Official OTA HTC SV (LTE)
Download Link:
OTA: 2.14.401.2 - 1.17.401.5 (379 MB) - MD5: 193645F47EAC2D3901449349E4EA5C7B
OTA: 2.14.401.6 - 2.14.401.2 (32,2 MB) - MD5: 6743890707DA5C6FDD880DABFAC788E0
OTA: 3.11.401.1 - 2.14.401.6 (431 MB) - MD5: 0D6C763962FDC8915096B11B84329DC1
REQUIRED: STOCK RECOVERY / STOCK KERNEL / STOCK RUU
Guide: How To Manually Flash OTA File
Suggest: Disable Fastboot on Smartphone from "Settings" ==> "Power"
Download the OTA update ZIP File.
Copy OTA ZIP File on Smartphone. (Internal Storage or SD Card).
Boot to Recovery, from the PC command line (adb reboot bootloader) OR with button combinations on the phone. (Power + Vol. Down)
In Bootloader Select Recovery.
Wait until you see the picture.
Simultaneously Press the "Power" Button and "Volume Up", Until you see the Stock Recovery "Android System Recovery <3e>".
Select "apply from phone storage" OR "apply from sd card".
Select the zip file that you copied from the PC.
Do the Install, should take 10 minutes.
Tell it to Reboot.
If it brings you back to that dark screen with the battery icon, reboot again (Press Power + Vol. Up).
It will then reboot regularly, and say "Android is upgrading... optimizing app xxx of yyy."
shark147 said:
Official OTA HTC SV (LTE) (05/Nov/2013)
Build: v3.11.401.1 (JB 4.2.2 - Sense 5.0)Size: 431 MBMD5: 0D6C763962FDC8915096B11B84329DC1
REQUIRED: S-OFF / STOCK RECOVERY / STOCK RUU
I Download the OTA from my HTC One SV, for now I have not time for flash, I will try next Days.
for all who want to try or to the developer, the donwload can be found below:
Inside the OTA File you can find the new firmware.
DIRECT LINK: OTA_K2_UL_JB422_SENSE50_MR_HTC_Europe_3.11.401.1-2.14.401.6_release_338297mseg08soslxcubit.zip
Click to expand...
Click to collapse
Hi,
My question is...
Where i must put the OTA file??
I have Stock RUU and recovery.
Help plz
sdcard/Download/
Nothing
I have red exclamation mark.
I've change the directory. Its now in sdcard/download/.
It must be on ext_sd or on int_sd?
int_sd
Did you receive the update notification?
old.splatterhand said:
int_sd
Did you receive the update notification?
Click to expand...
Click to collapse
Nope.
So why do you think this will work for you?
If it would be so easy, every k2ul user could use this
Il try to manually install the update with no success.
The phone is k2_ul (LTE) cid 001 no brand. But no update notification.
I have never root or flash something.
At the end of the procedure I can't launch recovery because a red triangle with exclamation mark appares.
Do I have to rename the ota zip file?
Sent from my HTC One SV using xda app-developers app
You have to make sure that the android-info.txt file is listing your cid and mid. If not it needs to be included or else your device will not recognize the ota or simply put, abort.
Edit: wanted to include that you should look in the firmware.zip within the ota. If you are supercid you will be fine, but you still have to set up the mid.
---- Happy hunting
Sent from my C525c using XDA Premium 4 mobile app
I have a question. Is the boost version fully functional? I don't want to do this and then my device craps out...
cmyasika1 said:
I have a question. Is the boost version fully functional? I don't want to do this and then my device craps out...
Click to expand...
Click to collapse
The boost version is not an official version. It will indeed work very well, but given the two bugs that are listed in the OP of that thread, it can become annoying. Bluetooth works, messaging works, internet with WiFi works, everything works, except the two bugs. Myself and @russellvone spoke about the two bugs just recently and have decided to wait until the official OTA for boost comes out. When it does we are going to take some stuff from it and apply it to the port Rom I have shared on here. We expect it to not only fix the two known bugs but provide a 4.2.2 Rom without ANY bloatware that boost tries to slam us with.
Sent from my K2_CL using Tapatalk
---------- Post added at 11:27 AM ---------- Previous post was at 11:25 AM ----------
If you dont have a backup of your device then don't flash anything - that would just be suicidal regardless.
Sent from my K2_CL using Tapatalk
Hi at all,
Little Update Thread in OP, list all OTA released today.
Hi at all,
Another little update in OP: I added a useful guide how to flash OTA file.
I have tested this method on HTC SV of my girlfriend, and work fine.
shark147 said:
Hi at all,
Another little update in OP: I added a useful guide how to flash OTA file.
I have tested this method on HTC SV of my girlfriend, and work fine.
Click to expand...
Click to collapse
I got stucked at step 7. I don't know how exacly I shoud do the Key Press.....
unstoppable_punk_brainiac said:
I got stucked at step 7. I don't know how exacly I shoud do the Key Press.....
Click to expand...
Click to collapse
Hi,
Press both Power Button and Volume Up for some second, and then you can see the stock recovery.
example in attachement.
Step 7. doesn't work for me also. I see the picture and no matter if I press some buttons or not, it restarts by itself.
Hi every one
My phone not boot into recovery and boot up,when i turn on this show HTC logo and hang on.
i cannt go to recovery mode and my phone go to fastboot only but all fastboot command not respond to me.
When i typed any fastboot command i see Failed
please put ruu 3.11.401.1 - 2.14.401.6 for me
Thank
One SV VODAP001 OTA Available ??
Request for JB 4.2.2 RUU K2_UL
Request for JB 4.2.2 RUU K2_UL I have looked and can't seem to locate one.
Thanks in advance!
http://forum.xda-developers.com/showpost.php?p=59736913&postcount=16
Related
New OTA Update for the EU was released today. But it has the old Radio and no further changes, except the working PEEP Twitter Client
Updates HBOOT to 0.93 and of course you will lose root, if you install AS IS! Be careful and wait for a rooted version...
Official-Link:
http://fotadl.htc.com/OTA_Bravo_HTC_EU_2.10.405.2-2.09.405.8_releaseol2djq7rqarka2ka.zip
Mirror:
http://www.bestblog.de/dl.php?id=100
Thought, this could be useful
That does contain a radio update from 2.09.405.8, and updates HBOOT to 0.93, and changes the kernel too.
For me the HBoot was updated from 0.92 to 0.93.
Edit: There was some1 faster...
teppic74 said:
That does contain a radio update from 2.09.405.8, and updates HBOOT to 0.93, and changes the kernel too.
Click to expand...
Click to collapse
Thanks, teppic74 forgot to mention a warning in the first post
There are a few fixes in it. HTC's announcement is a bit vague:
Update Information: 1.Android OS update patch 2.Enhanced multi inbox Gmail support 3.Improved Russia keyboard layout
FatzzCat said:
New OTA Update for the EU was released today. But it has the old Radio and no further changes, except the working PEEP Twitter Client
Click to expand...
Click to collapse
AFAIK the older Peep is working again also, so the folks at Twitter just loosened their leash. *wondering if HTC gave some kind of incentive*
hi all. i have 2.09.405.8.
Can i install this new ota update manually? My desire is not rooted.
How can i install it?
thx
Yes, download it rename it update.zip (not update.zip.zip, mind!!) and put it on your SD card
Boot into HBOOT, select recovery and once you get to the red ! hold volume up and press power and select 'Apply SD:update.zip' and it will install
EddyOS said:
Yes, download it rename it update.zip (not update.zip.zip, mind!!) and put it on your SD card
Boot into HBOOT, select recovery and once you get to the red ! hold volume up and press power and select 'Apply SD:update.zip' and it will install
Click to expand...
Click to collapse
i believe that for now on there is no way to downgrade 0.93 or even root?
unrEVOked 3.2 works - I did it the other day with the now removed version. You can also downgrade using this guide:
http://forum.xda-developers.com/showthread.php?t=768256
unrEVOked will hopefully be up again soon so everyone can root easily!
hi guys,
I try to do downgrade because of the wifi problem, but i`m unable to go to recovery mode.
i`m using froyo 2.10.405.2 with gold card
I have a normal unrooted and unbranded desire. I have copied the update.zip on the SD card. How do I enter the recovery mode?
mcgon1979 said:
I have a normal unrooted and unbranded desire. I have copied the update.zip on the SD card. How do I enter the recovery mode?
Click to expand...
Click to collapse
1. Download the official firmware update.
2. Copy the file to your microSD card and name it update.zip (newb warning: not update.zip.zip)
3. Power off your phone.
4. Hold down the VOLUME DOWN button and power it back on.
5. The phone will now search for files like PB00IMG.zip, etc. This is normal. Scroll down to recovery and press the POWER button.
6. When you see the /!\ symbol, press the POWER button and the Volume Up button at the same time. You should be presented with a menu and one of the options should be "Apply sdcard:update.zip".
7. Use the trackball to navigate to "apply sdcard:update.zip" and select it.
8. When you see "Install from sdcard complete", select "reboot system now".
Via Sebaztian at xda Via Nickedynick over at Vodafone forums.
mcgon1979 said:
1. Download the official firmware update.
2. Copy the file to your microSD card and name it update.zip (newb warning: not update.zip.zip)
3. Power off your phone.
4. Hold down the VOLUME DOWN button and power it back on.
5. The phone will now search for files like PB00IMG.zip, etc. This is normal. Scroll down to recovery and press the POWER button.
6. When you see the /!\ symbol, press the POWER button and the Volume Up button at the same time. You should be presented with a menu and one of the options should be "Apply sdcard:update.zip".
7. Use the trackball to navigate to "apply sdcard:update.zip" and select it.
8. When you see "Install from sdcard complete", select "reboot system now".
Via Sebaztian at xda Via Nickedynick over at Vodafone forums.
Click to expand...
Click to collapse
I get ""signature verification failed" while updating, and the update process is aborted .....
Does anyone knows what this means?
Raven[PT] said:
I get ""signature verification failed" while updating, and the update process is aborted .....
Does anyone knows what this means?
Click to expand...
Click to collapse
I'm getting the same issue actually. I tried both downloading OTA, and this file, but same issue.
Edit: It's due to the phone being rooted, so either wait until someone smarter than me uploads a rooted version rom, or un-root.
guys i have downloaded the file and i have the Goldcard which i made earlier when i was updating to froyo from Eclair.
can i use that old GOLDCARD or i need to make a new one ?
please help ?
wahur1 said:
guys i have downloaded the file and i have the Goldcard which i made earlier when i was updating to froyo from Eclair.
can i use that old GOLDCARD or i need to make a new one ?
please help ?
Click to expand...
Click to collapse
I can confirm that you can use the same goldard. Just successfully updated debranded, non-rooted t-mobile Desire to build 2.10.405.2
Rooted version ?
Hi,
Is anyone working on a rooted version of 2.09.405.8 ?
To be honest I'm not that worried about root but I guess as what I have on here is a rooted ROM I'll have to wait till I can put one on.
I had the OTA notification but it failed in Clockworkmod.
Excuse my ignorance but If I do load this ROM will it wipe everything? The OTA update says it will retain all your data but obviously doing it this way it's a bit different I guess?
HTC updates usually don't wipe but it's always recommended to backup.
Normally flashing roms from clockworkmod does not wipe unless you select wipe in the menu.
Anyway. Do a nandroid backup from clockworkmod before flashing just in case.
Sent from my HTC Desire using XDA App
diggott said:
Hi,
Is anyone working on a rooted version of 2.09.405.8 ?
To be honest I'm not that worried about root but I guess as what I have on here is a rooted ROM I'll have to wait till I can put one on.
I had the OTA notification but it failed in Clockworkmod.
Excuse my ignorance but If I do load this ROM will it wipe everything? The OTA update says it will retain all your data but obviously doing it this way it's a bit different I guess?
Click to expand...
Click to collapse
You can't apply the OTA to a rooted phone, you need to go back to stock and do it again. Easier to just use the 2.10.405.2 RUU and then root it again
Hello ,
I have read many posts , some saying you can get the update if you are rooted/s-off and some say you cant .
I have sensationXE 2.3.4 1.73.707.4 10.58.9035. kernel : 2.6.35.13
I have Done S-off and root , but I did not flash the devise or install any rom still on stock
.
Will It be able to run the ota update when it pops in software update ?
What will have to do to install the update by the OTA file ( any special steps for this case ) ?
I have searched in the forum for this exact situation , I did not find . Please clarify this for me and for others with similar cases
Thank you
nefedroid said:
Hello ,
I have read many posts , some saying you can get the update if you are rooted/s-off and some say you cant .
I have sensationXE 2.3.4 1.73.707.4 10.58.9035. kernel : 2.6.35.13
I have Done S-off and root , but I did not flash the devise or install any rom still on stock
.
Will It be able to run the ota update when it pops in software update ?
What will have to do to install the update by the OTA file ( any special steps for this case ) ?
I have searched in the forum for this exact situation , I did not find . Please clarify this for me and for others with similar cases
Thank you
Click to expand...
Click to collapse
u need stock recovery to install ota
If u r still stock 100% but rather s-off, u should be fine. Whenever u receive the update just take the update like it says too, no special instructions. When people say u lose root that means, no superuser, busybox, and so on. U should still keep s-off
You won't get it yet as the initial release is for EU unbranded handsets. Other regions will roll out soon I'd imagine, followed by branded handsets
can i put file on sd ( ota file ) and update from cm recovery .
" Update usign zip "?
nefedroid said:
can i put file on sd ( ota file ) and update from cm recovery .
" Update usign zip "?
Click to expand...
Click to collapse
No, you need stock recovery
Sent from my Galaxy Nexus using xda premium
or download the stock file and install it from sd card
any guide on how to go back to stock recovery?
Ok you said you were stock and all you have done is S-off your Sensation XE and root it. If this is all you have done you still have the stock recovery and you can just download the OTA update file and place it on the root of your SD card. Then boot your Sensation into the boot loader by either taking your battery out or go into settings/power and uncheck the box for fastboot. You have to do either one of these to make sure your device is completely powered down. Next you need to power on your Sensation while holding the volume down button dow. Then use the volume rocker to scroll to recovery and press the power button. Then just follow the on screen instructions to flash the OTA file.if the file does not appear you either do not have the file on the root of your SD card or the file is not properly named. Post back here with your results.
thank you for this info dear sir.
Do u think i should do it this way or
wait for my update notification to pop ( will i be able to install it if am rooted) ?
Thanks again
I pressed my volume down+ turn off -> recovery - > it is titled CLOCKWORKMOD Recovery v5.0.0.8 ??
nefedroid said:
thank you for this info dear sir.
do u think i should do it this way or wait for my update notification to pop ?
or is it the same ?
Thanks again
Click to expand...
Click to collapse
You are welcome, as far as if you should wait or not that is totally up to you. The only draw back to not waiting really is that you will not have certain apps that your carrier includes in the ROM for their Sensation. Like for example if I flashed it now and did not wait for the OTA update message to pop up on my phone I will not have any of the T-Mobile apps on my Sensation, the only one I care about anyway is the WiFi hotspot app. But I think you see what I am talking about. Plus if you do not wait you will have to S-off your Sensation and write Super CID to your Sensation to flash the available ICS and Sense 3.6 OTA update file. The drawback to waiting is just waiting lol. Well that and the fact that if there is ever another OTA update for your Sensation you will have to flash the correct stock ICS update for your Sensation to get it via OTA and not by downloading it, placing it on the root of your SD card, and then booting into the stock recovery to flash of.
nefedroid said:
thank you for this info dear sir.
Do u think i should do it this way or
wait for my update notification to pop ( will i be able to install it if am rooted) ?
Thanks again
I pressed my volume down+ turn off -> recovery - > it is titled CLOCKWORKMOD Recovery v5.0.0.8 ??
Click to expand...
Click to collapse
Sorry I just now saw that you had edited your post. If it says CLOCKWORKMOD Recovery v5.0.0.8 then you do not have the stock recovery you have Clockworkmod Recovery wich is a custom recovery. So you will have to flash the stock recovery back to your Sensation before you can flash the ICS and Sense 3.6 OTA update, if it was not so late I would see if I could not put together a Clockworkmod and other custom recovery flashable .zip file so everyone would not have to revert back to stock recovery to flash the OTA update. Anyway to revert back to stock recovery you will need to flash a stock ROM back to your Sensation. And seeing as you are Super CID you can flash any stock ROM you want. Just go to here to download a official stock ROM. All the ROMs in the link are RUU.exe files so you will have to connect your Sensation to your computer via your USB cord and then run the RUU.exe. Once you have flashed the stock ROM you just need to follow my directions from my other post and you should be good to go.
nefedroid said:
thank you for this info dear sir.
Do u think i should do it this way or
wait for my update notification to pop ( will i be able to install it if am rooted) ?
Thanks again
I pressed my volume down+ turn off -> recovery - > it is titled CLOCKWORKMOD Recovery v5.0.0.8 ??
Click to expand...
Click to collapse
clockworkmod is not stock recovery... (facepalm)
Sent from my BlackBerry Runtime for Android Apps using Tapatalk
so, any clear guide for dumb people like me, on how to flash to ICS for sensation XE when allready rooted with clockwork recovery please?
OFFICIAL JELLY BEAN FOR S3:
Hi all,
I made a small modification on the TW OTA package, so now can be flashed with unlocked bootloader from TWRP.
I am not responsible if you brick your phone.
Anyway always do backup before do anything.(I successfully recovered my phone with that backup)
FOUND BUG BY MYSELF:
INSTEAD OF REAR SPEAKER, SOUND COMES FROM FRONT SPEAKER, DON'T USE TOO LOUD STILL NO FIX
BUGFIX:
Sound playing, ringtone etc fixed by me. Need to fix video record bug. (video sound playing on front speaker)(afterall i upload patch)
Its fixing the sound generally, but videorecorder sometimes switches between two speaker, fix if you record more once, then it switches back. Fix comeing soon.(please check somebody, becuse maybe HBOOT related problem, and maybe only on my phone this problem)
http://hos.dqbp.co.uk/villec2_jb_speakerfixv9.zip
INSTALLATION:
For those who have S-OFF, just:
-copy to /sdcard and reboot to recovery, install zip
Fot those who have S-ON, just
-copy to /sdcard and reboot to recovery, install zip
-and then reboot your phone in fastboot mode
-extract boot.img from downloaded zip, and place near your fastboot
-flash boot.img extracted from the zip with: fastboot flash boot boot.img
Reboot, and thats it.
Might need to update this from latest european RUU(with Sense 4.1), because i used to use that.
It seems to work on all HBOOT version.
WHAT IS THIS?
I made it to Global one, with all languages, without TW apps.
4.1.1 with Sense 4+
Software number: 3.14.709
DOWNLOAD:
http://hos.dqbp.co.uk/villec2_jbnew.z01
http://hos.dqbp.co.uk/villec2_jbnew.z02
http://hos.dqbp.co.uk/villec2_jbnew.z03
http://hos.dqbp.co.uk/villec2_jbnew.z04
http://hos.dqbp.co.uk/villec2_jbnew.z05
http://hos.dqbp.co.uk/villec2_jbnew.z06
http://hos.dqbp.co.uk/villec2_jbnew.z07
http://hos.dqbp.co.uk/villec2_jbnew.z08
http://hos.dqbp.co.uk/villec2_jbnew.z09
http://hos.dqbp.co.uk/villec2_jbnew.z10
http://hos.dqbp.co.uk/villec2_jbnew.z11
http://hos.dqbp.co.uk/villec2_jbnew.zip
MD5:
Code:
fdd99a7965e3601ccff4ccf7b21e9638 *villec2_jb.zip
(use anything like winrar or 7zip to extract it)
(if error at extracting, please let me know, and i upload again the wrong file)
(any fast mirror is welcome, i have slow internet)
(if you use it as your custom rom, please don't forget to let people know where is it from)
If you like my work, please press Thanks!
waiting ...
Sent from my HTC One S using xda premium
4/12 50mb packet is uploaded will take some more time
Keeping fingers crossed
If this running on 2.11 hboot?
wyciachane z 1esa
Should work on all hboot.
Links alive. Cheers
Can't wait for feedbacks... Please if anyone tryed let me know.
Please read first post about bug
Gr8 thx m8. If i have some time i will dl this rom. (Kössz tesa )
Sent from my HTC One S using Tapatalk 2
Heyy!!
Do you Have Super Su installed?
I'm testing the update right now. I flashed SuperSu-0.99 and when i'ts updating the Su binarys, crash and reboots the phone.
Keep testing and Thanks!! Finally i have got JB on my One S
Unfortunately this boot loops on me.
I am running hboot 2.09. Aussie s3.
I Have HBOOT 2.11.
My steps:
1.Restore Recovery to Original
2.Relock the Bootloader
3.Apply RUU 4.0.4
4. Unlock bootloader
5. Flash TWRP recovery
6.Wipe
7. Install JB.zip
8. Flash boot.img of JB.zip
At the moment, only have problem with Su Binary's.
Macanakin said:
I Have HBOOT 2.11.
My steps:
1.Restore Recovery to Original
2.Relock the Bootloader
3.Apply RUU 4.0.4
4. Unlock bootloader
5. Flash TWRP recovery
6.Wipe
7. Install JB.zip
8. Flash boot.img of JB.zip
At the moment, only have problem with Su Binary's.
Click to expand...
Click to collapse
Yes, i can confirm this. I did the same to get working.
Macanakin said:
At the moment, only have problem with Su Binary's.
Click to expand...
Click to collapse
On S4 we had problem with supersu. It wont let you update binaries and restarts. Try use superuser instead.
Sent from my HTC One S using xda app-developers app
Macanakin said:
I Have HBOOT 2.11.
My steps:
1.Restore Recovery to Original
2.Relock the Bootloader
3.Apply RUU 4.0.4
4. Unlock bootloader
5. Flash TWRP recovery
6.Wipe
7. Install JB.zip
8. Flash boot.img of JB.zip
At the moment, only have problem with Su Binary's.
Click to expand...
Click to collapse
Restoring stock NANDROID doesnt work?
Sent from my HTC One S using xda app-developers app
luxandroid said:
Restoring stock NANDROID doesnt work?
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
It's very possible, don't forget make a factory reset before install JB.zip and flash boot.img
---------- Post added at 11:34 AM ---------- Previous post was at 11:29 AM ----------
tominozh said:
On S4 we had problem with supersu. It wont let you update binaries and restarts. Try use superuser instead.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Tryed Superuser3.2-RC3 and SuperSu.0.99.
Also tryed Easy_InitD.zip without luck
At the moment i have a "half Root" but i can´t write on /system
Good Luck!
Is it necessary to have 4.0.4 as base? I have 4.0.3 as base with sense 4.1 , will it work?
Merrymustu said:
Is it necessary to have 4.0.4 as base? I have 4.0.3 as base with sense 4.1 , will it work?
Click to expand...
Click to collapse
I think you need 4.0.4 because Upgrade 4.0.3-4.0.4 it's a big deal.
uncledrax said:
Unfortunately this boot loops on me.
I am running hboot 2.09. Aussie s3.
Click to expand...
Click to collapse
Cool down i think HTC will roll up JB for S3 this end jan.
Hi I have a HTC One s S3 with android 4.0.3 and Cid is VODAP102.
On the Htc ist Trickdroid 3.0 running .
Can I install JB on this Phone or not?
sry for my bad english im grom germany.
mfg
Hello,
need to flash OTA for mu x920e with s-on an unlocked bootloader
How to do it properly ? I've tried to flash it from stock and custom recovery but I have error 7
Thank's
Get an SOFF or else u wont b able to flash OTA.
Stock recovery is a must.
There is another method but not for SON.
bluheart said:
Get an SOFF or else u wont b able to flash OTA.
Stock recovery is a must.
There is another method but not for SON.
Click to expand...
Click to collapse
Thank's
I'm on s-off now, waiting for the method !
octopus82 said:
Thank's
I'm on s-off now, waiting for the method !
Click to expand...
Click to collapse
1. Make sure you have the stock (original) recovery flashed on your device
2. Copy the OTA update.zip package to your device
3. Hold your volume down and power keys until the bootloader starts up
Using the volume keys, navigate down to RECOVERY and press power
You are now in stock recovery mode. Wait a few seconds until the Android with the red exclamation mark above it apears.
4. press vol up + vol down + power to enter the main recovery menu.
5. Navigate down to "apply from phoene storage" text and press power to confirm
6. Navigate to the location where you copied the OTA update.zip package and press power to confirm
doki_93 said:
1. Make sure you have the stock (original) recovery flashed on your device
2. Copy the OTA update.zip package to your device
3. Hold your volume down and power keys until the bootloader starts up
Using the volume keys, navigate down to RECOVERY and press power
You are now in stock recovery mode. Wait a few seconds until the Android with the red exclamation mark above it apears.
4. press vol up + vol down + power to enter the main recovery menu.
5. Navigate down to "apply from phoene storage" text and press power to confirm
6. Navigate to the location where you copied the OTA update.zip package and press power to confirm
Click to expand...
Click to collapse
thank's
I dont have only stock recovery from the OTA, but it not work
I've seen that you have the 4.3 stock rom, Can you give me a link to download it please ?
Thank's
octopus82 said:
thank's
I dont have only stock recovery from the OTA, but it not work
I've seen that you have the 4.3 stock rom, Can you give me a link to download it please ?
Thank's
Click to expand...
Click to collapse
i updated my phone with the official OTA, and rooted it afterwards.
what rom are you using now?
doki_93 said:
i updated my phone with the official OTA, and rooted it afterwards.
what rom are you using now?
Click to expand...
Click to collapse
So I hope that make an nandroid backup for your device and send it me to download and install it on mine
Can you do it please ?
Thank's
Get your x920E OTA here
bluheart said:
Get your x920E OTA here
Click to expand...
Click to collapse
thank you for this link
I've tried to flash OTA 2.33.401.4 to 3.13.401.4 but I have everytime "aborted installation"
I've an custom rom, but I install stock boot and recovery
I'm s-off with unlock bootloader and I've change my cid from HTCCN701 to HTC__001
Can you help me to upgrade to official european 4.3 please ?
Thank's
octopus82 said:
thank you for this link
I've tried to flash OTA 2.33.401.4 to 3.13.401.4 but I have everytime "aborted installation"
I've an custom rom, but I install stock boot and recovery
I'm s-off with unlock bootloader and I've change my cid from HTCCN701 to HTC__001
Can you help me to upgrade to official european 4.3 please ?
Thank's
Click to expand...
Click to collapse
Install TeamWin Recovery:
DL: http://teamw.in/project/twrp2
rename the .img to recovery.img and place it in your fastboot folder
flash it with:
fastboot flash recovery recovery.img
- now you have TWRP
Download Bassies Backup und thank him here!!!
Bassie39 said:
Stock backup european butterfly Deluxe U 4.2.2 sense 5
Backup
Click to expand...
Click to collapse
put the backup on your phones internal storage and restore it via recovery.
- now you have stock 4.2.2
flash stock recovery (just like you flashed the TWRP)
download the OTA and install it!
- you should have 4.3 with sense 5.5
good luck
I have an S-On and Root. Still in 4.1.1 in X920D. I want to get access to OTA for updates again. Can use a stock backup of Bassie39 for 4.2.2 and then I receive OTA updates? If not, how get stock again and receive OTA? Need make S-OFF for this things?
My backup s are from European x920e doesn't work on x920d. Many people forget to backup system, normally you start with backup of system then try to use custom roms and kernels
Sent from my HTC Butterfly using xda app-developers app
Bassie39 said:
My backup s are from European x920e doesn't work on x920d. Many people forget to backup system, normally you start with backup of system then try to use custom roms and kernels
Sent from my HTC Butterfly using xda app-developers app
Click to expand...
Click to collapse
I did not bought this new HTC. I bought it used. And was not I who made the Root. I do not like root, not need it. I just wanted to go back to all original. And get updates via OTA again. I'm on android 4.1.1. I can not find the RUU for X920D version. I found one that is Asia, but mine is Europe. I do not know if I can use. Not even know where to start, this world Root, S-ON, S-off HBOOT, is all new to me.
Thanks for the reply.
One more thing. I'm currently using a version Bassie39 "CWM Backup 4.1.1 European x920e
Backup 4.1.1 "
I try to use "
TWRP Backup 4.2.2 European x920e
Backup 4.2.2" but receive an error of MD5.
Why will not update via OTA? Or is it because you are superuser and ROOT? As I leave without Root?
A fix. I discovered that my HTC X920E is the model, although the box is written that he is x920d. In the back of the unit says it is the PL99300 model, and researching I found out that it means it is a X920E.
Could anyone help me to return it to Stock ROM and get OTA updates again, or how to put a newer Stock ROM that has sense 5?
**You can begin the following process from any 4.4.x Build/ROM or higher but you must already have Root Access**
**Required** FlashFire - Play BETA - PREVIEW.
**Caution!** The following process is only for the AT&T I337 S4 Variant. Use on any other device may result in a hardbrick!
Downloads:
- I337_OK2_Stock_Rooted_ROM.zip
- I337_OK2_Stock_Rooted_Deodexed_ROM.zip
Attention! Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set Reboot setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I337_OK2_Bootloader.tar.md5 using Odin's PDA/AP slot. Done!
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes (15 - 20 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- None!
Optional:
- I337_OK2_TetherAddOn.zip
- I337_OC3_Batch_Debloater (Customizable)
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery.
3. No need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
5. To learn more about FlashFire's capabilities on locked bootloader devices see here: http://forum.xda-developers.com/showpost.php?p=60070810&postcount=2
Credits:
@Chainfire
Awesome
Amazing! you done it again @muniz_ri downloaded and installed perfectly!
Is there a way to root without having to flash back to nj4? I'm already on OC3 and a non-odin method like on nj4 would be pretty nice.
muniz_ri said:
Instructions:
1. Extract the I337_OC3_Stock_Rooted_Backup from the .rar archive and place it into the following folder: ext-sdcard/TWRP/BACKUPS/xxxxxx, fyi...the name of this folder will vary. If the folder does not already exist you must first use safestrap to create a nandroid backup and Safestrap will create the folder for you.
2. From Safestrap recovery press "Wipe" then "Advanced Wipe" and wipe everything but your ext-sdcard.
3. From the main menu press "Restore," then select and restore the I337_OC3_Stock_Rooted_Backup.
4. Once complete from the main menu press "Reboot," then reboot into "Download" mode.
5. Last, flash the I337_OC3_Stock_Partitions using Odin's PDA slot (AP in Odin v3.09+) and reboot. Done!
Upon reboot the Safestrap Recovery splash screen will flash a few times before pausing on the AT&T splash screen for about 2 minutes before completely rebooting. **You will no longer be able to access Safestrap Recovery from 5.0 (see notes below for workaround)**
Optional Tethering AddOn:
1. Place the I337_OC3_TetherAddOn onto your ext-sdcard.
2. From Safestrap recovery press "Install," then select and install the I337_OC3_TetherAddOn(Do not wipe prior to flashing!).
3. Reboot. Done!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. This process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OC3 (BusyBox is also pre-installed).
3. Safestrap will no longer function after updating to 5.0. However you can access Safestrap recovery by flashing back the I337_NJ4_Stock_Kernel (reflash the I337_OC3_Stock_Kernel once you are done using Safestrap).
4. The most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Credits:
@Apoplectic1 - for capturing the OTA update.
Click to expand...
Click to collapse
Muniz you are great you are genius, but i'm lol nothing to do with this kinda great work so, please a little explain to me
I am a crazy fan of you and of course you great work
i have an AT&T i337UCUFNJ4 unrooted (may be because rootchecker.apk shows root access is not properly installed on this device) so it somehow means that i am on stock firmware but unfortunatly i live in a country where ATT has no existance so, no AT&T SIM card or so, now i want to update my phone to LOOOOOOOOLIpop
Please tell me if i have no roooted phone and no working safestraf in it what can i do please,
i
how do i update if i am on unrooted NJ4?
talvigi said:
Muniz you are great you are genius, but i'm lol nothing to do with this kinda great work so, please a little explain to me
I am a crazy fan of you and of course you great work
i have an AT&T i337UCUFNJ4 unrooted (may be because rootchecker.apk shows root access is not properly installed on this device) so it somehow means that i am on stock firmware but unfortunatly i live in a country where ATT has no existance so, no AT&T SIM card or so, now i want to update my phone to LOOOOOOOOLIpop
Please tell me if i have no roooted phone and no working safestraf in it what can i do please,
i
Click to expand...
Click to collapse
onisleeve said:
how do i update if i am on unrooted NJ4?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...to-root-i337ucufnj4-4-4-4-11-13-2014-t2939553
Noob Alert!
Elated to hear about that the Lollipop update for ATT S4 is out.
Newbie here ! I own an ATT S4 running Official jelly bean, Its rooted & unlocked so that I can use here in India. Can anyone help me how do I got about with the upgrade with losing the unlock?
Do I need a custom ROM like TWRP ?
or any links to guides to how to go about it.
muniz_ri said:
http://forum.xda-developers.com/gal...to-root-i337ucufnj4-4-4-4-11-13-2014-t2939553
Click to expand...
Click to collapse
dude, thanks for your reply,
i guess i was not clear, i am unrooted on NJ4 and need to remain unrooted to 5.0
I use GOOD for Enterprise for work email hence the need to remain unrooted.
onisleeve said:
dude, thanks for your reply,
i guess i was not clear, i am unrooted on NJ4 and need to remain unrooted to 5.0
I use GOOD for Enterprise for work email hence the need to remain unrooted.
Click to expand...
Click to collapse
Here After We Can Update Our AT&T Samsung Galaxy S4 Software Update Via .. ADB Sideload
We Can Use This Method To Update Our Phone :
1) Install Samsung USB Drivers
2) Start Samsung Recovery [ Volume Up + Home + Power ]
3) Select " Apply Update From The ADB "
4) On PC : Install Minimal ADB and Fastboot Software ... Then Put The Update File (ZIP) On Same Folder
5) Open Minimal ADB and Fastboot : After Type : - adb sideload FILE NAME.zip
5) Update Successfully.
You Will LOSING OUR DATA OR CONFIGURATION
Here OTA 5.0.1 Update :
https://www.androidfilehost.com/?fid=95916177934552137
ashishk2 said:
Elated to hear about that the Lollipop update for ATT S4 is out.
Newbie here ! I own an ATT S4 running Official jelly bean, Its rooted & unlocked so that I can use here in India. Can anyone help me how do I got about with the upgrade with losing the unlock?
Do I need a custom ROM like TWRP ?
or any links to guides to how to go about it.
Click to expand...
Click to collapse
Iam from India too! ?
BhavyaBirla said:
Iam from India too! ��
Click to expand...
Click to collapse
Are ya trying to upgrade to Lollipop too ?
Hello guys,
I am also from india with S4 AT&T i337 (NJ4) and downloading this rom.
i will update u guys after flashing
ashishk2 said:
Are ya trying to upgrade to Lollipop too ?
Click to expand...
Click to collapse
Me too.. But I'll have to wait to download this! Where are yo u guys from?
gdjindal said:
Hello guys,
I am also from india with S4 AT&T i337 (NJ4) and downloading this rom.
i will update u guys after flashing
Click to expand...
Click to collapse
Sent from my SM-N910S using XDA Free mobile app
Hay guys I too not in the US so having an OTA update is indeed impossible, and my i337UCUFNJ4 is also not rooted ( i have tried many times but failed to root) and yet i want to update my phone to lollipop can you guys please tell me what to do next after i download the OTA update from here https://www.androidfilehost.com/?fid=95916177934552137
waiting for your simple and step to step guide
thanks
Thanks
talvigi said:
Hay guys I too not in the US so having an OTA update is indeed impossible, and my i337UCUFNJ4 is also not rooted ( i have tried many times but failed to root) and yet i want to update my phone to lollipop can you guys please tell me what to do next after i download the OTA update from here https://www.androidfilehost.com/?fid=95916177934552137
waiting for your simple and step to step guide
thanks
Click to expand...
Click to collapse
Manually Flash OC3 -- Lollipop 5.0.1 -- Update via Stock Recovery
1. Copy 2400258.zip to your External SdCard
2. Unplug and power off phone
3. Boot into Stock Recovery
--- press and hold BOTH power and volume up buttons
--- when you see the blue "RECOVERY BOOTING..." message in the top left corner, release power button
--- when you see the android guy, release volume up button
4. Select "apply update from external storage"
5. Browse to location of 2400258.zip and select it
6. Phone will reboot when complete.
:laugh:
@jack_ssl can I follow the instruction from JB to Lollipop ?
jack_ssl said:
Manually Flash OC3 -- Lollipop 5.0.1 -- Update via Stock Recovery
1. Copy 2400258.zip to your External SdCard
2. Unplug and power off phone
3. Boot into Stock Recovery
--- press and hold BOTH power and volume up buttons
--- when you see the blue "RECOVERY BOOTING..." message in the top left corner, release power button
--- when you see the android guy, release volume up button
4. Select "apply update from external storage"
5. Browse to location of 2400258.zip and select it
6. Phone will reboot when complete.
:laugh:
Click to expand...
Click to collapse
Well Thanks Jack_ssl, if it is so easy to do it i would really really laugh at myself not because i didn't know that all, becuase i really don't know that all but i will be happy enough that i may go crazy and laugh. waiting for my download to be completed its almost 72% now
BUt one thing the file "2400258.zip" where does it come from is it the unzipped file name of 5.0update.zip or i'll have to grab it from somewhere i don't know yet?
Yes
ashishk2 said:
@jack_ssl can I follow the instruction from JB to Lollipop ?
Click to expand...
Click to collapse
Yes .. But One Thing First Kitkat Then After Lollipop ... Ok ...:laugh:
---------- Post added at 02:59 PM ---------- Previous post was at 02:56 PM ----------
talvigi said:
Well Thanks Jack_ssl, if it is so easy to do it i would really really laugh at myself not because i didn't know that all, becuase i really don't know that all but i will be happy enough that i may go crazy and laugh. waiting for my download to be completed its almost 72% now
BUt one thing the file "2400258.zip" where does it come from is it the unzipped file name of 5.0update.zip or i'll have to grab it from somewhere i don't know yet?
Click to expand...
Click to collapse
Yes , Unzip First U Will Get 2400258.cfg .. Just Change Extension .cfg to .zip ... Then Put into the extsDcard ....
jack_ssl said:
Yes .. But One Thing First Kitkat Then After Lollipop ... Ok ...:laugh:
---------- Post added at 02:59 PM ---------- Previous post was at 02:56 PM ----------
Yes , Unzip First U Will Get 2400258.cfg .. Just Change Extension .cfg to .zip ... Then Put into the extsDcard ....
Click to expand...
Click to collapse
Doing it in the name of God and by the great work of you all guys but most perfectly you Jack, Thanks a lot
install/sdcard,,,,,
finding update package,,,,,
opening update package,,,,
verifiing update package,,,,,
insalling update,,,,,
verifying current system,,,,
removing unneeded files,,,,,
patching system files,,,,,,
patching NON-HLOS.bin img,,,,,
patching modem.bin img,,,,,,
fulll patching boot.img img,,,
package boot.img ,,,
and many more
install from sdcard complete
in the medal it showed two or more red lines of writing too cut started,
i noticed the samsung logo changed and now its the ATT logo for a minut let me wait for a cuple of minuts more
Oh yes the chage has shown its face it is the new thing i was waiting for
thanks Jack_ssl it work like charm , the method you told me works
and i am sorry Apoplectic1 you actually did the great job first by fetching the ota update thanks a lot.