Related
Does anyone know how to solve this? Because my Moto g is not qualified to unlock bootloader? someone managed to solve this?
Next time buy unbranded?
Sent from Sauwny the TL
Durteedee said:
Next time buy unbranded?
Sent from Sauwny the TL
Click to expand...
Click to collapse
My Moto G is the operator Claro
Wait, did you try unlocking or do you just think its not unlockable?
https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth
go here and check if yours is really unlockable or not? (only sure way to know)
Make sure that you have entered the code properly
Sent from my Moto G using xda app-developers app
i don't know if operator device lock allow u to unlock the bootloader or not but if it is okey after you get the code from ADB don't copy that!! instead of that enter the code manual and type it on keyboard this is my expreince that works fine for me,hope works for u too.
I already went there on the Motorola website and not of
Remove all spaces in between
Sent from my XT1033 using xda app-developers app
I faced same issue try unlink your device from moto services wait for atleast 12hrs then...try unlocking again!
it worked for me!
I had exchanged for a retail stock rom a few days ago, but still get an error
So I will not be able to install CM11: (good if had a rom that already come with unlocked bootloader, root, cwm
i also bought my moto g from claro and i unlocked it without problems, i heard of a guy with the same problem, his device was defective
spanish: yo tambien compre mi moto g en claro y lo pude desbloquear sin problemas, escuche de un tipo con el mismo problema, su telefono estaba defectuoso
Gonzanob said:
i also bought my moto g from claro and i unlocked it without problems, i heard of a guy with the same problem, his device was defective
spanish: yo tambien compre mi moto g en claro y lo pude desbloquear sin problemas, escuche de un tipo con el mismo problema, su telefono estaba defectuoso
Click to expand...
Click to collapse
Me and my friend bought at the same store the two of course, and they do not give to unlock
The first time i tried to unlock my bootloaders i also got that response that is unlockable. But then i tried couple off times, and i think that the third time was successful.
Did u tick the I agree to be bound by the terms of the legal agreement on the bottom of the page first and then click if your device can be unlocked?
this is my code, do not know why It's impossible to unlock, wanted to test the CM11, when I had the L7 was even easier to unlock the boot
3A45890945149233#3034323331313931303400585431303333000000#12DBFC8932562B4C1138B310AE39D9959BD3EDF9#EA3EB2010F0000000000000000000000
NikolasG. said:
this is my code, do not know why It's impossible to unlock, wanted to test the CM11, when I had the L7 was even easier to unlock the boot
3A45890945149233#3034323331313931303400585431303333000000#12DBFC8932562B4C1138B310AE39D9959BD3EDF9#EA3EB2010F0000000000000000000000
Click to expand...
Click to collapse
Remove the spaces and retry.
I've removed the spaces
Yup, tried with your code and it didn't work, cross checked with my own string and the no. of chars and everything else matches. How did you copy this code from command prompt? Use right click, mark, select the text, right click title bar,copy so that you have no errors rather than manually copying. If it isnt human error and that is the right code, I guess you really can't unlock this one.
I think my Moto G is rotten
3A55000495394616#5441393333303056314F00585431303333000000#F3096BB5A8EA61F8509E51CFDCC6CDEBE1403E91#B86CC3020F0000000000000000000000
thats my code.. i can not unlock
Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
cmon guys, help out this man, so that he can continue to help us with new firmware updates
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
I did it with a L29 device. The app says Device is in recovery mode, and once I clicked next, It says your device is not supported for system recovery. Please take your device to a nearby huawei service center.
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
M.Noury said:
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
I wish that I could do that, but there are partitions that I can't flash with fastboot, which I did flash using other means when reverse engineering the updates. Those are the partitions which are broken and don't allow my phone to boot, or show anything on the screen for that matter.
There is a restore mechanism built into Huawei's fastboot to get into a separate restore mode, but I think there is a special recovery image needed which the Huawei Hisuite app can access. I just don't know how to find it when all the devices come back as unsupported, despite being shown as supported in the documentation. It's very strange.
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
bluheart said:
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
Click to expand...
Click to collapse
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
duraaraa said:
Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
Click to expand...
Click to collapse
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
rom stock l09c212b120
danywalkert said:
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
Click to expand...
Click to collapse
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Sorry amigo, only english is allowed in this forum.
alangastic said:
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Click to expand...
Click to collapse
Hi there, sorry for taking this long, didnt realize I had a message on this thread, hopefuly you already fixed your situation, if not, let me know, for sure I can help.
Saludos.
Hola resulta que tengo un dispositivo samsung galaxy s6 flat de la compañia T-Mobile a este telefono lo deje en un local de reparación de teléfono para que liberen la banda y así utilizarla con cualquier SIM.
Liberaron el telefono y todo andaba muy bien, pero a eso de un mes me encontraba pasandome via USB unos archivos para un proyecto de mi universidad pesaban esos archivos como 5gb por lo que lo deje conectado y mientras conversaba, entonces vi que me salio una notificación de que se ah retirado la SIM y me apararecia el boton de reiniciar y pues espere que se pasen todos los archivo y lo reinicie, y no me detectaba la SIM por lo que ahora voy a intentar flashear mi teléfono con ODIN pero me sale Sw rev. Check fail. Device: 6, binary 5 y no se que significa ese error. alguien que me ayude porfavor
Descarga el Firmware mas nuevo para tu modelo desde sammobile, la version que intentas flashear (5) es anterior al Bootloader que tiene tu telefono (6) por eso no te lo permite.
Hello! I have exactly the same problem, I get the following error when trying to flash fw.
"Sw rev. Check fail. Device: 6, binary 5".
Did you solve it? If yes, can you post the link to the firmware?
Thanks in advance.
Vincenzo.
You can't downgrade from bit6. Flash any version of firmware 7.0 bit 6 (like g920fxxu6...)
i have the sam problem ..can any one post tutorial how to fix Sw rev. Check fail. Device: 6, binary 5 pleaseeeee
virtualfish said:
Hello! I have exactly the same problem, I get the following error when trying to flash fw.
"Sw rev. Check fail. Device: 6, binary 5".
Did you solve it? If yes, can you post the link to the firmware?
Thanks in advance.
Vincenzo.
Click to expand...
Click to collapse
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
archyshabo said:
i have the sam problem ..can any one post tutorial how to fix Sw rev. Check fail. Device: 6, binary 5 pleaseeeee
Click to expand...
Click to collapse
did u fix it
kaddonat said:
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
did u fix it
Click to expand...
Click to collapse
so uhm, basically i solved, or at least i hope, downloading a firmwware that in the name include a v6. practically my phone flashed correctly, but even now i have the same problem as before, phone stuck in bootloop, and no recovery. Only download, but it seems without any meaning at this point (for me at least)
t6yr said:
so uhm, basically i solved, or at least i hope, downloading a firmwware that in the name include a v6. practically my phone flashed correctly, but even now i have the same problem as before, phone stuck in bootloop, and no recovery. Only download, but it seems without any meaning at this point (for me at least)
Click to expand...
Click to collapse
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
unfortunately i haven't find a working method; BUT a way i found that can solve the problem is to wait until some dev. come out with some progress. Non the less the knoxx it's a safety feature implemented to prevent data leaking (i think this is the purpose), and to prevent it the must had put on it some work on it to prevent whoever might be to modify the phone data/software.
ps. just today watching a yt video guess what was the ad about. Samsung security knoxx :crying:
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
anyway since your device is still in rev 5 it's possible some work. You must find a rev 5 "problem solver" firmware. I've encountered some searching for a rev 6, but it cannot be downgraded so im stuck, maybe it can be your lucky day:good:
kaddonat said:
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
did u fix it
Click to expand...
Click to collapse
the issue in this thread is that the OP is trying to flash a revision 5 bootloader firmware set on a phone that has already had the revision 6 version installed. you cannot go backwards in bootloader versions. go to sammobile.com/firmware and get the a firmware set with the same or higher bootloader version and you should be fine
Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
did you ever manually flash firmware with Odin on your phone? Did you buy it new?
t6yr said:
unfortunately i haven't find a working method; BUT a way i found that can solve the problem is to wait until some dev. come out with some progress. Non the less the knoxx it's a safety feature implemented to prevent data leaking (i think this is the purpose), and to prevent it the must had put on it some work on it to prevent whoever might be to modify the phone data/software.
ps. just today watching a yt video guess what was the ad about. Samsung security knoxx :crying:
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
anyway since your device is still in rev 5 it's possible some work. You must find a rev 5 "problem solver" firmware. I've encountered some searching for a rev 6, but it cannot be downgraded so im stuck, maybe it can be your lucky day:good:
Click to expand...
Click to collapse
the term youre looking for is "engineering bootloader", not trying to split hairs, just throw the correct term out there for yall
hi i have that issue but on my s8+
i made an attempt at rooting it and is stuck on only official binaries are allowed to be flashed
i have tried to download the firmware and flash it but it fails everytime i have tried.
any ideas
How to find bootloader ver.
How do I find the bootloader version and know which version needed from phone to sammobil? Same problem Dev:6 Bin:5 no bootloader,twrp. Just Odin download mode.
Product name SM-G925T
Current Binary: Samsung Official
System Status: Custom
FRP Lock: OFF
Secure Download: Enabled
Knox Warranty Void: 1 (0x030c)
RP or AP SWREV is B:6 K:3 S:4
Sw Rev. Check fail Device: 6 Binary 5
QUOTE=Youdoofus;80548785]the issue in this thread is that the OP is trying to flash a revision 5 bootloader firmware set on a phone that has already had the revision 6 version installed. you cannot go backwards in bootloader versions. go to sammobile.com/firmware and get the a firmware set with the same or higher bootloader version and you should be fine
did you ever manually flash firmware with Odin on your phone? Did you buy it new?
the term youre looking for is "engineering bootloader", not trying to split hairs, just throw the correct term out there for yall[/QUOTE]
Basically, all the ROMs I've found and used on my cell phone
According to Nokia support, all variants are the same, only the supported SIMs vary
So
Support Variant: TA-1028, TA-1038, TA-1032, TA-1020 (Theoretically)
Tested only on TA-1028
some are for mounting with SP tools, and others through the option Update From SDcard, in the recovery
And one for OSTLA(to recover bricks)
>>>OSTLA<<<
OSTLA Software
Version: 7.1
NE1-215H-0-00WW-B02.nb0
>>>SPTools<<<
SPTools(DA Included)
Version: 7.1(2.15H)December 2017
NE1-215H-0-00WW-B02
Version: 8.0(3.380) July 2018
NE1-3380-0-00WW-B01
Version: 8.1(4.42D) December 2018
NE1-442D-0-00WW-B01
>>>RECOVERY<<<
Version: 8.1(4.43E) May 2019
NE1-443E-0-00WW-B01(update)
Version: 9.0(5.120) May 2019
NE1-5120-0-00WW-B01(update)
all SPTool version they have their scatter inside
P.D:I am not an English speaker, so if you notice that everything is misread, it is to translate
Thanks
Thank you I'll try those stock rom on my hard brick Nokia 1028.. any other rom with ost (no working just connect your phone at the bottom) or flash tool works.. (flash tool ask for auth file)
Can't find tool
Can you upload all the tools you used? I can't find a working one
Upload a working driver too
tadpole975 said:
Thank you I'll try those stock rom on my hard brick Nokia 1028.. any other rom with ost (no working just connect your phone at the bottom) or flash tool works.. (flash tool ask for auth file)
Click to expand...
Click to collapse
Normally, when you request AUTH file, it is because you are using the wrong button combination, or you have not selected the correct download-agent
xuanhaivptthn said:
Can you upload all the tools you used? I can't find a working one
Upload a working driver too
Click to expand...
Click to collapse
added files.
DA included in the sptools folder.
The drivers you can use are in the OSTLA folder
djxpro said:
added files.
DA included in the sptools folder.
The drivers you can use are in the OSTLA folder
Click to expand...
Click to collapse
Thanks!
Anyways, my friend had a Nokia 3 TA-1032 on Android 9 lasted security build (i dont remember that) but he was trying to unlock bootloader. There are some tutorials on how to do that, but they all using Android 7 and/or Android 8.1 so he used SP Flash Tool to downgrade to Android 7 and now his phone is bricked. Do you have any idea on how to fix his phone?
---------- Post added at 12:52 PM ---------- Previous post was at 12:46 PM ----------
Extra information, after flashing his phone using SP Flash Tool, the phone won't turn on, it just keep vibrating, like bootloop. So he formatted whole flash using SP Flash Tool, he thought that he can just format and flash again like with Windows, but now it doesn't even vibrate
xuanhaivptthn said:
Thanks!
Anyways, my friend had a Nokia 3 TA-1032 on Android 9 lasted security build (i dont remember that) but he was trying to unlock bootloader. There are some tutorials on how to do that, but they all using Android 7 and/or Android 8.1 so he used SP Flash Tool to downgrade to Android 7 and now his phone is bricked. Do you have any idea on how to fix his phone?
---------- Post added at 12:52 PM ---------- Previous post was at 12:46 PM ----------
Extra information, after flashing his phone using SP Flash Tool, the phone won't turn on, it just keep vibrating, like bootloop. So he formatted whole flash using SP Flash Tool, he thought that he can just format and flash again like with Windows, but now it doesn't even vibrate
Click to expand...
Click to collapse
use OSTLA (ROM Android 7.1), if it works on the first try, fine.
If the process fails (after flashing the bootloader, according to the application states), try again with sptools (Rom 7.1).
if it doesn't work either, try ROM 8.0 with sptools
I went through a lot of bricks, and managed to fix them trying anyway. Just try until you turn on.
in this same forum, there is the correct way to unlock the bootloader in android 9, since what changes are the commands to use in the ADB
djxpro said:
use OSTLA (ROM Android 7.1), if it works on the first try, fine.
If the process fails (after flashing the bootloader, according to the application states), try again with sptools (Rom 7.1).
if it doesn't work either, try ROM 8.0 with sptools
I went through a lot of bricks, and managed to fix them trying anyway. Just try until you turn on.
in this same forum, there is the correct way to unlock the bootloader in android 9, since what changes are the commands to use in the ADB
Click to expand...
Click to collapse
OSTLA doesn't recognize his phone, but I read online that SP Tools only works if the bootloader has been unlocked so...?
I will try those ROM anyways
Download miracle thunder from this link https://androidfilehost.com/?fid=11410963190603915389 Now Install in your pc click on write button and select scatter file (Android 7.1 ROM) you can see there is universal written just click on that and select Nokia 3...Now click on start button and connect your phone press volume up down button to detect your device and it will definitely unbrick your phone after that you need to write your IMEI cause previously you done with format all + download this will delete entire emmc partition nvram...
Thanks me later it will work?
To unlock bootloader of NOKIA 3 in Android pie 9.0 follow my thread I wrote the instructions ????
https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
Sent from my NE1 using XDA Labs
Arin59 said:
Download miracle thunder from this link https://androidfilehost.com/?fid=11410963190603915389 Now Install in your pc click on write button and select scatter file (Android 7.1 ROM) you can see there is universal written just click on that and select Nokia 3...Now click on start button and connect your phone press volume up down button to detect your device and it will definitely unbrick your phone after that you need to write your IMEI cause previously you done with format all + download this will delete entire emmc partition nvram...
Thanks me later it will work
To unlock bootloader of NOKIA 3 in Android pie 9.0 follow my thread I wrote the instructions ??
https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
Sent from my NE1 using XDA Labs
Click to expand...
Click to collapse
Doesn't work. Any ideas?
Gracias hermano, sucede que instale una ROM sin estar desbloqueado mi telefono, ni el blootloader, asi que me quedo en la pantalla de recovery y de ahi no pasaba, me descargue el recovery que dejaste, lo instale desde la SD y recupere el sistema, ahora si puede desbloquear el cargador de inicio de manera correcta y todo quedo solucionado.
MIL GRACIAS EN VERDAD PROBÉ DE TODO Y ESTE FUE EL ÚNICO QUE ME FUNCIONO, DIOS TE BENDIGA.
Kofseven said:
Gracias hermano, sucede que instale una ROM sin estar desbloqueado mi telefono, ni el blootloader, asi que me quedo en la pantalla de recovery y de ahi no pasaba, me descargue el recovery que dejaste, lo instale desde la SD y recupere el sistema, ahora si puede desbloquear el cargador de inicio de manera correcta y todo quedo solucionado.
MIL GRACIAS EN VERDAD PROBÉ DE TODO Y ESTE FUE EL ÚNICO QUE ME FUNCIONO, DIOS TE BENDIGA.
Click to expand...
Click to collapse
acabo de ver estos msg viejo, estuve fuera mucho tiempo por culpa del trabajo.
genial que hayas podido arreglarlo.
es bueno ser de ayuda D:
I hope someone can make a tutorial to unlock BL and get root permission。So that people can better use the black shark mobile phone
ÿeah, me too
......
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法，但他们不会免费共享信息！
----------
MOD EDIT: English Translation Below
The Chinese have successfully tested the same unlocking method as the "Black Shark 3" series, but they will not share information for free!
Click to expand...
Click to collapse
I feel sad.
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法，但他们不会免费共享信息！
----------
MOD EDIT: English Translation Below
The Chinese have successfully tested the same unlocking method as the "Black Shark 3" series, but they will not share information for free!
Click to expand...
Click to collapse
Well is it the same way and files? If it works like the black shark 3. I think you would need a different twrp but it should work the same.
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法，但他们不会免费共享信息！
Click to expand...
Click to collapse
It's actually free, but you didn't find it
求教程
http://www.viprom.cn/list/6706.html Here's the black shark 3 unlock tutorial
没有人一样，这手机只在国内发了吧？
ZaneCode6574 said:
没有人一样，这手机只在国内发了吧？好像是···
Click to expand...
Click to collapse
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Jbazt_katuforzs said:
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Click to expand...
Click to collapse
Personally I don't need sources, but just TWRP to debloat. I would be fine with the regular ROM
I just use this phone for gaming like if it was a videoconsole, for customizing I have my POCO F1 as my daily driver.
anyone who tried this?
How to Root Xiaomi Black Shark 4 – Two Working Methods!
In this guide, I will show you how to root Xiaomi Black Shark 4 using magisk. Because in this article we will share with you working method.
magiskupdate.com
migsymigs said:
anyone who tried this?
How to Root Xiaomi Black Shark 4 – Two Working Methods!
In this guide, I will show you how to root Xiaomi Black Shark 4 using magisk. Because in this article we will share with you working method.
magiskupdate.com
Click to expand...
Click to collapse
That is a useless placeholder site, that just uses each brand and model and sets the exact same page for the effect
They say "download the latest TWRP from twrp.me" but obviously, there is not TWRP for Black Shark 4 yet (and I have my doubts it will ever be since generally Black Shark phones have been mostly disregarded in terms of development since core kernels are never released)
Let's see how it goes.
aa2994576 said:
I hope someone can make a tutorial to unlock BL and get root permission。So that people can better use the black shark mobile phone
Click to expand...
Click to collapse
You need a modified firehose to flash in edl to unlock BL. Google helps on how to do this
The method isn't even "chinese" but from qualcomm (basically for oem's).
Jbazt_katuforzs said:
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Click to expand...
Click to collapse
Well most youtubers (especially those reviewing 100000$ phones) get those phones from oems and oem's dont like the custom rom development--> they will just cut the free phones for the reviewers (kinda like Nvidia tried with hardware unboxed). Also those reviewers probably cant even install a custom rom....
MiSSigNNo said:
Personally I don't need sources, but just TWRP to debloat. I would be fine with the regular ROM
I just use this phone for gaming like if it was a videoconsole, for customizing I have my POCO F1 as my daily driver.
Click to expand...
Click to collapse
Don't debloat a phone without any possibilities of getting back a working stock rom from oem with TWRP (also debloating in TWRP on a phone with super partition will break everything, leaving u with a 700 bucks paper weight) use magisk and system app debloater (if sth goes wrong disable module/root and you are back to stock)
Do you feel save with a recovery (which can easily be modified to always have access to everything u do on the phone) without any sources and from some shady chinese guy who wants to make money with it? He could just remotely lock your phone and make you pay to get the unlock token... and then do it again xD
With kernel sources you will also get a working and propper TWRP recovery, without you will always be bound to stock kernel (which you cant update bcs blackshark doesn't supply stock roms/doesn't update rooted phones) at least...
wertus33333 said:
You need a modified firehose to flash in edl to unlock BL. Google helps on how to do this
Click to expand...
Click to collapse
Can you elaborate on this? I have not found anything relevant regarding this topic
MiSSigNNo said:
Can you elaborate on this? I have not found anything relevant regarding this topic
Click to expand...
Click to collapse
https://github.com/Naveen3Singh/BLUnlocker but bs does not have official stock firmware downloads... so wait for a mayor (android) update until you update your phone to get the update download link using adb
Compré la versión china de Black Shark 4 y no la versión global, el problema que lo hace va fatal, el GPS no funciona bien, los servicios de google tampoco, ¿hay alguna forma de pasar la rom china a la rom global? No he encontrado una forma en ninguna página todavía, si alguien pudiera ayudarme con esto lo agradecería, o al menos alguien que me enseñe cómo erradicar los servicios de Google o cuál es la mejor manera para que funcionen No es necesario root o instalar twrp porque hasta ahora es imposible
Español
Compré la versión china de Black Shark 4 y no la versión global, el problema que lo hace va fatal, el GPS no funciona bien, los servicios de google tampoco, ¿hay alguna forma de pasar la rom china a la rom global? No he encontrado una forma en ninguna página todavía, si alguien pudiera ayudarme con esto lo agradecería, o al menos alguien que me enseñe erradicar los servicios de Google o cuál es la mejor manera para que funcionen sin necesidad de ser root o instalar twrp porque hasta ahora es imposible