[Q] NAT and router in Android - General Questions and Answers

Hi,
I want some software or command-line commands to make my Samsung Galaxy Note N7000 (android 2.3.6) temporarily as NAT router. But I dont want tethering or make phone as wifi router, but instead as wifi client. I want connect to internet through 3g and then route and NAT all incoming packets from wifi connection to 3g. So, my client computer is in LAN, in LAN I have wifi router, computer client connects to internet through: computer client --> LAN router --> phone wifi-client (phone wifi client makes connection to wifi router) --> phone NAT and routing --> phone 3G network connection --> internet.
Thanx.

Related

[Q] Dial up mortscript via wi-fi

i have a belkin wireless router at home and it is connected to my adsl modem.. now, the modem does not dial the connection on its own, but i have to make a dialup connection with the username and password from my pc when i connect to the belkin network.. i want to access the wifi network from my htc topaz. so, is there any way, like through mortscript, to make a dialup connection via wifi using my broadband username and password?

[Q] Automatic openvpn connection when not in home lan

Hi!
How can I establish an automatic openvpn connection when not in my home lan.
I am also using a Nokia N900. Here I can use a dbus call, which examines, if I am
in my home lan or not. If not, the openvpn connection is established automatically,
no matter, if it is in a foreign lan, or on 3G.
Is it possible to do so on Android?

[Q] [openvpn, cm7] Hotspot not functional when openvpn is connected

I'm using CM7 stable (7.0.3) with a Nexus One.
When I enable the hotspot feature without having the phone connected to my openvpn server, my laptop (connected to the hotspot) connects to the web fine. The phone's internet connection works fine as well.
But when I enable the feature while connected to the openvpn server, even though the internet works on the phone, my laptop connects to the hotspot but cannot send/receive any data. I can ping my phone from my laptop, but pings go unanswered for example to google.com or 8.8.8.8...
Does anyone have any idea what's going on here, how I can troubleshoot or how I can fix the problem?
PS. I'd like to have the phone connected to my openvpn server rather than my laptop while using the hotspot as the laptop's openvpn connection is unstable when using the phone's hotspot (I do't know why).
Thanks!
I think the problem is the Gateway used by the laptop to connect to the internet. When you activate the hotspot the laptop will use to connect to the internet as gateway the ip provided by 3G. When you activate the VPN the gateway is changed but the laptop can't tell that and it uses the wrong IP address.

[Q] connect nexus5 to SSh tunneling over WiFi

I have a PC with a WiFi adapter. I use SSH tunnelling on that PC. Now I want to share my Internet connection on that PC via the WiFi card to my other device,i.e., I want a way to send traffic via SSH tunnel to WiFi, for example, create a LAN connection over SSH and then share it through WiFi.
Internet => PC => SSH tunnel => WiFi => Nexus 5
Is it possible? If so, how?

How can I share mobile data to connected wifi thru network bridge in Andoird 6.0

Hello Experts,
I am not a super expert but working on it on own interest basis.
My situation is,
I have one broadband connection thru ADSL+wireless router.
Normally my PC & other android devices at home are connected to wireless router of broadband.
Sometimes, this broadband connection fails for a couple of days.
I have one Android 6.0 mobile device which have unlimited data plan, but other android devices like mobile, Tabs does not have data connection.
During that time,
I create a hotspot & share to other wireless devices, but my PC does not connect until I connect thru USB tether.
Is it possible ??
To make a bridge in android 6.0 MM, between data connection & wi-fi ?? (I will connect it to wireless router with out hotspot), & set the DNS & gateway manually in the PC & wireless router.
What I have already done
Connected my mobile having data conn to win 10 PC with USB tether & PC is also connected to adsl router thru LAN.
Now,
I have checked the address of USB tether network IP (192.168.XX.XX), gateway (192.168.XX.XX) & DNS (192.168.XX.XX).
Then I created a bridge connection at PC between ADSL LAN & Tether Connection. Set above mentioned IP, gateway & DNS at created bridge connection.
Then I logged in into ADSL router,
Changed its IP from 192.168.1.1 to 192.168.XX.XX ( matching with USB tether conn except last digit).
Then I connected all my android devices to ADSL router wireless network & manually set the DNS address to every network same as USB tether DNS.
profit :
Not much, But I am getting a strong wifi network signal from ADSL compared to mobile hotspot & all my devices connected to internet being at different places of home with different people.
My above query was to get rid of USB tether in this situation.
Thank you for reading all above & suggestions if any.
[email protected] said:
Hello Experts,
I am not a super expert but working on it on own interest basis.
My situation is,
I have one broadband connection thru ADSL+wireless router.
Normally my PC & other android devices at home are connected to wireless router of broadband.
Sometimes, this broadband connection fails for a couple of days.
I have one Android 6.0 mobile device which have unlimited data plan, but other android devices like mobile, Tabs does not have data connection.
During that time,
I create a hotspot & share to other wireless devices, but my PC does not connect until I connect thru USB tether.
Is it possible ??
To make a bridge in android 6.0 MM, between data connection & wi-fi ?? (I will connect it to wireless router with out hotspot), & set the DNS & gateway manually in the PC & wireless router.
What I have already done
Connected my mobile having data conn to win 10 PC with USB tether & PC is also connected to adsl router thru LAN.
Now,
I have checked the address of USB tether network IP (192.168.XX.XX), gateway (192.168.XX.XX) & DNS (192.168.XX.XX).
Then I created a bridge connection at PC between ADSL LAN & Tether Connection. Set above mentioned IP, gateway & DNS at created bridge connection.
Then I logged in into ADSL router,
Changed its IP from 192.168.1.1 to 192.168.XX.XX ( matching with USB tether conn except last digit).
Then I connected all my android devices to ADSL router wireless network & manually set the DNS address to every network same as USB tether DNS.
profit :
Not much, But I am getting a strong wifi network signal from ADSL compared to mobile hotspot & all my devices connected to internet being at different places of home with different people.
My above query was to get rid of USB tether in this situation.
Thank you for reading all above & suggestions if any.
Click to expand...
Click to collapse
Yez and yes, search Hack5 in youtube and find the video relating to wifi pineapples( the bridge/router) and you will find everything you need , along with EasyTether pro(works fully tested to bypass tethering restrictions) . I dont know how the pineapple/router works but I know EasyTether uses adb to take and make a usb tethered connrection, then with a moderate-advanced setup(ie. wifi pineapple) you will be broadcasting wifi to any device you need. The only downside is you have to usb tethr to the pineapple at all timez to make a usable wifi,So in my opinikn best to buy anothr $45 a mnth plan especially 4 tethering, tho Im just now switching to a ISP for my internet it did the job, i even freelanced for awhile all remotely using the hotspot/created wifi/bridged connection.Hope that hellps brutha
Th
Tks...Bro...
I did it long before without spending a single penny.
I simply used network hack and bluffed the pc and other devices...It is working like charm....

Categories

Resources