Related
First I have seen several lists of Qi chargers for the Nexus 4
I have to ask because either I can't find them, or they were inconsistent
I heard eventually Google Orb will be out. In the meantime, Energizer Pad works (single or triple...although it looks more like double) and it can even work with a small to medium thick case like TPU
I did hear that LG pad didn't work. Then I heard it did. Then I heard it does with a whole lot of beeping
With all that, I do think I would try one, and at this point the Energizer....when you can find them. It seems Amazon did what Google eventually did. Lets you order, but says a month or so before delivery
Would you go that route. You do lose being able to easily look at the screen, like overnight
Or would you get a nice dock like I have always had
eric0668 said:
First I have seen several lists of Qi chargers for the Nexus 4
I have to ask because either I can't find them, or they were inconsistent
I heard eventually Google Orb will be out. In the meantime, Energizer Pad works (single or triple...although it looks more like double) and it can even work with a small to medium thick case like TPU
I did hear that LG pad didn't work. Then I heard it did. Then I heard it does with a whole lot of beeping
With all that, I do think I would try one, and at this point the Energizer....when you can find them. It seems Amazon did what Google eventually did. Lets you order, but says a month or so before delivery
Would you go that route. You do lose being able to easily look at the screen, like overnight
Or would you get a nice dock like I have always had
Click to expand...
Click to collapse
My first one is the Energizer. Similar to the Maxell one overseas. And I also have the LG verizon branded one, with the speaker dismantled/destroyed from beeping. To me the beeping was too loud in a relatively quiet office. They both work fine with the iBlason tpu case on. Oh and the Energizer doesn't have any audible beeps like the LG.
Warning on the Energizer. If using this charger, and you have a naked Nexus 4, the phone will slide off because the unit has a slight incline. Just use a tpu case or something like a old screen protector to grip the phone.
The LG unit works and looks better all around IMO. The footprint is smaller. The only negative is that the only way to disable the speaker is to destroy it and the phone gets a bit warmer than the Energizer.
But in the end, both do work.
kpjimmy said:
My first one is the Energizer. Similar to the Maxell one overseas. And I also have the LG verizon branded one, with the speaker dismantled/destroyed from beeping. To me the beeping was too loud in a relatively quiet office. They both work fine with the iBlason tpu case on. Oh and the Energizer doesn't have any audible beeps like the LG.
Warning on the Energizer. If using this charger, and you have a naked Nexus 4, the phone will slide off because the unit has a slight incline. Just use a tpu case or something like a old screen protector to grip the phone.
The LG unit works and looks better all around IMO. The footprint is smaller. The only negative is that the only way to disable the speaker is to destroy it and the phone gets a bit warmer than the Energizer.
But in the end, both do work.
Click to expand...
Click to collapse
Thank You for such a quick and nice reply
I am not very technical, except with phones. Why does the charger beep? And how do you disable the beep?
Thank You
eric0668 said:
Thank You for such a quick and nice reply
I am not very technical, except with phones. Why does the charger beep? And how do you disable the beep?
Thank You
Click to expand...
Click to collapse
The LG charger beeps to confirm that you placed the phone on the pad correctly. There is a visual mark as well on top of the LG unit so I preferred that and because there was no way to disable the beep unless I had to dismantle the pad and cut off the top of the speaker box and remove the silver disk under the top. In other words, there's no option to switch the beeping off.
I used this thread as reference to remove the speaker...well more like stop the beeping:
http://forum.xda-developers.com/showthread.php?t=2003137
And just to clarify, the Energizer I have is for the single unit.
I just picked up the LG unit at the local Verizon store yesterday. So far, it seems to be working perfectly. The only time it beeps is when I initially place it on the charger.
I do notice it taking longer to charge than with the stock AC charger, especially when just topping off.
I set it up on an armoire where I always drop my wallet and keys and have to admit that it is pretty cool to just drop the phone on it.
I wouldn't put my hopes in the wireless charging orb by google. I'm sure it'll be sold out in 3 minutes just like the phone.
Tyscott said:
I wouldn't put my hopes in the wireless charging orb by google. I'm sure it'll be sold out in 3 minutes just like the phone.
Click to expand...
Click to collapse
I think the orb is a mythical creature just like the nexus pogo I waited so long for. I bought the lg charger and dismantled the speaker and it works awesome. Its got good grip and works with my case on. Does get a Lil warm like the previous poster said but not to warm that it worries me.
Sent from my Nexus 4 using Tapatalk 2
I'm still waiting on my device to be shipped (and may end up picking one up locally for a small premium) but I've heard the Nokia Lumia charging plate works on/off. I have two that I got that I'll try when I receive mine and report back.
I have the Nokia DT-900 wireless charging plate intended for the Lumia 920. And let me tell you it DOES NOT work well at all. No joke, I think it sucks power out of my phone instead of putting it in. I put it on with a 64% charge and came back an hour and 25 min later and it was at 60%. In the mean time I didn't pick it up, didn't receive any notifications...nothing.
The panasonic tm101 is flat and it finds your phone where you lay it. It has a bright blue light and im not sure it can be turned off. I like it. You can cover it up but i think it is 2nd most expensive to the Oregon Scientific clock.
Sent from my Nexus 4
bass++ said:
The panasonic tm101 is flat and it finds your phone where you lay it. It has a bright blue light and im not sure it can be turned off. I like it.
Click to expand...
Click to collapse
That's cool. Does it use a motor to move the coil to find the phone? And is it available in the US?
It shipped from Japan with no english manual, purchased on ebay.
Sent from my Nexus 4
I ordered one from eBay last week, I'll post pics when it arrives.
bass++ said:
The panasonic tm101 is flat and it finds your phone where you lay it. It has a bright blue light and im not sure it can be turned off. I like it. You can cover it up but i think it is 2nd most expensive to the Oregon Scientific clock.
Sent from my Nexus 4
Click to expand...
Click to collapse
I purchased one of these and it died in a month. (The motor stopped moving)
pr0crast1nate said:
I have the Nokia DT-900 wireless charging plate intended for the Lumia 920. And let me tell you it DOES NOT work well at all. No joke, I think it sucks power out of my phone instead of putting it in. I put it on with a 64% charge and came back an hour and 25 min later and it was at 60%. In the mean time I didn't pick it up, didn't receive any notifications...nothing.
Click to expand...
Click to collapse
The only problem I have with my white Dt-900 pad is when the phone is fully charged and I take it off the charging pad then place it back on I get the intermittent charging. If the Nexus is lower then 90% all is good!
Sent from my Nexus 7 using Tapatalk 2
raider5oh said:
I purchased one of these and it died in a month. (The motor stopped moving)
Sent from my Nexus 7 using tapatalk 2
Click to expand...
Click to collapse
Mine arrived today factory sealed box, I just could not wait to use it.... And guess what @#£%&% coil won't move vertically...
I think there might be a serious quality issue with this model. So disappointed with Panasonic.:thumbdown:
Sent from my Nexus 4 using xda app-developers app
My energizer works well with my tpu case. It's fairly handy and definitely slick against the glass back.
Hello, I am a signature.
Hey guys, I bought this Nexus 4 dock on Amazon and received it today. It's specifically designed for the Nexus 4 and fits like a glove. It is currently OOS but this dock looks exactly the same and is $10 cheaper than what I paid. D'oh! The dock works with or without a case thanks to a little insert that changes the size of the dock port. I tested the dock with my Diztronic TPU case and without.
What I like about the dock:
Plain and understated design with no logos or blinky LEDs
Matches the Nexus 4 with or without case perfectly
Works with or without a case
The N4 slides onto the micro usb port with little hassle. I think this will end my attempts to put in the micro usb cable upside down in the dark before falling asleep.
Surprisingly, the speaker doesn't sound too muffled despite being covered by the dock. I was able to comfortably have a conversation over speakerphone and watched a couple YouTube videos without issue.
You can lightly tap things on the screen without it tipping over
Charging works fine thus far. You can also plug it into a computer USB port to sync stuff
Cheap, at least compared to a Qi charger
What I don't like:
You need to hold the base with one hand to pull out the N4. It's made out of hollow plastic. A heavier, more solid feel would be nice, but the base would probably have to be made out of iron to slide out the N4 with one hand.
Included USB cable is short, around 3 feet long
Included wall charger works, but looks and feels cheap. I just plugged in my OEM charger instead
Here's a flickr set of some additional pics I took of the dock.
I'd highly recommend this little guy. IMO, current Qi chargers aren't worth the high cost for the extra convenience they provide. This dock strikes a better balance of convenience and price, and doesn't scrap too much on quality where it counts.
Looks decent. I had something similar for my old Evo. Be interesting to compare to the new Orb one. I just like the idea of magnets doing the work and not worrying about misalignment of the usb port.
ryan stewart said:
Looks decent. I had something similar for my old Evo. Be interesting to compare to the new Orb one. I just like the idea of magnets doing the work and not worrying about misalignment of the usb port.
Click to expand...
Click to collapse
Agreed, the orb charger looks ideal. That said, I don't think that this dock will hurt my micro usb connector - I can dock it with far less fuss than connecting the wire manually. But maybe that's just me and my poor hand-eye coordination. :highfive:
This looks ideal. Does anyone have a link to order one from Hong Kong? I have much better luck ordering from there to Canada than I do from the US...
Not sure if this is the same dock, but looks almost identical: http://www.ebay.co.uk/itm/KiDiGi-Ne...520772?pt=PDA_Accessories&hash=item2327426fc4
A question to the OP, I noticed from your pics that you were able to use the dock whilst the Nexus was in a Distronic case...was this a comfortable fit? I have bought the Ringke Fusion which is similar in shape to the case you're using.
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
Snowflake6 said:
This looks ideal. Does anyone have a link to order one from Hong Kong? I have much better luck ordering from there to Canada than I do from the US...
Click to expand...
Click to collapse
Here's yet another dock..this one from Hong Kong:
http://www.ebay.co.uk/itm/NEW-Kula-...309545?pt=PDA_Accessories&hash=item2c6b8304a9
esskayy said:
Not sure if this is the same dock, but looks almost identical: http://www.ebay.co.uk/itm/KiDiGi-Ne...520772?pt=PDA_Accessories&hash=item2327426fc4
A question to the OP, I noticed from your pics that you were able to use the dock whilst the Nexus was in a Distronic case...was this a comfortable fit? I have bought the Ringke Fusion which is similar in shape to the case you're using.
Click to expand...
Click to collapse
Yep, the Diztronic case fit perfectly. Not too snug, not too loose. The phone slides down to the USB connector just by gravity alone. You then push the phone down a little and it locks in.
Sent from my Nexus 7 using xda premium
Do you think it would work with the official bumper?
Sent from my Nexus 4 using xda app-developers app
rmgill said:
Yep, the Diztronic case fit perfectly. Not too snug, not too loose. The phone slides down to the USB connector just by gravity alone. You then push the phone down a little and it locks in.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Good to know, thanks!
shrapnelx said:
Do you think it would work with the official bumper?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I know that the bumper is a little thicker than most TPU cases so I doubt it. The fit with the TPU case is pretty close.
Sent from my Nexus 4 using xda premium
I own 2 of the RND docks, one for an HTC Inspire and one for the Galaxy Note. I went to buy one for the Nexus 4 but it was out of stock then Google had the Orb so I ordered that instead (a lot more expensive but I need to keep the phone for 2 years at least so might as well enjoy it). I really do like these docks, they are very easy to drop your phone into, holds it at a very nice angle and I have never worried about damaging my USB port with it (unlike the Samsung Car Dock which always worried me).
I may still buy one of these for travel as they are small and seem to pack up well. I cant speak to this one specifically as I don't own it but if it is anything like the other two I have it is a very well build product. The one thing that has me a bit concerned is the statement about the cables. The cable they shipped with the old ones were definitely not short, I use one in my bedroom and it is about 6' long. They used to ship a long charge only cable and a shorter data cable, maybe they stopped doing that.
@rmgill Just wanted to thank you again for the recommendation. I bought the cheaper version you linked to in the OP and it appears to be the same as the more expensive one you bought. Very nice dock and killer price. Unfortunately, they're out of stock or I'd pick up another one for my desk at work.
I have a Ringke slim case on it and it slides into the dock with just the right amount of tension. Doesn't feel flimsy or particularly cheap and the back supports it well enough that I don't worry about the microUSB port getting damaged. Definitely recommend it.
Sent from my Nexus 7
mercado79 said:
@rmgill Just wanted to thank you again for the recommendation. I bought the cheaper version you linked to in the OP and it appears to be the same as the more expensive one you bought. Very nice dock and killer price. Unfortunately, they're out of stock or I'd pick up another one for my desk at work.
I have a Ringke slim case on it and it slides into the dock with just the right amount of tension. Doesn't feel flimsy or particularly cheap and the back supports it well enough that I don't worry about the microUSB port getting damaged. Definitely recommend it.
Sent from my Nexus 7
Click to expand...
Click to collapse
No problem, glad you're enjoying it! I'm planning on purchasing another for my desk as well within the next month.
I Bought my mom a Galaxy S3 and the otterbox case and I like how it covers the USB port to prevent dirt from getting into it.
My question is, is there something like that for the Nexus 4, I have the nexus 3 and it's gotten the always charging indicator and the power level is kind of out there (showed 43% for a couple hours popped the batter out and back in and it was at 11% instantly) so I am getting ready for a nexus 4 but want a case that will cover it since the only time I need it exposed is when it's charging. (also help full if it supports a larger battery not a deal breaker though).
I've tried searching but all of them I can find has the USB port exposed or what looks like it is exposed
Traiklin said:
I Bought my mom a Galaxy S3 and the otterbox case and I like how it covers the USB port to prevent dirt from getting into it.
My question is, is there something like that for the Nexus 4, I have the nexus 3 and it's gotten the always charging indicator and the power level is kind of out there (showed 43% for a couple hours popped the batter out and back in and it was at 11% instantly) so I am getting ready for a nexus 4 but want a case that will cover it since the only time I need it exposed is when it's charging. (also help full if it supports a larger battery not a deal breaker though).
I've tried searching but all of them I can find has the USB port exposed or what looks like it is exposed
Click to expand...
Click to collapse
I'm not sure you'll ever be able to get a larger battery, so there are no cases to support them.
I, too, have never seen one that covers the USB port. I'd think that might be a more common request thanks to wireless charging.
Sent from my Nexus 4
You can find the little rubber USB and headphone plugs on eBay.
http://www.ebay.co.uk/itm/3-5mm-Aud..._MobilePhonesCasesPouches&hash=item3371bbab12
Might get one myself, wireless charging means the port doesn't get used as much as previous phones.
Rusty! said:
Might get one myself, wireless charging means the port doesn't get used as much as previous phones.
Click to expand...
Click to collapse
oh cool, I didn't think they sold just the cover by itself I thought I had to find a whole case for them.
While my Nexus 4 is still on the order queue, I'm looking for a case. Not sure yet.
I'm currently looking at the Rearth Ringke Fusion, Mecury TPU, and the Cruzerlite Bugdroid Circuit TPU.
A bumper with port covers too!
I'm keeping my eyes peeled for a a protective bumper with micro usb and earphone port covers. I use wireless charging and bluetooth earphones and seldom use those ports.
The separate plugs look kinda cool except for the fact that I would have two little extra pieces of plastic/rubber to keep track of, ugh.
Search eBay for " Black Rugged Hybrid Hard Case Belt Clip Holster Kickstand Google LG Nexus 4 E960 ".. Covers earphone jack and USB port.. Be warned though, this case has a toxic odor that doesn't go away for like a week or 2.
Sent from my Nexus 4 using xda app-developers app
Rusty! said:
http://www.ebay.co.uk/itm/3-5mm-Aud..._MobilePhonesCasesPouches&hash=item3371bbab12
Might get one myself, wireless charging means the port doesn't get used as much as previous phones.
Click to expand...
Click to collapse
I've had about 5 of those now. They always fall out when I'm putting it in my coat pocket. For the USB port at least.
PcFish said:
I've had about 5 of those now. They always fall out when I'm putting it in my coat pocket. For the USB port at least.
Click to expand...
Click to collapse
Was about to order one until you said this. None of them are good?
Just out of curiosity before I get one, does anybody know if the wireless charging orb will work when I have the Seidio Active Case on my N4? Or does it have to be naked?
Thanks
I'd be worried about the way the conduction heating would affect the metal kickstand - which, AFAIK, is the only N4 model available.
I'm currently using it right now with no problem. Charges all the way, don't need to put it a certain way, just drop and go.
Kid Poker said:
I'm currently using it right now with no problem. Charges all the way, don't need to put it a certain way, just drop and go.
Click to expand...
Click to collapse
Does it get really hot?
Sent from my Nexus 4 using Tapatalk 2
Wireless charging with or without the case makes the phone warm. I noticed no difference in temperature with or without my case. Case works fine with charger.
just to inform you guys, any slider case will scratch the phone. and it scratched my pretty baby. Not that bad, a scuff at the chrome frame. but I just feel very sad I didn't feel like that with my iphone 4 for some reason the metallic frame got scratched pretty bad but I didn't care lol.. our Nex 4 is a true beauty baby
Need a wireless charger for my GS6, thanks.
I've had this PowerBot for a while and it works fine. Price varies a bit depending on the color your want. It may not be the fastest, but I'm OK with that as it does not get the phone too hot either.
tomatoguy said:
Need a wireless charger for my GS6, thanks.
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B00JA7HNZO?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I bought one of these based on comments on XDA, and bought two more after confirming that it is excellent. Each unit has 3 coils, so it reliably charges the phone in numerous different positions. It is grippy on both the top and bottom, so it snuggly holds the phone and stays securely on the table-top. It is small, but not too small -- the width is the same width of the phone and the length is about 75% of the phone's length. I always place my phone flush on the surface with the camera bump hanging off the top of the charger, and it charges beautifully. Finally, it causes no considerable heat and no whine or noise of any kind.
A couple things to note: (1) It does not come with a USB wall wart. It only has the charging pad and a micro-usb cable. (2) It does not work with Samsung's fast charging USB wall wart (not sure why). (3) There is a blue LED that lights up when it's activated, which might bother some people (I've covered mine with electrical tape).
What's wrong with the suggestions in the other threads?
@eyc, I'm using a metal bumper case, does it still work with the case on?
BTW, it looks just like what I want, simple and attractive.
tomatoguy said:
@eyc, I'm using a metal bumper case, does it still work with the case on?
BTW, it looks just like what I want, simple and attractive.
Click to expand...
Click to collapse
I couldn't tell you because I haven't tried...and I don't have a metal case to test it. My wife has an S6 with a thin silicone case and, as you would expect, it works perfectly fine with that. I have an S6-edge, and I keep it bare. While I don't have personal experience with a metal bumper case, I can only speculate that this charger will work as good as the best in light of the 3 coil system. Good luck.
it looks just like what I want
Someone else made a thread about this: http://forum.xda-developers.com/galaxy-s6/accessories/best-wireless-charger-galaxy-s6-t3101501
I personally have the official one from Samsung. Works fine and haven't had issues with it. Use it for both S6 and S3 (yeah, I still use it as my media player when I'm at home, so I'm not eating up battery on the S6)
http://www.ebay.com/itm/For-Samsung-Galaxy-S6-S6-Edge-Qi-Wireless-Charger-Charging-Pad-New-/131518787500?pt=LH_DefaultDomain_0&var=&hash=item1e9f216facI have this one!!!! Looks exactly like the SAMSUNG OEM charger and works just as great!!! It lights up as well!! PLUS IT SHIPS FROM USA AS WELL...
http://www.ebay.com/itm/For-Samsung...t=LH_DefaultDomain_0&var=&hash=item1e9f216fac
Daniel323la said:
http://www.ebay.com/itm/For-Samsung-Galaxy-S6-S6-Edge-Qi-Wireless-Charger-Charging-Pad-New-/131518787500?pt=LH_DefaultDomain_0&var=&hash=item1e9f216facI have this one!!!! Looks exactly like the SAMSUNG OEM charger and works just as great!!! It lights up as well!! PLUS IT SHIPS FROM USA AS WELL...
http://www.ebay.com/itm/For-Samsung...t=LH_DefaultDomain_0&var=&hash=item1e9f216fac
Click to expand...
Click to collapse
It looks nice, what case are you using? I have a metal bumper case, do you have a metal case to test for me? Thanks, dude.:laugh::laugh::laugh:
@Daniel323la, Hey, guys, actually I have bought one from ebay , I just used the link shared by Daniel323la, thanks dude.
The shipping is amazing, it came this afternoon. One pic for you, BTW , this charger work with my metal bumper case perfectly, and you can't beat the price at this quality.
tomatoguy said:
@Daniel323la, Hey, guys, actually I have bought one from ebay , I just used the link shared by Daniel323la, thanks dude.
The shipping is amazing, it came this afternoon. One pic for you, BTW , this charger work with my metal bumper case perfectly, and you can't beat the price at this quality.
Click to expand...
Click to collapse
Forgot the pic. Here it goes. It will flash blue light once you connect it to the power, and it will only flash one time to indicate that the power is on and no other led light at all, so it won't disturb you even put it in your bedroom, love it so much.
:laugh::laugh::laugh::laugh::laugh:
I'm glad you like it bud!
eyc said:
http://www.amazon.com/gp/product/B00JA7HNZO?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I bought one of these based on comments on XDA, and bought two more after confirming that it is excellent. Each unit has 3 coils, so it reliably charges the phone in numerous different positions. It is grippy on both the top and bottom, so it snuggly holds the phone and stays securely on the table-top. It is small, but not too small -- the width is the same width of the phone and the length is about 75% of the phone's length. I always place my phone flush on the surface with the camera bump hanging off the top of the charger, and it charges beautifully. Finally, it causes no considerable heat and no whine or noise of any kind.
A couple things to note: (1) It does not come with a USB wall wart. It only has the charging pad and a micro-usb cable. (2) It does not work with Samsung's fast charging USB wall wart (not sure why). (3) There is a blue LED that lights up when it's activated, which might bother some people (I've covered mine with electrical tape).
Click to expand...
Click to collapse
I have this one as well, I agree is is excellent, I had a spare HTC 2 Amp charger plug that works great with this wireless charger. This charger gives off very little heat and charges fine through my Otterbox case.
tomatoguy said:
@eyc, I'm using a metal bumper case, does it still work with the case on?
BTW, it looks just like what I want, simple and attractive.
Click to expand...
Click to collapse
I tried the metal "Platinum" cases from BestBuy and none of my 4 Qi chargers could charge through it. The metal definitely seems to interfere.
EDIT: When you say "metal bumper", do you mean only the edge is metal, like the Spigen Hybrid Pro? If so then of course that metal would NOT interfere.
snake2332 said:
I tried the metal "Platinum" cases from BestBuy and none of my 4 Qi chargers could charge through it. The metal definitely seems to interfere.
EDIT: When you say "metal bumper", do you mean only the edge is metal, like the Spigen Hybrid Pro? If so then of course that metal would NOT interfere.
Click to expand...
Click to collapse
Yes, that's what I mean. I don't have a full metal case to test for you, sorry can't help you.
This charger works very good so far, It charges very fast even with a tpu case on.
tomatoguy said:
Forgot the pic. Here it goes. It will flash blue light once you connect it to the power, and it will only flash one time to indicate that the power is on and no other led light at all, so it won't disturb you even put it in your bedroom, love it so much.
:laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
http://www.ebay.co.uk/itm/201363984261?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I bought this one from ebay in the UK thinking it would be the same, but it has 4 bright blue LEDs that are lit constantly when in use. Returning it now.
xgraphy said:
http://www.ebay.co.uk/itm/201363984261?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I bought this one from ebay in the UK thinking it would be the same, but it has 4 bright blue LEDs that are lit constantly when in use. Returning it now.
Click to expand...
Click to collapse
What a pity, someone likes leds, it can indicate you while charging, but if you want to use it in bedroom, no light will be better. The charger I bought only
ship to us and Canada:crying:
You can choose the 3 coil based wireless charger by CHOETECH as I am using it from last 1 month without facing any problem. There is no need for alignment as the Galaxy S6 starts charging when it gets in contact with any of these 3 coils. I bought it from Amazon: http://www.amazon.com/dp/B00JA7HNZO/