i rooted my Samsung Galaxy Quattro i8552 yesterday by installing cwm(miracuously i tell you) but after i started phone the cwm got erased and stock recovery got rewritten, so now i have stock recovery. I installed lcd modder and changed the dpi and it said restart and since then phone is not starting. I can goto recovery and download mode and i started adb and deleted the build.prop file from /system. now i cant push it also. Can somehow help me start the phone. I have no backups or cwm but i mite be able to get cwm installed somehow. any suggestion?
rico25new said:
i rooted my Samsung Galaxy Quattro i8552 yesterday by installing cwm(miracuously i tell you) but after i started phone the cwm got erased and stock recovery got rewritten, so now i have stock recovery. I installed lcd modder and changed the dpi and it said restart and since then phone is not starting. I can goto recovery and download mode and i started adb and deleted the build.prop file from /system. now i cant push it also. Can somehow help me start the phone. I have no backups or cwm but i mite be able to get cwm installed somehow. any suggestion?
Click to expand...
Click to collapse
since your able to get into download mode, get odin and download the stock firmware from Sammobile and find the correct phone model/carrier/country and flash it in odin.
rico25new said:
i rooted my Samsung Galaxy Quattro i8552 yesterday by installing cwm(miracuously i tell you) but after i started phone the cwm got erased and stock recovery got rewritten, so now i have stock recovery. I installed lcd modder and changed the dpi and it said restart and since then phone is not starting. I can goto recovery and download mode and i started adb and deleted the build.prop file from /system. now i cant push it also. Can somehow help me start the phone. I have no backups or cwm but i mite be able to get cwm installed somehow. any suggestion?
Click to expand...
Click to collapse
Is your phone a Verzion phone, sounds like a bootloader issue.
---------- Post added at 01:57 PM ---------- Previous post was at 01:55 PM ----------
mrwetwork said:
Is your phone a Verzion phone, sounds like a bootloader issue.
Click to expand...
Click to collapse
check this out it might help..
forum.xda-developers.com/showthread.php?t=2449258
mrwetwork said:
Is your phone a Verzion phone, sounds like a bootloader issue.
---------- Post added at 01:57 PM ---------- Previous post was at 01:55 PM ----------
check this out it might help..
forum.xda-developers.com/showthread.php?t=2449258
Click to expand...
Click to collapse
its a dual sim phone which is gsm, verizon is cdma
ok thanks,i reflashed it and it worked, plus i flashed stock one so i got warranty back and ota updates also started ^^
Related
Help,
I rooted my VZW s3 and all was good until i tried to update to a CM10 rom..
It would not install the zip file.. I followed all the guides about backing up the imei file ect.. and I used the correct recovery.. it would not install..I kept getting erros with the ROM zip files I downloaded. so i tried the ez recovery app and installed TWRP.. I like that and have used it in the past.. well I forgot that I cant restore a backup from CWM. so now im stuck bootlooping into TWRP recovery.
Any help?
I was installing TWRP while my GF was talking to me. Not that I'm blaming her or anything but I failed to add the "dd" during the manual install. Now I'm downloading the stock rom and going to try Odin to get my phone functioning again.
Twrp doesn't support kexec, so it will only boot stock based ROM's
sent from locked bootloadrer SGS3 running a custom kernel
wera750 said:
Twrp doesn't support kexec, so it will only boot stock based ROM's
sent from locked bootloadrer SGS3 running a custom kernel
Click to expand...
Click to collapse
can somebody send me a link to a stock rom so I can start this over?
I cant even get adb to recognize my device when its on.. I only have TWRP bootlooping into recovery...
Thanks..
sidn3y said:
I was installing TWRP while my GF was talking to me. Not that I'm blaming her or anything but I failed to add the "dd" during the manual install. Now I'm downloading the stock rom and going to try Odin to get my phone functioning again.
Click to expand...
Click to collapse
Not saying this will help you, but it did with me. I have no idea how.
Tried vol down/home/power and it booted into the custom rom screen. Cancelled that. It rebooted normally..
---------- Post added at 09:48 PM ---------- Previous post was at 09:48 PM ----------
kwiksilvr said:
can somebody send me a link to a stock rom so I can start this over?
I cant even get adb to recognize my device when its on.. I only have TWRP bootlooping into recovery...
Thanks..
Click to expand...
Click to collapse
http://stockroms.net/file/GalaxyS3/SGH-I535/StockROMS.net-SCH-I535_VZW_Verizon.zip
My Galaxy s+ is in trouble. I flashed CM10.1 on it, wich worked fine, but then i wanted to flash the gapps, and now i'm stuck in cmw bootloop. I can't select anything in cmw, so the only thing i can do is get it into download mode. My pc does see the phone, but the problem is, odin doesnt.
Pleas help me guys...
Wolfkie40 said:
My Galaxy s+ is in trouble. I flashed CM10.1 on it, wich worked fine, but then i wanted to flash the gapps, and now i'm stuck in cmw bootloop. I can't select anything in cmw, so the only thing i can do is get it into download mode. My pc does see the phone, but the problem is, odin doesnt.
Pleas help me guys...
Click to expand...
Click to collapse
Have u tried different versions of ODIN? I had same problem and that help for me.
---------- Post added at 02:08 PM ---------- Previous post was at 02:02 PM ----------
ODIN Multi Downloader v4.43
That worked for me.
Installed CWM 6.0.1.0 and rooted this device then installed a 10.1 nightly, wiped dalvik and all but now device boots straight into recovery after samsung 10.1 logo.. I've already tried flashing back to the stock rom using Odin, flash went fine but now it just boots into stock recovery instead of CWM.. also a bit of weirdness to it.. when i click on reboot system it just turns the device off instead of "rebooting", i've tried wiping everything and nothing seems to work.. was for sure the stock rom from sammobile would do the trick but nope ... any suggestions? Thanks.
Perhaps flashing v6.0.3.3 might work. :beer:
http://forum.xda-developers.com/showthread.php?p=41159669
dynospectrum said:
Perhaps flashing v6.0.3.3 might work. :beer:
http://forum.xda-developers.com/showthread.php?p=41159669
Click to expand...
Click to collapse
Thanks for the help but this didn't work either flashed with odin just keeps going to recovery when booted ...
Neoborn1 said:
Thanks for the help but this didn't work either flashed with odin just keeps going to recovery when booted ...
Click to expand...
Click to collapse
Did you ever figure this out?
I have a 5113 doing the exact same thing. I posted a thread on here but i dont think anyone has an answer.
---------- Post added at 07:59 PM ---------- Previous post was at 07:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=2404899
Above is the thread that details what is happening with mine. Sounds like the same issue to me.
Hello all,
I have been going slightly mad today trying to get my mate 7 2GB back from CWM to stock recovery. The main problem is that I do not have a stock recovery image. But after being shown where to find one, I noticed that I could not get it successfully flashed either.
Since I do not really know how to do this, I used flashify, but that did not work and either returned me to the CWM or sent me to rescue.
Can someone help me to a) get a stock recovery image for the Mate 7 version MT7-L09 and b) show me how to properly flash it?
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
djzero86 said:
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
Click to expand...
Click to collapse
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
dekraan said:
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Click to expand...
Click to collapse
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
Ali_adel_medo said:
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
Click to expand...
Click to collapse
You have a unlocked bootloader???
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Ali_adel_medo said:
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Click to expand...
Click to collapse
Do you tried flash via fastboot ?
fastboot flash recovery recovery.img
Or try to use this tool
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
This should work.
The fast boot just stucks at waiting for device
And the tool you send says that the stock recovery works only on tl_09 and my device is tl_10
djzero86 said:
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
You have a unlocked bootloader???
Click to expand...
Click to collapse
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
dekraan said:
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
Click to expand...
Click to collapse
Ok.... you have the stock recovery now???
djzero86 said:
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
Ok.... you have the stock recovery now???
Click to expand...
Click to collapse
I think so. If stock looks like I described: black screen, large EMUI logo, and the options reboot system now, wipe data/factory reset and wipe cache partition?
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
djzero86 said:
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
Click to expand...
Click to collapse
Great, thank you for your fantastic help!
I will get a new micro-sd card tomorrow, and will try it right away!
Good luck... come back to report
djzero86 said:
Good luck... come back to report
Click to expand...
Click to collapse
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
dekraan said:
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
Click to expand...
Click to collapse
Ok, I just reinstalled the B137P03 version from the how to install lollipop thread, and that went successful. Now going to try the update.zip! Keep you posted
Ah, now we're talking It seems to have worked. Phone is now showing 'Android is upgrading' and 'optimising app.....'
Great! It does seem strange I had to reinstall the B137SP03 rom, but that did the trick!
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
kuky6789 said:
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
Click to expand...
Click to collapse
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
so u can not go in download mode?
asadnow2k said:
so u can not go in download mode?
Click to expand...
Click to collapse
I can get into download mode yes, but not into recovery?
yasteellutch said:
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
Click to expand...
Click to collapse
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
kuky6789 said:
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
Click to expand...
Click to collapse
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
yasteellutch said:
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
Click to expand...
Click to collapse
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
kuky6789 said:
I can get into download mode yes, but not into recovery?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24459283995310257
flash with this firmware and post results.
kuky6789 said:
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
Click to expand...
Click to collapse
Np
---------- Post added at 10:29 AM ---------- Previous post was at 10:28 AM ----------
yasteellutch said:
Np
Click to expand...
Click to collapse
Be careful next time