click to collapse
provide screen shots of whole phone
Root method has been updated, and a new custom ROM named CleanKat is added in the thread, check the first and 2nd post for the easiest and most proper working root.
Mustafa Chaudhry said:
provide screen shots of whole phone
Click to expand...
Click to collapse
added now check the 2nd post
qwerfaseeh said:
added now check the 2nd post
Click to expand...
Click to collapse
I flashed the attached file but root checker says not proper root what to do?
Is there any superuser app in the app drawer?
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
qwerfaseeh said:
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
Click to expand...
Click to collapse
Yes, there is and I reflashed the zip file again and its resolved and root checker is happy with it
So r u happy with this easy and proper root?
Also comment about the easiest IMEI backup method
if any one want to increase App storage which is almost 700 MB see first post
Use it only on Official KitKat and 2nd Custom ROM. Not with 1st custom ROM or with Official Leak on 1st Post.
Hello Friends
A little background first !!
QiKU Q Terra (CP8692_I02) which was sold in India and came pre-installed with 360 OS v21, Android 5.1. The OEM went back to China hence there haven not been any software update for our device. I had been trying to boot latest Chinese 360 OS on Indian Qiku Terra to get updates but after flashing the Chinese version the device would not boot at all and would get stuck in fastboot mode. To revive the device, I had to flash back the V21, I had tried several times but no success.
I even got in touch with the 360 OS engineers over mail with the help of an administrator of Qiku Chinese forum but the engineers said it's not possible to flash Chinese 360 OS on Indian Qiku Q Terra.
I had also been trying to root QiKU and I was able to figure it out all recently.
Check out my post -- https://forum.xda-developers.com/an...i02-unlock-t3493636/post69455878#post69455878
This tutorial is also useful for users of CP8692_M02 who had flashed the v21 on their devices and now are not able to go back to CP8692_M02.
Warning !! Try this own your on risk although it's very safe if you follow the instructions without missing any steps. Don't blame me if you still manage to kill your phone and loose your job :laugh::laugh:
Let's begin !!
Just ensure your device bootloader is unlock before you follow the instructions as it's required to boot 360 Chinese OS on the Indian QiKU.
Download the latest firmware and flash the same with YGDP or Qiku Download Assistant tool. When finished, the device won't boot and still be in fastboot mode. Now boot TWRP recovery from your pc, go to the folder where you have the TWRP recovery and press shift and right click and select "open command window here" and type the following
fastboot -i 0x1ebf boot (recovery name).img
This should boot TWRP on your device.
You can also flash TWRP recovery if wish to,
fastboot -i 0x1ebf flash recovery (recovery name).img
Now boot TWRP
fastboot -i 0x1ebf boot (recovery name).img
When in recovery mode you can use cmd to extract params partition which contain your device model name. Open cmd on your pc and type the following command
dd if=/dev/block/mmcblk0p30 of=/sdcard/params.bak
Once done, you'll have a file name params.bak on your phone's internal memory, copy the same to your pc. Download NotePad++ and install it, link - https://notepad-plus-plus.org/
Only use NotePad++ to edit the params, don't use NotePad. Plus make a copy of your params.bak file and keep it somewhere safe in case you mess up with original params file.
Right click on params.bak and open it with NotePad++, now search CP8692. The device model name would be CP8692_I02 just change I to M and save the changes, now it should be CP8692_M02.
The system partition size is not enough to flash Gapps hence you need to use TWRP recovery resize option.
In TWRP recovery and select > Wipe > Advance Wipe > System > click FS Option > click Resize FS now you shall have more free space in system partition
In TWRP now click reboot then click bootloader, in bootloader press volume up for fastboot mode. On pc open cmd in the folder where you have params.bak saved and type the following command:-
fastboot -i 0x1ebf erase params
fastboot -i 0x1ebf flash params params.bak
fastboot -i 0x1ebf reboot
If everything went well your device should boot Chinese 360 OS, Android 6.0.1 normally.
Now flash modified Gapps in TWRP which you have downloaded. The modified Gapps has Gmail & Hangout beside core apps and rest you can download from play store later.
If you flash bigger Gapps, the device will not boot or it shall be in bootloops coz of Gapps size and if you don't flash Gmail and Hangouts with the modified Gapps and download the same from Play store then it would give you connection trouble.
In case you wish to root then flash SuperSU.zip in TWRP.
Back to the booted device:-
To Activate VoLTE, download QuickShortcutMaker app from play store. Open the app and locate MBN test > click on the dropdown menu > click Try > Tick Volte_OpenMkt-Commercial-CMCC > and last click Activate.
Close the app and go to phone setting > Call settings > and enble VoLTE and you're done. You should see HD sign in the status bar of your phone. Now you can enjoy VoLTE calls.
Download the latest 360OS 2.0 V18 stable version: http://pan.baidu.com/s/1slCmsKP password: i65r
Follow the tutorial to download from Baidu without log-in and download client - https://www.youtube.com/watch?v=cigJh9jg4-c
Download modified Gapps and supersu.zip - https://drive.google.com/drive/folde...ElFemQwTTFXcTQ
Credits:
Goes to me @Zauq for figuring out unlocking bootloader, rooting, modifying TWRP for cp8692_I02 etc. Without the unlocked bootloader the above was not possible.
Goes to @cuongvietnam for instructions to modify params and flashing the same and also about the Gapps size issue
Have Fun :good::good::good:
plz share firmware/rom
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process
Rahulraj2012 said:
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process
Click to expand...
Click to collapse
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working
mr_thao said:
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working
Click to expand...
Click to collapse
You can load bootloader in your manager device? If you can, so it not brick!
Zauq said:
Hello Friends
A little background first !!
QiKU Q Terra (CP8692_I02) which was sold in India and came pre-installed with 360 OS v21, Android 5.1. The OEM went back to China hence there haven not been any software update for our device. I had been trying to boot latest Chinese 360 OS on Indian Qiku Terra to get updates but after flashing the Chinese version the device would not boot at all and would get stuck in fastboot mode. To revive the device, I had to flash back the V21, I had tried several times but no success.
I even got in touch with the 360 OS engineers over mail with the help of an administrator of Qiku Chinese forum but the engineers said it's not possible to flash Chinese 360 OS on Indian Qiku Q Terra.
I had also been trying to root QiKU and I was able to figure it out all recently.
Check out my post -- https://forum.xda-developers.com/an...i02-unlock-t3493636/post69455878#post69455878
This tutorial is also useful for users of CP8692_M02 who had flashed the v21 on their devices and now are not able to go back to CP8692_M02.
Warning !! Try this own your on risk although it's very safe if you follow the instructions without missing any steps. Don't blame me if you still manage to kill your phone and loose your job :laugh::laugh:
Let's begin !!
Just ensure your device bootloader is unlock before you follow the instructions as it's required to boot 360 Chinese OS on the Indian QiKU.
Download the latest firmware and flash the same with YGDP or Qiku Download Assistant tool. When finished, the device won't boot and still be in fastboot mode. Now boot TWRP recovery from your pc, go to the folder where you have the TWRP recovery and press shift and right click and select "open command window here" and type the following
fastboot -i 0x1ebf boot (recovery name).img
This should boot TWRP on your device.
You can also flash TWRP recovery if wish to,
fastboot -i 0x1ebf flash recovery (recovery name).img
Now boot TWRP
fastboot -i 0x1ebf boot (recovery name).img
When in recovery mode you can use cmd to extract params partition which contain your device model name. Open cmd on your pc and type the following command
dd if=/dev/block/mmcblk0p30 of=/sdcard/params.bak
Once done, you'll have a file name params.bak on your phone's internal memory, copy the same to your pc. Download NotePad++ and install it, link - https://notepad-plus-plus.org/
Only use NotePad++ to edit the params, don't use NotePad. Plus make a copy of your params.bak file and keep it somewhere safe in case you mess up with original params file.
Right click on params.bak and open it with NotePad++, now search CP8692. The device model name would be CP8692_I02 just change I to M and save the changes, now it should be CP8692_M02.
The system partition size is not enough to flash Gapps hence you need to use TWRP recovery resize option.
In TWRP recovery and select > Wipe > Advance Wipe > System > click FS Option > click Resize FS now you shall have more free space in system partition
In TWRP now click reboot then click bootloader, in bootloader press volume up for fastboot mode. On pc open cmd in the folder where you have params.bak saved and type the following command:-
fastboot -i 0x1ebf erase params
fastboot -i 0x1ebf flash params params.bak
fastboot -i 0x1ebf reboot
If everything went well your device should boot Chinese 360 OS, Android 6.0.1 normally.
Now flash modified Gapps in TWRP which you have downloaded. The modified Gapps has Gmail & Hangout beside core apps and rest you can download from play store later.
If you flash bigger Gapps, the device will not boot or it shall be in bootloops coz of Gapps size and if you don't flash Gmail and Hangouts with the modified Gapps and download the same from Play store then it would give you connection trouble.
In case you wish to root then flash SuperSU.zip in TWRP.
Back to the booted device:-
To Activate VoLTE, download QuickShortcutMaker app from play store. Open the app and locate MBN test > click on the dropdown menu > click Try > Tick Volte_OpenMkt-Commercial-CMCC > and last click Activate.
Close the app and go to phone setting > Call settings > and enble VoLTE and you're done. You should see HD sign in the status bar of your phone. Now you can enjoy VoLTE calls.
The latest firmware is 360OS 2.0 (12.28) which is beta and gets weekly update. Download the firmware - http://bbs.360.cn/thread-14613403-1-1.html
Follow the tutorial to download from Baidu without log-in and download client - https://www.youtube.com/watch?v=cigJh9jg4-c
Download modified Gapps and supersu.zip - https://drive.google.com/drive/folde...ElFemQwTTFXcTQ
Credits:
Goes to me @Zauq for figuring out unlocking bootloader, rooting, modifying TWRP for cp8692_I02 etc. Without the unlocked bootloader the above was not possible.
Goes to @cuongvietnam for instructions to modify params and flashing the same and also about the Gapps size issue
Have Fun :good::good::good:
Click to expand...
Click to collapse
I wasn't take dd if=/dev/block/mmcblk0p30 of=/sd card/params.bak
C:\adb>dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
'dd' is not recognized as an internal or external command,
operable program or batch file.
Hlep me
mr_thao said:
I wasn't take dd if=/dev/block/mmcblk0p30 of=/sd card/params.bak
C:\adb>dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
'dd' is not recognized as an internal or external command,
operable program or batch file.
Hlep me
Click to expand...
Click to collapse
Have you tried the code in custom recovery mode??? If you're using the code when the device is NOT in recovery mode then you have to use the following code:-
adb shell
su
dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
Just bear in mind that you have to be rooted to use the above mentioned code and in recovery mode you don't need to be rooted.
mr_thao said:
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working
Click to expand...
Click to collapse
What was your device model no when you flashed the rom and which rom version did you flash which caused the brick???
Rahulraj2012 said:
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process
Click to expand...
Click to collapse
Flashing the supersu.zip to root Qiku is the easiest way if you ask me. I tried my best to give the instructions in a simplest way possible making video is not on my mind.
Changing the model no in build.prop would not help in booting Android 6.0.1 on Indian Qiku v21. Had this been so easy I would've done the same a long time ago
update file params.bak edited
step 1 : flash rom china and flash TWRP
Step2: flash params.bak
Step 3: reboot
Done
Link : https://tinhte.vn/threads/danh-gia-chi-tiet-qiku-terra-sieu-pham-den-tu-india.2543152/#post-49187102
Rom restore , rooted and playstore,super lite : https://drive.google.com/file/d/0B1JX0MSsEt63Zzd2MzVMb20wNTA/view
Hello bro,i want to downgrade to 5.1 v021 from 6.0 v18 china rom,but i haven't link rom.zip (i have twrp),give me link rom 5.1v021 .zip,please
Thanks for watching!?
volte is not activating even though option came by quickshortcut..app
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance
Rahulraj2012 said:
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance
Click to expand...
Click to collapse
Help me @Zauq. I am not able to download 6.0 update file from baidu as connection to file gets disconnected after 1 GB of data everytime. I have wasted atleast 10 GB of data due to this. Please help me out if you can upload the file to google.
Thank you in advance.
Rahulraj2012 said:
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance
Click to expand...
Click to collapse
Did you also enable VoLTE in system settings?? I would not be able to change Chinese language in 360safe.apk.
imlb said:
Help me @Zauq. I am not able to download 6.0 update file from baidu as connection to file gets disconnected after 1 GB of data everytime. I have wasted atleast 10 GB of data due to this. Please help me out if you can upload the file to google.
Thank you in advance.
Click to expand...
Click to collapse
My google drive is already full hence won't be able to upload it. Trying signing up Baidu and download the file with Baidu client.
Zauq said:
My google drive is already full hence won't be able to upload it. Trying signing up Baidu and download the file with Baidu client.
Click to expand...
Click to collapse
Thanks for your quick reply. I am not able to sign up on baidu. If you have latest file than please upload on any big file sharing site such as pcloud. That will be very helpful. I am bit of noob on development side of Android. I have developed kernel driver for real time linux but android I am learning. Please share if any good tutorials to start developing for Android. Thanks again @Zauq
imlb said:
Thanks for your quick reply. I am not able to sign up on baidu. If you have latest file than please upload on any big file sharing site such as pcloud. That will be very helpful. I am bit of noob on development side of Android. I have developed kernel driver for real time linux but android I am learning. Please share if any good tutorials to start developing for Android. Thanks again @Zauq
Click to expand...
Click to collapse
There you go --- https://drive.google.com/file/d/0Bwy9M10qfmJLVm9MQTU0N1U2Tnc/view?usp=sharing
Have somebody schematic diagram of qiku phones? Please let me know, if find something.
Hello dear all, I have 2 issues
1) not able to get volte , even though hd voice enabled via quick shortcut app
2)updated to android 6 but even though can't make my sd card as internal storage(option is for only as portable storage present....Just like galaxy s7 I also tried abd command, becoz in s7 also even after android 6 update sdcard as internal is not by default present .....But failed)
Plz help .....Thx in advance bro zuak
Rahulraj2012 said:
Hello dear all, I have 2 issues
1) not able to get volte , even though hd voice enabled via quick shortcut app
2)updated to android 6 but even though can't make my sd card as internal storage(option is for only as portable storage present....Just like galaxy s7 I also tried abd command, becoz in s7 also even after android 6 update sdcard as internal is not by default present .....But failed)
Plz help .....Thx in advance bro zuak
Click to expand...
Click to collapse
1) Do you see HD sign in the status bar after enabling VoLTE through QuickShortcurMaker App??
2) Did you follow similar adb shell command for internal storage?? --- https://www.youtube.com/watch?v=PZLV5STiAW8
1) I m able to get on/off volte settings after quick shortcut apk,but as u ask......No hd sign in status bar
2) yes I had applied same adb shell commands but nothing happens, 360 os restarted but no increment in internal memory I need to format my memory card to use it once again
I request to make a small video for this isse resolution and plz upload if possible